The resivor on the top is for chain bar oil. Without oil the chain heats up and risks the bar seizing up. Cool video though

@TheJhonny5555

Жыл бұрын

You can see that there is some oil in it, and i dont think it comes with oil form package.

@rmora1

Жыл бұрын

Let him destroy it, It's why I watched till the end. No oil on chain is hilarious.

@collegehumour

Жыл бұрын

He added oil in the first video he did on this

@therickdarts180

Жыл бұрын

@@collegehumour chainsaws should be oiled before each cut, this means filled. that was extremely low on oil. I expected issues as well. Anyone one who has used a real chainsaw would. Also you can see @ 8:13 right before he says how hot it is that the reservoir is empty.

@Chris-nq6cm

Жыл бұрын

@@hayloft3834 its reserveer****

6:18 ...gave me a heart attack when you cut to the flash back at the exact moment your fingers touched the chain.

@jamesbizs

Жыл бұрын

Lol so I wasn’t the only one that recoiled by that totally dick move . I’m not even close to a safety nut. Safety third. But he kept touching the chain with his hand on the handle. Ugh.

@skylersample5356

Жыл бұрын

saame

Ok this is why I respect Tyler ( if your listening) He is very humble and not full of so much pride that he can't repeat a segment that was suggested in the comments. If he sees that people are saying no you should try it this way , he doesn't ignore them but instead he tries it again knowing that he might have messed up. That right there deserves respect and that is how it should be. Always stay humble.

@Eidolon1andOnly

Жыл бұрын

if *you're listening

@steveholland1163

Жыл бұрын

its hard to belive hes never seen that guard desgine its almore on ever grinder

Chainsaw bar oil not only lubricates, but also cools. The bar and the chain will expand at different rates; chain probably isn't even expanding at all.

The bar heats up and expands, but the chain doesn't, so it gets tighter. That's why you should always loosen your chain when you store it. If you don't, it can warp the bar as the bar continues stretching for a few minutes after use.

@jordanbeyer7607

Жыл бұрын

Wrong.

@MikesGarage96

Жыл бұрын

I live in the south, but I’ve heard stories from up in cold parts of Canada of crankshaft getting warped from the chain stored too tight in extreme cold temps

@chevobelomorkanal

Жыл бұрын

@@jordanbeyer7607 then explain mister

@RealityCheckVI

Жыл бұрын

Just adjust you chain when its cold 😊 if adjusted too tight when its hot (and not loosened after use) it propably could bend that bar.

@americansmark

Жыл бұрын

@@jordanbeyer7607 Not wrong. I've been servicing Stihl chainsaws for 10 years. I've seen enough broken and broken enough myself to know.

You just gave me a mini heart attack with that edit. You grab the chain then edit immediately to the grinder being on. I thought you lost your fingers for a second

@GAD00SH

Жыл бұрын

Lol got me too!

@harolddamron7279

Жыл бұрын

Same lol 😅

@shad0wdream

Жыл бұрын

My wife literally gasped beside me when he did that. I jumped. :P

@RP-dy5mu

Жыл бұрын

Bro same. I jumped as if it's a scary movie with a jumpscare.

@oxarplatt

Жыл бұрын

same.

Oh my goodness, you scare me to death touching that blade while holding the grinder with it still plugged up!

I literally closed my eyes every time he grabbed the chain with it still plugged in

I jumped so high at 06:17 because I thought it turned on while he was touching the chain 😅💀💀

@jamesortega2340

Жыл бұрын

Same here. I felt so uneasy every time he touched the chain

@-Jethro-

Жыл бұрын

Came here to say the same. The adrenaline is still flowing. I wonder if he put that jump cut in there on purpose.

@rhamrick86

Жыл бұрын

@@-Jethro- more than likely lol

@johnkaminski646

Жыл бұрын

My finger started to tingle.

Realtalk.. Im always excited to watch immediately tylers new upload... Even sometimes he ruin the gadget but still entertaining 😂

@byallmeansneccasary6884

Жыл бұрын

Seriously though me too 😂🎉

I am glad you are so much more happy about it. It is always nice when things work the way they are supposed to.

The sequel we all needed

@Floofie_boi

Жыл бұрын

Yo, I like your pfp.

@fluxyhusky

Жыл бұрын

​@@Floofie_boiayeee thx ^^

@Floofie_boi

Жыл бұрын

@@fluxyhusky you're very much welcome. :3

@RG-gk4yi

Жыл бұрын

Did the first video disappear?

@Floofie_boi

Жыл бұрын

@@RG-gk4yi If you're wondering where the first video is, it is on his main channel.

The way you kept pulling the chain with it still plugged in and your hand by the trigger gave me anxiety

I don't know if you will see this or not Tyler, but if you do, the reason you chain got tighter at the start was from you bar moving up so hold the tip of your bar up when setting chain tension, if you don't when you cut it will push the bar up and the chain will go tight.

I don't know why but that sneeze shot cracked me up. 😂

I love this channel - not only because Tyler appears to be a great guy - but also the suspense and dread every time he picks up a sharp object 🤣

I hope we see a return of this in future videos if anything needs a quick cut. Such an odd concept, but with the right grinder, a wonderful execution.

More of these videos bro I want you to do deep dives on the weird stuff you've brushed past previously. Maybe even real life reviews like going camping and taking a bunch of products to see how well you do in the wild with this stuff!

6:16 Holy crap Tyler, that edit startled the crap out of me.. You've got your finger on the chain and then loud saw sound vid cut.. 🤣🤣

Tyler have you checked to see if it needs oil or something to prevent overheating and to prevent the chain from falling off

Tyler continually grabbing at the chain while the grinder is plugged in, and he's holding it in his other hand.

Love that not only does Tyler or editor read comments, but follows up with them. There is some good info on chainsaws in the comments and I expect nothing less than to see the ongoing series. What won't our grindersaw cut?

Hoping to see this become a trilogy, then be like a franchise where you Oh it's Halloween let's use it to carve the pumpkin 🎃, oh time to take down the Christmas 🎄, let's pull the saw out again.

@liloreoinya

Жыл бұрын

We love a series.

I've never been more scared for someone's life while watching a review for a tool. 😂

Everyone has already mentioned this, but you need to oil the chain with the reservoir (and chainsaw oil). The reason it gets tighter is because everything expands when it's hot.

Put some bar oil in the reservoir it will work much better

Thank you for listening to your views. Much Respect man. You have enlightened my KZread experience with all your content.

Beautiful. It really seems like that attachment was built for that Bauer grinder.

The lack of a chain break is constantly making me nervous

@dorothyjenson8181

Жыл бұрын

Along with every ER in the area

You definitely have the best fans. You freaking rock dude

always nice to see him revisit stuff and if it works correctly he likes the item

Participation award goes to Tyler. Everyone’s a winner

So happy you revisted this, thanks!

Very good follow up! That thing is cool as hell

I'm blown away there were THAT MANY PEOPLE who actually bought this to be able to mass-school Tyler on what to do etc 🤣

4:06 *bless you* i hate when i have to sneeze while running a saw.

How funny would it be if you found a high quality one and it ended up working with the Milwaukee with no issues lol

Say “rock hard” one more time Tyler 😂

I've had one in my saved for later cart lmao thanks for your video I'm ordering it now

I get goosebumps every time you touch the saw chain without unplugging the angle grinder. I kept thinking when is he going to lose his fingers :S. but good video

It's honorable that you read the comments and listen to your viewers ideas. I commend you for that Tyler.👏👏👏

Honestly for a part time DIYer I can see this thing being pretty useful

Yeah lets take two fairly dangerous power tools and stick them together whilst removing all previous safety features! That checks out!

@themightycrixus1131

Жыл бұрын

Exactly what I was thinking haha

8:51 At that point, just get a Cordless Electric Chainsaw that uses the same battery as your other tools, you can get really good ones for like $120.

@shaneh7519

Жыл бұрын

Exactly. I already had the 40v batteries for my ryobi mower, so I just got the chainsaw that uses the same batteries

@themightycrixus1131

Жыл бұрын

Battery powered chainsaws are great on paper but when you really have to do some cutting gas is the way to go in my experience. I did tree work for 7 years.

@WDMurphy

Жыл бұрын

​@@themightycrixus1131 You're right but battery chainsaws are great for pruning, small work, and way better than this item. My comment is more to him saying if he could "get a high quality of this" at that point one should get a real chainsaw, battery one, or even a corded one. His "liking" the product is to save on buying/reducing cost of multiple tools. Like you said you would not use a battery for actual tree work, well you would not use this tool either.

My lord unplug it before playing around with the chain! Thanks for the honest revisit

“It’s like it was made for it” That because it was Tyler.

Dude at 6:17 you editing made me jump, i literally thought that thing started when you where holding the chain

You wanna tighten the chain just enough to where it holds itself in to the bar. That’s what I’ve done with my chainsaw. That may be different. Either way that Bauer grinder is nice too. I’ve had one for over a year and still going strong.

To eliminate overheating, you'll need to put some bar oil on the saw bar every so often. Other than that, looks awesome! 👍🤘

Try putting bigger bars on it. See how big of a log it can cut.

@escapetherace1943

Жыл бұрын

@@dynevor6327 why? Absolutely useless. Everyone's cutting pine/spruce or maple or w.e

@escapetherace1943

Жыл бұрын

@@dynevor6327 you don't cut wood kid

@escapetherace1943

Жыл бұрын

@@dynevor6327 I don't split wood after it's seasoned 😂, usa is real lumber chainsawland

Back when I was remodeling houses sure could have used this. The electric chain saw that I used was too big a lot of times.

Worked at hf for 2 years. Honestly they’ve got a decent amount of good stuff. But I have learned which items to never ever buy lol. Lots of battery chargers came back, obviously the cheap cheap power tools. Hand tools,generators, and engines seemed solid for the most part

Tyler has the mechanical aptitude of a ferret that got into his uncle's medicinal gummy stash.

Wow, that thing is crazy dangerous. You'd have no control of kickback especially if it started to loosen up.

The chain got hot that's why it got loose metal expands when it gets hot you probably need to put some oil on that chain I doubt that thing has self-moving borrow on it so you should probably put some bar oil on it that's why it's getting hot

This guy perfectly fits the look of someone who enjoys 'Grindr' 😂

That thing just has to be part of the Darwin award selection process.

Literally every time Tyler said literally I literally had the thought to count how many times he says literally that would literally be literal

It is awesome that he reads the comments Satisfies my stupid "what ifs"

"if you want a chainsaw don't buy a grinder chainsaw just buy a chainsaw" lol

Looking forward to the third part of this trilogy

Is it just me or did everyone else close there eyes when he kept touching the chain wile the power still on 😂😂

Not too keen on him touching the chain whilst it's still plugged in!

Some grinders, the part the button is on can swivel. It’ll probably make it a bit more comfortable to use instead of a button on the side.

I have that exact grinder. It’s great

A wodensday Tyler video? Sweet.

My saws do that. Also you never want to tighten the chain when it's hot. Let it cool down then tighten. I've seen where someone tightened the chain when it's hot and when it cooled down it am sometimes warp the crank and damage the clutch drum and bearings

I always enjoy your videos

We have a bolens weed eater at lowes and it has a bunch of attachments that can go on it. And some other ones that go on other but most stuff fits on bolens. I’m in Louisiana but maybe you have the same stuff.

9:13 Tyler invents the cordless electric chainsaw. 😂

@mitchellmorrison4233

Жыл бұрын

it has a cord. the grinder has a cord.

@-Jethro-

Жыл бұрын

@@mitchellmorrison4233 I was referring to what he says at the end.

My favorite goober lmao

I need to look at my cordless Milwaukee grinder and see if it will fit and I may pick one up

That style clamp on the Harbor Freight grinder is called a V-band style clamp

My guess as to why it’s slower at cutting now than before is just that the Bauer grinder doesn’t get up to as high of rpm’s as the Milwaukee or that the torque is different between the two. Either way love the video and update 👍

@thatguybrody4819

Жыл бұрын

if i'm not mistaken it's a bit of both but more the torque. Project Farm is your friend when it comes to testing brands and their products about as fairly as you can.

As a Milwaukee guy I can also say that I had no idea grinders were made different than Milwaukee

The chainsaw chain *should * get looser as you use it thanks to thermal expansion... Getting tighter has to be unique to how this thing works lol

if you do get a cordless version show us thee video of it please.

Amazing you still have all your fingers

That would work awesome on sculptures😮😮😮

Absolutely rock solid. Thats what she said..

Am I the only one that jumped when he touched the chain and then the flashback started? I thought for a split-second he started it while touching the chain.

Harbour freight has some decent power tools... I got a Cordes "sawzall" years ago, abuse it leaving it outside over winter, and it still works. Edit. Cuts 6 inch logs with a pruning blade great. Does about everything I would use a chainsaw for.

Whats happening is the tightening system on it is cheapish so even though its "tighten" down, the jerk of the chain will still move the bar so it will tighten on the push cut and loosen on the pull cut. Normally jerky or hard cutting will cause it and cutting something dry like a dried 4x4 can do that.

Whoo hoo! Another round!

I bought a older version of the saw it worked great

I am actually buying one now. I don't need an actual chainsaw, I just need to cut firewood into smaller pieces for my backyard pit just a few times a year. I already have a harbor freight warrior grinder I bought to grind ONE bolt last year. This would be perfect for my application and put a grinder to use that's otherwise collecting dust. Even the cheapest chainsaws on amazon are 100+ bucks.

dont worries about it, every trady should know that ever tool can be different...

My favorite minecraft youtube chanel

Comments: don't use Milwaukee Tyler: buys off brand Milwaukee

I’m a huge fan tyler

@blueash01

Жыл бұрын

😂

Another perfect example of what we are all told frequently when we are young! Apparently nothing is impossible who would have thought 😂

I always like when you revisit stuff based on the comments 👍

It’s “literally” dude!!!!” For sure “literally dude!!” “Lliterally” rock solid dude!!!! Totally and “literally” solid dude!!!! This chain saw attachment is soooooo “literally!!!!!”.

I thought I was watching an old Dave Sparks video for a second. Before he became HeavyD.

Moreeee 😂

Looks like chyna junk works with chyna junk!! I always love your vids Tyler:) Thank you!!

5:44 pulling on the chain while it's still plugged in.... Tyler isn't going to have fingers forever

autism awareness is a real thing. I love the fact that youtube helps those special needs content creators. thank you youtube!

Um harbor freight sells a corded chainsaw that is just less than $50 all day. Half decent, and has bar oil to lube the chain... YOU NEED TO DO A STRESS TEST!!! I CHALLENGE YOU TYLER AS ANOTHER FELLOW TYLER. ANGLE SAW VS CHAINSAW. CORDED POSSIBLY CORDLESS (if you wanna fully test the subject) 😂

4:05 - Bless you.