IKEA Ivar Cabinet Assembly-The right way!

Тәжірибелік нұсқаулар және стиль

Two of our cabinetmakers, Andrew and Cory walk you through their way of building an IKEA Ivar cabinet. The tools you need for this build is a #2 Phillips head screw driver and the included #4 allen key.
batemanlabs.com/

Пікірлер: 16

  • @ricnjaner1
    @ricnjaner16 ай бұрын

    Great job! Yes on the plates first. Thanks for the door adjustment tips! The only things I would add is that I always glue IKEA stuff together and the benefit of putting a finish on the wood to protect the wood. Makes it rock solid and age better. 👍

  • @LaylaDSmith
    @LaylaDSmith Жыл бұрын

    I'm so glad I came across this video! You did such an excellent job of explaining how to adjust those ridiculous (I'm not a carpenter) hinges! Subscribing just because of that!

  • @batemanlabs

    @batemanlabs

    Жыл бұрын

    Glad it was helpful!

  • @tyjeaneen3854
    @tyjeaneen3854 Жыл бұрын

    U should have an entire channel just explaining how to put ikea shit together!!!!

  • @martchen5175
    @martchen51752 жыл бұрын

    Thank you! Helped me! 😅

  • @nicolettew6479
    @nicolettew64798 ай бұрын

    MVP

  • @greg5383
    @greg53835 ай бұрын

    Great video! Our door is binding like yours, but much worse - we've loosened the back screw, but at this point it's pretty much maxed before it's back to the insertion hole. Are the hinges themselves likely to be different tensions or something? They seem to have different resistance when pushed individually by hand (with no door).

  • @batemanlabs

    @batemanlabs

    5 ай бұрын

    It’s possible you’ve got some defective hinges. Try and swap them around and see if the good hinges work on that door. Sounds like either some holes are drilled in the wrong spot or you’ve got a hardware malfunction. Hope this helps!

  • @prohhhvost
    @prohhhvost6 ай бұрын

    Thanks for video. However, how to hang/mountain this cabinet on the wall never was shown...... UNFORTUNATELY.... Now I need to buy,to open and see......and then probably to bring it back....:(

  • @thelanterns
    @thelanterns Жыл бұрын

    Mosquitos are not attracted to lights, when you see the dead bugs almost none of them are mosquitos.

  • @thaliacrafts407

    @thaliacrafts407

    Жыл бұрын

    True, they are actually attracted to the carbon dioxide in your breath.

  • @hollycumming
    @hollycumming9 ай бұрын

    My doors were all good, and then I put my shelf in the top available hole position (and it lines up with the 'rails' on the back of the doors. Now they won't close properly. Can you put a shelf in this position? Or will it never be possible to adjust the doors with a shelf at the top there?

  • @hollycumming

    @hollycumming

    9 ай бұрын

    And yes I know it makes a super tiny shelf area at the top but trust me it makes sense to have it there for my purposes!

  • @batemanlabs

    @batemanlabs

    9 ай бұрын

    If the top rail of the door is just screwed, you could move it up or down out of the way of the shelf. However if the rail will not move after the screws are out then it’s glued and will not move.

  • @strongjrs

    @strongjrs

    8 ай бұрын

    Were you able to unscrew those "rails"?

  • @Consrignrant
    @Consrignrant5 ай бұрын

    Stay away from Ivar.

Келесі