Thanx for the video. The section at 6.42 - 7.23 about how to change noozles was brilliant & informative for me, because I then realised, that I have been doing it wrong for a year..😂

@rev-you1975

7 ай бұрын

Hello. Absolute pleasure. I am guilty of exactly the same thing. I’d had mine for quite some time before I realised it was the pick up tips. Thanks for watching. All the best.

Great vid. Maybe with the dry foam tip you could use slightly use foam and still get a really nice coverage. Have you played around with the % ratio's at all? Did you find 20% the best?

@rev-you1975

Ай бұрын

Hello. Thanks for watching and taking the time to comment. I’ll need to review the video to refresh my memory. I have indeed done tests in the past dropping the dilution ratio down to ridiculously weak. My findings were that the cleaning power was very very similar. Only real difference was foam thickness and subsequently cling/dwell time. So if the car is filthy and really needs thick foam, then up the ratio. If the car is only moderately dirty/doing a weekly maintenance wash, you can easily drop to a much weaker mixture. Saves money. Product goes further. Does almost the same job. Just thinner foam.

I think I’m going to get one of these for cleaning wheels. Thanks for demonstrating it’s capabilities!

@rev-you1975

8 ай бұрын

Hello. Thanks for watching and thanks for taking the time to comment. For the money. They are very good. I’d buy another in a heartbeat. I use the foamer or multi sprayer for every wash. I’ve seen some other higher end versions that pan the organiser recommends. So may be worth checking them out too just for your reference. My foamer must be well over 1500 pumps now. Still going strong.

@rev-you1975

8 ай бұрын

Marolex. They are the ones I saw recently on Pan’s channel. Worth a look. I haven’t checked prices yet. But they look good.

@dirkdingle7926

8 ай бұрын

That’s what I bought mine for wheels only,get some decent wheel shampoo few squirts in warm water pump 30 times away ya gan,I can get decent foam with it too,I also do the archers wheel get all 4 alloys done with one fill,

Good to see the tips in action. I did try the others, but medium is the Goldilocks as it works well enough for most products. And perfect with Just Wheels. And I'm glad we see your first experience with a new test. As honest as it gets. Cheers!

@rev-you1975

8 ай бұрын

Always my first try my friend. No dry runs here. It is what it is.

@rev-you1975

8 ай бұрын

Thank you for watching and taking the time to comment as always. All the best.

That was a useful video as I was a little sceptical about whether pump sprayers could be used for foaming, but you've changed my mind as they seem do the job quite well. I think the thick foam would be ideal for wheels, sills and underbody as it would drag the dirt off better than a wet foam. I've already got a Marolex 2000, which I use for doing a rinseless wash, but now I'll have to get the IK FOAM PRO 2 to add to my arsenal.

@rev-you1975

8 ай бұрын

Thank you. Really appreciate it. I genuinely wouldn’t be without one now. I initially got one as a little treat having used the bigger ik product a few years ago. As I say. I genuinely wouldn’t be without one now. In that. If it broke. I’d buy another immediately. I have used it loads. Every single weekend in all honesty. Thanks for watching and thanks for taking the time to comment. Oh. And yes. Great for wheels and underneath. I’ll be doing that again this weekend to protect scooby from the uk winter. Plus a dash of lanoguard as per standard practice. There’ll be an update on that process incoming Monday. All the best.

@johnough4893

8 ай бұрын

@@rev-you1975 I'll look out for that as I'm interested in a lanoguard protection for my car. So seeing a video on it will be again be useful.

Dude, I'm Turkish and I don't know the language. Could you please write me which shampoo you used and how much water and how much shampoo you used. Thank you.

@rev-you1975

2 ай бұрын

Hello. Thanks for watching and taking the time to comment. From memory (it’s a while since I shot this video), these ratios worked well Autofoam 20% strength - 500ml water 100ml product 10% strength - 500ml water 50ml product 5% strength - 500ml water 25ml product 2% strength - 500ml water 10ml product Thanks again.