Well done Gary, I recently purchased an FLC120 I will have to try this on... Thanks for sharing! Rob

@cabovergary

2 жыл бұрын

Thanks for watching. Love a classic!

Good result. Your truck looks really well cared for.

@cabovergary

2 жыл бұрын

Thanks. I try hard to keep it up

Man on my 96 fld those lights never worked and on my 97 classic same thing lol im doing the same thing you did with my 97 this weekend finally

@cabovergary

Ай бұрын

Yea I never seen a truck that they worked on. Nice. I loved it when I did mine

That was a nice fix. I'd say the results were worth the effort.

@cabovergary

2 жыл бұрын

Thanks. I’m pretty happy with the results.

Great job, I like the outcome 😊

@cabovergary

Жыл бұрын

Thanks. I really enjoy them now.

LIKE YOUR CABOVER AND THE WAY YOU TAKES CARE OF IT.

@cabovergary

2 жыл бұрын

Thanks! It’s kinda my baby!

Thanks for the video! ive always wanted to do this but didnt know how to. sooner or later im going to attempt to do the same thing in my t600

@cabovergary

Жыл бұрын

No problem. Thanks for watching and hope it helps.

Looks good 👍

@cabovergary

2 ай бұрын

Thanks

Ive been wanting to do this but didnt know how it would look. looks awsome!!!!!! thanks for the video

@cabovergary

11 ай бұрын

Thanks! I really like it. One thing I would do in the future is to paint the back of it to keep light from coming out. I went back and did this couple months latter.

@christopherwynkoop9059

11 ай бұрын

@@cabovergary did you power the strip directly to the trucks marker light toggle or did you have to use some kind of inline power converter in between

Great video. That is a well taken care of truck!! Great work

@cabovergary

Жыл бұрын

Thanks, I have allot of pride in her. Thanks for watching and commenting

From this simple video, you've gained a new sub.

@cabovergary

2 жыл бұрын

Thanks! I hope you enjoy

Looking good

@cabovergary

3 ай бұрын

Thanks

Gary that looks awesome, I’m going to steel that idea from you some day! But different color!

@cabovergary

Жыл бұрын

Thanks! I really like it. I think next time I would paint the back of it after to keep light from bleeding though. Thanks for watching and commenting

Thanks for sharing! I’ll be doing that to both of my Freightliner Flc120’s as one don’t work and the other is very dim.

@cabovergary

2 жыл бұрын

Thanks for watching! You will love being able to see them agin!

Awesome idea. 🤟 I'm doing this to my classic tomorrow. I've melted 2 octopuses..lol

@cabovergary

Жыл бұрын

That’s cool to hear. Something I went back and did is a couple coats of black paint over the top of the hot glue. It had light bleeding though. Thanks for watching and commenting

Awesome buddy. Mines are crap too😂

@cabovergary

2 жыл бұрын

I like what you been doing with your truck. It so weird to see the steering wheel on the other side. Thanks for watching

@the7tongardengnome

2 жыл бұрын

@@cabovergary Thanks buddy. I have to keep remembering to flip some of my shots to the right side on the editor but sometimes I forget🤣

Do the FLD’s and the Classic’s interchange on some of those dash parts do you know? I have had a heck of a time trying to find dash parts for my 92 cabover. Thanks and awesome rig!

@cabovergary

Жыл бұрын

To my knowledge the upper dash is the same except on a cab over you have a added section in the middle to make it wider. I also believe the side with the hvac setup is the same but could be wrong. To me this is what makes the freightliner better to own in there old age because most fld parts interchange. Like doors and dash. Thanks for watching and commentjng.

Looks Awesome. Question. How did you cut up the strips and wire them in? Like how did you attach all the wiring to the individual strips? And any tips on cutting them? Thanks

@cabovergary

3 ай бұрын

So, the lights have marks where it can be cut, and you just use sissors. Then you can clean the rubber coating off and soldier to the copper on them. They are marked positive and negative. It is on the finer side of soldier. And after I posted this I would suggest using black glue sticks which can be ordered on Amazon or paint the back to keep the light from shining though the back. Thanks for watching and commenting.

@cabovergary at 2:19 that oem fiber optic connection. I got a spare I'm trying with. Questions: How did you wire the new light strips to that connection? Where did you purchase your light strips? It's holliday season and all I'm getting back in my search are green Christmas lights! Thanks in advance

@cabovergary

Жыл бұрын

Hello, so I cut the fiber optic deal out and used the power from that light bulb to power the lights. So, if I type 12v led strip they pop up for me. I dunno if that helps. I also would paint the back of the glue with some black paint. Couple coats because I am getting some light come up from behind the dash. Thanks for watching.

It came out very nice we’re do you get that tape light ?

@cabovergary

Жыл бұрын

Thanks, I got it off Amazon. Just make sure it’s the 12volt one. Thanks for watching and commenting

Random question, you ever had to replace the electric sensor for the tachometer or speedometer before?

@cabovergary

6 ай бұрын

I haven’t. They both worked no issue. Some of the other gauges whereby working and I replaced all but the speedo and tach with vdo vision gauges

@LifewithJames

6 ай бұрын

@@cabovergary Sadly mine didn’t work and I checked over and the sensor for the tach was super loose and I tightened it but it doesn’t function properly and someone snapped one of the studs off from my speedometer sensor so it’s definitely needing replacement. I’ve watched some videos on replacing them but nobody says how far to thread them in. I’m assuming until they bottom out then back them off slightly and tighten the jam nut.

Where did you take your truck to get your interior done at

@cabovergary

Жыл бұрын

I’ve done it all my self. It used to be blue. I think there some videos about a year back when I got a over head console out of a junkyard and pulled my whole interior and re did it. Thanks for watching

Yo where the relay for them flashers my fld120 interior dash looks exactly like....except yours look fresh buy layout looks exactly the same

@cabovergary

10 ай бұрын

Yea the fld should be the same. I took the panels off and steamed the old vinyl off and put new on. Hardest part was the disassembly and the re assembly. Thanks for watching and commenting

Good job bro,, and where do you buy this LED light?

@cabovergary

Жыл бұрын

Thanks! I got it off Amazon. Just type in led strip light. Just make sure it’s 12 volt. Thanks for watching and commenting.

@fernandofernandez975

Жыл бұрын

@@cabovergaryoh ok buddy, do youbhave the link for this? Thank u in advance 👌🙏🙏

What’s that light strip is called and from where you bought it

@cabovergary

9 ай бұрын

I bought of Amazon and it is a 12v led light tape. Thanks for watching

Where did you get those switches?

@cabovergary

Жыл бұрын

I’m pretty sure I amazoned them but can’t remember for sure. Been several years.

where did you get the wood grain dash pieces

@cabovergary

Жыл бұрын

So, I took the factory pieces off and steamed the original vinyl off and then ordered some new vinyl off Amazon and recovered them. I was going for a lighter interior because felt truck was to dark inside. Thanks for watching and commenting n

Is there a different name for the fiber-optic system because when I look it up I don't see nothing about it on the internet. I need a new one for a 1995 fld

@cabovergary

10 ай бұрын

I don't know what freighliner called the fiber optic deal. what I did was take it out and just used led tape light. just make sure there 12 volt thanks

@phillipchavez3705

10 ай бұрын

@@cabovergary 10 4 good video I found it! I

Where did you buy the knobs for the parking brakes?

@cabovergary

6 ай бұрын

Off eBay but I make the labels on my vinyl cutter. They were just chrome blank when I got them. Thanks

@anthonygonzales2686

6 ай бұрын

I have a Freightliner classic with the 3 knobs like that I ordered some but the blue one seems to be bigger and I can’t find one for it

@cabovergary

6 ай бұрын

If you order the ones that take the bubble sticker on it you can peel it off and have any sign shop make you labels for them.

@anthonygonzales2686

6 ай бұрын

I guess what I should of asked is if your shafts are all the same size where the knob sits or is the blue one thicker then the red and yellow one or are all three the same size shaft

Mine is backlit

@rrandykey

2 жыл бұрын

I added a led bulb to that optic

@cabovergary

2 жыл бұрын

It lights up good? Mine didn’t. I think my fiber optics were damaged though.

@rrandykey

2 жыл бұрын

@@cabovergary i can read them

@rrandykey

2 жыл бұрын

@@cabovergary i seen u the other day

𝚙𝚛𝚘𝚖𝚘𝚜𝚖 ❣️

@cabovergary

2 жыл бұрын

Thanks for watching