Image Transfer and Custom Paint on a Motorcycle Chopper Tank, water slide decal
Автокөліктер мен көлік құралдары
You can get all the paint and materials that I use on Amazon 👇 www.amazon.com/shop/influence...
LiME LiNE paint supplies 👇
limeline.bigcartel.com
Hey, whats up guys. In this video I will be custom painting a chopper tank with a few different methods. I use a torch to create a fire technique that i later apply a brandywine candy paint over the top then clearcoat to lock it down. Remember if you clearcoat you will need to sand and or scuff with 600 grit in order for the next layers of paint to stick. I also applied a (Clear) waterslide transfer paper and I ran through my ink jet printer to print the design. The white basecoat locks down the ink so its protected once submerged in water to release the backing from the water slide paper. Once applied to the part the ink is trapped between the white basecoat and the waterslide. Be sure all of the water and air bubbles are removed before moving onto clearcoat. When clearing a waterslide decal its important to remember to apply 3-4 really light coats to prevent the edges from floating. I applied silver leaf with sprayable sizing glue from LiME LiNE. The glue dries fast with only 2-5 min dry time before you can start leafing. I you plan on Spinning (engine turning) your leaf like I did here in this video be sure the leaf you are using spins. I have came across allot of other brands that just dont spin the same and have problems with burn throughs. I pinstriped the leaf edges with tape and an airbrush that way the paint lays thin and I know that the clearcoat will not have a reaction because Im using the same basecoat paints all the way through. Clearing over some pinstriping paint can cause separation or other problems if not careful.
Let me know if you have any Questions in the comments.
Thanks for Watching
Join this channel to get access to perks:
/ @timewarpcustompaint
Join this channel to get access to perks:
/ @timewarpcustompaint
Пікірлер: 1 200
Did you not apply the decal upside down? All the ones in your store you slide the decal off the paper with paper side down towards the surface. It looks like you applied it with the adhesive side facing upwards
@TimeWarpCustomPaint
2 жыл бұрын
Yes that’s correct the smooth basecoat on the waterslide decal clings to the sanded clearcoat on the tank much better adhesion then what little tack is provided on the top side of the decal. Doing it this way traps the ink between the basecoat and the waterslide decal both methods work this one is better
@ProwlersPit
2 жыл бұрын
@@TimeWarpCustomPaint the only thing I don't understand. If you paint the paper and then you slide the painted side to the metal. How does it attach to it? Because I assume once you paint the paper you got to wait for the paint to dry before you stick the water slide in water. So if the painted side of the paper is dry and only wet from the water. What makes it stick to the tank.
@jamesd1866
2 жыл бұрын
@@ProwlersPit just the water as the decal is so thin then after it's coated over the top it traps it there, the same as if you wet a piece of paper it would stick to a window
@Dude_Slick
Жыл бұрын
@@jamesd1866 Exactly. Or like if you set a wet coffee cup on a paper towel, and it leaves nice paper ring on the coffee table.
@HVACRTECH-83
Жыл бұрын
He did for some reason, I didn't think it would work the way he did it
Rather hear background noise or even you talking than that horrible music
Definetely not my style but... what a masterpiece.
As a Christian, I am really loving that a lot of the clients you're getting are getting a lot of Christian iconography on their tanks. Beautiful to see!
@TimeWarpCustomPaint
7 ай бұрын
Thank you for watching
@ddave7026
2 ай бұрын
Amen!
Wow!! I’m neither a bike guy or a painter and this is absolutely fantastic. I used to paint electric guitar bodies so I knew that end reveal was going to be popping!!! Fantastic.
Truly amazing. The talent this guy has and passion to produce quality work, his techniques are flawless. Really amazing to still see hand made stuff like this still being done.
@TimeWarpCustomPaint
2 жыл бұрын
Thank you !! I appreciate you watching
@MrArturo8485
Жыл бұрын
@@TimeWarpCustomPaint how for something like this but Azteca culture one.
Looks really really cool. I absolutely love the subject. It’s an incredible image. I’ve sprayed 1000’s of gallons of laquer commercialy but never had the opportunity to do something like this. Great job and thank you
@TimeWarpCustomPaint
2 жыл бұрын
That is awesome!
That`s the most "labor intensive" eleven minutes I`ve witnessed in a LONG time ! ARTISTS make Life worth living. Can Do !
It great to see people are still doing what my father did in the 70's!
Paint and supplies 👉www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
@Letsjustbehonesttoday
2 жыл бұрын
The Impala in the back is cool. What is that thing?
@washingtonluiz9543
2 жыл бұрын
Top
I can’t lie, I was skeptical when I saw “image transfer” on the title. I was thinking it should be hand drawn or airbrushed. After seeing this I was completely blown away!! Absolutely 100% beautiful!! Amazing! The work you put in, sanding between the multiple coats, the colors, the silver leaf, and the way you blended the image. New subscriber here.
It's amazing how all the components and detail become the final product. All those steps. You really have to be an artist. The finished job is spectacular.
Always watch these videos to the end. Novices like myself see the stages and think, that's going to look like crap, simply because I can't see the finished product in my mind. This isn't just a painter, this is an artist. Very well done!
@TimeWarpCustomPaint
2 жыл бұрын
I appreciate that thanks for watching
You are remarkably talented with that tape. Eyeballing a perfect line without a crinkle! Mark of a master
@TimeWarpCustomPaint
2 жыл бұрын
Thank you!!! I appreciate you watching
Honestly you’re a genius, the videos are amazing. They’re easy to follow because your explanations are incredible. And even if you’re not trying to paint, you can just binge watch the videos they’re so good.
@TimeWarpCustomPaint
2 жыл бұрын
I appreciate you
@Deerslyr81
2 жыл бұрын
Right!!
@chrislangdell117
2 жыл бұрын
@@TimeWarpCustomPaint . Need a more in depth video on the image transfer. Thats pretty sweet.
@SHREDTILLDEAD
2 жыл бұрын
@@chrislangdell117 first it goes on the hard drive then to KZread via internet. You're welcome.
@santhoshakumar6519
2 жыл бұрын
Power ɔɔpɔɔɔɔɔɔɔ
Pretty amazing for only 11 minutes and 35 seconds. Can’t imagine what you could do in a 40 hour work week. That’s some pretty amazing next level artwork.
Damn. You have patience. I’m a car painter and I couldn’t imagine putting so much time in one small area. 🙌
I saw this bike at a show in Phoenix a couple weeks ago! It was a lot of people's favorite! Definitely mine!
@TimeWarpCustomPaint
2 жыл бұрын
I appreciate that!!
The original art work is called “The Triumph of Christ” by artist Gustave Dore from the year 1868. Which is what makes it more awesome looking at it on a modern machine using modern technology!
@donlorinsharp
11 ай бұрын
Wow that's a really good point. Brings a whole different facet to the art. Poignant, not just amazing. What a name too. I love that piece so much. I'm going to look for it for my shop wall.
I can remember applying decals to model cars the same way. Was not aware it could be used on real life items. SWEET!!!
@TimeWarpCustomPaint
2 жыл бұрын
Right on thanks for watching
What a beautiful tank,anybody be proud to have one your tanks on their bike..
Awesome work. I have a suggestion for you. In the world of glass gilding you can get a mirror shine from silver/gold leaf, by smooth and high glossing the area you are going to gild. And then apply the silver/gold, not with glue. But with gelatin dissolved in hot water. Using that as your adhesive when drying, the gelatin will stretch out the silver/gold to an almost perfect mirror shine. Thought it could look cool on a tank as well. Be aware that it won't stick good as when using glue, so maybe a bunch of clear coat and a sanding could cover it nicely? You surely know that better than me. Any how, just a suggestion. Still awesome work!
I absolutely love this! I'm an artist myself just a God given talent that I've had since I was a kid. I've taken air brush classes several years ago but never really got into it since the classes were short and really not detailed like this. I admire your dedication because it takes a lot of time commitment and patience to be come an artist and to be really good at what you do! I've recently took up woodburning and absolutely love it! Whatever artwork you love just stay committed. Keep up the great work!
@TimeWarpCustomPaint
2 жыл бұрын
So true man thank you for the comment
@airbrushken5339
2 жыл бұрын
As an art teacher and a custom painter, the main issues with teaching people to use and airbrush, is the same as pin stripping or freehand lettering is muscle memory, which comes from repeat practice, I've never met an artist who even though was mentally a great artist who didn't do great work without hours and hours of prarice. Don't give up on the info you've gained, but it to practice and you'll get there.
@airbrushken5339
2 жыл бұрын
Sorry about the grammar and spelling ... just got home from a 12 hour road trip and at my age (73'), my old "Shovel Head" wears this old guy out...
@Dude_Slick
Жыл бұрын
If you want to airbrush, just to it. You don't need classes, as they can lock you in a box. You,re better off observing and gathering Tips and ideas from videos like this, and adapting them to work with your own art style.
@boomerhgt
Жыл бұрын
Correct me if I'm wrong I'm an airbrush artist myself but didn't I just watch someone applying a decal or sticker to a tank.
That finished tank is absolutely awesome,you done a fantastic job.👏👏👏👏👏👏👏
@TimeWarpCustomPaint
2 жыл бұрын
I appreciate you watching
I am rarely jealous of other people. But today I am jealous of 2 people. The person with the skills to create that piece of art work. And the person that now owns that piece of art work. FKN Amazing!!!
Hi, how do you make the Decals like the one you layed on the gas tank???
@TimeWarpCustomPaint
2 жыл бұрын
Clear waterside decal paper and a regular ink jet printer you can get the waterside paper here www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
@janeblogs324
2 жыл бұрын
Have you got any that are 2+ years old that have been left in the sun? I really want to know if the ink jet can withstand any sustained UV exposure
wow that's awesome 👍!! I use to paint cars and bikes. the money wasn't enough for me. I went into carpentry and after I really enjoyed the fresh air and sun . but I still did body work and painting. love your work!! I hit subscribe. today's painting is different from the early 80's. looking forward for more of your work!! ty for showing us what goes into your work.
One word "beautiful 🎉"......I wish my bike tank was done from him like this. ❤
Really beautiful work I would like to know where you got that image cuz I'm been trying to find it on Amazon I can't find that image it is wicked
@redbaron2448
2 жыл бұрын
He doesn't answer those kind of Questions 100% that's why I unsubscribe
@TimeWarpCustomPaint
2 жыл бұрын
Google search images Dante‘s Inferno
@TimeWarpCustomPaint
2 жыл бұрын
I try to help 🤷♂️
@jjhack3r
2 жыл бұрын
@@redbaron2448 but you still watch his videos...🤔
@redbaron2448
2 жыл бұрын
@@jjhack3r Nope, Unsubscribe him 👍
What brand tape do you use ???
@TimeWarpCustomPaint
2 жыл бұрын
LiME LiNE www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
@dccajc1
2 жыл бұрын
the best tape in the world lime line
@gsaexperience8578
2 жыл бұрын
It says it in the video like 20-30 times lol
@Zylinderheadfire
2 жыл бұрын
@@TimeWarpCustomPaint i only found a Website. But i dont found Beautiful Pictures to Transfer to my tank. For example the ship in your video
Made it look so easy, great job it turned out beautiful.
@TimeWarpCustomPaint
2 жыл бұрын
Thanks for watching
Ghost flames. Amazing! Good lookin' '63 Impala.
I love that image. I liked and subscribed for that in itself, but was also impressed by how gifted The LORD JESUS CHRIST made you in this. That taping and the artistic game plan for how to get the look is out of this world.
@Rayman-cd8bd
Жыл бұрын
Yeah I wish Jesus liked me as much as you
@georgecloss5644
Жыл бұрын
He died for you, I would say he loves you!
@jamesofallthings3684
Жыл бұрын
@@georgecloss5644 What a sociopath.
I used to custom paint in the early 80s we used house of color, candies lots and lots of masking and un masking and clearcoat.i don't think it paid near enough but was Satisfying when it was finished, like out the door
@TimeWarpCustomPaint
6 ай бұрын
Awesome thank you for sharing
I watch these videos and sometimes I have have to question whether my eye's are deceiving me. Pure genius 👏 🙌
@TimeWarpCustomPaint
Жыл бұрын
Thanks for watching
*Que trabalho incrível...é uma arte.*
Seu trabalho é magnífico mano! Parabéns...
A lot of skill and technique required. No wonder paint jobs are so expensive. One of a kind work of art. Turned out sharp
@TimeWarpCustomPaint
2 жыл бұрын
Thanks I appreciate the support
Manoooo, muito lindoooooo. Parabéns, vc é um profissional de ponta mesmo . Um trabalho desse deve ser mais caro que minha humilde moto kkkk mais uma verdadeira obra de arte , parabéns
I am blown away by how good that looks. You are fantastic.
@TimeWarpCustomPaint
2 жыл бұрын
Thank you thanks for watching
Always love seeing the talent that comes from my home state
@TimeWarpCustomPaint
Жыл бұрын
Right on man I appreciate you watching in
I'm glad this is possible. But it is amazing that people used to just hand paint all the pictures
Não há palavras esse trabalho ficou incrível você é o cara muito sussesso parabéns pelo trabalho a moto vira uma tela
Excelente combinación de técnicas . Todas en conjunto hacen un trabajo único. Saludos cordiales desde México a todos los fan de este canal
@TimeWarpCustomPaint
2 жыл бұрын
Thanks I appreciate the support
What is there left to say I'm speechless..absolutely AMAZING.....TOP NOTCH.....WOW!!!!!!!!!!!!!
Una auténtica obra de arte. Mis respetos. BRUTAL ✌😍👍
Never painted a thing since like 1986; got a milk can I wanna pant with a decal of my favorite hubby's photo on it. Watched this video and now i have ideas but am so lost on how to even begin. But thank you for giving me the want to do it.
@TimeWarpCustomPaint
2 жыл бұрын
No problem thanks for watching
Great skills. Great camera work. The choice of music is what keeps me from LIKING or SUBSCRIBING.
Daaaang!!👍👍👍🙏 That's so amazing!! The time and patience to complete that type of work. Takes a person with a gift.
@TimeWarpCustomPaint
2 жыл бұрын
Thank you I appreciate you watching in
God has blessed you with patience and skills, wonder job I enjoyed watching.
Love love love. Awesome bro. I’m started following you to learn and custom my bike tank. I do airbrush on custom leather. After watched your videos and materials list you posted, make easier. Thank you so much and keep up with your talents and skills. 👏👏👏👏👏
@TimeWarpCustomPaint
2 жыл бұрын
Right on!
You are very skilled. Very talented. Me? No way. No how could I EVER do that. Beautiful tank you created there. VERY MUCH a tank to be proud of.
@TimeWarpCustomPaint
2 жыл бұрын
Thank you I appreciate y
Dont'cha love it when the algorithms set you up right. Subscribed. Outstanding. Was a pleasure to watch. The video production/edit everything. Less talk, make it about the skill and the technique, perfect. Worth my time. This paint job is epic looking. I love it. Torch flames.... 🔥
@TimeWarpCustomPaint
6 ай бұрын
Much appreciated!
Wow ! That was beautiful ! ❤️👍😉
That was killer! I love that decal method you used on this tank.
@TimeWarpCustomPaint
2 жыл бұрын
Thank you I appreciate you watching
Love the red pin striping. It sets the rest of the job off. Great work!
@TimeWarpCustomPaint
Жыл бұрын
Thanks! most complain about it. I like it too
@mattozx6rr
Жыл бұрын
@@TimeWarpCustomPaint The only comment that matters is the owner of the bike it went on. If they loved it and padded your pocket a bit then your your work was spot on. Eff the rest.
Damn, now i have to paint my bike in the winter.....Looks absolutely amazing
@TimeWarpCustomPaint
7 ай бұрын
Thank you I appreciate you watching
I really love that picture on that tank that's beautiful man that's what I'm talking about
@TimeWarpCustomPaint
5 ай бұрын
Thanks for watching
That was a beautiful job. Lot of work . Befitting picture to have on a death machine, beings all the crazies on the road these days.
@TimeWarpCustomPaint
7 ай бұрын
Thank you I appreciate you watching
I had the opportunity to see this bike first hand at The One Bike show in Portland Oregon this year. Amazing work!
@TimeWarpCustomPaint
Жыл бұрын
thank you
Excellent great choice of colors.And the way the flames were accomplished.
@Hbmd3E
Жыл бұрын
just that they dont show. everything else perfect
@TimeWarpCustomPaint
Жыл бұрын
Thanks for watching
Awesome job! I love the details and time taken to turn it into priceless art!
@TimeWarpCustomPaint
Жыл бұрын
Thanks for watching
Beard tank you gave me some good ideas i could run with
Now THAT was AWESOME. Great job.
Unbelievable your are an art specialist, so great, I have never seen something like this, beautiful 👍
@TimeWarpCustomPaint
2 жыл бұрын
Thanks I appreciate the support
This guy is a genius 🧞♂️
OUTSTANDING!!!!!
@TimeWarpCustomPaint
2 жыл бұрын
Thank you I appreciate you watch in
I am super inspired to give some painting a try. I will start with adding something like fancy strips to my truck before doing a bike. Maybe a flat piece of steel 1st.
@TimeWarpCustomPaint
2 жыл бұрын
Good idea! Thanks for watching
Absolutely unbelievably awesome cool ideas. Really fun to watch your movies with great tips. You're awesome. Thanks, Chris 🇸🇪
@TimeWarpCustomPaint
2 жыл бұрын
Thanks t
@jokerjoker1132
2 жыл бұрын
I like it. Can I work?
One word. WOW 👌
@TimeWarpCustomPaint
2 жыл бұрын
Thank you I appreciate that thanks for watching
That transfer saved hours of airbrushing 👍
@TimeWarpCustomPaint
2 жыл бұрын
I personally couldn’t airbrush that much detail anyway. 🤷♂️
@ttxela
2 жыл бұрын
@@TimeWarpCustomPaint Would certainly be a challenge - and costly for a client!
Another Incredible paint job from Time Warp🤙 I can’t wait to try this
@TimeWarpCustomPaint
2 жыл бұрын
Thank you thanks for watching
Man, you really do make it look easy. I'm kinda itching to get the equipment and work along
@TimeWarpCustomPaint
2 жыл бұрын
Right on dude you should thanks for watching
trabajo de 10 !! brutal me encanta yo hice mis cosas, hace mucho pero nunca a este nivel gracias por el video!!
@TimeWarpCustomPaint
2 жыл бұрын
Thanks
Wooooow, master I am not worthy. Really a great custom paint job, that should be in a wall.
@TimeWarpCustomPaint
2 жыл бұрын
Thanks for watching!!
Respect is what you inspired because the way is the works you make
@TimeWarpCustomPaint
2 жыл бұрын
Thank you I appreciate you
Esse tipo de arte que admiro parabéns. Do Brasil
im already impressed by the taping
@TimeWarpCustomPaint
2 жыл бұрын
I appreciate that Thanks for watching
its always good to be a perfectionist bc everything turns out perfect, lol!!
@TimeWarpCustomPaint
Жыл бұрын
Fact 🙌
So many layers, damn. I would never guess it took so many coats
You da man Adam! Gonna give it a whirl...
Had my tins from my 2001 Heritage Springer painter here at Time Warp! Freaking incredible talented painter.
Dude: Your not a painter! Your an ARTIST. I just thought I was good. You are AMAZING!!!!!!!!
@TimeWarpCustomPaint
8 ай бұрын
Thank you so much 😀
Magnifique travail,bravo à vous
Unbelievable work. Skilled artist for sure
@TimeWarpCustomPaint
2 жыл бұрын
I appreciate that thanks for watching
A delight to watch a craftsman at work thak´s for sharing
@TimeWarpCustomPaint
6 ай бұрын
Thanks for watching
Just amazing and you make it look so easy !!
@TimeWarpCustomPaint
2 жыл бұрын
Thank you thanks for watching
That's incredible, great job!
@TimeWarpCustomPaint
2 жыл бұрын
Thank you very much!
That paint tank looks amazing
@TimeWarpCustomPaint
2 жыл бұрын
Thank you 🙏 I appreciate you watching
Wow. I wish I had that talent! Beautiful!
Wow! What a process and so beautiful. Pure art my friend! Outstanding job!
6:15 If you want an old rustic look along the edges when sizing, minimize the amount. just barely cover along edges, maybe just a portion of the edge. This causes the flake to break up randomly along the line. An old look. a little air to help it along maybe. Would have done well on this one. Beautiful work dude.
@TimeWarpCustomPaint
2 жыл бұрын
🙌🙌🙌👌👌
Wow! That’s art! Beautiful work man!
Beautiful work ! I love painting !
@TimeWarpCustomPaint
2 жыл бұрын
Me too thanks for watching
Maravilla de trabajo..., Felicitaciones.., saludos desde Montevideo Uruguay... 👏👏👏👏👏👏👏
Great idea...wow!
That is just AWESOOOOOOOME!!!
@TimeWarpCustomPaint
2 жыл бұрын
Thank you I appreciate you watching
God bless you and your hands ... beautiful work
@TimeWarpCustomPaint
2 жыл бұрын
Thanks for watching!!
I like the idea of using tape for pinstripes, You are a Truly Talented Individual Thanks for sharing.. Much RESPECT from Spokane Wa!
@TimeWarpCustomPaint
2 жыл бұрын
Trust me I get a lot of grief over it. Thanks for watching
Und genau das nennt man Kunst!
@TimeWarpCustomPaint
2 жыл бұрын
Thanks for watching