I looked at the title of the video, then watched the video and realized that you are right. I wish I had known these tricks when I was young. Ha ha ha, don't regret what you missed. This is the most beautiful video I have ever seen. I thank you for sharing it and I wish you all successes in life

@creationholic101

5 ай бұрын

Hello. Thanks for your positive feedback. Wish you all the best!

@ahmedalnaqbi2889

3 ай бұрын

11:00 11:02 11:11 11:46 11:47 😢

@user-fn6kx8qp3x

12 күн бұрын

😂

Súper interesante todo lo que usted hace en sus videos felicitaciones

I had learned so many ideas from you that inspired me. I don't get any best words to say instead of thank you to you from my heart. 🙏

@creationholic101

5 ай бұрын

Hello! I am very happy to read your comment. Have a good day!

Amei demais. Nunca é tarde para aprender, mas ensinar o que sabe para qualquer idade é algo emocionante.

@creationholic101

3 ай бұрын

Thank you! Cheers!

Mantaaap tutorialnya..trinakasih smg jaya terus.. tutorial yg lebih kren lagi..👍👍👍🙏

@creationholic101

Ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Mulțumesc mult pentru informații 🎉

@creationholic101

5 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

In the first ‘tip’ he marks the drill to say where the rivet goes, why not just use the mark? Then he wouldn’t waste a rivet, nor risk the drill!

@creationholic101

Ай бұрын

When drilling many similar holes you will need it

@Rockyu-ym3dq

Ай бұрын

Or just use tape

Yo lo veo desde ESPAÑA y me encanta todo lo que haces.

@creationholic101

5 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Gostei muito me ensinou muitas coisas que eu não sabia,e nem tinha idéias.💡

@creationholic101

5 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Sir, you are GENIUS! Thank you for all the help you are providing us with!

@creationholic101

Ай бұрын

Thank you! Cheers!

Genial. Gracias por compartir.

@creationholic101

5 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Many thanks for sharing your amazing tips with us. Very useful. 🎉

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

Thank you for the good content, I learned something new.

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Great tips, thank you!

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

Exelente ideias e são bem úteis

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Ingenius work, thanks. From Algeria

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Gostei !!! Muito boa essas dicas

@creationholic101

5 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

ผมอยู่ประเทศไทยครับผม ขอขอบคุณครับผม

Loved your video. Can I ask what glue you are using? It looks very fluid. I also watched your other video and was already wondering that. Thank, keep up the good work.

@creationholic101

2 ай бұрын

cyanoacrylate adhesive glue

Desde España, y es fenomenal lo q aportas👏👏

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Just yet another great video that is why I subscribed a while back. With reference to the wire joining, I would be inclined to finish it off with tinning (soldering) and then using "shrink tubing" of the equivalent size that then makes it totally safe

@creationholic101

24 күн бұрын

Hello! thanks for your recommendation. Wish you all the best!

You are a genius person.❤❤❤

@creationholic101

2 ай бұрын

Thank you! Cheers!

3:33 โมหัวยาแนว 20:17 ต่อท่อน้ำทิ้งขาด

muy bueno lo tuyo !!!! Gracias

@creationholic101

5 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Parabéns! Creio ter sido o melhor vídeo do gênero que já assisti... 👏👏👏

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Un saludo desde Juncos Puerto Rico muy buenos videos

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Great video! Thanks to this video, I learned many more interesting things

@creationholic101

Ай бұрын

Glad you like them!

기가 막히네요👍

@creationholic101

4 ай бұрын

Thank you! Cheers!

Yep 🖐️is possible a New vídeo for How to place xps panels on the floor in a triangular shape

@creationholic101

6 ай бұрын

Hello! thanks for your recommendation. Wish you all the best!

Encantanncantado de ver estos vídeos ilustrativos saludos desde Los Girasoles Municipio de Charo

@creationholic101

2 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Impresionante fantástico Florida❤

@creationholic101

2 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Parabéns, excelentes suas idéias, porém quando usar um estilete ensine usar de forma correta ou usar luvas de aço.

@creationholic101

24 күн бұрын

Thank you! Cheers!

Videonya keren banget,terima kasih!!

@creationholic101

3 ай бұрын

Thank you! Cheers!

Gracias por tu genial!

@creationholic101

4 ай бұрын

Glad you like them!

Super Sicherheitsschuhe beim Sägen!!!

@creationholic101

3 ай бұрын

Thanks so much for watching our video. Wish you all the best

Ciao complimenti per i tuoi video ,vorrei chiederti potresti aggiungere il link dove vendono la super colla grazie

@creationholic101

6 ай бұрын

cyanoacrylate adhesive glue

LOVE THIS!!!

@creationholic101

5 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

請問片中的的白酒指的是甚麼? 一般超市買的那些喝的白酒嗎?

@creationholic101

5 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

#4 was definitely discovered in the 80’s 😂

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Boa noite! Meu nome é Regina; sou Brasileira e seu trabalho é realmente maravilhoso! Tiro muito proveito em aprender coisas úteis com seus vídeos; Parabéns!!!!!!

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Vặn vít 4 hướng cùng chung điểm gốc,khi vặn không có lực đè mạnh,nên hiểu quả không cao.Cám ơn tác giả,mong được đọc,xem nhiều clip của bạn!

@creationholic101

5 ай бұрын

Thank you for sharing your feedback. Have a good day!

Goodyear vieso my friend Brasil 🇧🇷

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

เยี่ยมไปเลย

@creationholic101

4 ай бұрын

Thank you! Cheers!

Hi. What do you add to the baking soda?

@creationholic101

5 ай бұрын

cyanoacrylate adhesive glue

Surprised he has any fingers left that way he uses his knives and tools. That’s the best tip.

@creationholic101

5 ай бұрын

Thanks so much for watching our video. Wish you all the best

Very good ideas..... 👍

@creationholic101

5 ай бұрын

Thanks a lot

Zakovica??? Kaže se nitna. Pozdrav. 👍🥁

@creationholic101

Ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Can someone explain for me, please, why I can not just drill my wood with a clear bit and have to waste time on setting some "protection" and ruin for that other instruments? Not saying, I will have to put it off somehow later.

For #29， what is the gel? and what is the water?

@creationholic101

5 ай бұрын

clear silicone, Butyl axetat (CH3COOCH2CH2CH2CH3)

vật liệu có ký hiệu soda , để vá vết vỡ , có thể mua được ở đâu vậy ạ?

@creationholic101

4 ай бұрын

drug stores or e-commerce platforms

Wonderful！

@creationholic101

5 ай бұрын

Thank you very much!

من العراق ❤

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Minuto 5,04 y cuando en tornillo ofrece gran resistencia que.... minuto 10 pincel que solo sirve para una sola vez vuelve a pintar con otros colores y ver si funciona....

@creationholic101

5 ай бұрын

Hello! thanks for your comment. Wish you all the best!

8:38 сверлит щетку на реверсе)

@creationholic101

Ай бұрын

Thank you! Cheers!

Bien

desde cuando la silicona se mezcla con el agua?

@creationholic101

Ай бұрын

Butyl axetat (CH3COOCH2CH2CH2CH3)

I am vietnamese , verygood

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Nisi snimio skidanje nitne na burgiji!! Žrtvovao si burgiju?! Pozdrav. Nisam hejter nego majstor i samo gledam šta snimate. 👍🥁

@creationholic101

Ай бұрын

thanks for your comment. Wish you all the best!

Don’t do the whetstone one because you’re just going to get plastic particles in your drone and you don’t want that

@creationholic101

25 күн бұрын

Hello! thanks for your comment. Wish you all the best!

A když budeš chtít vrtat třeba ,,8"vrtákem,tak kde seženeš takovej NÝT?????

@creationholic101

6 ай бұрын

you can use Cable Tie

Mi sono iscritto perchè utile e geniale

@creationholic101

6 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

soy de cuba , saludos

@creationholic101

2 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

bột rắc để xịt keo 502 bột đó tên tiếng viẹt gọi là bột gì vậy bạn

@creationholic101

5 ай бұрын

backing soda

@nguyenthaicuong1959

5 ай бұрын

Bột đó mua ở đâu có bạn

@nguyenthaicuong1959

5 ай бұрын

Chai nước đó phải keo 502 kg bạn

Cómo está compuesto ese súper pegamento?

@creationholic101

2 ай бұрын

cyanoacrylate adhesive glue

@nguyenthaicuong1959 0 seconds ago powder to spray glue 502 What is the name of that powder in Vietnamese?

表紙の画像と、実際の使い方が、逆になって居るのは、どうしてでしょうか。

@creationholic101

5 ай бұрын

Thanks so much for watching our video. Wish you all the best

Hellow very nice ideas

@creationholic101

5 ай бұрын

Thank you so much 😊

what is that tool at1:34?

@creationholic101

25 күн бұрын

rivet gun

From Greece

@creationholic101

Ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Pop Nitne za L profil. Vezivanje žica je dobro i bravo. 🇷🇸👍🥁

@creationholic101

26 күн бұрын

Thank you! Cheers!

From Chennai, Bharat (Iandia)

@creationholic101

3 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

I wish I have known now.

@creationholic101

5 ай бұрын

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

❤❤❤❤

@creationholic101

Ай бұрын

Thank you! Cheers!

5:05

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Exelemtes ideas

@creationholic101

4 ай бұрын

Thank you! Cheers!

bạn quá lãng phí 1 chiếc đinh tán

@creationholic101

2 ай бұрын

Thank you for watching

very snice ideas

@creationholic101

5 ай бұрын

Glad you like them!

粉は重曹？

@creationholic101

3 ай бұрын

yes!

여기는 대한민국 전라북도 장수군 장계면 장무로 73세 남성입니다. ❤

@creationholic101

Ай бұрын

Thanks so much for watching our video. Wish you all the best

Louisiana

@creationholic101

Ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Jag kommer från Sverige vår huvudstaden heter Stockholm

@creationholic101

19 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Vaere good 👍

@creationholic101

5 ай бұрын

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

Boring thoughts because they are repeated dozens of times. Unfortunately, your only concern is the large number of videos and the large number of viewers, even at the expense of their time, with these repetitive, boring, and most of them stupid things.

@creationholic101

6 ай бұрын

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

France Aveyron

@creationholic101

3 ай бұрын

Thanks so much for watching our video. Wish you all the best

いろいろ参考になりますが、１２分過ぎ　　砥石が９０度向きが違いますね。、　 デモかもしれないですけど、世界中の人が見てるので、正しい向きを。 　砥石と包丁は平行にします。　直角に研ぐ人は居ないでしょう。　しかも、砥石の目が荒すぎ。荒目ではなく極細目で研ぎましょう。 アイデアは良いとおもいます。

@creationholic101

4 ай бұрын

Hello! thanks for your comment. Wish you all the best!

Mococa SP.

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

I saw 1 useful thing but I'm not going to tell you which one it was. The rest was pretty much useless.

@creationholic101

5 ай бұрын

Thank you for sharing your feedback and expressing your perspective

Hi ich komme aus Germany oder auch Deutschland genannt... :) PS cooles Video

@creationholic101

3 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

야!!!!!! 진작 이런 걸 알았으면 집구석 엉망으로 안 만들었을낀데..... ㅋ

@creationholic101

4 ай бұрын

😅😅😅Thanks so much for watching our video. Wish you all the best

25:25

@creationholic101

3 ай бұрын

Thanks so much for watching our video. Wish you all the best

Suer

@creationholic101

22 күн бұрын

Thank you for watching

Stefano era meglio se lo facevi da solo il video tanto da ciò che ha detto il creatore cosa che a me a sentirò è vederlo mi pare improbabile.comunq le do.ande fatte non ha dato una risposta nemmeno a una un ssluto😂

@creationholic101

5 ай бұрын

❗Please enable subtitles in your language 🙋🏼‍♀ Thanks for watching 😋🤗😘

Hello I come from France (Paris)

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

@jean-patmillouf

5 ай бұрын

@@creationholic101 hello, yes I like to watch your video. Thank you

＃29　何を何で溶いているのか材料不明

@creationholic101

Ай бұрын

Butyl axetat (CH3COOCH2CH2CH2CH3) and silicone

1- Stupid solution 2- Invest in a new device. Not necessary, you can screw it tight and you can easily remove it later on. Stupid The rest is perhaps as or more stupid solutions!

@creationholic101

5 ай бұрын

The goal of the video was to showcase a unique approach to recycling, but I understand that it may not resonate with everyone

use the tools right, rivets are not used with wood, you use wood screws... this video is full of bad ideas

@creationholic101

6 ай бұрын

Hello! thanks for your comment. Wish you all the best!

@mysygisun3335

5 ай бұрын

そうですね、全く使い方を見ていませんね。 只なぜ、表題のセットの仕方と、本当の使い方が、違って居るのでしょうか。 理由がわかりません。

lietuva

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

한국이오

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

耐久性には乏しいです。

@creationholic101

2 ай бұрын

Thank you for watching

Дикое убожество! Я такого мастера вьігнал бьі до начала ремонта.

@creationholic101

3 ай бұрын

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention