Nice. Looks to be basically the same thing as my GX CS3-I I grabbed from Amazon about 8 months ago now. Zero issues thus far but grabbed Amazon’s extended 4 year warranty in the event something fails. GX also makes a lithium battery powered version now. Not something I have a need for, but a neat idea.

@AirRifleActivities

2 жыл бұрын

Thank you, friend 🙂 That's sth I may look into. That Lithium battery thing sounds interesting.

Nice to see more off these coming out I use the Nomad 2 and that cost me a fortune!!!!!! Another great video...

@AirRifleActivities

2 жыл бұрын

Thank you kindly, Keith. That thing works great so far, I hope it doesn't disappoint in the long run either. Thanks for watching, mate, these fear update videos are usually of little to no interest at all.

Such of a great video brother! 👏 great job. Congrats

@AirRifleActivities

2 жыл бұрын

Thank you, Manny 🙂🤝

Looks like a good investment depending on your day to day needs. As long as people know these aren’t industrial conpressors

@AirRifleActivities

2 жыл бұрын

Well said, Pete, thanks 🙂🤝

Sold! Just ordered. Thanks for sharing.

@AirRifleActivities

Жыл бұрын

Thanks, mate, I'm glad I could be of assistance 👍

Don't know what the manual says but it is important to open the filter to let it dry after pumping your gun. I second some of the comments about getting a tampoon style cotton filter/moisture trap of some kind , that small one supplied with the Yong Heng for example is sufficiant for filling your gun and can be re-used a couple of times after it has dried out. Important to open this to let it dry as well, otherwise the inside of the filter housing and the fittings will start to corrode and rust. Been thinking of adding a gx compressor in some form to my arsenal, could come in handy some times. Nicely edited and interesting video as usual, thanks for sharing Alex. 👍

@AirRifleActivities

2 жыл бұрын

Thank you, Hasse, for the tips too. GX contacted me about a fortnight ago. Something I may look into. Cheers 🤝

I have the BSA version, fantastic bit of kit gets used every day, would not go back to a bottle now. Make sure you leave the car engine running if using it on 12v I bought the Tuxing filter from China it's 300mm long but does a great job removing moisture. set up with quick connectors so easy to fill multiple guns.

@AirRifleActivities

2 жыл бұрын

Thank you, Mike 🙂 For the tip too. As for the car engine running - I expressly stated it in the video.

@mikerichardson4240

2 жыл бұрын

@@AirRifleActivities Going to cut off the croc clips and install an Anderson connector next week then it will just plug in, no need to lift the hood/ bonnet of the car. The great thing about the Anderson connector is you can only connect it one way so no risk with polarity issues in the dark. They can be found on ebay for around £10 or 11 euro

Great video, good information 👍

@AirRifleActivities

2 жыл бұрын

Thank you, Nigel, I hope it was useful at least to some extent.

I've got the BSA version, and it's brilliant, well worth the investment 😎

@AirRifleActivities

2 жыл бұрын

I'm sure it's a good one, John, thanks.

Awesome video bro. Looks exactly like my GS CX 3. Only thing I'd suggest brother is if you live in a high humidity area I'd say get an external water separator for it. The water separator is a simple small cotton filter with these compressors.

@AirRifleActivities

2 жыл бұрын

Cheers, bud 🤝 A lot of people say the same.

@newmexicoairgunner9883

2 жыл бұрын

@@AirRifleActivities I got a tuxing filter with 2 filter inserts on Amazon for about $50 US. They've gone up since then though

Brother…I would definitely put a moisture filter on this unit. JS🤷‍♂️ A small tampon type filter is 20$. Your investment in PCPs are Thousands!

@Airgunfunrich

2 жыл бұрын

I agree not sure if trust that filter to keep moisture out looking at the amount came out when bleed screw was undone..

@heathhalfhill6401

2 жыл бұрын

@@Airgunfunrich I have 2 Yong Heng compressors and a Spritech AC/DC compressor that “Sounds” exactly like the one you have. It came with a small tampon style filter. I change it out about every 6-8 fills. Honestly I only use it when my tanks are low ie…3000 PSI and a few of my gun want 4350 PSI like my Liberty,and my Avengers long and Bullpup. It tops them of fairly quick since I used the remains of the tanks to bulk fill. It only runs for maybe 3-5 minutes and the temp NEVER hits 50C. I let the fan run till the temp is below 30C. For what ever reason it will not work on my LCS SK-19🤷‍♂️. The air keeps coming out of the bleed valve after filling to 250 Bar. Do have any suggestions for this issue sir? I drained the air out, removed the foster fitting, cleaned and greased with silicon grease yet it seems as though the bleed screw doesn’t allow enough flow to close off the valve on the foster fitting. I hope you know what to do cause several others don’t even get what’s happening🤷‍♂️💯

@Airgunfunrich

2 жыл бұрын

@@heathhalfhill6401 someone on one of the forums had same problem I’ll se if I can find it for you

@AirRifleActivities

2 жыл бұрын

Thank you for the tips and your comment, boys. For watching too 🙂 Heath, I hope you find a solution to that weird problem.

A good review buddy 👍. I'd be knackered without a compressor. No need for large bottles etc.

@AirRifleActivities

2 жыл бұрын

A useful device indeed, mate. Thank you.

I have been pretty much every route for pcp filling. My gx cs3 has put my scba bottle and omega compressor into retirement. With direct filling from this portable compressor there is no sacrifice of how much air is left in the scba bottle.

@AirRifleActivities

2 жыл бұрын

True story, Mike.

That inline filter is totally inadequate for the job of trapping the moisture. I put a double inline water/oil filter trap in addition to the supplied single on my mains compressor. You can buy them cheap on eBay. The mains powered model fills my 7 litre 300 bar bottle without any effort. I've had it three years now and it has paid for itself already at £134 delivered. Mind you the prices have increased a bit since then but if you shop around Inthe UK you can get one for about £175. Brilliant little compressor treated with care. I'm fortunate that my job as a fire service breathing apparatus instructor trained me in compressor maintenance and repair so I appreciate how vital maintenance is.

@AirRifleActivities

Жыл бұрын

Thanks for the comment and the tips, Steve 🙂

I think you`ve put this over in a very clear way and with GOOD Info >> Thank You >> how much is it please ?? > OK, $539

@AirRifleActivities

Жыл бұрын

Thanks for watching, mate 🙂

Hola muy bueno ese compresor acá en en chile lo compran mucho saludos

@AirRifleActivities

2 жыл бұрын

Gracias, hermano. Good to know it's a unit that has already managed to get recognition in Chile 🙂

The safest way to connect to a car battery is to connect the red clip to the positive terminal first and then connect the black clip (ground) to something on the engine/chassis away from the battery. Car batteries *can* generate hydrogen gas and you really don't want a spark near a hydrogen/oxygen mix. Is it likely that you'll get a BANG with modern car batteries? Dunno, but changing the order of connecting clips so that any spark made when you complete the circuit is far away from the potential gas generator will reduce that possibility.

@AirRifleActivities

2 жыл бұрын

Thank you, Mark. I admit I wasn't aware of that 🤝

@markflacy7099

2 жыл бұрын

@@AirRifleActivities To be honest, I don't know of any case in relatively modern times (we are talking from late last century) where there was such a hydrogen gas explosion from a lead-acid battery due to an electrical spark. Maybe that was because of training but it may well have been because most modern batteries running with modern charging systems don't generate a lot of hydrogen gas even in the worse case. Still, if it doesn't take a lot of effort to make the spark that happens when you complete a circuit occur away from the potential problem, then you should try to do it that way. This advice includes jumper cables as well!

SHOW MUITO TOP ESTE COMPRESSOR PARABÉNS QUE COISA BOA UM COMPRESSO.

@AirRifleActivities

2 жыл бұрын

Thank you, brother, it's a useful item indeed 👍

@NYLSONQUASEACERTA

2 жыл бұрын

@@AirRifleActivities verdade

Very nice 👌 👍

@AirRifleActivities

2 жыл бұрын

It really is a good device, thanks, mate 🙂

Espectacular muy bueno 👏👏👍👍💪💪🇦🇷

@AirRifleActivities

2 жыл бұрын

Gracias, hermano 🤝

Looks like a nice little unit. Do you still have it? If so, how’s it holding up?

@AirRifleActivities

Жыл бұрын

It really is, still works flawlessly.

@visamedic

Жыл бұрын

@@AirRifleActivities Nice. I’m still watching other reviews, but I’m leaning towards this one. Thank you. 😁👍

Nice video! Didn't hear about this one before but i've had several similar devices GX, VEVOR, etc. and while they do the job they do spit out wet air sooner or later.

@AirRifleActivities

Жыл бұрын

Will watch out for that, mate, thanks 🙂

@jakobiller

Жыл бұрын

@@AirRifleActivities Definitely do! :) In my case it always happens when i use these type of compressors for fills close to each other, like when tuning and you constantly need to refill. If you bleed off the valve and you feel wet air coming out chances are high it will spit wet air through the hose if you use the compressor again within the next hour. I always run the device unconnected from the rifle and hold the hose close to my skin or lips to sense if the air is dry or wet. Sometimes this is not even needed as you can literally see drops flying out. Changing the tampon in the connector will not stop this. If air is wet i would advice to let it run unconnected for a couple of minutes, do the skin/lip test again, before hooking it up to your rifle. Good devices for travelling and quick fills. Not recommended for heavy use iow many fills per day bc of wet air issue. Learned the hard way :)

@AirRifleActivities

Жыл бұрын

@@jakobiller thanks for the tips, brother 🙂 I definitely don't use mine ona regular basis - at least at this point.

My Leshiy's plenum went rusty because of a small Chinese compressor. Be careful make sure your air is dry like breathing air from a diver's tank

@AirRifleActivities

2 жыл бұрын

Thanks for the tip, Dave. I'll watch out for excessive moisture in my gun. I still use my diving tank too.

Does it filter water from the atmosphere so it doesn't pump water into your gun?

@AirRifleActivities

2 жыл бұрын

That's what the manufacturer says, Dave - that it's a particle and moisture filter.

Hi, will it fill a 3L scuva dive bottle? And if so what time it takes?

@AirRifleActivities

Ай бұрын

I think it's rated up to 2 liters, mate. Check the website of the manufacturer. I haven't tried a 3 liter bottle with this compressor. I'm not affiliated with that brand, I just made a review of the unit. Thanks for watching.

@ZaspoxZaspox

Ай бұрын

@AirRifleActivities hello, its me again, I have the 3L, smaco compressor can refuil 0.5 to 4L scuba bottle, my 3L refuil easily take about to 40min, 40min with some "used" air already inside

do you fill up to 300bar??

@AirRifleActivities

Жыл бұрын

Yes, you can fill up to 300 bar a tank with a volume of about 1 or 2 litres.

اخي العزيز لماذا تعبئة edgun leshiy 2 فقط 200 bar ? هل ممنوع التعبئه 300 bar في ساعة البندقيه

@AirRifleActivities

Жыл бұрын

No, it isn't forbidden, buddy, I didn't fill it all the way to save time and make it less boring for viewers.

@omrish7175

Жыл бұрын

@@AirRifleActivities شكرا على المعلومه 👍

How’s it holding up?

@AirRifleActivities

Жыл бұрын

Still working flawlessly.

@Alex-oy6wb

Жыл бұрын

@@AirRifleActivities ok going to buy one along with my first pcp…Notos

Will it fill a 7 litre bottle

@AirRifleActivities

Жыл бұрын

No, mate, it won't. Like I said in the video - up to 500 cc.

Price thanks

@AirRifleActivities

2 жыл бұрын

Raul, use the link in the description, thanks.

@nerotsirc5043

3 ай бұрын

​@@AirRifleActivitiesIt doesn't work

@AirRifleActivities

3 ай бұрын

@@nerotsirc5043 it's an older video of mine, they must've changed something... Try googling "smaco". But better yet wait for about a week or so - I'll release a video of a much better unit 🙂

😆🖤😍👍

@AirRifleActivities

2 жыл бұрын

Cheers 🙂

Got s Normad ll 👍

@AirRifleActivities

2 жыл бұрын

I hope you're happy with its performance, Edgar 🙂

👍🇪🇸💀🇪🇸

@AirRifleActivities

Жыл бұрын

Cheers for the thumbs up 🙂