No video
ID-COOLING HA-01 ARGB FAN HUB // 5V 3 PIN ARGB??? NO PROBLEM!!!
UNBOXING AND INSTALLATION GUIDE
ID-COOLING'S HA-01 ARGB FAN HUB
DO YOU HAVE 5V 3 PIN ARGB FANS? AND YOUR MOTHERBOARD ONLY HAS 12V 4 PIN FAN HEADER?
HAVE YOU BOUGHT FANS THAT DOESN'T COME WITH A FAN HUB?
THIS IS THE SOLUTION TO YOUR PROBLEM!!!!!!!
YOU CAN EVEN FIT 7 ARGB FANS INTO THIS FAN HUB!!!!
I USED THIS FAN HUB WITH ID-COOLING'S ZF-120125-PINK
IN THIS PC BUILD:
20K Php BUDGET PC BUILD DURING ECQ - RYZEN 3 3200g (TIMELAPSE BUILD):
• 20K Php BUDGET PC BUIL...
FOLLOW ME ON:
INSTAGRAM: / poldo_tan
Facebook page: / poldotanyoutube
Facebook Gaming: / poldogaming
MUSIC USED & CREDITS:
Medici by Ballpoint
Leaves by [ocean jams]
Then I Go by Damma Beatz
NO COPYRIGHT INFRINGEMENT INTENDED
#IDCOOLING #ARGB #FANHUB
Пікірлер: 150
Omg, I was looking for a hub to connect 6 fans like this (id cooling pink n white fans), tysm 👀👍🏽✨
@jerhits1317
3 жыл бұрын
jajaja Casual, just looking for information about the hub
@rymz2782
3 жыл бұрын
Hi i have the same problem😭, did it work?
I did daisy chain with my radiator fans+ pump rgb then and 3 fans from if cooling i plugged 2 cables from radiator fans pwm+rgb And 3 fans of cooling to hub pwm+rgb fans only worked but no rgb.
nice build bro. It would be nice if meron clang white na fans para more color options for build.
I’m really confused on all the extra plugins at the end. Is that all necessary after you’ve plugged in all your fans and gave power to the hub
@PoldoTan
3 жыл бұрын
2:50 - connecting 1 PWM fan to the F1 slot lets you control the fan speed. 3:05 - beside the F1 slot, there's a P.S.L port. you should connect the PWM and ARGB cable (included in the HA-01 package) and connect the other end to your MOBO. PWM should be connected to your MOBO's SYS_FAN header and the ARGB should be connected to your MOBO's ARGB 3pin header if it is available or supported by your MOBO. With that, you can control your ARGB through any rgb/argb software. In this video's case, the MOBO doesn't have a 3 pin ARGB header. That is why ARGB where just being controlled through RF (remote) Mode. Hope this helps. Please like and subscribe. Thank you! :)
i have the remote. but it doesn't work. the remote is on. but no respon to the pc
So i can use argb fan in my b450 tomahawk max?thats no have 3 pin connector
@PoldoTan
3 жыл бұрын
Yes you can, and control the ARGB through Remote. :) Please like and subscribe. Thanks :)
This video was really helpful! Is the HA-02 any different?
Thanks for the video! Keep up the good work my friend! ;3
@PoldoTan
2 жыл бұрын
Thank you so much! :)
Question po sir sana mapansin. Balak ko pong bumili ng Asus Tuf B550m na mobo with 1x 3pin header kakayanin po ba if gagamit ako nitong hub at nakasaksak ang 3x ID cooling DF 12025 (argb) fans + 2x fans ng Froostflow (argb) fans sa isang 3pin na header? Balak ko po sana iSync ang fans at AIO fans ko sa mobo na bibilhin ko. Salamat
@PoldoTan
3 жыл бұрын
yes po, kayang kaya po. ma ba-bypass na po ang amperage limit nang header kasi ang fan hub ay SATA powered na po. kahit mag add ka pa nang 2 more ARGB fans po, kaya pa nang fan hub. happy building po! Please like and subscribe. Thank you :)
Could you provide us links where you bought this stuff sir thanks 😊 great video
2:49 - this part is optional right?
@dale3445
3 жыл бұрын
from 3:05 onwards - my mobo doesnt have argb header, do I still have to do this? thanks in advance!
@PoldoTan
3 жыл бұрын
If you want to control your fans' speed then you need to connect the PWM input to your MOBO's SYS_Fan header. the ARGB input is optional, if your MOBO does not support it just hide the ARGB input like what I did with this build. Hope it helps. Please like and subscribe. Thank you :)
I have lian li case with 9 argb id cooling fan, 1 aio id cooling and 1 rgb gpu holder (all this have 3 pin) . How do i connect all this to this fan hub? Since i need it to control rgb from the remote.
@mijanj8959
4 жыл бұрын
But the hub only have 7 slot
@PoldoTan
4 жыл бұрын
Hi, You need to use 2 HA-01 for your set up. as long as your mobo has at least 2 sys_fan headers then you are good, you can control your fans thru bios or your mobo's software. for the argb you can control and sync all lights (fans) and gpu holder using 1 remote. at least you have a spare remote from the 2nd fan hub. :) Happy building! Please like and subscribe. Thank you :)
@mijanj8959
4 жыл бұрын
Hi. Thank you for answering. One last question, is it okay to use the splitter to one led hub? 3 argb pin to one port (ha01 hub). Sorry newbie
@PoldoTan
4 жыл бұрын
@@mijanj8959 I'm really not sure, but personally I would not advise you to do that. As it will have a chance that it will exceed the maximum wattage that the hub can handle. it's better to spend a little money and be safe than sorry. :)
@mijanj8959
4 жыл бұрын
@kid asvbe pardon. Does that mean i can use splitter argb? To one argb on the hub? Since it has 7 slot.
by any chance anyone knows the button on the right side of W (White) button, what does it do? what happens when you press it? (right side of W and above B) thanks!
helped me lots thank you so much
@PoldoTan
3 жыл бұрын
glad to help! Please like and subscribe. Thank you :)
Whats the setting button for?
can it just power a non rgb fan cuz im not using rgb stuffs at all
Do you have any idea san pa po pwede makabili? Out of stock.kase sa link you provided in the comment section. Thanks! More power sa channel!
@PoldoTan
3 жыл бұрын
Try nyo po sa FB Page nang Softbox Solutions. Please like and subscribe. Thank you :)
Hi... i hope someone can help me answer this question... if i connect to led strip instead of fan... will this controller work and i can also switch the led strip color to white or rgb?
Hello can I daisy chain and get all lighting effects in an order?
can you switch the mode on the remote? seems kida stupid to have a switch on the hub when its in side my pc. I wouldn't want to take the panel off just to switch a mode
@mellowwwy
3 жыл бұрын
i think you need to buy the ha-02c which is the remote controller included version
If there is no argb fan input on the motherboard, will the product work?
That helped so much! but i have a question. can i plug the 3 pin argb connector of the xpg prime vga argb extension to that fan hub? or its just for fans?
@havemercymr.toughguy7125
2 жыл бұрын
You can
nice set up bro can you drop the link where you bought the fan hub?
Boss pano kung 6pcs zf12025 at id cooling zoomflow 240 parehas silang 3pin tpos ung mobo ko 4pins. Gagana kaya sila parehas? San ko icoconnect ung zoomflow 240 na 3pin?
@PoldoTan
3 жыл бұрын
Since hindi supported nang mobo mo ang argb lights / 5V 3 pin, you have 2 options po boss to sync it all, 1. pwede ka gumamit netong HA-01 7 port fan hub, connect mo 6pcs zf12025 and yung zoomflow 240 mo saktong-sakto 7 lahat. for your zoomflow 240 gamitin mo yung kasamang splitter, dun mo e.connect lahat nang rgb cables nang zoomflow tapos yung end nang splitter dun mo e-connect sa HA-01. you can control all the argb lights using the remote control of the HA-01. 2. do the same thing and buy a 5V 3 pin to 12V 4 pin converter, like Deep Cool rgb converter. with this option you can control your argb lights through your mobo. Please like and subscribe. Thank you :)
great vid bro. can i ask if i can hook this up with deepcool’s rgb converter from 5v to 12v? my mobo only supports 12v
@OCMonke
3 жыл бұрын
it should work but it will just do RGB so u lose the ARGB functionality. I had that Deepcool converter and its just one color at a time.
What's the diff. Between HA-01 and HA-02?
So this is definetly a fan and rgb hub?
Can I use mobo sync with the hub?
@PoldoTan
3 жыл бұрын
yes you can if your MOBO supports argb 3pin 5V.
Omg! this is great!
I have my ID Cooling fans plugged into the hub. I have the asus prime b550 board and it has a 5v argb header. What cord do I plug into there from the hub to control the fans and the argb from the mobo? Thanks
@whisperviz1346
3 жыл бұрын
you need to connect both your b550 board and the idcooling hub using the 3 pin Argb cable.
There is no HA-01 version here in Turkey. There is only HA-02. Can I plug a buttoned remote controller on HA-02 like this one?
@PoldoTan
3 жыл бұрын
I believe HA-02 does not support remote control function. HA-02 is just plain MOBO sync.
@arkutakaln4081
3 жыл бұрын
@@PoldoTan Do you think I can plug a remote controller device to HA-02? There is also RF vs MOBO switch on HA-02. What do you think?
Sir just want to make sure, need ko ito for my Gigabyte b450m gaming mobo if gusto ko mag lagay ng ARGB fans? thanks and more power
@PoldoTan
3 жыл бұрын
Yes po, you need this if ARGB fans ang ilalagay mo kasi, 12V 4pin lang ang meron sa B450M gaming. Happy building! Please like and subscribe. Thank you :)
Is this compatible with other fans non from id-cooling?
@PoldoTan
3 жыл бұрын
yes, just make that your fans does not exceed the maximum amperage of the fan hub which is FAN (2A) and RGB (3A). Please like and subscribe. Thank you :)
Nice editing bro, but is this hub can be use for other brand fans beside idcooling fan?
@PoldoTan
4 жыл бұрын
Thank you! and Yes you can use different fans / different brands for this fan hub. :) Please like and subscribe. Thank you :)
@kyrieirving5440
3 жыл бұрын
@@PoldoTan what about no brand fans?
Bro can how about id cooling can i connect to my rgb fan hub?
@PoldoTan
3 жыл бұрын
Yes it can, I'm also using an id-cooling fans. Please like and subscribe po. Thank you :)
Bro gagana ba ito on other brand ng fans? like cooler master or pc cooler
@PoldoTan
3 жыл бұрын
yes po bossing, just make sure hindi sosobra ang amperage sa maximum amperage nang fan hub which is FAN (2A) and RGB (3A). Please like and subscribe. Thank you :)
pwede pa po kaya mag add ng splitter sa tig isang slot ng hub. balak ko kasi mag palit ng case. Tecware VXR. 9 fans po sana balak ko. possible po kaya yun?
Poldo Tan Ask ko sir if nalilimitahan po ba ang performance ng fans pag naka splitter lang? I’ve read po kasi na mas better daw po pag naka fan hub para ma maximize performance ng fans unless merong “5v add_header” daw ang mobo which is di ko po makita sa mobo ko nung nagbbuild ako. Currently using an ID Cooling DF12025 and a MSI B550M mortar wifi mobo. Newbie po kasi ako
@PoldoTan
4 жыл бұрын
Hi po bossing! your MOBO supports argb po, try mong hanapin nasa baba JRAINBOW1. for the splitters po, hindi naman po malilimitahan ang performance, if you are concerned for the ARGB lights, you can daisy chain up to 6 rgb or argb lights into a 1 header. for the fans itself, one header can take up to 4 fans at most. you should be concerned of the maximum amperage that a single header can handle po kasi yan yung delikado ma overload ang isang header and it would damage your mobo po. kaya mas safe kung gumamit nang fan hub para po fair yung distribution nang amps kasi powered ang hub through SATA na connected sa PSU. Please like and subscribe. Thank you :)
Sir tanong lang. 1. Hindi ba tanggal ung limit ng argb headers na 3.A kasi gumamit ng sariling power supply un mga nakasaksak sa hub? 2. If ever okay lang ba argb connect dyan sa hub? Ung fans ko kasi molex ung connector not sure if gagana ung hub kung argb pins lang ang nakasaksak
@PoldoTan
3 жыл бұрын
1. Bypass na po siya, as long as hindi mag exceed sa maximum current nang fan hub. 2. It will work, just use a molex-5v 3pin adapter cable para ma connect sa fan hub. Happy building! Please like and subscribe. Thank you :)
@rensquared24
3 жыл бұрын
@@PoldoTan thanks sir! Ung sa number 2 po, I mean if ever kasi ARGB cables lang co-connect ko sa kanya at hindi ko magagamit ung PWM fan part (since rekta PSU ung power nung fans ko). Okay lang ba yun?
where is the link? where to buy
Sir i have trio idcooling 12025 with splitter (x4), supported po ng mobo ko yung 3 pin (add_header), kaso meron din po ako aio Darkflash twister with series/splitter din, ngayon di sya magkasya dun sa splitter ng idcooling maluwag masyado pero parehas 3pin, yung splitter na yun kasi ang gagmitin ko iplug sa add header para lahat sila naka aura sync, kelangan ko pa po ba mag fanhub and supported po kaya nito magkaibang brand? IDcooling fans + Darkflash twister 240 po.
Boss, gumagana ba ang fans ng ibang brand kagaya ng Deepcool, Coolermaster, etc..?
@PoldoTan
3 жыл бұрын
yes po bossing, just make sure hindi sosobra ang amperage sa maximum amperage nang fan hub which is FAN (2A) and RGB (3A). Please like and subscribe. Thank you :)
@justvincent6602
3 жыл бұрын
@@PoldoTan Subbed na po boss, double check lng po kung gagana po ang rgb ng Aio dito?
Hi i bought ha-02 how can i switch between RF controller and mobo software while this switch button ain't available?
@PoldoTan
3 жыл бұрын
Hello sir, unfortunately HA-02 does not have a RF mode or function and you can only control the ARGB through your MOBO if it is supported. HA-01 only has both RF mode and MB Mode.
@dalileddineslimani6399
3 жыл бұрын
@@PoldoTan it's supported
square pins ba yung para sa argb? gagana ba yan sa square pins ng x470 aorus 5 na walang kasamang ibang cables? may dled, vdg, 12vgrbw yung x470
@PoldoTan
4 жыл бұрын
argb should be 3 pin 5V po. depende po sa mobo nyo if supported ang argb, kung may "+5V D ADD_HEADER" kang makikita diyan mo po e.connect ang argb. at depende po ilang argb fans, led strip, etc. ang meron kaayo pwede kayo gumamit nang extension cables, splitter or fan hub. Happy building! Please like and subscribe. Thank you :)
Pde ba to sa AIO at noctua fans lods? :D Just wanna make sure :D
@PoldoTan
3 жыл бұрын
yes po bossing, just make sure hindi sosobra ang amperage sa maximum amperage nang fan hub which is FAN (2A) and RGB (3A). Please like and subscribe. Thank you :)
@2ez4Milky
3 жыл бұрын
@@PoldoTan Lods, fan 1 lng ba madedetect? Full speed ba ang ibang fans? Or mag aadjust ang fan speed ng lahat ng fans depending sa temps?
@PoldoTan
3 жыл бұрын
@@2ez4Milky ma-aadjust mo speed lahat nang fans just make sure may naka connect sa fan-1.
pwede kaya to sa bykski aio at byski antisag at darkflash dr12
Bro this can be use to control an ARGB cpu cooler?
@PoldoTan
4 жыл бұрын
Yes it can, just leave the cpu fan connector to your MOBO's cpu fan header and connect the argb connector to the fan hub. Happy building! Please like and subscribe. Thank you :)
Compatible ba to sa ibang brand ng fans? Or Dapat id cooling din na fans ang gagamitin? Pc cooler kasi yung brand ng fans ko. Salamat
Ano nagagawa nung lock and tool icon button? :)
San ka po nkabili ng pink 24 pin cable extension?
Sir naka argb ako ano po ung icoconect ko sa 3pin? Same hub po tayo sinunod ko lang ung psl naka connect sa sys fan. Thanks
@PoldoTan
4 жыл бұрын
may 3pin argb header ba ang mobo mo boss? if meron dun mo e.connect. if wala, e-set aside mo nalang ang 3pin connector at e-tago tulad nang ginawa ko tapos through remote ka nalang mag control nang argb lights mo. hope this helps your question po. :)
Sir, May we know if any brand of fan will work with this hub? as long as it is 3pin 5v?
@maddymuhat8079
3 жыл бұрын
Same question
@sageofsixpath99
3 жыл бұрын
same question, i bought coolermaster mf halo and some led did not work when i plug it using my pccooler hub,.i’ve read somewhere that some hub cannot support more than the desired led,.like example the fan have 24led and hub is only program for 20
Is it software controlled? Specially yung mga fan speed?
lods pag gumamit naba ng hub na sata/molex power ay ma babypass na yung limit ng mobo na tulad ng saken is 3pin 5v 3A max?
@PoldoTan
3 жыл бұрын
technically yes, kasi SATA powered na po siya. It's up to you nalang po if you want to control the rgb through your mobo or using a remote control. Please like and subscribe po. Thank you :)
@elrajes3581
3 жыл бұрын
@@PoldoTan yung specs kac ng mga hub lods is max 3.5 amperes lang 😰
@PoldoTan
3 жыл бұрын
@@elrajes3581 4 fans=1 amps, not really 1A but almost at 1 Amps. yan yung maximum limit nang isang rgb header. but since naka hub ka hanggag 3.5A ang maximum. so it technically answers your question po na na bypass yung limit nang mobo since SATA powered na ang hub.
@elrajes3581
3 жыл бұрын
@@PoldoTan deepcool cf 120 lods fan ko kinakain daw na ampere is 0.48A isa 😰
@PoldoTan
3 жыл бұрын
@@elrajes3581 have you tried deepcool's fan hub? yung FH-10 nila na hub mas okay yun at least deepcool din.
Asttig neto. Medyo nasasgot na mga tanong ko. ask ko lng din po sir if need ko pa po ba ng converter etto po kc mother board ko msi b250 bazooka ganyan po ung fan na binili ko kattulad sau hndi ko po kc alam kung may 3pin sa mobo ko baguhan lng po kc ako. sana matulungan nyo po ako Salamat po
@PoldoTan
3 жыл бұрын
No need na mag converter boss. Pero if gusto mo e-control yung lights using mystic light, then pwede ka gumamit nang converter tapos connect mo sa 4pin rgb header nang MOBO mo. may isang 4pin rgb header ang b250 bazooka. Pero kung eto lang fan hub gagamitin mo you can control it using the remote control po. Please like and subscribe. Thank you :)
@mickelqoh4897
3 жыл бұрын
@@PoldoTan maraming maraming salamat sir.. Done subscribe na po.. Isa nlng prob out of stock mga onlline seller like lazada and shoppee . hirap mag hanap ng ID cooling HA-01 hub
@mickelqoh4897
3 жыл бұрын
@@PoldoTan ssir pa help naman sasn pa po ba mkaka bili ng ganyang hub. ang hirap mag hanap.. salamat po advanced
@PoldoTan
3 жыл бұрын
@@mickelqoh4897 sorry po, hirap na kasi makita pag naka thread na yung comment. anyway, try mo sa softbox solutions boss. search mo fb page nila may marami silang stock last time pag check ko. try mo din search yung bagong model neto. HA-02. goodluck boss! sana maka hanap ka. thank you :)
Ask ko lng po pag yung hub 3 pin and yung rgb header 4pin? May sulution po ba? Para ma snyc paden?
@PoldoTan
4 жыл бұрын
argb 3 pin yung fans mo? and 4 pin header lang supported nang mobo mo? yan po ba ibig nyong sabihin? yan na po ang solution sa video ko kasi isang 4 pin rgb header lang meron sa gigabyte b450m-ds3h. Happy building po! Please like and subscribe. Thank you :)
@sageofsixpath99
3 жыл бұрын
bili ka deepcool rgb converter para ma control mo sa motherboard 4 pin to 3pin
Pede ren ba tong pwm? Or for argb controller lang to?
astiga pol. pa giveaway b hahaha
@PoldoTan
4 жыл бұрын
soon... gamayng huwat nalang hehehe
Bro there is a id cooling ha02
@PoldoTan
4 жыл бұрын
Good to hear that! I looked it up and the only difference is that they added 1 more hub so ha-02 has 8 hubs while ha-01 has 7. it's actually new, at the time I bought this ha-01 there was still no ha-02. Thanks for the update! :)
@BLISSEcstasyGAMING
4 жыл бұрын
@@PoldoTan but I think ha02 supports a new lighting effect the asrock polychrome sync
Sir Tanong lang pwede ko ba maconnect yung 6pcs ID COOLING DF-12025-ARGB TRIO and yung CPU Cooler na ID COOLING SE-224-RGB na 4pin sa hub then naka b450m steel legend po ako na meron isang ARGB Header or mas advisible yung remote since medyo buggy daw yung polychrome ?
@PoldoTan
3 жыл бұрын
pwede yung 6pcs na DF12025 since 3pin ARGB yan, pero yung SE-224 RGB mo hindi pwede sa hub kasi for 3pin ARGB lang ang HA-01. you can connect it directly sa mobo though may 4pin RGB header naman yang mobo mo. for your 2nd question po, it's really up to you po if anong preference mo kasi ako personally mas convenient sa akin ang remote since pindot2x lang whereas through software, though pwede kang mag save nang mga presets mas hassle sa akin especially while in-game or while working kasi need mo pa e.open yung software and mag set kung anong gusto mong light settings. pero it's really up to you po. :) Good luck po! Please like and subscribe. Thank you :)
@fractal844
3 жыл бұрын
Ayun salamat sir Kudos sayo!
Does the controller work on all argb fan?
@whisperviz1346
3 жыл бұрын
it should work with all 3 pin Argb fans. i already tried using both corsair and Msi 3pin argb fans
Hello ask ko lang 4pin yung Mobo ko what to do
@PoldoTan
3 жыл бұрын
Like what I did po. I just control the rgb using the remote that comes with the fan hub. This is exactly what the video is about po. Thanks :) Please like and subscribe :)
Can this handle 10pcs cf 120-argb fans?
@PoldoTan
4 жыл бұрын
it's a 7 port hub, so it can only handle up to 7 fans. there is a new version though, HA-02 which has 8 ports.
@jimuelalejo7501
4 жыл бұрын
@@PoldoTan sadly i need 10 ports
Sir nakabili ako ng HA - 02 kaso 3 Pin pala, ang MOBO ko is B450 tomahawk max. which only support 4 PIN RGB. help :/
@PoldoTan
3 жыл бұрын
boss, HA-02 doesn't have an RF function. HA-01 ang need mo boss para tulad sa case nang video na eto through RF ko kinokontrol ang ARGB.
@maddymuhat8079
3 жыл бұрын
@@PoldoTan boss what if msi b550m ang mobo ko which is my argb fan header siya pero gusto ko may rf function padin at pede din controllin via mobo. Ha01 ba dapat kunin ko.
Sir asan nyo po nabili yung fan hub? Thanks po :)
@PoldoTan
4 жыл бұрын
Hi po, sa shopee po sa softbox solutions na store. eto po shopee.ph/shop/8595149/ Please like and subscribe. Thank you :)
Hi po, yung mobo ko po kase is 12v 4pin lang meron which is msi b450m tomahawk max, kapag ba umorder ako neto yung fans kong argb eh magagamit at masync po ba sa mobo?
@PoldoTan
3 жыл бұрын
hello po, unfortunately you can only control the argb using the remote po. Since walang 5V 3 pin yung mobo mo, hindi ma sisync yung argb sa mobo.
@MonesahBuson
3 жыл бұрын
@@PoldoTan bale kelangan ko po ng hub at remote tama po ba?
@PoldoTan
3 жыл бұрын
@@MonesahBuson yes, the remote is already included na po.
@MonesahBuson
3 жыл бұрын
@@PoldoTan thankyou, nga po pala may lazada or shopee link po ba kayo nito? wala kong makita eh
Hello bro, need ko rin ng ID-COOLING HA-01 ARGB FAN HUB no? ASUS EX H310m v3 mobo ko.
@hapitots.
3 жыл бұрын
pwede pa link kung san ka bumili bro?
@PoldoTan
3 жыл бұрын
Yes, if ARGB po ang mga fans mo. and if RGB po, need mo ibang RGB fan hub po and control it using a remote po kasi wala pong rgb at argb header ang H310 po. Please like and subscribe po. Thank you :)
@PoldoTan
3 жыл бұрын
@@hapitots. non-existing product na po siya sa Shopee try mo nalang search sa ibang seller po or message sa FB page nang Softbox Solutions dun ko po nabilin yung HA-01 ko po. :)
sir saan po kayo nakabili? ang hirap hanapin neto
@PoldoTan
3 жыл бұрын
try nyo po sa softbox solutions. sa fb page nila.
First!
@PoldoTan
4 жыл бұрын
Thank you! :)