The scale might have some magnetic pieces inside of it behind the plate, which could cause the cube to get attracted towards the scale, skewing the results. But honestly that cube is quite absurd and I love it.

@GDBlueCat

6 ай бұрын

its just the top thats magnetic so it doesn't matter much if at all

@AbhijitK13

6 ай бұрын

nope, that doesnt matter, draw a free body diagram (that consists of all the forces acting on all the bodies) and youll see why

@ttmfndng201

6 ай бұрын

@@AbhijitK13 they're not talking about the scale itself being made of metal, but about possible metal parts below the scale, which would definitely generate a downward force that makes the cube seem heavier than it actually is

@Z3Cubing

6 ай бұрын

I double checked with the cube offset from the scale, and the original reading was spot on!

@AbhijitK13

6 ай бұрын

​@@ttmfndng201ahh you're right, that would add weight

the cube is just lagging

Solving that cube looked like watching a stop motion video

next gan cube be like

@gallium-gonzollium

6 ай бұрын

55440 combinations of magnets!

@F3MB01_T0AD

3 ай бұрын

For real bro

@AQSAWDAY

Ай бұрын

⁠@@gallium-gonzolliumand than next gen 99999999999999999999999999 combination of magnets

@Saifullah_4112

Ай бұрын

Average maglev fan: Average Maglev enjoyer: Z3

You could fill up the extra space with tungsten and tighten the cube as much as possible for a lot of friction

@microsoftrock

6 ай бұрын

8:08

@wakacow6647

5 ай бұрын

He only wants the magnetic click

It looks like a Laggy rubix cube

I'm not watching much cubing content these days but Z3 makes some of the more interesting videos on cubing. Thank you

@hugomallory875

6 ай бұрын

I quit cause j perm hasn’t uploaded in 9 years

@actuallyarbitrary4444

5 ай бұрын

@@hugomallory875🤨

To make a cube with even stronger magnets, you could use one of the upscaled cubes (I used a qiyi 9cm, but I also recommend the new meilong 9cm), and there's a lot more space for even more magnets.

@Icuantes_Pessinaldo_di_Suii

6 ай бұрын

Z3cubing better do this

@Icuantes_Pessinaldo_di_Suii

6 ай бұрын

I think with the extra room,he can fit more magnets into the center piece to attract to the edge piece like in the Valk elite m

@microsoftrock

6 ай бұрын

Broo

I really like the way youre making your videos, straight to the point, great explanation, great talking, no unnecessary information, I really enjoy watching!

@geekywhiteguy

4 ай бұрын

fr

You should’ve tried M moves for the last U perm. I really wanted to see how insanely difficult M moves would be to execute as the magnetic strength would be twice as strong as the outer layers.

@Z3Cubing

6 ай бұрын

Can confirm; M moves are very hard. xD

@skibidixLit

6 ай бұрын

​@@Z3Cubingwhat is the cube? I have it I know it's QiYi I want a full name like QiYi 3x3 MagLev, etc

@Liam.2000

5 ай бұрын

@@skibidixLit if you have it why don’t you know what it’s called

@galoomba5559

5 ай бұрын

@@skibidixLit he says at 0:52 that it's a QiYi Sail W

Besides the positively crazy creative ideas and very impressive challanges I also absolutely love the narration. I think I need a t-shirt with something along the lines of "Go away or I'll use my Terrifying Brick of Magnets!"

Turning looks like a early Rubik's brand cube.

I am so loving your experiences and ideas !

I did try to magnetize my SpeedCube with the Magnets that I can buy at the store (Diameter 6mm, Thickness 2.5mm) And When I tried to turn it after magnetizing, I felt they were stronger than I thoght. Before watching this video, I thought I had put the strongest magnets that I can think of, But after watching this video, I realized that he used a much, much stronger one. And now I know that he made the strongest magnets in a Rubik's Cube. Keep up the good work, Z3Cubing!

I also feel that middle position in my unmodified magnetic speedcube. It's weak and it doesn't impact solving in any way, but I do slightly feel it

THE LEGENDARY U1/2 HAS BEEN BORN

Looks like an exercise cube 🏋️ The 45° angle would definitely be interesting in a mixup cube...

Imagine walking by, with earring in, and a rubix cube comes flying out of no where at you.

@blucat4

26 күн бұрын

😂😂

That 45 degree click makes me need this as a cutter cube.

Imagine how hard a slice move would be on that!

@azim_azcuber7263

6 ай бұрын

Level : impossible

Love this, magnets are fun. I am surprised the superglue holds them in place.

You are honestly the most hard working cubing tuber i have ever seen. I have been watching your stuff since way way way back when.

Those magnets have separation anxiety 😂

Him solving the cube felt like i was watching 15 frames per sec motion picture

Throw it at a fridge

@nathy1918

6 ай бұрын

😂😂

@Aciscool2

6 ай бұрын

😂

@shmollege

Ай бұрын

Very good idea (sarcasm)

It would be awesome if you done the strongest maglev ball core cube. It would be like a maglev train inside a cube.

Now make a fused cube by the heaviest and strongest magnets cubes

Great video as always

next we NEED 4x4 strongest magnetic cube!!

The fact that no one brought up the v-cube 6 is crazy

"Keep away from metal" Proceeds to put it near phone and weighing scale

z3 cubing actually makes useful videos

yo the fast algorithm you used in the begining is great for testing a cube out you should make a tutorial for it!🤩

FINALLY Z3cubing uploaded! So excited to watch it

@Z3Cubing

6 ай бұрын

Just every single week for the last 9 years! :P

@Elytraz17

2 ай бұрын

@@Z3Cubing that's older than me XD

cubing technology has gone full circle, we're back to wrist turning haha

It looks like your cube is lagging.

That is really heavy! 355 grams? That has to be one of your most painful videos, z3cubing!

Great Job man! You know how you said that you wanted to combine the tungsten and the magnets well what if you did! and again great job!

Did someone though about making an impossible cube were every magnets are repelling one another, it would be such a tedious task to just make a move as nothing would want to stay aligned. Quite hilarious, but definitely interesting in terms of speed hard cubing

This is a perfect cube to show algorithms to a newbie cuber due the slow movement

that cube is at a superposition between rough and smooth turning

Z3CUBING IS BACK!!!!!

You should make a cube turn diagonally

wow this vid was awesome! btw alex, i heard you just went to big comp, and i'm just wondering if you made a vlog on it?

Remember when you made that cube that could complete 50 turns in one flick? I wonder if you could get that number even higher by reversing the magnets in this cube and making them repel each other at both 0 and 45 degree turns.

Can you get tungsten powder? Because that might be the best way to fill it and make it both the heaviest cube and the hardest to turn that still works. Also, you should weight it on the scale sitting on top of a brick or something else thick enough to keep the magnetism away from the scale because it could be affecting the copper circuitry of the electronics in the scale and causing it to misread the actual weight. Possibly a sturdy cardboard box could work, but either way, remember to use tare before setting the cube on top.

@Z3Cubing

6 ай бұрын

I double-checked with the cube offset from the scale, and the original weight was spot on!

that was a pretty crazy idea to do, but was fun to watch ))))))

Awesome video keep of the good work!

@nerf7778

6 ай бұрын

bro you didn't even watch the video it came out 4 min ago and you already commented

@Cute.buttough

6 ай бұрын

😂

You should do this with MagLev and magnetic core as well.

@jjsanimations

5 ай бұрын

I just imagine the maglev exploding lol

When ever you turn the cube in algorithms it looks like it is on 10 fps

Just What I've Been Looking For!

THIS IS SO COOOOL

When he was solving the cube, it looked like a stop motion animation from a cartoon

Waiting for the magnetized tungsten cube.

The sound is satisfying

U literally solved that modified cube faster than I can solve a regular cube

When you were solving the cube it reminded me of a stop motion animation

Imagine pulling up to a comp and giving this to the scrambler

You should do this on the cube that you can shape shift half way in the turn (the 3x3 with larger edge pieces idk what it’s called)

I think we all want that cube now

Imagine how strong your hands would be if you would train speedcubing on this cube and got time under 20 seconds and one day showing on the tournaments with this cube impressing everyone

i remember watching you when i was like 9, just found your channel

i wonder if you didnt use the middle edge magnet if it would behave more naturally or more poppy with the corners attracting

Cubehead AND z3 uploading at the same time?!?!

You should take the core out and make it only held together by the magnet strength!

Can you make a maglev 4x4? Imagine the slice moves 😮

if the cubicle made a z3 cubing cube, they have to do one of the mods he did on a cube

The double click gives a crazy low framerate effect

My friend: bro, i need stronger magnet in my speedcube! Me: say no more

Bro lagging IRL💀

"hey man what cube are you using?" "the electronic evaporator"

I feel like you did a voice over But when you pulled the magnets apart i like to think you were just trying to add emphasis on how strong they were 😂

damn, that solve was like stop-motion video

“How much Ping does Your cube have?“ “Yes“

i wonder if you could make a rubiks cube out of a solid magnet, like: you take a solid cube that is a magnet, and turn it into a rubiks cube

Z3cubing realy likes "the worlds..."

Wow, that must have been so much work. How'd you do that?

He’s back!

I gotta see some M moves and Slice moves on that bad boy

make velcro cube; orange, white, and green is the velcro part and red, blue, and yellow is the fuzzy part.

Could buy the Diansheng 10cm cube next time!

Everytime he does a cube modification, we know it will be a Qiyi Sail W.

@Z3Cubing

6 ай бұрын

Cheap + blocky = great for modding!

bros gonna put a particle accelerator in a cube oneday

Is this the cube they use to train their hands for greater finger strength, turning power, and speed? 😮

Yessir new video

2:33 when i was setting up a maglev wrm 2021 i was putting the parts of the centers into a bowl thing and when i put the 2nd magnet in the 2 magnets attracted together and the force of attraction broke them both so kids dont do it

can you put magnets on V-cube?

Next up, a cube on fire. And one that oozes slime. P.s. watching that made my fingers hurt 😂

you should try to remove the center and see if you can make a custom void cube

We need him to stuff the entire cube with magnets

This would be a really fun toy to have. I wish I could buy it off you

I feel like the 45 degree lock would possibly be useful for a scub

5:46 THAT THING HAS 2.5 KILOGRAMS + OF MAGNETIC FORCE??!!!!?!?!?!??!?!?!??!!?

Unless it's unusually strong plastic, that thing is going to tear itself apart some day.

the middle clicks make it look like it’s laggier

Casual OH practice cube

The 45 degree step is giving V-Cube vibes

This is THE supreme fridge Magnet lol

Now we just need a Tungsten-Neodymium alloy or some other magnetic metal and then we really could have a heavy cube.

When he turns the cube it kind of looks like it’s running at 2 fps.