No video
【idea of creation】Making a flat plate by wheel and slab
Combination of slab and wheel technique, beginner can easily make a beautiful plate.
----------------------------
Shinobu Hashimoto
HP: hashimotoshinobu.com/
blog: tenstone.exblog.jp/
fb: / shinobuceramic
twitter: / h_shinobu
Ig: / shinobu.hashimoto
【Original tools on sale】tenstone.thebase.in/
:Shooting Equipment:
camera:
SONY α6400 amzn.to/3wkMXxB
SONY ZV-1 amzn.to/35TVk6X
DJI OSMO POCKET amzn.to/2UcgA3Q
Canon EOS Kiss X8i amzn.to/2U2wsXD
lens:
Canon 単焦点レンズ EF50mm F1.8 STM amzn.to/2TVprHK
SIGMA 16mm F1.4 DC DN amzn.to/3dvObNM
SIGMA 30mm F1.4 DC DN amzn.to/3dpqGpE
mic:
SONY コンデンサーマイク ECM-PC60 amzn.to/2U60nxd
Alvoxcon ワイヤレスマイク amzn.to/2Vt6r2Z
ATEM Mini Pro tinyurl.com/y5vc6qjy
Пікірлер: 53
Your videos are so inspiring to me. Thank you for sharing!
Thank you for all your instructions
This is such a creative and excellent technique, really helps a beginner like me feel capable of making things. And to have the end result be so clean and precise is amazing 👌 Thank you for this lesson, Shinobu-san!
You have to dare, really learn a lot with you! It's crazy! Thank you very much... You are awesome teacher! Respect!
Merci à toi pour cette excellente technique.... Juste parfait
Thanks for subtiles and your explications
very unorthodox style, i love this
Thank you for adding translation
先日パリのミシェランスターのレストランに行った友人が写真を送ってくれたのですが、その中の一皿がとても素敵な日本的陶器の物でした。これを作ってみたいと思って、どうやって作るか思案していたところです。このビデオでバッチリです👍 ありがとうございました❗️
Thank you very much for all your instructions, and your inspiring work. I am wondering what type of clay you use. It looks likes it fires black? But it doesn't seems to be managnese. Can you share something about that? Lots of thanks!
I like those clips to keep the bat on the wheel. Could you tell me where to get them? Thank you!
thanks a lot !!!!!
Good Job
Beautiful! Thank you! How do you get it off the bat?
Thank you
Do bonsai pots!😍😍😍
круто и просто , спасибо мастер!
@Anika-Faystas
2 жыл бұрын
о, тоже довольно давно слежу!
Good evening Mr. Shinobu. The clay that you use in this video is for Raku or which one? Thank you. Marina from Italy
何時も素晴らしいご指導ありがとうございます。 早速アドバイス通りに 作ってみました。 ところが私のはケイカル板ではなく、木の板だったので綺麗に剥がすことが出来ません。下を表にしたいのですが、ケイカル板ですと剥がれやすいのでしょうか? よろしくお願い致します。
배우고 싶습니다!
Added subtitles
@jamelinabloob7205
2 жыл бұрын
Thank you so much 👍
@verar7861
2 жыл бұрын
Thank you
@Anika-Faystas
2 жыл бұрын
thank you, it would be good!
@ginoramos7884
2 жыл бұрын
Great video cheers
分かり易い説明をありがとうございました。切り糸をいつ使って外すのか、そしてお皿の場合ゆっくり乾かす事が大事と聞きましたが、橋本さんはどの様に乾燥を待つのか教えて頂けると嬉しいです。お願い致します。
@ShinobuHashimoto
2 жыл бұрын
この作り方の場合、切り離しは不要です。乾燥状態を見ながらビニールかけたりして調節しています。
@maribocreations53
2 жыл бұрын
有難うございます!
良い作り方を教えていただいてどうもありがとうございます。 橋本さんはどんな粘土を使っているのか、また亀板の質地教えて頂けると嬉しいです.
@ShinobuHashimoto
2 жыл бұрын
僕が使ってる土はオリジナルブレンドの白土です。亀板に使っているのは軽カル板です。
@johntcw
2 жыл бұрын
@@ShinobuHashimoto お返事ありがとうございます。どこからこの白土を手に入られますか?
@ShinobuHashimoto
2 жыл бұрын
自分で作ってます
But the big question is how to take that flat bottomed slab plate off the bat, without damaging the flat bottom?? One of the benefits of throwing a plate is trimming the foot after to eliminate all the wire marks caused by extracting a vessel from a bat.
@ShinobuHashimoto
Жыл бұрын
The slab plate is just on it, so it's not stuck. However, only the edge is treated with water, so it sticks a little. Cutting at the end solves your problem.
I do it the same way- just different. ;-)
いつも拝見し、勉強させて頂いてます。 私の場合、通常、古信楽の白をメインに使ってますが、動画で使用されてる土は何ですか?キメの細かいものですか? また、始めにたたらにされた量は2kgですか? 初心者なので、教えて頂ければありがたいです。よろしくおねがいします。
@itebe5466
2 жыл бұрын
先に古信楽白で、エイヤで作りました。 2kgで測ったかのように、29.5cm直径、要らない部分で十分ふちになりました。 ただ、粘土紐を作る時点でやや乾燥気味でした。 ありがとうございました。
亀板を留めているクリップ?のようなものは次作されたのでしょうか? 作り方や材料など教えていただきたいです。
@ShinobuHashimoto
2 жыл бұрын
クリップはワイパーの芯材を曲げて作ってます
not an unnecessary comment to raise the rating of the channel!
@Anika-Faystas
2 жыл бұрын
...it means... necessary comment!
亀板の材質はなんですか? プレートを亀板から外すため、切り糸を入れ、外すタイミングはいつですか? よろしくお願いいたします。
@ShinobuHashimoto
2 жыл бұрын
亀板は軽カル板で作ってます。この作り方だと最後に削り取った角の部分以外、亀板にはくっついていないので切り離しは不要です
@user-sb5dw1zv2q
2 жыл бұрын
ありがとうございます。大変参考になりました。
同じような形の大皿(直径30cm超え)を作った時、底の端が素焼、本焼きで割れ、結局8ミリでタタラ製造機を使って締め、ようやく成功しました。先生は底割れとかないですか?しめるのに、コテで何回もしめたのですが、何かいい方法あればお教えください。
@ShinobuHashimoto
2 жыл бұрын
僕の場合は割れることありませんが、やることといえば 「縁はコテを使って表だけじゃなく裏面からも。全体はゴムベラを使って表裏を締める。」 こんな感じでしょうか
@itebe5466
2 жыл бұрын
ありがとうごさいます。 ゴムベラ、使ったことないので、さっそく購入してやってみます。
@ShinobuHashimoto
2 жыл бұрын
@@itebe5466 kzread.info/dash/bejne/mqdqm6aOj5DHpdY.html
亀板を止めている器具は何処で買えるんでしょうか?
@ShinobuHashimoto
Жыл бұрын
自作です
English please
You are great at what you do and the video is very nice but the way you roll and knead the clay on the table looks very uneven and makes my head hurt.