Excellent and very informative video, thank you, my point 1 works great now!

@RussellMarineProductsLLC

Ай бұрын

Thank you for the feedback!

Exactly overview, thank you!

I have point one units at the front and rear of my ranger, how would I set them up on my console and bow units?

Awesome video !!!

This is my Point-1 configuration, except my dual HDS console units are in global with the single HDS bow unit in local.

You are a legend my friend

If an xi3 trolling motor is on the bow should the gps be on the trolling motor gps instead of the internal unit gps

Spot on!👊🏻🇺🇸

Is there something I have to change on settings

My HDs doesn’t show heading under vessel , i do have the point one .

After time, when you have input waypoints from each unit and how do you differentiate where they came from as your looking at them? Networked together they should share waypoints. Example, you are idling around and enter a rock pile as waypoint on the console (the PRO 10” in video), but later your on the bow unit (HDS Live 12 in video) looking at that rock pile waypoint. How do you know which unit it was input on, which could change the distance you are away from it by a boat length basically.

@RussellMarineProductsLLC

8 ай бұрын

It doesn't matter where the waypoint was created. It is showing you a coordinate in relation to the graph you are viewing it on. That's where heading comes into play!

@glenndaugherity6187

8 ай бұрын

So Brett if I understand correctly this setup allows you to not have to run 2 Point 1s ?? 👍

@RussellMarineProductsLLC

8 ай бұрын

@@glenndaugherity6187 that is correct!

@glenndaugherity6187

8 ай бұрын

@RussellMarineProductsLLC Thanks Brett !!!

Nice

Will this setup stop my bow unit from spinning? Best other set up will be heading up? Thanks, I'm struggling with my bow unit spinning when fishing brush piles.

@lucricher8023

4 күн бұрын

yes

My bow graph doesn't have a transducer. I'm sharing from my console unit. Should the Bow unit still getting GPS from the unit or switch it to the Point one?

@lucricher8023

4 күн бұрын

the bow from it's unit

Is there a specific reason you are mounting the point one at the back of the boat?… I have a hole in the deck from factory mounted unit that I was wanting to cover with my point one.. would it be OK to mount the one at the front of the boat?

@ryanyeaman3596

3 ай бұрын

You want the Point-1 as close to your rear transducer as possible. If you have it on the front of your boat you will be marking structure etc from that location. So say your point-1 is 15 feet away from your transducer, your marks will be 15 feet off.