Take your personal data back with Incogni! Use code MATTLOWNE at the link below and get 60% off an annual plan: incogni.com/mattlowne

@TomTinTin279

14 күн бұрын

Didnt know you were a speedcuber? nice moyu 3x3 i think

@Sfsturtleyt

14 күн бұрын

​@@TomTinTin279 that cube is a.....cyclone boys 3×3!

@TomTinTin279

14 күн бұрын

Ahh cool, thought it was a moyu from its case

@harryroesser3916

14 күн бұрын

@mattlowne that watch that you have which one is it? I know it's a Samsung

@MattLowne

14 күн бұрын

@@TomTinTin279 Haha, keen eye! Yeah it's a Moyu Weilong WRM V9. I was super into cubing a few years ago and recently wanted to get back into it...turns out I've forgotten basically all the OLL and PLL algs so I'm back at an average of ~50 seconds. Gradually trying to improve my F2L and re-learning my OLLs and PLLs...decided for the headlights OLL I'm just gonna do Sune/Anti-Sune though because I remember *hating* that algorithm lol

Something about the throttle falling to either 100% or 0% thrust is just so perfectly kerbal

@eggbun

14 күн бұрын

Was about to say, it would've been better if the throttle could hold position but on second thought 0-100 is the kerbal way xD

@melodic9920

14 күн бұрын

For the price of the controller I shouldnt have to deal with kerbal jank, but its still really cool

@Benabik

14 күн бұрын

I wonder if there’s an adjustment screw somewhere to tighten the lever.

@maxm745

14 күн бұрын

@@melodic9920 He did say it was a "beta" part seemingly, so probably something that would be worked out before its actually available. But agree.

@michaelnovak6096

14 күн бұрын

I was about to head to the website and check this out but that throttle lever is a hard pass, there is the knob but not the same, once the throttle lever is fixed consider mine bought

Play a whole mission in real time with the inside veiw to get the true kerbal experience.

@batscove

14 күн бұрын

Wow that must've been challenging

@ulle85

14 күн бұрын

+hullcam

@JRexRegis

14 күн бұрын

You'd almost definitely need a mod like MAS and its Astrogator integration (to get proper orbits from within IVA) but this definitely seems possible.

@theencolony5595

13 күн бұрын

​@@JRexRegis actually, you can do very well on just IVA alone! a couple years back I did a Mun run in just IVA, as long as you keep track of the speeds required for each phase of the plan, you can do a landing and return without any extra info!

@paulhoffmann9746

13 күн бұрын

@@JRexRegis playing with it right now. without cams and MFDs, it is absolutely impossible to even dick in space

Imagine doing this without a monitor (or just using the map screen), relying on the telemetry only to get a very mission-controlesque experience.

@ftr98

12 күн бұрын

I think there is a mod "Control room" or something that gives you a control room as view. Combine that with smart things, or mech Jeb and you can basically program a complete automatic mission wich would be realistic

Thanks again, Matt! I'm happy to see these modules getting some love. Regarding your Throttle module slipping, unfortunately this has sometimes been the case as there's no way for me to tighten the lever. Newer models have a bit of fabric that helps support the lever, but it also isn't perfect and I'm actively looking at options. This probably isn't the best look on my part, but you could glue some foam next to the lever underneath the board to add friction and get it to stay where you leave it. Anyway, I'm looking forward to seeing you enjoy the controller in the future! I'll let you know when I figure out how to build and ship you the rest of the rocket.

@KSP_Aviation

14 күн бұрын

you could use a springy metal lever that pushes onto the bottom of the lever kinda like some RC controllers do it

@MrFaaaaaaaaaaaaaaaaa

14 күн бұрын

using a foam shim seems like a fine solution. maybe you could use a teflon strip or other self lubricating materials wedged into the slot for a long term solution

@Da-Real-Gigachad

14 күн бұрын

You might be able to add a low to high gear ratio that spins a small piece of paper at a high speed when moving the trottle. You might also be able to backfeed into an electric motor. Or just fill the entire panel with thick sirup. As for the staying in place problem: A fluid head type mechanism might work. Chat gpt is fun: To prevent a throttle lever from moving on its own, several mechanisms can be employed: 1. **Friction Lock**: This mechanism involves a friction pad that can be tightened against the throttle lever, increasing the resistance to movement. This is common in many throttle control systems, especially in boats and aircraft. 2. **Detents**: These are small notches or grooves in which a spring-loaded pin or ball bearing can sit, creating a tactile "click" at specific throttle positions. The detents provide resistance that helps keep the lever in place. 3. **Spring-Loaded Mechanisms**: Springs can be used to apply constant pressure against the movement of the throttle lever, requiring deliberate force to change its position. 4. **Throttle Lock**: A throttle lock mechanism, often found on motorcycles, can be engaged to hold the throttle in a fixed position. This is typically a mechanical clamp or a friction-based device that holds the throttle grip or lever. 5. **Ratchet Mechanism**: This involves a ratcheting system where the throttle lever can move freely in one direction (increasing throttle) but requires a deliberate action to decrease throttle, thus preventing unintended movement. 6. **Tension Adjusters**: These allow for the adjustment of the internal tension within the throttle mechanism, increasing or decreasing the force required to move the lever. 7. **Electronic Systems**: In modern vehicles, electronic throttle control systems can be programmed to maintain a set throttle position, preventing unintended movement through electronic feedback and control. Each of these mechanisms can be used alone or in combination to ensure that a throttle lever remains in the desired position and does not move unintentionally due to vibrations, gravity, or other forces.

@ultimate9056

14 күн бұрын

​@@JPJROBBO137true programmers would've programmed it in rust /s

@michalsimanek6988

14 күн бұрын

One among many solutions is to have the lever be symetrical (or have a counterweight on the other side) so the CoM is at the center so it doesn't rotate by itself. Also adding some slight friction would make it feel really nice i can imagine! I've seen people using a felt pad to create this effect, or just using slight detents so the throttle has a number of "stages" between which you click when adjusting the throttle. If you get the number of detents right, it won't even hamper the functionality of a analog control while providing a satisfying click and holding force. Just my ideas to throw in, they might be too overengineered for this maybe :D

5:41 kitty 🥹

@noahpilarski

14 күн бұрын

and 4:06

@godlugner5327

14 күн бұрын

Even nasa knows to release pictures of cats with their spacecraft

@quantumrandomness5114

14 күн бұрын

cats are the best!

@ButtonyFriend41

14 күн бұрын

Lil skrunkly

@R0bobb1e

13 күн бұрын

I scratched its chin just as it started to walk around the old housing! Accidental perfect timing!

If KSP2 dev is really over, maybe we should create an open source version, our own space program.

@UnhorsedGoose

14 күн бұрын

Community Space Program

@Sharpless2

13 күн бұрын

@@UnhorsedGoose Kommunity*

@dawsonsarcade7670

13 күн бұрын

I thought that gamers would of already learnt that this wouldn’t work with a large scale game after Thrive

@PlanetJeroen

13 күн бұрын

@dawsonsarcade7670 best source of copium remains gamers.

@trainzack

11 күн бұрын

Well, Open Space Program is actually a thing

Lmfao I know the throttle stick being too heavy is a design oversight but there's something so amazingly kerbal about having a thrust stick thats gagging for 100% thrust is hilariously on brand.

In Palpatine's voice : "Glue it!"

Cat: I was certain that box was for me to sit in. Outrageous.

better way to demonstrate this is to have a camera over the controller, and inserting that into the gameplay video in the corner or something. That way we can see the gameplay, and in the corner how you do it on the console.

@nurmr

11 күн бұрын

Yea, or put the controller video below the gameplay and end up with a not-wide-at-all 4/3ish aspect ratio

I've spent so much on stuff like this for flight sims over the last 40 years, it really does add a whole new level to using a simulator. These days I just don't seem to have the patients to pull it all out and set it all up, spend a few hours flying and then have to pack it all up when done.

Idea for the yellow module: 1) Kerbal Alarm Clock panel that shows you the countdowns for maneuvers set for other spacecraft (for when you fly multiple missions at once). 2) Target remote control panel that lets you send basic commands to a targeted spacecraft while docking (turn on/off RCS, switch between attitude hold modes, switch lights). This would be similar to the capabilities of Gemini 8 when remote controlling the Agena Target Vehicle Maybe you could also get hold of one of those original Apollo Mission Control switches (there's details on Curious Marcs channel) to switch on Chatterer of semi-realistic Kerbal CapCom functionality.

Now all you need is a mod to have map view on one monitor and IVA view on another.

@JRexRegis

14 күн бұрын

This would honestly be incredible.

@applesaregoodeatings

14 күн бұрын

@@JRexRegis i think that there is a way to do this. I recall an older channel called HOC gaming doing way back in the day. Pre-1.0 KSP

This is giving me some serious Steel Batallion vibes, if anyone remembers when that came out with it's massive controller.

@taylormurphy2551

14 күн бұрын

Loved that game, but I was terrible at it. Stole my friend's version for several years. Never made it past like mission 4? lol

We need him to make a full mission with this. IVA only, no map screen.

I want more controller content! That looks like a really professional and fun addition to the game.

OK, that cat has to be the cutest EVER!

I feel like a direct overhead camera would be nice for a 2D view. I always love playing KSP1 with my joystick, this kind of thing is a bit of a dream really

Matthew Lowne, you cannot just be showing us your adorable cat for short bursts at a time. I demand a cat tour/showcase!

throttle - two strips of rubber mounted on the back side of the white outer panel that rub against the bar of the throttle and hold it in place through simple friction

Can we get a KZread Short of you just flicking the NAV and MAP buttons please? They seem so satisfying 😄

I'm really excited about what kind of modules the community will create! I would love to see some hardware that you would find in actual planes, like real metal switches or buttons and lights, and panels that are maybe kinda grey like you would see in an airliner. A real physical navball, more telemetry screens, more lights, more buttons, just more everything.

This honestly is really cool, and something I never thought about as a controller. Thanks so much for showing us this awesomeness!

So cool! If you're using it for future episodes, I would recommend showing your view for the controls.

awesome vid, still in love with your abort switch and having to arm the stages but I love the addition of the fuel etc. display unit. this reassures me that whatever ksp 2's future you'll still be cranking out the vids on 1 or 2, Thanks again for the great content

4:05 kitt'n! Of the controller, I'm more than a little envious. :D I'd be making them if my health allowed, but I won't go on about it as I'm sure I said all that last time. Lately I've been getting some practice with low-level programming. It's been a lot of fun! The orbit numbers shown on the launchpad are familiar. I've seen those on the screen so many times. :) Orbital insertion with the telemetry screen had me grinning all over my face! :D It's just so cool! Familiar numbers again; I watch the maneuver panel almost as much as the navball, but similar to what you said, Matt, seeing them on dedicated hardware is so much more immersive! :D click click click click! :D Nice it supports KSP2 too, despite everything. Maybe the mod will be finished even if the game is cancelled. It depends on how the mod's developers feel. I get that feeling! :D I wish I could convey it too. Thanks for showing us, Matt!

Im so jealous 😅 this looks sick 😊

Happy to watch you caulk your unit together.

You should do a playthrough of campaign and only use first person camera inside the command module, using only the data you get from the onboard screen to maneuver and such

2:12 - Hi, do you think you could place that delicate electronic screen slightly closer to the edge of your table? My anxiety really isn't bad enough at the moment.

@tannagra

14 күн бұрын

I was waiting for it to go tumbling, I'll be honest.

@hadorstapa

14 күн бұрын

This is how we know for sure that Matt isn't Linus doing an English accent.

@MattLowne

14 күн бұрын

@@hadorstapa yes, it was an important distinction I needed to make because I was building it in a kitchen

@eekee6034

10 күн бұрын

I'm so glad I didn't notice! 🤣

Would absolutely love more controller videos!

Cleetus McFarland fans had their ears perk up at 0:35 🤣Congrats on the new build!

I love complicated and chonky control panels, it is the main reason I own a Steel Battalion controller and an Xbox (2001) I would love to have something like this for KSP

I was meaning to ask about this on the "until the bitter end" stream - great to see this having an update!

I definitely like the idea of seeing videos in this "new" layout, with the ultra wide recording, and the controller! The controller is dope asf

I’ve been excitedly waiting for this moment ever since you mentioned it

I love it when people make products and don’t drop ship. Also laser cutting it then sending it straight away and letting the customer assemble is so smart

@Codapop_KSP

7 күн бұрын

There's still a lot of prep that has to be done with each container, even though it arrives flat. I mostly just didn't really trust them to not get damaged in shipping. They're very solid once on the desk, but also quite heavy.

Amazing controller and awesome videos from your side!

absolutely love this! I think the way you overlaid the game on the upper right is just fine btw.

4:06 I’ve had to rewind this section about a dozen times because I CANNOT for the life of me pay attention to what you’re saying when you show me that cat

You could try a blind mission where you can’t see what’s happening outside the rocket, the only information you have is on the controller and the IVA nav ball / gauges

"...my hands on my unit". LOL.

yay coool looks soo awsome. love your videos. Maybe you build the star ship as a new video and try to land the bottom stage

you could use that as just an adjustment throttle and the legacy one as your main throttle. keep the new throttle at precision

Matt: This is so cool to have extra hardware to control things! All the insane hardcore Flight Simmers with too much disposable income: Welcome to the money pit.

you should use an overhead camera for the gameplay

That was a great video, now you need controller and face cameras, and a space helm so you can put your face up beside the Kerbals in the flight screen

Try wrapping rubber bands around your throttle where it meets the plastic base. The friction should help hold it in place.

Dude i love your videos, been following your channel from 1 1/2 years, Can you build the soviet N1 moon rocket in ksp

@MattLowne

14 күн бұрын

Did that with EDA a few years ago :) kzread.info/dash/bejne/laiD0dGjppTMeZM.htmlsi=esHbb327pQ8WO7HB

I would love to see a potential lets play with the controller

Bro this is sick 🔥🔥

I'd love to see you do a full blown multi part mission to somewhere like Duna or the Jool system with this rig!

Please more controller content i love seeing you use it

Very cool. If I played KSP2, or KSP more I'd be ordering today.

Finally, you can play RSS

Hope to add 10 or 12 control modules in my 2 man kerbal space simulator I'm currently building and video documenting

An Idea just popped into my Mind: if you get enough detailed information about your rockets position, course etc. you could make a blind flight. no picture/audio. just analizing the data and flying the rocket to the mun for example that would be the ultimate KSP Challenge :D

gotta be extreamely handy actually deploying multiple stages... i lost sooo many perfectly good spacecraft by hitting the wrong button, or designing in automatic failure from the start and having no options because i couldnt isolate the issue. and forced to rebuild entirely based on my own limitations instead of what i was trying to accomplish.

All right, works on both KSP games. I’m sold! 💰

Awesome video! I wish I had enough money to get a controller for myself

Nice caulk!

Would love to see you do a full IVA mission with this controller

HE DID IT AGAIN!!

i didnt know that this game was detailed that much

That is the cutest kitty i have ever seen ;_;

Awesome stuff! Next challenge: mun mission with instruments ONLY

This is very important: We need full and detailed information about the kitty.

I'd love to see a whole mission/series which relies on using this controller.

Adorable kitty-fuzz!

@Matt Lowne one of the favorite things I like to try and do is fly entire missions in the cockpit view and map views only. I play on both PS5 and PC... only wish the maneuver info would show on screen when in cockpit view for consoles. Lol. For now, I use watch timers 😂

Congratulations on the amazing controller!! Video idea: Turn off your monitor and do a mission on telemetry data alone 😎

That is so cool!

You should wear perhaps a webcam on a head band sort thing, like old mining helmet or a collar like device. You could capture you and use the console at the same time.

Not a fan of that flimsy throttle but the switches are real cool. Thinking of getting one with switches only to go with my flight stick and throttle setup.

Thx because, I see little content for sim controllers for KSP Greetings

You could add a screen for the nav ball, but you might need a more powerful microcontroller for colour. Better idea: add a little trackpad module so the user doesn't have to keep going back to the mouse. Anyway, it's a cool product, I would love to see how you communicate between the microcontroller and the PC. Do you use serial or mimic HID?

@Codapop_KSP

13 күн бұрын

Both actually! On newer units (like as of this video) users can choose between direct serial communication with the game or generic keyboard and joystick emulation. As an emulator it only functions as an output device, so things like the screen won't work, but at least it leaves the controls available for other games.

@zippy-boy8605

13 күн бұрын

@Codapop_KSP That's pretty cool, I didn't think of switching between the two. It's nice that it is not only locked into Ksp. I would love to see how it worked on Star Citizen.

@eekee6034

10 күн бұрын

I want a real nav ball, but it'd have to have the prograde, normal, etc. indicators and I don't know how to do them. I'm sure it's possible, I've seen weird stuff like that done before, surprisingly long ago, but I don't know how.

rad stuff

Man, you need to see if you can get to the moon blind with only the fpv from the cockpit and the controller displays!

Good to hear the controller now works with KSP2. I was delaying a purchase until this became a fact. But now I'm delaying even further until we hear what's next with KSP2, the colonies, etc.

Don’t spill whiskey on it!

yes, please, more controller content 🙏

Now get a TV for FULL IMMERSION 😂

you should really try getting a rocket into orbit with the screen turned off only relying on the telemetry readings

literal rocket science

Do i smell a video series with cockpit view only? (Outside of managing nav nodes of course) Your instrument panel might make that a lot more doable

its back!

I have an the parts to build mine, but was hoping ksp2 be closer to be finished and mods be out to support it.

this is so cool!!!!

Throttle lever needs a friction lock adjustment

@Codapop_KSP

13 күн бұрын

I'm going to work on options asap!

next you need a fully responsive, real-time, motorised nav ball!

imagine they release a navball module and you can fly with UI completely disabled

Perfect for ksp cuz we don't talk about ksp 2 anymore

Always a good day when Matt Lowne uploads. ✌️🐸👨

Do a full monitor view with a smaller screen showing the controller (kinda like a mouse cam) to show it in acrion.

A thin bit of adhesive felt (like for furniture feet) on the inside of the slot for the throttle could help hold it in place. Just needs some friction to overcome the weight of the lever.

@Codapop_KSP

13 күн бұрын

That's very similar to what I'm trying. The only problem is it's very touchy. Sometimes the material can prevent the throttle from maxing out or bottoming out.

You know what you need to do? Build a capsule, and then mount the screens and controllers in it.

you should see if theres a way to tighten the throttle lever so you don't have to hold it in place

I absolutely love your cat

I like the controller, very cool! I have a video request. Since the demise of KSP2, could you overview your favorite/must have mods for KSP1? I started playing KSP1 last year just before KSP2 came out, so have mainly been playing KSP2. Now, I am wanting to go back to KSP1.