All i heard was beep, beep, beep XD.

@thecontenttable2955

4 жыл бұрын

X to the fracking D that is funny

@TaeTaeyesyes

Жыл бұрын

Frfr

For valo/roces I have to size up two sizes. For example my foot is 27cm US 9 and I wear a salomon st US 9 27cm. In valo/roces I have to wear a US 11 29.3cm. This goes to show that some skate brands are far off on their sizing. I used to always skate a size 6/7 razors shell with size 9 liners. I feel like sometimes they oversize the shell or undersize the liner. Just some food for thought

I have a 9 wide foot, I got a pair of Shift 2s in the 8-9 boot, the size 9 Reign liner feels way too tight. My SL Blacks feel better with the Reign liners but I had to cut the front and the sides of the liners open so my foot would fit in them I'm looking for new liners for both. Any advice?

Can't wait to get my new rollerblade. It gets here Saturday yeyyyyy. Good video like always 👍

@BacktoBlading

6 жыл бұрын

Nice! What did you get?

@narutointel

6 жыл бұрын

Back to Blading. I got the Rollerblade NJ. It was my first choice of 7 skate i was looking at. But your review helped me a lot on making my final choice. I haven't skated in almost 17 years I think. Hopefully everything goes good. Thank you for your vids.

@BacktoBlading

6 жыл бұрын

Sweet! I think you’re gonna love them. Just be mindful of those insoles, lots of forward lean. If they ride weird for you at first, try swapping the insoles for the ones in your shoes and see if that helps.

@narutointel

6 жыл бұрын

Back to Blading thank you for the tip. I'll keep that in mind..

Loving the Mondopoint/CM sizing. Have been using it for a few years now, as I'm ordering more and more sneakers/skates online these days. :)

@BacktoBlading

6 жыл бұрын

Agreed. Standards are good. Everyone has a ruler, just go with standards.

@LeslieJones_RSTRCTD

6 жыл бұрын

Back to Blading I really hate all own US/UK/EU interpretations of brands so, let's just drop these and go for it! 😎

I just bought the Cosmo shift, do the liners also open up with some time? They feel a little tight out of the box even though the shell is 1.5 cm bigger than my foot (without the liner). Some insghtt pleeease!

@josermtz

5 жыл бұрын

hows it going

I'm a bit confused by the USD Sway sizing, my foot is 26.035cm. They say add .5 cm to it, I'm assuming I wear 8-9 (26.1-26.8cm). The roses m12 I ordered before was 8 and was just a hair to small so I'm hoping these fit better.

@BacktoBlading

Жыл бұрын

Sizing is tough. And I bet that 8 m12 would be perfect with a new liner. The 8/9 share a boot

Should i buy imperial 41-42 with 26.5 to 27.2cm lenght or there wont be enough room and should i get a size up, 43-44 with 27.8 to 28.5 cm when i measure my feet at 27.1 ? I do not know what to do since i can not try them. I have narrow feet so i wont have any problem with width. I read somewhere buy a size plus or let few mm in front for best fit. How many mm are considered ok ? So confused with Powerslide models, i am afraid double size.

@BacktoBlading

4 жыл бұрын

That’s a tough one. Personally I’d go with the 41-42 and wear really thin socks. Heat molding your liners will give you a little more space too.

So im trying to figure out what to order. I traced my foot with my heel against the wall. Im coming ho with 28.5 cm, the same as you said yku were in this video, but i wear a size 13. I cant even get my foot into a size 10, i know theres some difference from shoes to inlines, but i dont trust that id fit into a 10.

sorry to ask but can you tell me about the sizing,when you put your foot against the wall should you measure from the big toe to heel or from the babby toe to heel?im trying to get new skates.thx

@BacktoBlading

4 жыл бұрын

It’s the longest portion of your foot, so really depends which toe is longest.

So I wear size 11 in shoes what would I use for Bauer or k2?

@seife41

3 жыл бұрын

you need to test it out like he said lol and mesure it correctly

I wish we had sizing info for width on skates the same way we have for length. Sincerely, a guy with 5E width feet that has spent way too much time hacking skates apart with dremels over the years to open them up.

@BacktoBlading

6 жыл бұрын

Yeah man, I've heard that before. Have you tried the K2's or Carbon Free? I've heard they're pretty wide.

@CosmykTheDolfyn

6 жыл бұрын

Back to Blading No, I never have. Skates I stayed with the longest were some Genesys, or upsized RBs. Rode Xsjados for a while too, but I just didn't like the soul plate design, despite the comfort. Now I have some SL2s (the Yuris) cut to pieces on the inside to give me space and I just take them off every 30 minutes or so to get some pressure off of my feet. Nice thing about them being a skinned SL2 is that you can't see on the outside how much I have butchered on the inside.

Okay so I have 2 powerslide skates ... a 10,11 skate and a 12,13 skate. The smaller one fits snug, is hard to get on and off, and sometimes puts pressure/pain on the sides of my feet (i guess maybe too narrow), but the ankle support is nice. The bigger size feels like a sneaker so is a bit loose, doesn't give pain, but the angkle support is a bit too loose. My foot with no sock is 285mm and the skates are powerslide Next. What would you advise? Different liner? different brand? Thanks, love your channel, Manny

@BacktoBlading

5 жыл бұрын

Yikes! I‘m a 285 as well and loved the Imperials. The Swell are a bit tight, the Aeon and VII fit great. Powerslide sizing can be all over the place! What skates are you interested in? What sort of skating ?

@emmanuelrodriguez1693

5 жыл бұрын

@@BacktoBlading Thanks for the reply! I have the 11,12 for the Aeons and they're perfect. I was looking at the NEXT skates that have the sizing i mentioned above.

Hello! ) is it possible to make plastic shell some wider ? Maybe heat it and to expand locally, for example. Somebody tried it?))

@BacktoBlading

6 жыл бұрын

Yep, people do it. Depends on the material I'm sure, but showing something in there to stretch out the carbon or plastic is definitely something people do.

Ok so are the mm that are listed the length of the skate shell or the skate liner?

@BacktoBlading

6 жыл бұрын

Typically the liner has the measurements you need. The shell is usually designed to fit multiple sizes. So if you're a 28cm foot, you'd be a size 10 liner, but in the USD Aeon you'd have the same skate shell as the size 9.

Hi there, I have a question about the Aeon sizing. My foot at its' longest is 24.3, and the Aeon 60 I tried are 22.9 - 24.2. They feel really tight and constricting (without the laces laced), the bottom area of the tongue literally pushes out of the liner, and I can lift my foot up without the boot slipping when without the laces or the buckle closed. My toes feel like it's pushing at the tip of the liner, though my toes are not crumpled up. Is that too tight? The next size up is 24.8 - 25.5, but I don't know if that's going to be too big. Could it be that the boot/liner just need to break in, or does it just sound too tight? Thanks.

@BacktoBlading

2 жыл бұрын

Unfortunately I think your feet are the wrong size for Aeons. You really don’t want to go to that bigger size, they’ll feel like boats. Maybe the USD Sway would be a better fit for you.

@mountainpeakcloud8442

2 жыл бұрын

@@BacktoBlading Thanks for the feedback. I'm actually considering the Razor Shift now, but unsure about the sizing for me. Like I said, my largest foot is 243mm, and the smallest shift shell size 6/7 is 273mm, so that's a 3cm difference between the shell size and my foot. The 6 liner would be 240mm and the 7 liner is 250mm, so I'm almost in between the sizes. Do you think that would work for me, or is the 3cm difference between the shell length and foot length just too great and result in a sloppy fit once the liners break in? Thank you!

I just ordered the Aeons 72's and they're too tight. Is it possible to install a one size up liner? Thanks in advance!

@BacktoBlading

5 ай бұрын

Absolutely! I’d pull out the liner and stick your foot in the shell first though, just to make sure you’ve got room.

@AceEquality

5 ай бұрын

I ended up heat molding the liners and used a heat gun to fix some pressure points. They're perfect now! Thanks for the reply!

Hi I have a question for you. My inline skates are a little bit bigger than my current size. What should I do to fix it? Thank in advance!

@hallovelo9573

2 жыл бұрын

wear two pairs of socks

@jjjijikjhgftyuj7613

2 жыл бұрын

@@hallovelo9573 bro 💀

My foot measures 26.7 CM. The Aeon 7-8 shell fits 26.4 cm to 27.1 cm so I bought it BUT when I put it on my toes touch the front of the inliner. Is that expected? If I heat mold the liners will they become roomier?

@BacktoBlading

3 жыл бұрын

Yeah, they have a stretchy toe area to fit two sizes. Heat molding will open it up a bit and is recommended

@morelove619

3 жыл бұрын

I wonder the same thing, I bought Aeon 41-42 and my toes touch the front of the liner, I tried to put a bigger liner in and it felt good so I really hope the Aeon liner will stretch a bit:) How does your feel now?

@DanielVazquez

3 жыл бұрын

@@morelove619 what liner did you replace with?

@morelove619

3 жыл бұрын

@@DanielVazquez Salomon liner! But I tried to ride the Aeons for about 1 hour and it felt much better so I really think they will feel really comfy soon:)

Should I get a skate that matches my foot's centimeters or do I need to add 1-2 cm?

@klerkusmaximus

10 ай бұрын

Short: Get to know the mondopoint list from your desired skate and use their chart for conclusion of sizing. Long story: It really depends. I have heard of some people downsizing even their ice hockey skates like three or more sizes. I am not quite sure how they actually do it without hurting their feet. But it depends on the size chart of the different brands. Like for Powerslide HC Evo Pro EU 46 the mondopoint is 296 while on Rollerblade Crossifre Carbon their EU46 mondopoint is 298mm. Almost every company is true to their size chart. But keep in mind that almost every skate company doesn't give numbers on their wideness, while some pricier ice hockey skates do (Bauer, CCM etc.).

Been bugging you about all this thank yaaaa!!

@BacktoBlading

6 жыл бұрын

Appreciate the hint! If someone asks me a question, I assume a dozen people haven’t asked yet.

Me feet are 24,6cm. The Fatboy myfit liner in my skate says 24,8-25,6cm. Why do my toes touch the front of the liner and hurt when I skate? I should have room right?

Thank you, it helped me a lot. I wanted to buy a skate online but i always feared that it'd be too big got me, or too small. Thank you again!

I wear a size 12/ 12.5 and I have wide feet but don’t understand the letters

@BacktoBlading

2 жыл бұрын

It’s confusing for sure. I’ve been able to find a few translation guys online for foot size and foot width. Give them a search

My shoe size is a US 9.5...would I be better off with a 41-42 or a 43-44?

@nikkowhite7732

Жыл бұрын

@Isai Garcia what did you decide?

@nikkowhite7732

Жыл бұрын

@Isai Garcia lmao nooooo....lol ......thats to funy , mine came in yesterday and I love them . Your turn

I want an honest opinion my shoe size is 37 what size of inline skates should l.get

My feet 285cm.website only mention in EU size.so whats size should i go to?EU45-EU46?

@BacktoBlading

3 жыл бұрын

I’m 28.5 and go 44. Try that

@Aazeyl199

3 жыл бұрын

@@BacktoBlading okay thanks man

I wear a size US 13(wide) shoe size and I did the foot against the wall measurement deal and according to the Rollerblade size chart I would have landed on size 12 rollerblades. I used to Rollerblade 25yrs ago and I remember using a 13. Since there's none in stores these day I blindly ordered from Dick's Sporting Goods with a $20 coupon. I went for size 14 Lightning Urban and they fit perfectly. No toe squash. The length isn't even the important measurement, it's the width of your foot in the front at the widest point. So my conclusion is go a size above if you have even remotely close to wide feet. US 13 Wide = 14 Rollerblade. Hell, I would go 14 even if you're a normal US 13 shoe and use the insert pads they include. Having cramped toes is the worst. So painful. P.S.- Wear wrist pads/gloves so when you wreck you don't scrape all skin off the palm of your hands like I did.

@jameslackey8683

Ай бұрын

This is the reply I was looking for. I haven't rollerbladed since I was a teenager, but we have some great trails in my area, and I've been wanting to get back into it, but I'm having the hardest time sizing my feet. I did the feet against the wall thing and measured. My right foot is the biggest, and I'm coming up with 28.5 cm, exactly like that guy in the video, but he says he's in a size 10. I wear a size 13 wide shoe, like you, so I'm confused.

@bobertoroberto953

Ай бұрын

​@@jameslackey8683 I bought Rollerblade Lighting 80s. I would rate a good entry skate. The only downside was the top cuff area on my right ankle got kind of ground up using my normal ankle socks. I bought some nice thick work boot calf socks and they've been fine since. For the actual fit my big toe is roughly 3/4" to 1" back from the front of the shell. My pinky toe hits right at the beginning of the shell curve where it narrows. I have wide feet and if the shell was even 3/4" shorter in length my pinky would be smashed into that boot shell outside curve area and I would have toe pain. My feet are wide even in wide men's 13 US skechers shoes, so I could actually use a slightly wider shell. As I've been breaking them in their feeling more comfy. If I went with the size chart on the Rollerblade site I'd be in a 12 and they would have gone back immediately. Even a 13 I believe I'd suffer a bit, although I did skate Rollerblade 13's in my teens. I think my feet are fatter and wider now. Good luck, brother! Make sure to buy some wrist protectors/gloves with plastic protector disc and elbow pads. I got to amped up and went full speed, fell, and destroy the palms of my hands on rough asphalt. Like ground beef. I got knee and elbow pads, and Rollerblade fingerless gloves with plastic protective disc on the palms since then and I've had about 5 hard falls and I barely felt them.

@bobertoroberto953

Ай бұрын

@@jameslackey8683 I typed a long reply, but it disappeared for some reason. What I said was in the Rollerblade Lighting 80s size 14 skates I bought my big toe is 3/4"-1" from the front of the shell. My pinky toe is right up against the side of the shell at the exact part it begins to curve. If the shell was even 3/4" shorter it would be squashed into that curved section and I'd be in pain. Although I wore Rollerblade size 13 as a teen, my feet seem to have gotten fatter and wider in my old age. If I had narrow feet I could probably do a 13, but not with my wide feet that are almost too wide for men's Skechers 13 Wide shoes. Rollerblade 11 or 12 would be a total no-go. Go for 13 or 14. They include a foot sizer insert pad that tightens the skates. I tried it and it was too tight even on a 14. Some random notes about the Lighting 80s: A good entry skate. The right ankle/boot cuff was gouging my skin so I had to get some calf length thick work boot socks that fixed the issue. I had moderate heel pain when I started doing longer skate sessions, so I bought a gel heel pad at Walmart. I might have gone with Lighting 90s for the bigger wheels if I was more proficient, but I haven't bladed for 20 years. After wrecking and turning the palms of my hands into ground beef I bought Rollerblade fingerless gloves with the protective plastic disc on the palms along with elbow and knee pads. When I start practicing parallel/power slide I'm going to get the hip and tailbone padded under shorts. Good luck, man!

yes..we do knoe ruler

yes...it much better when it comes to cms

I'm a UK 12 what size skates should I get?

@BacktoBlading

3 жыл бұрын

Measure your feet in cm and let me know

Skate review on those Airwalks please.

@BacktoBlading

6 жыл бұрын

Ha! I would if they fit me.

Hey Back to Blading! sorry I don't know your name. Do you ship skates to Dubai, UAE.

@BacktoBlading

4 жыл бұрын

I’m not a shop, just a dude (named Lawrence). Maybe try Loco skates in the UK?

should i'll be able to spread my toe's ? Or is it ok if they are bending a bit?

@BacktoBlading

4 жыл бұрын

It shouldn’t feel cramped or uncomfortable, that’s for certain

My feet are 27 cm so what should I take

@BacktoBlading

Ай бұрын

Depends on the skates. Usually that’s a size 42. Some 42 skates are bigger than others though. Check the skate shop listing for their guidance for the skates you like

I favor men sizes. I wear 7.5 in women, how do i determine what male size to get?

@BacktoBlading

4 жыл бұрын

Measure your feet in cm, that’s the best way to know for sure.

@ajas9490

4 жыл бұрын

Yeah I’m a size 7 in women’s and measured 24cm. Which puts me at a size 5 in skates. Just bought the aeon 60’s at 5-6 and my guess is ur likely in that range too.

It usually comes with 24...25...41... so what is the meaning of this its usd size or euro....

Em vez de procurar por patins poderosos, tente procurar por patins que lhe encaixem bem. Provavelmente se vc tiver um patins que lhe sirva super bem, vc terá um relação duradoura e feliz com seus patins, tirando deles e de si o máximo. E como saber se o patins serve? A maior parte dos patins vem com a medida em cm - pegue uma régua, encoste-a numa parede e pise nela de meias e veja quantos cm tem seu pé. Os fabricantes dispõem em seus sites as medidas em cm e vários lojistas também.Há diferenças entre os fabricantes de patins quanto à largura - Powerslide e Valo costumam ser mais estreitos, enquanto que Rollerblade e Seba são mais largos (modelos não de competição, os de competição sempre sacrificam conforto por performance). Reza uma lenda que vc deve sempre comprar patins 2 números acima do seu pé - isso é besteira, vc não quer um sapato cheio de rodas amarrado nos seus pés se ele não for do seu tamanho exato.

@BacktoBlading

6 жыл бұрын

Through translation, this is good advice! Buy the skates that fit your feet, regardless of performance or review. Obrigado!

Nobody talk about brands that deals w witdh. So far seba or fr skates but still no data

@BacktoBlading

4 жыл бұрын

It’s something I’ll make sure to measure from now on

I appreciate the information, but that background....music?....is *very* distracting.

@BacktoBlading

4 жыл бұрын

Noted :)

I need a 14 or 15 seems impossible

@klerkusmaximus

10 ай бұрын

So your foot is probably >=32 cm? That is really rare for inline skates. But after a short research Rollerblade might have some up to 14.

Yeah, first again. 1)Like 2)comment 3)get myself a soda 4)watching your video

@BacktoBlading

6 жыл бұрын

Lol, as always

Too verbose. You could have just said, if you normally wear UK 8, Skate shoe Size 9/ whatever will be ok. That's what I was looking.

So if I’m a size 10.5 what skate am I 😂

@jakechuaweipeng

2 жыл бұрын

It'd be a 11 then. It's okay to have skates that are a tad bigger than one that doesn't fit you at all. You'll be able to get a thicker aftermarket liner if it doesn't fit snugly.

Please stop with the beeping sounds in your videos, makes them unwatchable

@BacktoBlading

6 жыл бұрын

Ok, I like it but enough people don't that I'll kill it. Thanks for the feedback.

@davebighos8370

3 жыл бұрын

You have got to be kidding me? Go skate instead of giving this guy a hard time about the music in his vid and providing YOU information