Simple and effective, saved me time wondering how to connect the wireless in-ear in rehearsal. Thanks!

@therockstudio

2 жыл бұрын

Thank you!

Great tutorial GOD Bless you for helping others out like myself that are less technical savvy...it help alot!!!

Hiya, Just a quick thank you. This video was a big help. Thanks again.

Wonderful. Great video. Clear and concise. Thank you so much. Very helpful. Wishing you great and continued success!

@therockstudio

4 жыл бұрын

Thanks for watching!

Now can you use any transmitter with any receiver because I bought a used transmitter on ebay with no body pack

@therockstudio

3 жыл бұрын

Just look at the frequency range of the transmitter, on the sticker on the bottom / rear. It will tell you the frequencies and maybe the band that the transmitter is capable of producing. For instance: "G20 488-512 MHZ". So then you'll look for a receiver with the same exact frequency specs.

@eddgutierrez5811

3 жыл бұрын

@@therockstudio thanks

Can u make a video showing how to set up the body pack (those 4 switches inside) thanks!

@therockstudio

9 жыл бұрын

Sorry, I don't have this unit any longer.

Really helpful! Thanks!

Great video. I can't seem to find the answer to my question which is: I'm looking at getting the Shure PSM300 model. It only has TSR cable inputs on it. I assume I use a TSR to TSR cable for this? I just simply see cables labeled as instrument and speaker cables.

@therockstudio

7 жыл бұрын

Ryan Steinacher you mean to search for TRS! Hosa HSS-010 REAN 1/4 inch TRS Pro Balanced Interconnect Cable, 10 feet www.amazon.com/dp/B006EE7FEA/ref=cm_sw_r_cp_apa_7tAEyb3A2PCZW

@ryansteinacher7534

7 жыл бұрын

I found what I needed about 5 min after posting. Needed to look under patch cables. Typing TSR is just embarrassing now... lol. Thanks for the fast reply!

Hi, if I have 8 wireless in ear monitor sets. How am I going to connect to the Mixing console? Thank you

@therockstudio

9 жыл бұрын

If you want 8 individual mixes, you'll need a console with at least 8 auxes. Or else, you will have to share mixes between the 8 wireless systems, ie. 4 units on Aux 1, 4 on Aux 2.

Awesome video! Very helpful.

Does this connection give you stereo in your in ears?

Nice review! Very helpful!

@therockstudio

7 жыл бұрын

tuesdays rain thank you!

Can i buy extra beltpacks and use all of them at the same time with the same channel?

@therockstudio

7 жыл бұрын

Celestial Warrior yes. As many as you'd like.

Will mackie vlz4 will work for in ear monitor system for drummer this is wired version

@therockstudio

6 жыл бұрын

Thang Lian Cin yes, any mixer with at least one aux send can be connected to a wireless in-ear system.

Hiya, I have a desk that has effects etc coming out of the aux sends...is there another way to connect the IEM.

@therockstudio

9 жыл бұрын

craig davson If you have no extra Aux sends available, you can still connect the IEM system. However, you will not have a dedicated monitor mix. You would connect the IEM from any other buss that is available. For instance, you can come out of the stereo buss, a "record out", or matrix output. You can even take your signal from the "pass thru" on the rear of a powered main speaker, or monitor speaker, of from the "pass through" on the back of your main PA amplifier. Otherwise, you can come out of the Direct Out for whatever channels you'd like in your ears, and connect them to a second small mixer, or if there is only one or two channels, you can take the "Direct out" from the main mixer, and connect them to the inputs of the IEM and use its own mixing capabilities to adjust the level.

@craigdavsoncd

9 жыл бұрын

therockstudio Hey thanks for this, really appreciate you getting back to me.

Im still a bit confused on how would I connect my IEM's (Shure PSM 300). I'm running Ableton through a mac. I have a 1/8" to two 1/4" stereo splitter cable coming out of the mac *Please correct me if I'm wrong* If I connect my 1/4" cables to my soundboard mixer, would I then just simply connect my IEM's to my soundboard mixer to hear the click and loop? We want to hear click and loop in the IEMs while still only sending loop to FOH.

@therealyungjayz

7 жыл бұрын

We just switched it up. Now we have the Apogee Duet (Firewire) audio interface. We have the Duet connected to my mac. I have click and cues coming out from the left output of the Duet and FOH loop coming out the right output of the Duet. We have a TRS 1/4" male to male balanced cable connected directly to our IEM transmitter from the left output of the Duet (click/cues) and we have a balanced TRS 1/4" male to xlr male cable connected directly to our soundboard from the right output of the Duet (FOH loop). Then we have a TRS 1/4" balanced cable male to male coming out of the AUX Send 1 from our mixer that connects to our IEM transmitter, so we can hear loop, mics, guitars (everything that's connected to our mixer)

@therockstudio

7 жыл бұрын

sorry I missed your question. Glad you got it going.

@therealyungjayz

7 жыл бұрын

No problem. It was definitely a process to finally get 'em going. I might still contact our sweetwater sales engineer for a better way to set it up, but for now this will work

@therockstudio

7 жыл бұрын

Jay Z I'm going to make a new video about setting up click and cues. check back!

@therockstudio

7 жыл бұрын

I just uploaded a new video about setting up a click and sample scenario. kzread.info/dash/bejne/Z3aW0axyZNncfpc.html I hope this helps!

Can I use with audio interface like Focusrite?!

@therockstudio

4 жыл бұрын

You certainly can. You can use in-ear monitors just like headphones, out of the headphone jack. Or, you can use an output on any interface to act like an aux send, and feed your ears a special mix out of that output.

Hi there. What cable did you use to go from the ipod to the mixer? I noticed it is split, why is that? Also you are using a trs to alr cable to the transmitter, would a trs to trs do the same thing? or is the xlr changing it to mono?

@therockstudio

5 жыл бұрын

Hi, thanks for watching! The iPod is connected with a stereo cable - 3.5mm (or 1/8" headphone connector) to left & right TS (1/4") plugs. The transmitter is connected with a TRS to male XLR. TRS isn't a stereo connector (such as the headphone connector), it is a balanced connector (the same as an XLR). So if your transmitter has a TRS input, you can use just a TRS-TRS cable. I just happened to have a TRS-XLR male cable handy when I made this video. Feeding one aux into the transmitter will only be mono, no matter which cable you use. If you want stereo, you have to use two aux sends and two cables.

@rorybackshell9580

5 жыл бұрын

@@therockstudio thanks for getting back to me, that does make things clearer. I just have one more question an then I will stop bothering you. Does the cable from the IPod to the console have to be a 3.5 to dual ts cable? Or can it be a 3.5 to 6.5 trs cable?

@therockstudio

5 жыл бұрын

@@rorybackshell9580 in the preamp of the console there is a differential amplifier, which you can read about more, but I'll give you a quick explanation: the T & R (tip and ring, or L and R of an XLR connector) are the signal, but 180° out of polarity. The differential amp will join them back in to polarity, and discard any difference between the two, thus cancelling any noise the cable may have picked up along the way. So if you feed your left and right iPod into a TRS cable and then into one channel of your mixer, the differential amp within the preamp may remove some of the music information. So it's best to split the left and right out of your iPod into two channels, because remember TRS 1/4" connectors are not stereo, they are balanced (meaning one positive signal, one inverted signal, one shield). You can find 3.5mm to mono TS or XLR, but they usually have some resistors and capacitors in them to sum the left and right to mono and block phantom power (which is likely to damage your headphone output). Check out sescom cables www.sescom.com/products/view/category/categoryslug/smartphone Or my typical cable, the hosa CMP-159 There cable in the video I made myself.

@rorybackshell9580

5 жыл бұрын

@@therockstudio thank you very much! You have been extremely helpful.

will anymixer board work for in ear monitors

@therockstudio

8 жыл бұрын

+zwright80 Pretty much, yes. To be utilized in a standard fashion, however, your console must have at least one auxiliary output.

Hi. I am looking for a way to set up six receivers all to one box but to different parts of a mixer. Can you help please?

@therockstudio

7 жыл бұрын

I can help, but remember that a transmitter can send only one mix. So, if you want to send more than one mix at a time, you'll need more transmitters and receivers.

@nahumpina2137

7 жыл бұрын

About how many of them would I need for a small band then?

@therockstudio

7 жыл бұрын

Nahum Piña that depends on two things: First, how many aux (mix) outputs does your console have? Most small-format (up to 16 channels) have four auxes that are appropriate for monitor mixes. That means you will be able to send four separate mixes to the band. So you could have four complete systems. Second, how big is your band? How many people in the band need their own mix, and how many can share a mix? If there are four people in the band, but only the singer needs a different mix then the rest of the band (the rest of the band is happy sharing one mix), you only need two transmitters and four bodypack receivers. I hope this helps.

I am a keyboardist and use several keyboards with my own console. I just got my in ear monitor system, when I go to a gig or perfomance with my group what it would be the procedure with the sound guy in order to use the In-ear system? Thanks in advance.

@therockstudio

8 жыл бұрын

hi! I am assuming you plug your keyboards into your own mixer at the gig? You would then give the sound person a feed from your mixer, and also hand him/her the transmitter for your wireless ears. The sound guy/girl will hook your transmitter up to a spare aux send on his/her console, and send you whatever you need in your ears, including your keyboards. You would only be responsible for balancing the levels of your keys in relation to one-another, usually during sound check. That way any of your keyboards will be the same volume going to the PA console as well as your ears. Thanks for watching.

@leonardovmusic

8 жыл бұрын

Thank you!

@leonardovmusic

8 жыл бұрын

Should I have any kind of cable or adaptor? in case the sound guy/girl says "I dont have this or that for you to use the in ear system"

@therockstudio

8 жыл бұрын

Sorry for the delay, yes. I'd have some cables handy. Depending on your transmitter, of course. In this video I use a TRS to XLR Male cable, which works if the sound person's console has TRS Aux outputs, and your transmitter has XLR inputs. If your transmitter has TRS inputs only, then have a 6 or 8 foot TRS cable. Remember, you can extend a TRS to XLR cable with a standard XLR cable, but it is way more difficult to extend a TRS cable. I'd have a 6' XLR cable on hand as well, just in case the console has only XLR outputs, or you're coming out of a return on a snake, etc. Be sure to LABEL your cables and hardware (including power supplies) well, or you will lose them quickly.

how do I set up a separate mix for multiple people?

@therockstudio

4 жыл бұрын

Let's say there are four people needing four separate mixes. For this you'd need four wireless monitor systems (transmitters, receivers, & in-ear monitor earbuds), and a mixer with at least four aux sends (called monitor mixes, or just simply mixes). Each wireless transmitter gets connected to it's own aux send. Then you can create a different mix for each of the four people by using the aux knobs.

@VertesaGaming

4 жыл бұрын

@@therockstudio i stayed up all night figuring it out and i figured it out

@VertesaGaming

4 жыл бұрын

@@therockstudio ive got a diagram and its going to rquire two mixing boards Lmao. Trying to use the equipment we have already.

@therockstudio

4 жыл бұрын

@@VertesaGaming ahh! Ok. It's difficult to find small-medium consoles with more than 4 aux outs. That's why, these days, it's more economical to buy a digital console, even some of the small ones have at least 6-8 auxes. For an analog board to have more than four, you'll need at least a 24 channel console. Glad you figured it out!

@VertesaGaming

4 жыл бұрын

@@therockstudio yeah i figured i could do a computer to a DI box, DI box to my mixing board, monitor into my board, mute my monitor so it o ly cones through my headphones, run the main out fron my mixing board to a headphone splitter, headphone splitter into the kack inputs on the bands mixing board, monitors for bands into the same inputs but on the xlr, then that baord has individual outs so ill either runs those to a transmitter or to everyone indavidually with an aux extension cable. I just have to see if that one channel will take inputs from two seperate things.