No video

Idle Screw Mod on my 2020 KTM 250 XC TPI (KTM/Husky TPI)

My 2020 KTM 250 XC TPI ran perfectly for 55 hours when it suddenly started idling too low. Neither of the fuel filters solved the problem, so instead of questioning what caused it further, I opted to install the Slavens idle screw. My bike now idles and runs perfectly, and I am very happy with the mod.
Slavens EZ Idle Screw: slavensracing.com/shop/slaven...
Pryme MX
Referral Link: prymemx.com/?ref=push
Instagram: / prymemx
Instagram: / kincadep
Action Sports Tutorials: pushdalimit.com
Tools and Supplies: pushdalimit.com/dirtbike-tool...
Beats by Chandler Bouldin: linktr.ee/ChandlerBouldinBeats
Chapters:
0:00 Why I'm doing the mod
1:35 Symptoms and what I tried
3:33 Removing throttle body
5:00 Replacing the idle screw
11:25 Reinstalling throttle body
12:10 Starting the bike
13:52 Post-ride assessment

Пікірлер: 16

  • @richieh7476
    @richieh74763 жыл бұрын

    crazy it takes a mod like this to make it idle right

  • @mschumaker1
    @mschumaker1 Жыл бұрын

    I have same bike. Nice video. FYI, I've talked to a lot of people about these bikes and they say that running a spark arrestor causes the CCPS to fail early.

  • @KincadePavich

    @KincadePavich

    Жыл бұрын

    Interesting... Haven't heard that one! My CCPS never failed on this bike.

  • @kellyjford1
    @kellyjford12 жыл бұрын

    I had idle issues, changed my ccps and this fixed the idle issue. Seems a lot of ccps units are bad.

  • @KincadePavich

    @KincadePavich

    2 жыл бұрын

    I heard CCPS would result in power issues with throttle response as well. Was yours solely idle? I never checked or replaced my CCPS, but bike has been running great since the idle screw mod.

  • @DarkVash07

    @DarkVash07

    2 жыл бұрын

    Would highly recommend you change your CCPS!! Buy an extra and have one on hand just in case.

  • @tannerschreiber9087
    @tannerschreiber90873 жыл бұрын

    Since you can run richer with this mod because the air bypass screw done at have to be pulled out to make the idle run better does this mean you have more low end power? I want to know if it’s a big enough change I should get one

  • @KincadePavich

    @KincadePavich

    3 жыл бұрын

    With my bike, I had never touched the air screw from stock. But once it stopped idling, if I turned the air screw out far enough for it to idle it ran like complete garbage and you could tell it was way too lean and had no power. Now with the idle mod, my air screw is pretty much where it was from the factory. I would not say I notice much of an improved bottom end response, but it does allow you to fiddle with idle/air screw combo to make the bike richer or leaner as you might prefer. I've fiddled a lot with the air screw within 1 turn in/out now that it's idling good, and have it running good. Overall if your bike idles fine I would probably not go through the trouble to do this mod in search of power gain. Let me know if that answers your question or you want any additional details.

  • @nightrider4370
    @nightrider4370 Жыл бұрын

    Mr. Slavens says it's not a "Mod" and he's technically correct. Lol

  • @KincadePavich

    @KincadePavich

    Жыл бұрын

    How so? I had to modify something

  • @nightrider4370

    @nightrider4370

    Жыл бұрын

    @@KincadePavich he said you're not modifying. You're just replacing and idol screw for another idle screw.

  • @KincadePavich

    @KincadePavich

    Жыл бұрын

    @@nightrider4370 after modifying the cover with a dremel lol

  • @nightrider4370

    @nightrider4370

    Жыл бұрын

    @@KincadePavich Tru lol

  • @donaldblank8873
    @donaldblank88735 ай бұрын

    And you never set the bike off until it is fully warmed up. You are fouling the plug

  • @donaldblank8873
    @donaldblank88735 ай бұрын

    Each time you touch that throttle you are fouling the plug. You do not touch the throttle on TPI bikes until they are at least a 140°. The ECU pumps extra oil before they are warmed up. By touching the throttle that just adds even more oil.

  • @lettyswift1405
    @lettyswift14053 жыл бұрын

    Heyyyy dear,check out my business inquiry email if you are free,looking forward to working with you! ☺❤️