If You're a DEVELOPER You NEED to Know These Dev Hacks... (Roblox)
Check out my asset store! (Free Stuff to!): shoprobuilder.com/
For weekly Asset Packs check out our Patreon!: www.patreon.com/RoBuilder?fan...
RoBuilder Discord
- / discord
RoBuilder Fan Shirt
- www.roblox.com/catalog/642374...
- Thanks for watching! Discord -- / discord
Пікірлер: 1 000
For the glitches that players can do to exit the map, there's no need for cylinders, just make the barrier thicker
@byemax.
2 жыл бұрын
Yeah dance clipping only allows you to go through 0.8 or less studs, and corner clipping is gone because roblox patched it
@cloudy9873
2 жыл бұрын
@@byemax. yeah well u can laugh clip through like 1.2 studs
@nuclearnot
2 жыл бұрын
@@cloudy9873 increase it to 1.3 studs then :troll:
@chaoshawk7850
2 жыл бұрын
@@nuclearnot increase to 1.21 :troll:
@nuclearnot
2 жыл бұрын
@@chaoshawk7850 im bleeding
I’ve been a developer for years and I knew all these personally but it’s really nice to see someone is showing possibly new or just “not as experienced” developers.
@nub9583
2 жыл бұрын
ARE YOU CALLING ME A TRASH BUILDER?!??!
@14GZ
2 жыл бұрын
@@nub9583 yes
@ManicDrone
Жыл бұрын
@@nub9583 no
@PikminEater
Жыл бұрын
@@nub9583 maybe
@ObvEfojux
Жыл бұрын
@@nub9583 ehh maybe 😏
I love how he noticed he made a mistake at 5:43 and immediately cut to the solution, that made me laugh a little
@BatGamesYT
2 жыл бұрын
Same
@ThatOneProFloppaTheBest
2 жыл бұрын
Fun fact: in the title He said "hacks" right? Means Roblox needs to ban he
@nooby520
2 жыл бұрын
@@ThatOneProFloppaTheBest unfunny
@ManicDrone
Жыл бұрын
@@nooby520 true
@randompro1755
Жыл бұрын
@@nooby520 why are u being rude he is joking.
Well actually, players could still glitch through those invisible walls as long as they're 1-2 studs thick. Basically, there's many glitches in Roblox, and if you do /e dance2 (then doing the glitch along with that dance command), you're able to get past the wall. Now, I would explain this, but it can be pretty complicated to say how it works, so I'll just say that. *I suggest that everyone makes their invisible barriers 5 studs thick to avoid this problem.*
@user-xc2hy1ur2h
2 жыл бұрын
Thx! Something else?
@Rocto
2 жыл бұрын
It's impossible to glitch through a wall more than 1 stud thick without a gear that you can equip and unequip Also these rules only apply to r6
@hamster3664
2 жыл бұрын
@@Rocto you can glitch through 1 stud walls with the sleep animation (i think thats what its called) in r15 too. always better to go 5 studs thick just in case
@rustunsafe
2 жыл бұрын
@@Rocto you can glitch through 10 thick walls in r6
@Rocto
2 жыл бұрын
@@rustunsafe what the hell are you talking about
TL;DW + Timestamps (all done in mobile) 1:13 put Cylinders on corners to stop players for glitching out (just make the walls a few studs thicker 2:19 put an invisible truss on ladders to make it more climbable 3:46 if you have a cylinder with the textures on the wrong way, (bricks facing from top to bottom) then group it with another part with the same texture to make the cylinder have the correct texture 4:35 if you’re spacing objects then select 2 parts, duplicate both of them and make the first part line up with the last part and then deete the part 6:03 add an invisible wedge on stairs so you won’t get stuck while climbing up 7:54 if you have a light source that is high in the air to the point where it doesn’t reach the ground just add another light effect on the ground (just add more range in the light property in your light source)
@gpfzs
2 жыл бұрын
wow 0 likes and 0 comments? Thank you so much!!
@wappappaa7764
2 жыл бұрын
This should be pinned but okay
@callmehakin5712
2 жыл бұрын
Ty!
@NikTehWafel
2 жыл бұрын
So what it’s on mobile?
@bingolinging
2 жыл бұрын
@@NikTehWafel what? Roblox studio is pc compatible only
Even though I'm a scripter it's really helpful for me
@version9647
2 жыл бұрын
Same, I do Java Python and the basic lua what about you
@honeycombs633
2 жыл бұрын
Yeaa is guess
@jay.7923
2 жыл бұрын
Same
@Pop4484
2 жыл бұрын
@@version9647 roblox lua and gLua
@SoulSquidz
2 жыл бұрын
Honestly I really wanna build my own roblox game but idk allot about scripting can y’all help me out with the basics ?
honestly i think using invisible barriers are a pretty outdated idea, if you have the time i recommend using foliage or buildings and overall objects to stop the player from leaving edit: i think i should fix my wording here, its not outdated, its just boring
@loftt_01
2 жыл бұрын
I wouldn't say they're "outdated". It depends on the kind of game you're making.
@CorruptedVR
2 жыл бұрын
@@loftt_01 yeah if your in a foggy city and want to restrain the player you don’t want to put them in a pit of garbage
@bukachell
2 жыл бұрын
well in all cases you still use an invisible wall and the objects marking the edge are usually just to cover up the fact it's an invisible wall
@portalj123
2 жыл бұрын
@@bukachell i just prefer using only objects as it can be fun with the story, of course if its a zombie apocalypse perhaps you can put maybe a wall. for example the government tried to contain it, or you can end it off with water for a coastal map or island
@luunars
2 жыл бұрын
@@portalj123if you don’t have a wall, visible or invisible, people can just escape the play area
As someone who was a creator and a freelancer for 8 years, It's nice to see these being brought up. I wish more newer developers knew about the lighting trick, because lighting is key for any game!
@fadingrainbow8882
8 ай бұрын
Luckily i started developing late enough that I was actually able to learn using the roblox creator documentation. It's really useful and also explains things like lighting, ambience, etc.
7:33 to go around the attachment idea, you can change the range of the spotlight with the properties, and lower the light level to make it look more realistic
As a person who literally knows nothing about building and making games, this was very helpful.
8:00 you know you can adjust the range of the spotlight in the properties It's the same effect
@manoo9088
2 жыл бұрын
Was thinking that but if the light is VERY far away e.g a cinema or stadium it may come in handy
@enuiltur
2 жыл бұрын
Just put invisible parts with spotlights around the map it works.
@madnessmyth
2 жыл бұрын
This would use more performance as it needs to fire rays of light further but with an attachment you don't need to do that, you can tell it to have the same range but start from a closer position to the ground for better performance.
@BallisticMF
2 жыл бұрын
exactly what i was going to type
@madnessmyth
2 жыл бұрын
@@BallisticMF beat ya 2 it
1:05 An exploiter can easily delete this client sided for them or even noclip through it Rather add some kind of respawn/death barrier Or something that can teleport you back to spawn
@caz8135
2 жыл бұрын
Use region3
@Lagejona
2 жыл бұрын
Or just use the setting to make for example an invisible wall non interactable with external tools, there is legit an option to toggle that, and when it comes to no clip, just use an invisible barrier that you can walk through and then add a kick script into it that runs when touched by a player
@Lagejona
2 жыл бұрын
Realized you basically wrote that lol, from now on ill always read a comment to the end
@Eric.31107
2 жыл бұрын
@@Lagejona no worries
@haaa4818
2 жыл бұрын
@@Lagejona cant they just delete the invisible barrier? i know some scripts allow a player to see all invisible objects
The wedge is a good hack, but if you want to walk under the staircase I would use a rotated part that is stretched to fit the staircase, so you can walk up the staircase and still go under it. Just a tip for those who want to walk under it. Great tips!
You can also make a rope attachment and use 2 attachments to make a swinging light if you didn't need the light shining.
The part with the light attachment and the part with the sideways bricks on the cylinder was super helpful info! I have been developing on here for years, and I never knew about those things, so thanks for teaching me something new!
5:43 that mistake made me laugh, love your vids! keep em comming!
Honestly these were really good tips. The only ones I already knew were the stair one and the ladder one.
For 7:50 solution 2: Increase the range of the spotlight.
@MaxBaxPamparapa
Жыл бұрын
exactly
@robloxfan4271
Жыл бұрын
that can work but it can also make it too bright
I'm only a player but I thought this was very interesting and has convinced me to become a developer again... *Have a sub, looking at your content... it will really help me out*
Really cool tips, thanks for making these tutorials for us!
2:14 Fun fact: If you're good at obbies you'll know how to climb that
1:42 that's not how cornerclipping or any clipping works, they can still danceclip
Hey RoBuilder, I'm a 36 year old non-Roblox player / dad of a 9 year old girl who adores Roblox. I've been using your videos to teach me how to create her a game and of all the people i've stumbled across on this journey - your videos have been best of combination of help and watchability. Cheers man
@RoBuilder
4 ай бұрын
I appreciate this loads!
I've seen this before quite awhile back, but I am even more excited this time because these are very intuitive and make a lot of great sense. I can't wait to try it!
4:30 I'm sorry but I almost died when I saw you doing that, omg just use studs, maybe lower the grid on the studs but it makes building and modeling so easy. Doing so as you described is extremely annoying for me since I got a shaky hand. But the grid on the baseplate and the studs are to help you with building or modeling in studio.
6:00 you could also make a ramp and put an invisible staircase on it just to anger the players :)
When it comes to lighting, the surface light functions a lot like a spotlight, but it is scaled to the size of the face. If you build an irregularly shaped light, such as a long fluorescent light, A surface light will do much better than a spotlight or a point light
what hotkeys did u use to make the invisible walls so quickly
@Unbocused
2 жыл бұрын
Control+D
@yoyo231
2 жыл бұрын
@@Unbocused Yeah but he resized it really fast
@yoyo231
2 жыл бұрын
@Kekky ohh
@jackthehacker05
2 жыл бұрын
@@yoyo231 Ctrl + D then Ctrl + R? Is that what you mean?
@lucasindisguise
2 жыл бұрын
hold control while sizing to size on both sides
The Roblox DCO community when you talk about glitching through walls: Let us introduce ourselves.
I'm being honest when I say I'm more experienced than I gave myself credit for. Regardless, it's awesome to see someone trying to help the newer devs with these quick tips. Good job with the video!
Thank you! I am a new developer and this helped really much :)
The last one was the only one I didn’t know about
I really want your lighting settings lmao
This is very helpful since me and my friend are making a game on roblox right now. You really help and I thank you for that.
Thanks alot! I was gonna make an RPG game like ark in a few Months or weeks and this is really Helping me!
@denidenideni508
Жыл бұрын
howd it come out
I honestly thought it would be a video where I can learn dev hacks, but uh guess I already knew them from the beginning xD
This is just my opinion because when I'm developing i like to make realistic builds, but personally I think the brick wall and lighting was the most useful
6:08 I would not recommend using this method because if you want players to walk under it, there would be no room because the piece of the wedge that is not directed to the staircase still has collistion, instead use a rotated part.
@breadguyy
11 ай бұрын
What about just a rotated part to fit the staircase, possibly at an angle of 45°?
2:46 i dont use trusses i just make very thin parts and then make the transparency on them 1 and just make a ladder out of that without making it evident that there is a big truss in between you and the ladder. i usually use this method for vines and stuff like that
@ImKent
2 жыл бұрын
That's not very optimized, I dont see why you wouldn't use trusses
@cloudy9873
2 жыл бұрын
@@ImKent you can ladder flick and ladders are really overall better than trusses
@shawermus
2 жыл бұрын
@@cloudy9873 also trusses is always the same x and z size no matter what so it could be a problem with small ladders
6:15 this is a collision slope, used on other old games like CastleVania for the same reason. Stairs are horrible to work, we need to agree with this
@bryceblazegamingyt9741
2 жыл бұрын
I use those in 2d game development :D
thank you for giving these tips to me, it'll help me alot in my games. you've earned a subscriber.
Thank you! I've been wanting to become a Roblox developer for some time so these TIPs are very helpful!
This is for beginners, lol. Every experienced developer kmow it.
@calebwick73
2 жыл бұрын
I agree he didn't even fix the light lol he just moved it.
@calebwick73
2 жыл бұрын
@dejiko Because I expected actual tricks.
@cheesemaster4132
2 жыл бұрын
I'm not even a developer and I knew half of these
@ChaosZTC
Жыл бұрын
True
what is the name of the application in which you do things into a get,
@yoyo231
2 жыл бұрын
wdym
@dat_o1
2 жыл бұрын
Its roblox studio
Thanks so much for this video it is gonna be really useful once I finally get my new computer and can work on some games I'm thinking of!
For the light part, I just used to make invisible parts that are in the ground, but attachments are way smarter if you wanna make like a movable light bulb on a string.
Still like it how he sounds like Morty.
@Comfez
2 жыл бұрын
Aw geez
@AreFedsOutside
2 жыл бұрын
Lmao
@rc8s
2 жыл бұрын
Oh jeez. W-w-w-what do ya mean he sounds like morty
Yes!!!, Probably one of the most helpful video so far!
Thanks for the tips, man. I learned some very useful things!
4:30 You can get this more accurately by using the snap feature. Adjust the stud number till you're satisfied then just duplicate and move, it does all the work for you.
if you have shift lock aloud for mobile and pc/laptop players, make these walls thicker than 1 stud. You can only do the glitch if the wall if smaller than 1 stud
I am King 😎
3:33 you can also use material flip (plugin)
Thank you @RoBuilder This really help me alot now I dont have to worry about lightnings xD
Thanks! This really helped me as a new developer.
4:03 don’t do this. Make a mesh instead, unions are glitchy and can cause lag, when you can just create a mesh in blender instead
@shawermus
2 жыл бұрын
Ah yes, we just need to go into blender(already hard for some users), understand controls that are not so user friendly and create a cylinder mesha and then export it, upload it to roblox, wait till it go through moderation and finally insert a mesh part. And ALL of that instead of going to properties and selecting cylinder mesh type
@marranin007
2 жыл бұрын
Unions are only glitchy when you try to carve in stuff using negative parts, if you're not trying to do that then unions behave just like normal parts.
@saltyboi2435
2 жыл бұрын
@@shawermus blender is super user friendly you have skill issue. Clearly you havent used blender before, meshes import inatantly theres no moderation. Im a self taught blender modeler and i make models everyday and import them theres no wait or moderation that delays your project. If your not willing to learn to use blender and instead use roblox’s shitty unreliable improvised modeling techniques then youre beta
@shawermus
2 жыл бұрын
@@saltyboi2435 ik that blender is super user friendly, but at least for me to understand interface and etc it took 30 minutes and 5 tutorials
@blingo_blongo
Жыл бұрын
it's faster to make a union
I have officially learned nothing
@guillaumepoulain1852
Ай бұрын
Same here
Ty this gave me my idea what to do in my game!
thank u for the guide, this will help me, when doing commisions perhaps and building!
thank you to support me being a developer from normal(useless) human
2:49 No need for that method. Make sure your ladder increments between your two bars say 0.5 stud tall. Go to model tab at the top, select movement and say make it 1 stud. Go back to the part you want to make climbable and press on your keyboard CTRL+D (Duplicate) And drag it up, because you have your movement set to 1 stud it'll always move 1 stud so you can do this very easy and effectively. Sorry if this made zero sense but I feel the way showed is slower and looks a bit trash (No offense intended at all good video for beginners)
Yo so...i got a problem with a game that im working on and i wish if there were some kind of way that we can teleport a part to abother part cause one of the parts are alot of far away so i cant move it cause its 2 far away do you have any tricks for this?
Genius! As a newcomer to Roblox Studio, I can't tell you how much I'll treasure all of these tips. Thanks!
As a player that has no pc, *i'm in pain*
2:42 Instead of making your game laggy, just scale it... Like, why duplicate? Just why? Edit: Guess you can't scale them 😅
@hamster3664
2 жыл бұрын
you cant scale trusses in both ways, they only get taller not wider so duplication is the only way to make them cover the entire ladder
@tekgewet
2 жыл бұрын
he literally tried scaliing it a couple of seconds before this, it doesnt work lol
@kaidenli
2 жыл бұрын
you would need an absurd amount of trusses to make it lag
@kgaming7599
2 жыл бұрын
@@tekgewet I swear I scaled it before
@runitsacow
2 жыл бұрын
@@kgaming7599 you didnt
it is pretty awesome to watch this channel grow
7:54 there is a simpler way to do this, just change the range of the light
First
@Vadaday
2 жыл бұрын
LIAR I AM FIRST
@thebiggestflop834
2 жыл бұрын
@@Vadaday but he was first
@Vadaday
2 жыл бұрын
no
@Vadaday
2 жыл бұрын
U can check
@ThatonePizzamaker
2 жыл бұрын
@@Vadaday just go check on new comments and scroll down and you see you arent first
God First Always!!! ♥️🙏🏾✝️ Jesus Died On The Cross For Us, And Rose 3 Day’s Later!!! ♥️🙏🏾✝️ Have A Blessed Day!!! ♥️🙏🏾✝️ Jesus Is Coming So Soon!!! ♥️🙏🏾✝️ Please Repent!!! ♥️🙏🏾✝️ Jesus Love’s You So So So So So X Infinity ♾ Much!!! Please Accept Jesus Into Your Life, And Your Heart!♥️🙏🏾✝️♥️🙏🏾✝️♥️🙏🏾✝️♥️🙏🏾✝️♥️🙏🏾✝️♥️🙏🏾✝️
@vgconyt6254
7 ай бұрын
jesus loves the rose toy
4:47 Another technique I use is to use F3X btools or change the increment when placing so I don't even have to delete it
Well i just started doing building. These are very helpful for my future game :)
For the barriers, don't add Cylinders, it doesn't prevent players from Glitching, make the walls thick (5 studs is a good size)
When you are building how do you paste or duplicate without it going to the top like when you ctrl v it goes to the top but when you are building it copies in place
These are so good that he should create a series over these tricks
5:20 SQUIDWARD GAMES
I’m not a big fan of the wedges method, though. It works, but the player will hover over the spacing between the parts of the stairs.
on the golden brick part... you can just union the wall and cylinder together.. but if you would want a wall as a door, then its really useful! :D (i fixed one grammar issue with the edit and made it more clear/understandable)
If you want evenly spaced pillars between two points, take the distances between the two points, subtract the width [W] of your part from the distant [D] to get the new distants [X] then devide that number by the amount [Y] to get the stud spacing [F] should look like this W-D=X X/Y=F
I havent made a game in a while because my pc's motherboard doesn't work but I'm pretty sure you can go to the properties of the light and increase the range. if you want more surface area covered by light and dont want to spam lights around, just increase the angle in properties
@BatteryChargingMaster
Жыл бұрын
Me getting ready to watch everyone not understanding that mobile exists:
@BatteryChargingMaster
Жыл бұрын
@poutineponton I'm talking about people asking "how are you typing then"
XD oh god. How did you end up on my recommended page? XD much love my dude.
@RoBuilder
2 жыл бұрын
Woooo
for the ladder you could also put the parts really close togethert but still with a gap in between because that also works
Thanks a lot for these! As someone who wants to make Roblox games (but sucks at it), these are great!
On the glitch one you can do a /e dance2 glitch, and with how thin the walls were it would be very easy
I never knew you could rotate the texture of cylinders, thank you so much!
I've ben developing for 6 years and there are a lot of stuff in this video I never thought of. Thank you so much for the tips!!!
most of these are either kinda obvious things or stuff that may seem smart to the normal eye but its actually a really bad solution to the problem (for example for the corner glitching thing you can just make the walls thicker instead of adding a cylinder or for the light you can just increase the range make the angle smaller to get the same effect)
1:22 thats not how corner cliping works 1:39 just make the wall thicker and add a ceiling so sometimes physics just don't make the player get flung outside the map 2:14 if you know how to do head hitters its possible (thats prob too high) 4:02 just use a mesh 4:30 can't you just increese the move increasements 7:43 just increase the range in properties
@fishdrip54
Жыл бұрын
ok but this is a begginers tutorial, they don't know allat
I'm pretty sure you can make the cylinder textures face the right way without the extra object, you just need to union it
Hey! Do you have any tutorials on how to negate and union stuff?
Saved my life with the brick one, thank you!
The last tip was a real game changer for the horror game I am making. Awesome video!
as an experienced dev, these tips are solid. Learned a lot of these through the school of hard knocks so listen to this dude.
For the lights and spot lights you could literally use the range to extend it further... Only need to do that when the range is fully extended and you still need it on the ground..
Hey ro builder do you know how to fix that smoke is round I want to make smoke go up into the air but I dont want it consuming the whole structure
Even though I'm not even a developer or having a pc to be a developer, but still, just learning this for fun, and also teaching people too i guess? [i still can use F3X but, that's not counted i believe]
Would like to know how to make a mesh not have cubic hotboxes like I tried making a squished sphere so I did something with the mesh on a regular part and that sphrere kept the properties of the part, despite being spherical if I went to an edge of it I would just walk on air cuz irl it's hitbox is a cube. Ngl I kinda abandoned Roblox studio not like I am gonna use it ever again because I have no knowledge on how to make things but it would just be nice to know how to solve one of my problems that's been tormenting me for 2 years
I’m an art developer/building dev this video seems really helpful for my builds!
The lighting one is definitely going to help me, I could never seem to get my lights quite right
thanks for the light attachment thing! I needed that for a lighthouse script
4:08 how i subscribed to you . Thank you so much for it!