Great insight!, thank you. The Ikea table' s leg is actually the missing ingredient to my DIY very draft project for a platform to be fitted in my car - i. e. Opel Zafira Life, quite similar to your one. I hope I will be able to share some images from the finished product soon. Take care and enjoy your time on the road! 👍👋👋
@jonathanbirley6022 Жыл бұрын
I had to buy a new table top twice in the past two years as I wore them out whilst working from home during the covid lockdown. The adils legs are quite durable and just I easily swap them over to the new table top. This is a great system teamed up with the Alex drawers as you can just buy a bigger desk top if you need more space over time e.g. need a larger computer monitor. The ikea signum cable tidy is pretty good but costs almost the same price as the desk top in the U.K.
@Zoidd_Bergg
Жыл бұрын
you should invest in Karlby, it is a kitchen worktop from Ikea, more expensive than the average table top however the Karlby is much more durable
@jehu88223 жыл бұрын
Can I fit them under Lack side table top?
@Hectanidos3 жыл бұрын
One of the adil leg is not fitting in properly with the table, think the screw that go inside the table is faulty, how do i fix it??
@tracytrujillo53682 жыл бұрын
How to add castors to legs???
@davidcapatina87023 жыл бұрын
Can you fill it with a screwble
@delpicsla652 жыл бұрын
I have the legs but the screw came off. Is there a way to fix it
@p3eqo5443 жыл бұрын
Would these go in the ikea thyge desk
@dsinghr3 жыл бұрын
Screws are not going in properly. They seems oversized compared to tiny holes in the back of table
@harris5664
3 жыл бұрын
use a drill, it think that was intended
@sairohithreddyvannavada1739
3 жыл бұрын
@@harris5664 ya i too think its intentionally made tight so that they'll be stiff enough.
@55rimshot2 жыл бұрын
Is it possible to shorten the legs by about 6 inches by metal cutting and removing the bottom adjusters and refitting them to the now shorter top section?
@iiSup3rior
Жыл бұрын
Home depot has adjustable legs. 4 for like 35
@harris56643 жыл бұрын
how sturdy are the legs?
@dennykurniawan41313 жыл бұрын
I have adils.. but, I cant open the grey plate..
@MaxRicho343 жыл бұрын
Do the legs come with the desk
@lamcherrylam Жыл бұрын
How did you make the screws of the legs go into the table? I have tried using a normal screwdriver but it did not work. Did you use an electric screwdriver?
@bryancheah8177
Жыл бұрын
I tried using a normal screwdriver, it’s very very difficult. Only managed to install one leg. I’m going to borrow an electric screwdriver now
@minhanhtran2786
Жыл бұрын
@@bryancheah8177 did it work for you? I used the electric screwdriver but the screws would not go all the way in :((
@XLite.7 ай бұрын
Can i put a TV in this table, 50 inch?
@XxViPeRxGaMeRxX3 жыл бұрын
Is it easy to take apart? Will it damage the screw holes if I do take it apart????
@cx2326
3 жыл бұрын
If u take it our carefully it wont
@jonathanbirley6022
Жыл бұрын
They are quite durable. I've taken mine apart loads of times and re-used them on replacement desktops.
@Gabriel-fm3ji3 жыл бұрын
I have 2 questions. First is do the holes on the Linmon desktop come in already and do olov legs work on the linmon?
@Ul-Haq
3 жыл бұрын
yes, holes are already there when you purchase it. don't know about the other question sorry
@cx2326
3 жыл бұрын
yes
@ragingdestiny57063 жыл бұрын
Dimensions?
@shownomercy35913 жыл бұрын
Thank u
@harishkeerthivasan17073 жыл бұрын
Do you feel the table shaking slightly while writing?
@cx2326
3 жыл бұрын
yup
@Emilyghe4 жыл бұрын
Can screw the screws in without a screwdriver? If not, what type of screw driver did you use
@worldslayer3864
3 жыл бұрын
I'm about to build mine it's in my room now I'll be sure to get back to you enless you already know the answer now
@shawnthomas2035
3 жыл бұрын
Tell
@Instinct0425
3 жыл бұрын
@@worldslayer3864 ?
@Katatonya
3 жыл бұрын
I think u can with a perfect screwdriver fit, just a bit off and you'll break your hands
@nikhillele1053 Жыл бұрын
Hi! I wanted to know what the dimension between the legs is. I want to fit a 32 inch wide cabinet beneath this desk. Is that possible? Makes sense for me to buy this only if I can fit the cabinet under it. Thanks in advance.
@iiSup3rior
Жыл бұрын
27½ inches in height. They're pretty standard desk height legs
@gameplaysnl80902 жыл бұрын
I cant get it at the sane heigt
@Senseiivfx3 жыл бұрын
Did u have to buy the legs separately or did they come with the table top together??
@kacetechreview4978
3 жыл бұрын
Need to buy the legs separately. There are many variety of legs and table tops you can choose from.
@Kizzyrackss
Жыл бұрын
@@kacetechreview4978 do you have to buy individual legs or do they all come in one pack
@zach17183 жыл бұрын
Do the godvin legs work with this tabletop?
@mounssifkoumila3962
3 жыл бұрын
Yes
@daunted42233 жыл бұрын
Can i use legs other than the adils legs?
@Adrian.morales.aps1
3 жыл бұрын
Yea
@KareemAldulaimi213 жыл бұрын
Do the nails come with the supporting legs
@kacetechreview4978
3 жыл бұрын
yes, nails are supplied with the legs
@jonathanbirley6022
Жыл бұрын
Each leg comes with 5 screws.
@jonathanlandrau16924 жыл бұрын
You now diameter screw raising
@misconduct68452 жыл бұрын
Is it possible to assemble it with a screw driver?
@akhileshsagar
2 жыл бұрын
if you’re bodybuilder then it’s possible. i bought 6 and it takes 2.5 hours to assemble. cons: screw tighten process is fcuk your hand. if possible, use rubber gloves, it helps a lot.
@haesue9393
2 жыл бұрын
@@akhileshsagar if not using screw driver, wht should be used instead?
@qase80703 жыл бұрын
Just got one, for 10 dollars oh my it's worth it.
@BobTheBuilderIsOnWish
3 жыл бұрын
Question do you just get 4 table legs for 5 dollars or do you have to spend 20 dollars for 4 table legs?
@shadowyshadow1941
3 жыл бұрын
@@BobTheBuilderIsOnWish you have to spend $20
@BobTheBuilderIsOnWish
3 жыл бұрын
@@shadowyshadow1941 ok
@adlxyfn62433 жыл бұрын
Could I fit I one monitor setup on this
@zesty9387
3 жыл бұрын
clyst adlxy. Yes
@Nothingatallllll
3 жыл бұрын
No, you have to get 5 desks for 1 monitor
@catman1353
3 жыл бұрын
@@Nothingatallllll bro ur name broke my scream lmao... I need 5 monitors to display it
@justqtip4 жыл бұрын
What are the table top dimensions?
@Hi-gw5sz
3 жыл бұрын
Stan Andre u can get. Different sizes lowest is 100x60cm
@caddzzz3 жыл бұрын
Do the screw on things come with it
@bongos2745
3 жыл бұрын
Yes
@lihanloh85343 жыл бұрын
how heavy do these legs support?
@bryansuarez5057
3 жыл бұрын
I think it’s like 100 or 110 pounds
@probmih1245
3 жыл бұрын
50kg
@bach7303 жыл бұрын
Impossible to find the legs now.
@alexandregratton450
3 жыл бұрын
I got 5 yesterday after 1 month of waiting..
@kirbs95673 жыл бұрын
Are the adils legs too low?
@shadowyshadow1941
3 жыл бұрын
No perfect height
@nolanpetrone88024 жыл бұрын
Does the table come with the holes already for the legs
@AlexLopez-xm4yr
4 жыл бұрын
Yes
@xeto59884 жыл бұрын
Do you have to buy 4 separately or buy one and it comes with 4
@Oscar-jc8jp
4 жыл бұрын
Separate.
@loganmillermusic8161
3 жыл бұрын
No you can buy a linnimon desk that comes with legs bug this guy built one with different ones @Xeto
@gingginggango
3 жыл бұрын
I was thinking of the same
@jonathanbirley6022
Жыл бұрын
You buy the legs individually.
@nutiyy17213 жыл бұрын
Do those grey things to put the screws in come with the legs?
@yumi-jx5nz
3 жыл бұрын
yes
@jonathanbirley6022
Жыл бұрын
Yes they come with the legs and with five screws.
@choppy_2333 жыл бұрын
Do the legs come in a pack of 4
@shayliedavidson9067
3 жыл бұрын
No u have to buy 4 they are separate
@mythclan75243 жыл бұрын
Where can you find the adils legs for that price
@erkka3684
3 жыл бұрын
Ikea has sales myguy, my local Ikea is selling them 2,50 a piece atm
@heymsparker1115
3 жыл бұрын
I was just in my local Ikea. They are $4 but sold out
@christophersayyad40373 жыл бұрын
Do you get all 4 legs or do you have to buy each leg individually
@followeralb
3 жыл бұрын
Individually
@cx2326
3 жыл бұрын
If u not wanna deliver u have to buy the 4 Differently
@Currosion3 жыл бұрын
Can I use these legs on a different brand desk/table top?
@sreekarvantrapati7065
3 жыл бұрын
Yes, but you have to precisely make screw holes and attach the connector plates that come with the legs it's a tedious process. Better get a white Ikea table-top and attach vinyl to it.
@cx2326
3 жыл бұрын
yes u can
@abbottvisr12343 жыл бұрын
Do they come with screws?
@shadowyshadow1941
3 жыл бұрын
Yes
@shadowyshadow1941
3 жыл бұрын
And a screw driver
@moistbtw71383 жыл бұрын
dumb question but can u use a screw driver lol
@jonkahrs4749
2 жыл бұрын
It's not a dumb question. I found it virtually impossible to do it manually. I needed an electric screwdriver and I am not am not a weak person
@mikelai74833 жыл бұрын
Do I need use screwdriver ?
@Idevendrasen
3 жыл бұрын
Na, you need a power drill
@denny3387
3 жыл бұрын
@@Idevendrasen no u don’t, u can use a screwdriver it will just a take awhile
@AirbrushDGart3 жыл бұрын
are the lags stable? what about when you accidentally hit them with your legs.?
@bambam9679
3 жыл бұрын
well get like 4 of them
@misconstrued76714 жыл бұрын
do screws come with the legs?
@Raffa-wx6kl
4 жыл бұрын
Yes
@denzelb13333 жыл бұрын
how long can the legs be extended
@reece7324
3 жыл бұрын
Adil legs can't extend but the Olov legs also on Ikea can
@SwagInspector3 жыл бұрын
what screwdriver do you need?
@iliasszn8558
3 жыл бұрын
@@humancone_ heavy
@jonkahrs4749
2 жыл бұрын
Very good question. I found a typical screwdriver did not work.. I had to go out and buy an electric screwdriver that did not make me happy. They should have designed it with a hex screw
@sussysushi51504 жыл бұрын
Is it stable?
@excoupe2.44 жыл бұрын
do the legs fit with 2 alex drawers on both sides with only one leg in the middle?
@lousassle342
4 жыл бұрын
it can fit wihtout any legs, the alex drawers are strong enough to hold a tabletop
@andreea991503 жыл бұрын
does it come with a little screwdriver?
@shadowyshadow1941
3 жыл бұрын
Yes
@javib8443 жыл бұрын
Hi! Is the surface completely smooth or is the texture a little rough? Thanks in advance!
@sanashys
3 жыл бұрын
completely smooth!!
@sreekarvantrapati7065
3 жыл бұрын
smooth but cold to touch
@jonathanbirley6022
Жыл бұрын
Smooth despite having the woodgrain finish look.
@sajidjjambagi2 жыл бұрын
No proper tabletop screw fixing demo 🙃 need improved instructions
@guccifish3163 жыл бұрын
this video was very hard o watch. i dont recommend you do this for a living what so ever
Пікірлер: 130
Great insight!, thank you. The Ikea table' s leg is actually the missing ingredient to my DIY very draft project for a platform to be fitted in my car - i. e. Opel Zafira Life, quite similar to your one. I hope I will be able to share some images from the finished product soon. Take care and enjoy your time on the road! 👍👋👋
I had to buy a new table top twice in the past two years as I wore them out whilst working from home during the covid lockdown. The adils legs are quite durable and just I easily swap them over to the new table top. This is a great system teamed up with the Alex drawers as you can just buy a bigger desk top if you need more space over time e.g. need a larger computer monitor. The ikea signum cable tidy is pretty good but costs almost the same price as the desk top in the U.K.
@Zoidd_Bergg
Жыл бұрын
you should invest in Karlby, it is a kitchen worktop from Ikea, more expensive than the average table top however the Karlby is much more durable
Can I fit them under Lack side table top?
One of the adil leg is not fitting in properly with the table, think the screw that go inside the table is faulty, how do i fix it??
How to add castors to legs???
Can you fill it with a screwble
I have the legs but the screw came off. Is there a way to fix it
Would these go in the ikea thyge desk
Screws are not going in properly. They seems oversized compared to tiny holes in the back of table
@harris5664
3 жыл бұрын
use a drill, it think that was intended
@sairohithreddyvannavada1739
3 жыл бұрын
@@harris5664 ya i too think its intentionally made tight so that they'll be stiff enough.
Is it possible to shorten the legs by about 6 inches by metal cutting and removing the bottom adjusters and refitting them to the now shorter top section?
@iiSup3rior
Жыл бұрын
Home depot has adjustable legs. 4 for like 35
how sturdy are the legs?
I have adils.. but, I cant open the grey plate..
Do the legs come with the desk
How did you make the screws of the legs go into the table? I have tried using a normal screwdriver but it did not work. Did you use an electric screwdriver?
@bryancheah8177
Жыл бұрын
I tried using a normal screwdriver, it’s very very difficult. Only managed to install one leg. I’m going to borrow an electric screwdriver now
@minhanhtran2786
Жыл бұрын
@@bryancheah8177 did it work for you? I used the electric screwdriver but the screws would not go all the way in :((
Can i put a TV in this table, 50 inch?
Is it easy to take apart? Will it damage the screw holes if I do take it apart????
@cx2326
3 жыл бұрын
If u take it our carefully it wont
@jonathanbirley6022
Жыл бұрын
They are quite durable. I've taken mine apart loads of times and re-used them on replacement desktops.
I have 2 questions. First is do the holes on the Linmon desktop come in already and do olov legs work on the linmon?
@Ul-Haq
3 жыл бұрын
yes, holes are already there when you purchase it. don't know about the other question sorry
@cx2326
3 жыл бұрын
yes
Dimensions?
Thank u
Do you feel the table shaking slightly while writing?
@cx2326
3 жыл бұрын
yup
Can screw the screws in without a screwdriver? If not, what type of screw driver did you use
@worldslayer3864
3 жыл бұрын
I'm about to build mine it's in my room now I'll be sure to get back to you enless you already know the answer now
@shawnthomas2035
3 жыл бұрын
Tell
@Instinct0425
3 жыл бұрын
@@worldslayer3864 ?
@Katatonya
3 жыл бұрын
I think u can with a perfect screwdriver fit, just a bit off and you'll break your hands
Hi! I wanted to know what the dimension between the legs is. I want to fit a 32 inch wide cabinet beneath this desk. Is that possible? Makes sense for me to buy this only if I can fit the cabinet under it. Thanks in advance.
@iiSup3rior
Жыл бұрын
27½ inches in height. They're pretty standard desk height legs
I cant get it at the sane heigt
Did u have to buy the legs separately or did they come with the table top together??
@kacetechreview4978
3 жыл бұрын
Need to buy the legs separately. There are many variety of legs and table tops you can choose from.
@Kizzyrackss
Жыл бұрын
@@kacetechreview4978 do you have to buy individual legs or do they all come in one pack
Do the godvin legs work with this tabletop?
@mounssifkoumila3962
3 жыл бұрын
Yes
Can i use legs other than the adils legs?
@Adrian.morales.aps1
3 жыл бұрын
Yea
Do the nails come with the supporting legs
@kacetechreview4978
3 жыл бұрын
yes, nails are supplied with the legs
@jonathanbirley6022
Жыл бұрын
Each leg comes with 5 screws.
You now diameter screw raising
Is it possible to assemble it with a screw driver?
@akhileshsagar
2 жыл бұрын
if you’re bodybuilder then it’s possible. i bought 6 and it takes 2.5 hours to assemble. cons: screw tighten process is fcuk your hand. if possible, use rubber gloves, it helps a lot.
@haesue9393
2 жыл бұрын
@@akhileshsagar if not using screw driver, wht should be used instead?
Just got one, for 10 dollars oh my it's worth it.
@BobTheBuilderIsOnWish
3 жыл бұрын
Question do you just get 4 table legs for 5 dollars or do you have to spend 20 dollars for 4 table legs?
@shadowyshadow1941
3 жыл бұрын
@@BobTheBuilderIsOnWish you have to spend $20
@BobTheBuilderIsOnWish
3 жыл бұрын
@@shadowyshadow1941 ok
Could I fit I one monitor setup on this
@zesty9387
3 жыл бұрын
clyst adlxy. Yes
@Nothingatallllll
3 жыл бұрын
No, you have to get 5 desks for 1 monitor
@catman1353
3 жыл бұрын
@@Nothingatallllll bro ur name broke my scream lmao... I need 5 monitors to display it
What are the table top dimensions?
@Hi-gw5sz
3 жыл бұрын
Stan Andre u can get. Different sizes lowest is 100x60cm
Do the screw on things come with it
@bongos2745
3 жыл бұрын
Yes
how heavy do these legs support?
@bryansuarez5057
3 жыл бұрын
I think it’s like 100 or 110 pounds
@probmih1245
3 жыл бұрын
50kg
Impossible to find the legs now.
@alexandregratton450
3 жыл бұрын
I got 5 yesterday after 1 month of waiting..
Are the adils legs too low?
@shadowyshadow1941
3 жыл бұрын
No perfect height
Does the table come with the holes already for the legs
@AlexLopez-xm4yr
4 жыл бұрын
Yes
Do you have to buy 4 separately or buy one and it comes with 4
@Oscar-jc8jp
4 жыл бұрын
Separate.
@loganmillermusic8161
3 жыл бұрын
No you can buy a linnimon desk that comes with legs bug this guy built one with different ones @Xeto
@gingginggango
3 жыл бұрын
I was thinking of the same
@jonathanbirley6022
Жыл бұрын
You buy the legs individually.
Do those grey things to put the screws in come with the legs?
@yumi-jx5nz
3 жыл бұрын
yes
@jonathanbirley6022
Жыл бұрын
Yes they come with the legs and with five screws.
Do the legs come in a pack of 4
@shayliedavidson9067
3 жыл бұрын
No u have to buy 4 they are separate
Where can you find the adils legs for that price
@erkka3684
3 жыл бұрын
Ikea has sales myguy, my local Ikea is selling them 2,50 a piece atm
@heymsparker1115
3 жыл бұрын
I was just in my local Ikea. They are $4 but sold out
Do you get all 4 legs or do you have to buy each leg individually
@followeralb
3 жыл бұрын
Individually
@cx2326
3 жыл бұрын
If u not wanna deliver u have to buy the 4 Differently
Can I use these legs on a different brand desk/table top?
@sreekarvantrapati7065
3 жыл бұрын
Yes, but you have to precisely make screw holes and attach the connector plates that come with the legs it's a tedious process. Better get a white Ikea table-top and attach vinyl to it.
@cx2326
3 жыл бұрын
yes u can
Do they come with screws?
@shadowyshadow1941
3 жыл бұрын
Yes
@shadowyshadow1941
3 жыл бұрын
And a screw driver
dumb question but can u use a screw driver lol
@jonkahrs4749
2 жыл бұрын
It's not a dumb question. I found it virtually impossible to do it manually. I needed an electric screwdriver and I am not am not a weak person
Do I need use screwdriver ?
@Idevendrasen
3 жыл бұрын
Na, you need a power drill
@denny3387
3 жыл бұрын
@@Idevendrasen no u don’t, u can use a screwdriver it will just a take awhile
are the lags stable? what about when you accidentally hit them with your legs.?
@bambam9679
3 жыл бұрын
well get like 4 of them
do screws come with the legs?
@Raffa-wx6kl
4 жыл бұрын
Yes
how long can the legs be extended
@reece7324
3 жыл бұрын
Adil legs can't extend but the Olov legs also on Ikea can
what screwdriver do you need?
@iliasszn8558
3 жыл бұрын
@@humancone_ heavy
@jonkahrs4749
2 жыл бұрын
Very good question. I found a typical screwdriver did not work.. I had to go out and buy an electric screwdriver that did not make me happy. They should have designed it with a hex screw
Is it stable?
do the legs fit with 2 alex drawers on both sides with only one leg in the middle?
@lousassle342
4 жыл бұрын
it can fit wihtout any legs, the alex drawers are strong enough to hold a tabletop
does it come with a little screwdriver?
@shadowyshadow1941
3 жыл бұрын
Yes
Hi! Is the surface completely smooth or is the texture a little rough? Thanks in advance!
@sanashys
3 жыл бұрын
completely smooth!!
@sreekarvantrapati7065
3 жыл бұрын
smooth but cold to touch
@jonathanbirley6022
Жыл бұрын
Smooth despite having the woodgrain finish look.
No proper tabletop screw fixing demo 🙃 need improved instructions
this video was very hard o watch. i dont recommend you do this for a living what so ever
@bradleytucker4309
3 жыл бұрын
why?