In-Situ CBR Testing

Ғылым және технология

The In-Situ CBR test carried out in the UK. This test is used to measure sub grade or formation strength for road design and construction. This is the definitive method of measuring CBR values on-site. Performed by Hixtra Ltd.

Пікірлер: 31

  • @Odd_Krieger
    @Odd_Krieger4 жыл бұрын

    This channel is seriously underappreciated like these video from your channel really are informative compared to most of the videos i've ever watched. Thanks for the loud and clear instructions

  • @TimothyMoananu
    @TimothyMoananu6 жыл бұрын

    Watching this from New Zealand! Great video

  • @civwaz
    @civwaz3 жыл бұрын

    thank you for your efforts .. really helpful

  • @alexandersmith2465
    @alexandersmith24656 жыл бұрын

    Great video mate. Thanks for sharing.

  • @kmatson07
    @kmatson077 жыл бұрын

    This is very helpful, thanks, all!

  • @mrboloski
    @mrboloski5 жыл бұрын

    Great video and very informative.

  • @highwayguidecivilwalk
    @highwayguidecivilwalk5 жыл бұрын

    Great work you have been super liked by Civil Engg testing walk

  • @theinmin5808
    @theinmin58085 жыл бұрын

    Thanks you very much for knowledge sharing..

  • @thejaskp5277
    @thejaskp52776 жыл бұрын

    Good information, Thank you

  • @mathewkimosop1736
    @mathewkimosop17362 жыл бұрын

    thanks for the video

  • @alexandersmith2465
    @alexandersmith24656 жыл бұрын

    53,972 view and no comment/appreciation/thanks etc. This video helped me learn In-Situ CBR test. Thanks heaps.

  • @matgeofik
    @matgeofik3 жыл бұрын

    This video is really helpful but can u show us how to read the data,

  • @mark.k440
    @mark.k4406 жыл бұрын

    That was quite interesting to watch, I did notice that the appearance of the ground changed at 5m 39s from the earlier frames. Can you tell me why?

  • @Hixtra

    @Hixtra

    5 жыл бұрын

    Well spotted, the video was cut from a couple of CBR tests

  • @momnakhan5679
    @momnakhan56796 жыл бұрын

    I need your help to buy these equipments

  • @FancyAnimal
    @FancyAnimal3 жыл бұрын

    How would you jack the truck in CBR 3%....tilled farmland?

  • @Hixtra

    @Hixtra

    3 жыл бұрын

    Hi Fancy, we would use some wooden boards under the jacks to increase their surface area

  • @CivilengineerMM
    @CivilengineerMM6 жыл бұрын

    nice

  • @teebamohammad7142
    @teebamohammad71425 жыл бұрын

    شكرا جزيلا thanks

  • @telecaster5252
    @telecaster52523 жыл бұрын

    Good video. Do you have a weight in the back of the Ute to push against?

  • @Hixtra

    @Hixtra

    3 жыл бұрын

    We do yes, 600kg of steel blocks

  • @abdullahaydemir7918
    @abdullahaydemir79187 жыл бұрын

    thats ıncredıble test for soıl mechanıc thx dude

  • @lembrismollel8199

    @lembrismollel8199

    5 жыл бұрын

    Nice

  • @ahmedanamohammed7642
    @ahmedanamohammed76427 жыл бұрын

    Good

  • @naxorodriguez92
    @naxorodriguez925 жыл бұрын

    Hello. Do you compare your results with some lab CBR with the same soil?

  • @Hixtra

    @Hixtra

    5 жыл бұрын

    Insitu and Lab CBRs will likely be quite different because of the constraining effect of the lab CBR mould, compactive effort and such like for coarser grained materials. Undisturbed fine grained samples for Lab CBR should yield similar results to Insitu CBR tests.

  • @Thompson14t
    @Thompson14t2 жыл бұрын

    Tero - is that you??!!!

  • @tshepomokemane2356
    @tshepomokemane23563 жыл бұрын

    What are the impacts of CBR testing on the environment

  • @kevcat8655

    @kevcat8655

    2 жыл бұрын

    There are no direct impacts at all. It's non-invasive testing as the video quite clearly shows. However, indirectly, the use of a vehicle to get to the site will of course emit emissions, similar to all other site activities. But this is 'scraping the barrel' to appease your question.

  • @mojjutubkanal

    @mojjutubkanal

    2 жыл бұрын

    As you can see devastating :D

Келесі