The amount of "I don't have the correct tool, but I have *a* tool" that takes place in this video is staggering! Amazing craftsmanship when you've got so many limitations

@Wellorep

2 жыл бұрын

The correct tool is... the one that gets the job done..lol

@bank8489

2 жыл бұрын

There is no such thing as the correct tool.

@areyouundoingthatorwhat9181

2 жыл бұрын

Ingenuity comes hand in hand with over complicating stuff for the sake of it😁.

@kevinsellsit5584

2 жыл бұрын

I got a kick out of the 775 motor powered cut-off machine.

@NetworkOverflow

2 жыл бұрын

They always say: "A good craftsman never blames his tools" I say: "A great craftsman makes his own tools!"

Noi lo vediamo così...in 20 minuti ma c'è un lavoro dietro impressionante. Tra progettazione, manodopera ed editing video ci vogliono giorni per costruire un progetto del genere. Hai tutto il mio rispetto 💪

@DanieleTartaglia

2 жыл бұрын

Mi fa piacere che vedete anche il dietro le quinte, grazie 😀👍

The idea with the transparent sorting mechanism from the laser cutter is genius. It looks like art and would be worth to be shown in a museum.

@denniswoycheshen

2 жыл бұрын

The bottom half doesn't even do anything really. All the sorting is done up top. It would be a little more elegant to incorporate the sorting into the laser cut section.

@Trenjeska

2 жыл бұрын

@@denniswoycheshen The sorting on SIZE is done on top, THEN the sorting on VALUE is done in the squiggly middle part. The bottom part just neatly stacks the coins.

@denniswoycheshen

2 жыл бұрын

@@Trenjeska sorry, in Canada the coins we use are different sizes, so there is no need to sort by value as well. :)

@denniswoycheshen

2 жыл бұрын

@@Trenjeska wait a minute, do you live somewhere where coins are the same size or something? The sorting is done first, the rest is just for show.

@paulbritton187

2 жыл бұрын

@@denniswoycheshen let's see your build then?

Beautiful project...as always! Thanks for sharing!

Awesome video, very well made and edited, no unneeded redundancy, perfect use of speedups and jump cuts , very nice POV and amazing project made with minimal tooling 10/10 👏I subscribed and Rang the bell 🛎

@kjellverbeke6058

2 жыл бұрын

unneeded redundancy is my new favorite redundancy

@TheMcSebi

2 жыл бұрын

"minimal tooling" > boots up the laser cutter

È fantastico vedere la dedizione e la massima cura nei particolari che metti in ogni piccola grande opera. Grazie di condividere le tue opere d’arte. 🤩🤩

This was amazing. I love the ingenuity going on here. A lot of thought has been put into this machine.

Veramente un bellissimo lavoro! Bravo Daniele! Mi piace molto la pulizia del progetto, l’accuratezza della lavorazione, e anche le sequenze che hai deciso di montare in modo interessante, chiaro e non pesante. Complimenti anche per i tanti attrezzi autocostruiti che hai presumibilmente fatto! Complimenti!

Ótimo trabalho! Like sempre!!! 👏👏👏👏🇧🇷

Favoloso! Bellissima la discesa delle monete a layer sovrapposti! Sempre una grande fonte di ispirazione!

Sei sempre fonte di ispirazione. È un piacere vedere costruire cose tanto elaborate

Well produced video. Amazing craftsmanship and creativity!

Isso é incrível! = It's incredible!

You are amazing you should think about putting out projects for kids to do and learn about electronics. We need more of you in this world for sure... Simply amazing skills and craftsmanship... I can't say enough great things about you!!

Looks like you had good fun on this project. Well done!

Amazing craftsmanship as always♥️😃

Nice machine👍 As idea for version 4.0: A mechanism to roll the right amount of coins in a package for the bank, maybe checked by weight like the bank does😊

That is the weirdest and most impressive coin sorting machine I have ever seen 🙂 Well done!

@elye3701

2 жыл бұрын

You ain't seen nuthin yet. Behold no-moving-parts - - - kzread.info/dash/bejne/qI6VtMmGf9KTeco.html

@kevinsellsit5584

2 жыл бұрын

@@elye3701 You were impressed by the US (4 coin type) coin sorter that required constant help from the operator to stack the coins because it did not have a vibrator function. Where this machine works flawlessly sorting 8 types of coins with one (1) moving part and counts them as well. Behold, I'm not impressed by this link.

@elye3701

2 жыл бұрын

@@kevinsellsit5584 I have used a kiosk coin machine at a Japanese supermarket. Just load in the coins. Collect the rejects and hand the receipt to customer service in exchange for a voucher. This adds too much bling. I bet there is no service manual to troubleshoot this in case of problems. What do you do in case the lights go out? 8 is just twice 4. There is nothing to limit you if you carve one yourself out of a piece of plank. What would impress me is a computer program that would, given a set of coins, control a milling machine to carve a suitable sorter. If you give me the machine above, I wouldn't take it. In fact you would have to pay me to take it. We have 5,10,20 and 50 denominations of coins. 1 is obsolete but you can still find them in the coin donation boxes. Then the central bank released a new set. So we have 9 denominations in total. Added to this you can find 10cents Singaporean, 100Baht and various Rupee coins with an occasional UK coin. In reality those of us helping to count the church collection face up to 16 sizes of coins. I don't think that machine above can handle this real world sample. An in-between size would enter the next bigger slot and get counted wrongly. Not even close and and no cigar. You have a low bar. I am not impressed.

Sir, from one engineer to another, you have some mad design skills!

Either you have too much time on your hands or that was too easy for you, whichever is more frightening. Brilliant and beautiful! Thank you!

This is a great coun machine. I really love it! The only thing missing from the video is how you get the coins out. That would be pretty cool to see.

@frenchimp

2 жыл бұрын

Actually you can't. The coins are lost forever. Unless the end section is open at the front...

You have achieved perfection, Sir! Next project would be a coin generator...

very satisfying to watch and am sure it's even more when building.

questa sorting machine è una eclissi totale per tutti gli altri video dello stesso tipo, veramente un gran lavoro :-)

Waw, very nice and exhaustive work. But your patience is highly appreciated, nice project.

Great ingenuity and beautifull too !

Excellent project 👍

That is incredibly satisfying to watch. Great work!

Meticulous work, and a joy to watch!

Interesting and cool to watch it work. I like your mini chop saw at 14:40 do you have plans for how you made it?

Excellent machine. You are the master

Che figata questo 3.0 è strabiliante, la complessità dei pezzi,rende ancora più fantastica la cosa.

"The project is very complex and complicated" The not explaining how you do it really helps!

You could keep track of how many coins are in each stack instead of the total. You could also add load cells to keep track of each stack weight then when a user removes coins from the stack (as long as it knows the avg weight of each single coin, could easily be done with constants in the arduino program) then it could automatically update how many are left/total amount.

@matthewhodge9748

2 жыл бұрын

A small spring that Is attached to a bucket, every time a specific weight is reached it drops coins it will be enough to make a roll. This way you always have rolls in the count not uneven counts.

@-_IT_-

2 жыл бұрын

Doing it by weight would not work considering that coins pick up grime which can alter the weight. It just would not be accurate.

@russelljazzbeck

2 жыл бұрын

@@-_IT_-there should be a minimum weight, like if it's heavier than a pristine coin from the previous value, then it accounts for all the added grime. either way, it's totally possible to have a range, or even make predictions with formulas that account for variations in weight, especially since those variations are extremely small

@yedead1

2 жыл бұрын

@@-_IT_- That's why you take the average weight, doesn't need to the exact weight just a ball park number (something like +/- 10-15%). Also its not like the load cells will have exact result, there will be differences between each cell.

Fantastico e strabiliante come sempre!

Watching you work is wonderful. Great stuff, and hello from your friends in Australia! :)

Very spectacular indeed !!

That custom saw using a cut off wheel blade is amazing!

Even with words, this video was fun to watch. Thank you.

Un GENIO!!!! Non c’è altro da aggiungere.

Sono a dir poco impressionato. Veramente bella. Rimarreri tutto il giorno a guardarla.

Это просто шедевр , автор очень креативный человек . Я ваш кумир )

da brevettare subito anzi prima di subito, complimenti sempre oggetti interessanti, che stupiscono, come la tua bravura

Rube Goldberg would be proud. Awesome build.

Красивая вещь получилась!

Good job. 16:08 Oops, the coin is stuck.

A M A Z I N G ! Bravo!

Watching my friend full support❤👋👍

Is this just a hobby you have or are you doing this for a living? What did you learn to gain the skills you have to build something like this. I'm still pretty young, but what you're doing is inspiring to me

Most coin sorting machines use a tear system with typicallt 1-5 cent category, 10-50cent category then €1 and 2 category. This way the sorting can be split 3 ways two times. The first sorting is typicallt with magnetic indukction, (simply by roaling past a magnet) second by width.

@bsvenss2

2 жыл бұрын

and? What's your point?

@jlucasound

2 жыл бұрын

@@bsvenss2 This machine is better. Right OVER your head. Wow.

La qualità che ti contraddistingue si evince da un kilometro! Materiali, progetti, riprese, stile, insomma non c'è niente che non sia al suo posto. Geniale inoltre l'idea di intrippare gli osservatori con il gioco di curve per far scendere le monete (come ti è venuta in mente?). Detto ciò, Daniele Tartaglia top maker in assoluto!

@DanieleTartaglia

2 жыл бұрын

mi è venuto in mente perchè volevo avere l' ordinamento preciso, dalla moneta di valore piu grande a quella piu piccola e ho ideato questo, ma se andavo a giocare a bocce facevo la meglio :-)

Very well done!

Pazzesco che lavoro, complimenti

Cool work ！ Just two things want to comment : - Future Coin edge design change (non cicular) - Non-euro coin (Else handling)

90 minuti d'applausi!! 😮👌

You could add another layer just after the coins are sorted for size to weigh the coin and if it is not right then reject it. I was not quite sure from just looking how coins get into the right level of the reorder mechanism so they come out in order of value? Very interesting project!

Complimenti!! Come sempre insuperabile, particolari curatissimi e precisi, ti invidio😂

E' UN C A P O L A V O R O !!! mi compiaccio con Lei per l'ingegnosita', l'immaginazione, la perizia, la pazienza, la tenacia. BRAVO !

11:20 classic example of how to make things complicated. BTW love your video.

Increíble me encanta ver lo bien que haces las cosas

Very interesting! Nice job!👍

Danny Tenaglia is an amazing DJ. Famous the world over.

Bellissimo lavoro

You are super innovator!!!!!

That's absolutely fantastic. Thank you for making this :-)

Un bello lavoro.Greetings from Toronto .

Oltre all'intelligenza e le capacità vedo delle ottime riprese, le prenderò come spunto per i miei tutorial ,complimenti Daniele

@DanieleTartaglia

2 жыл бұрын

Mi fa molto piacere, grazie 😜👍

Wow, that was really impressive!

superb, thank you for the inspiring video

I hope you will get 1 million soon

It will either last a week or the grandkids will marvel at paps's genius !

Non so se esistano campionati DIY su KZread ma hai già vinto la coppa del mondo. Un abbraccio.

Fun project if you have an abundance of specialized tools.

It's really cool! For continue need create a packaging-mashine for sorted coins and creatу an own bank. :)

It looks great, especially when considering it's build with very basic tools. An inspiration.

@knightwish1623

2 жыл бұрын

The machine looks and works great and the video was fun to watch, but I don't consider a laser cutting machine as a BASIC tool. For me basic tools are those which are not electrically powered

Nice job...cool project

100 Thumbs Up cool Project

Spettacolare, Daniele !!

Beh, sei un genio, che macchina fantastica, complimenti per l'ingegno

Ammazza! gran bel lavoro davvero, non è un lavoretto da fare in un pomeriggio questo!!

@DanieleTartaglia

2 жыл бұрын

no, neanche in qualche giorno 😣

Job well done!

Che mostro che sei. Non so che altro dire. Complimenti

solo una parola....GENIO!!!

This is awesome. When time is not an issue...

Just a few things. 1 I think a little bit faster time-laps would be a bit better. 2. A 3D print of this design would be sweet. 3. 3D modeling this design would be very interesting challenge. Good video over all.

Complimenti 👍👍

👌Super trabalho, como posso adquirir o seu projeto ? Precisava de fazer um assim para o meu comercio.

super complimenti.........

Awesome. I like it ❤👍🏻.

After all that amazing precision work the amount labels were just stuck on and don't line up! My OCD hurts 😱😱

@Mickeycuatropatas

2 жыл бұрын

He could have done it with the laser CNC that he cut those cool coin roller coasters with.

You are magic! Hello in Russia! Collosale job. I'm sorry for my English.

Hi, incredible video!! What's the white and black material that slides more than the wood?

Wow....sei un Genio !! 🤓

Top! Vedo che ormai voli sempre più alto... Mi chiedo dove arriverai 😁 complimenti

@DanieleTartaglia

2 жыл бұрын

Si, ma di questo passo finisco come Icaro 😂

@Rgb78

2 жыл бұрын

@@DanieleTartaglia sono sicuro che costruirai ali più robuste 😁

Awesome, u are trying to make everythinh like a masterpiece

SPETTACOLO!!!!!!!!!!!!!!!!!!

Questo è il nostro Daniele diResta, si resta fino alla fine a guardare i suoi video, grande Daniele

With all the tools and circuitry needed to make this project, it's a wonder you still have some coins to sort. In the time it took to design and construct this, you could have sorted 4,846,643,456 coins by hand.

Fantastico 👏👏👏👏👏👏😁😁😁👍👍👍👍

bestiale, pensa averlo progettato, realizzato e montato il video, se non è passione questa... mi sarei fermato già all'idea

@DanieleTartaglia

2 жыл бұрын

la passione, nel' essere umano è il motore di qualsiasi cosa 😂 comunque alla fine mi sono tolto una gambe e mi sono preso a calci nel sedere per aver ideato questa cosa...la volevo chiamare la machina delle madonne.