I Put The Most Popular Turbo In My 7.3L Powerstroke
To get your truck in early to my new shop (PSC Automotive) just call our number: (210)385-8153
Stage 2 KC turbo 7.3L powerstroke: kcturbos.com/6b945
Merch: powerstrokecentralstore.com/p...
Today in this Powerstroke Central video I installed a rowdy stage 2 dual ball bearing turbo from KC turbos. this turbo is gonna help my truck spool up quicker and even out the 180/30 injectors. if you want to get this exact turbo you can in the link above also we can install the turbo for you at my new shop PSC Automotive
Buy my 6.0 Powerstroke mods:
Ruff stuff specialties: www.ruffstuffspecialties.com/...
Warren Diesel Shop Transmissions: www.warrendieselshop.com/
KC Turbos intercooler: kcturbos.com/6206b
Nightshift Diesel HPOP thumper 2: nightshiftdiesel.com/thumper-...
Odawg intake Manifold: kcturbos.com/130e3
Diesel power products fass fuel pump: www.dieselpowerproducts.com/s...
KC turbos jet fire s3r turbo: kcturbos.com/50e14
The Diesel Dudes 6.0L Powerstroke tuning and turbo back: (at the bottom of description) thedieseldudes.com/products/f...
Bullet antenna: www.dirtydieselcustom.ca/prod...
Coolant cap: www.dirtydieselcustom.ca/prod...
upgraded Water pump: kcturbos.com/9e605
Spe Lab Intercooler pipes for 6.0L powerstroke: bit.ly/Spelab-Powerstroke-Int...
spe lab cold air intake: www.spelabautoparts.com/produ...\
Warren Diesel Injectors: kcturbos.com/43d48
Get the front bumper here: bumpersthatdeliver.com/new-bl...
SPE Lab coolant reservoir: bit.ly/Coolant-Expansion-Tank
Buy my OBS 7.3L Powerstroke mods here:
Stage 2 KC turbo 7.3L powerstroke: kcturbos.com/6b945
Night Shift Diesel 5 inch turbo back: nightshiftdiesel.com/7-3-obs-...
Hydra Chip: nightshiftdiesel.com/7-3-hydr...
180/30 injectors: shop.fullforcediesel.com/obs-...
Want my exact mods on my 6.7L Powerstroke? Buy here:
Diesel dudes delete thedieseldudes.com/products/f...
Leveling kit: amzn.to/3RWUAHQ
Want My Exact Mods on my NBS 7.3L powerstroke ? Buy Here:
Ford emblem: amzn.to/42f1Pwy
front grill : amzn.to/3nnJJcL
headlights: amzn.to/40GDsqD
sinister diesel intercooler tubes : amzn.to/3K9Aoho
Buy the turtle wax tire shine here: amzn.to/3Zb74vi
Truck bed spray liner: amzn.to/3iJEkKN (EXACT PRODUCT USED)
7.3 L powerstroke badge: amzn.to/3NmFIhk (EXACT PRODUCT USED)
Edge cts 3 monitor: amzn.to/41iPeb2
Buy My Exhaust Tip Here- amzn.to/3Alp6Se (EXACT PRODUCT USED)
Bullet Antenna: amzn.to/3TPhKOi (EXACT PRODUCT USED)
Truck Mirrors: amzn.to/3FsFXpo (EXACT PRODUCT USED)
Cold Air Intake: amzn.to/3Dr8lFO
0-60 App/dragy: amzn.to/3TdYvis
FOLLOW ME ON SOCIAL MEDIA!!
INSTAGRAM: @powerstroke.central
TIKTOK: @powerstrokecentral
FACEBOOK (POWERSTROKE CENTRAL): profile.php?...
For any sponsors please email me at bnbmediaagency@gmail.com
#powerstrokecentral #60powerstroke #67powerstroke
Пікірлер: 201
You know, some maybe bashing him on here. But I can 100% tell this guys is putting some hard work into this KZread channel. And I promise you regardless of his experience he will go a lot further than most of you “mechanics”. And I know that’s just eats some of you up.
@powerstrokecentral
Ай бұрын
Appreciate it bro.
@dearjesusboyohboy
Ай бұрын
I wish you luck on the rest of your journey. From the merch, to the upgrades…. However it’s funded (not my business) along with the editing and man hours your putting in the channel. I hope you go far with it.
7.3 turbo replacement is 100% a driveway job.
@kellugz7350
Ай бұрын
agreed
@yourgrandma774
Ай бұрын
I’ve done it
I did it in my driveway. It only took me 3 weeks. 4 hours of working, and the rest was contemplating burning my truck down lol
@gregwright7271
29 күн бұрын
The realest comment here lol
@GarbleJ_
23 күн бұрын
lol are you a idiot?? Turbo replacement is easy just takes some time buddy😅😅
We had 7.3 in a tow fleet. That F350 was amazing. Over 400K miles and she did not use any oil. A great work truck that never let us down.
I know Justin and Josh personally and I can vouch for them. Justin is the best diesel mechanic I have ever worked with. He's so knowledgeable he can diagnose a problem in literally less than a minute. Worked on both my 7.3 and 6.7. Josh has the customer skills and the authenticity to hear customers out. These guys want both sides to win. They aren't going to run you for your money.
Congrats on your shop! It's insane to see how far you've come in the past few months! Keep er goin man, it's awesome :)
@powerstrokecentral
Ай бұрын
Thanks bro it’s a grind
Good job man on getting your own shop can’t wait for content to come from the shop
I would definitely put an Efuel system on it asap before you ruin your injectors, the mechanical pump can barely supply fuel pressure to the stock sticks. Also, put an upgraded hpop like a t800 and it’ll be super noticeable seat of the pants wise and will have so much more low end and throughout the rest of the rpm range. the hpop is a super slept on upgrade for the 7.3’s
Love the content man! You’ve inspired me to go track down a solid 7.3. Keep up the great work and good luck with the shop!
@powerstrokecentral
8 күн бұрын
Thanks bro
You need an intercooler, the intake air temp must be insane on that thing.
Powerstroke Central, amazing video it was really good
@powerstrokecentral
Ай бұрын
Thanks bro
Great video brotha keep up the great work!The truck also sounds amazing!
@powerstrokecentral
Ай бұрын
Thanks man
Bro went from showing cheap mods you can do in your driveway to owning hos own shop and doing installs in less then 2 years props bro PROPS glad to see a young ambitious man setting great examples for others!! Way to go!!
@powerstrokecentral
27 күн бұрын
Thanks bro
As soon as he said he’s dragging something I instantly knew😂 love the 7.3 I’m doing mine the exact same way you have yours
Power stroke central you motivate me to make my own shop here in belize bro love your videos keep it up can’t wait till your at 100k
@powerstrokecentral
Ай бұрын
Awesome man!
Congratulations on your new shop! I'm currently looking for a 7.3 once I find the one I like I'll definitely be hitting you up.
@powerstrokecentral
Ай бұрын
Awesome bro!
@luisvilla4058
Ай бұрын
Might sell mine could use the money check out my pg ?
Don’t stop man this is exactly what I needed to see I’m buying this turbo anyway I can use you as a reference
@powerstrokecentral
Ай бұрын
Yes sir use the link in the description I get 10% commisions
So inspirational keep up the good work
@powerstrokecentral
Ай бұрын
It’s a grind bro thanks.
Wow bro… your own shop! You’re ambitious as hell, lol. Love it. Keep it up-this is your passion.
@powerstrokecentral
Ай бұрын
Thanks bro
I’m needing some work done probably “rebuilding and excursion resurrection 😂
@powerstrokecentral
Ай бұрын
Shit give us a call.
Second gear burn out, nice lol
yooo was looking at buying an obs 7.3 in snook so glad I stumbled upon your Channel, I also live in college station glad to see your popping off!
@powerstrokecentral
Ай бұрын
Awesome bro swing by my shop we open the 17th!
Congrats on the shop!
Proud of you friend 🎉
Definitely a driveway job I replaced 320k mile factory,up pipes,manifolds and rebuilt the turbo in two days in my driveway after work
Congrats on the shop man! Not a ford man but im in Huntsville just down the street. 👍
@powerstrokecentral
Ай бұрын
Awesome bro we work on all vehicles so feel free to come by anytime.
@poschevy7852
Ай бұрын
@powerstrokecentral absolutely. Next time I'm out that way in north gate I'll reach out
@powerstrokecentral
Ай бұрын
@@poschevy7852 awesome bro
Sounds exactly like a GTP38R. I was able to put that in in fronnt if my 5th wheel in a campground. Definitely a droveway job.
Great video brother 😊
Good luck on your opening tomorrow. Wish you all the best. If I'm ever in your neck of the woods, I'll be stopping by. If you're ever in Virginia, gimme a holla. Fly safe. And hopefully you don't break your trans before you upgrade her. :P
Nice video
Good luck my friends ;) 💪😎
6.4 series after this one ☝️
@Cb_boyz24
Ай бұрын
Hell yeah
Just moved to Bryan and been watching you for forever that’s crazy😂
@powerstrokecentral
Ай бұрын
Awesome bro swing by the shop when we open the 17th!
@MichaelVanVeen-tu7dl
Ай бұрын
@@powerstrokecentral definitely will got a few buddies looking to get some work done as well!!
@powerstrokecentral
Ай бұрын
Awesome bro we can take care of you.
Nice! The turbo sounds great. Do you plan on adding an intercooler to the OBS overtime to go along with the new turbo in the near future, if you don't mind me asking?
@powerstrokecentral
Ай бұрын
Yessir hpop is next and then intercooler
Love it
👍 Good job
you are by far my most favorite KZreadr I own a 2015 6.7 powerstroke. I want my truck to push about 550 to 600 horsepower if you can. Could you tell me what type of turbo fuel system would be best for that while also trying to keep reliability I have no price limit as I’m buying these overtime. Please make a video about this or reply to my comment idk who else to go to❤ Much appreciated man.
@powerstrokecentral
Ай бұрын
Thanks bro hit me up on Instagram @powerstroke.central
I got a f350 turbo diesel and I will most definitely be coming to your shop wean I get my new turbo and injectors in
@powerstrokecentral
Ай бұрын
Awesome bro! Announcing the actual location next week!
Thats cool
Ok so i have a 01 7.3 power stroke, and was planning on getting a hydra chip for speed, but after this i need this turbo for sure. so do i need a separate tune for the turbo, or can i buy the turbo and the hydra chip and that’ll do the tune itself. so basically do i need a separate tune tuned by a shop for this turbo, or can i just buy the hydra and turbo and call it a day. hopefully all of that makes sense.
I have the same tailgate as you do on my 88 f150
I like the riffraff diesel 4/4 compressor
I just rebuilt my 300x stage 3 in my driveway. It’s a driveway job.
Heckkkkk yeah. I need a 80% discount to get this turbo 😂
@bman409
Ай бұрын
😆😆😆
I need you to recommend all the parts I should buy to increase the power of my 7.3 obs, I just want a slight increase in power
Evybody on youtube that replaces a turbo does it in there drive way and ive got a torch bro
You should make longer videos!
Only diesel shop I have ever seen without a lift😂
@powerstrokecentral
Ай бұрын
We arent even open yet the lift comes in next week. We open the 17th as said in the video.
*best diesel KZread channel*
@powerstrokecentral
Ай бұрын
Thanks bro I spend 50 hours editing them.
Is it a good idea to install a KC300x stage 2 turbo in a stock truck? My truck is a 1994.5 f350 powerstroke
What oil do you run in it
you should put some paint matched l5p tow mirrors on
I wanna see him build a 6.7 Cummins
What is the rear axel ratio? Do you know the axel code?
🎉🎉Your own shop?? So where do I drop my 07 6.0 lariat outlaw off ?
@powerstrokecentral
Ай бұрын
Coming out with the loctation next week Tuesday.
Did you put a different downpipe on it? Please tell me it isn't the stock one. Great vid
@powerstrokecentral
Ай бұрын
It’s not the stock one
@believethegospel2782
Ай бұрын
@@powerstrokecentral good to hear, I really love your style of videos, actual build series.
Did u have to put the down pipe in
You should get a jelibuilt tune instead of the hydra
Are you planning on doing any 6.4 content in the future?
@powerstrokecentral
Ай бұрын
Yes if the shop does well then I will.
Gears? HPOP next?
1.0ar housing or .84?
Videos are great man. I love seeing someone show some love to an old 7.3. But dude you gotta keep at least one of your hands free while driving 😂. Would hate to see you get pulled over for holding a giant camera and your phone. Idk or don’t doesn’t affect me at all just my 2 cents.
Forgets to bolt spare tire carrier. Sound like a place I wanna take my truck.
@powerstrokecentral
Ай бұрын
Sounds like u watched damn near the whole video thanks. And the spare tire doesn’t fit anymore because of the 5 inch turbo back so yeah it just sits there for now until I get a different one.
Maybe put 2 of the new tires from your 6.7 on the back of the 7.3 for 0 to 60 tests.
Shoulda done a T4 kit
I'm hoping he does a 6.9 or 7.3 idi next
@powerstrokecentral
Ай бұрын
If the shop does well i will
I bet the next video will be, "Putting the best transmission in my 7.3L powerstroke"
Some have man hands from using hand wrenches for the pedestal bolts.
Intercool it next
Should have a done a big s400
Barely squeal the tires.. bro we did a HUGE burnout
I also want to increase the power of my 1995 7.3 truck a little but I live in Mexico and they don't ship to Mexico
Maxes out at 85???
If I was to just take the muffler pipe connected to my DPF off will it be noticeably louder cuz I want to do that
@powerstrokecentral
Ай бұрын
There is no dpf on a 7.3
@Bigg-_-Nickzz
Ай бұрын
@@powerstrokecentral sorry I didint put on my 6.7 but on my 2011 6.7
@powerstrokecentral
Ай бұрын
@@Bigg-_-Nickzz okay no it won’t make it louder
@Bigg-_-Nickzz
Ай бұрын
@@powerstrokecentral alr thanks if I was to delete it I’d be in jail where I live 😂😂
Can you say where the shop is I can’t understand you like what town and state bc I’m intrested in coming by
@powerstrokecentral
Ай бұрын
Yes sir we are currently getting everything in the works so we still need business insurance. I didn’t want people to come to a shop that is not insuranced and doesn’t have tools in it lol
How much is your insurance for the obs 7.3 thinking of getting one
@powerstrokecentral
Ай бұрын
$120 a month
@10galaxyboio82
Ай бұрын
Thanks
First like I love your content
@powerstrokecentral
Ай бұрын
Thanks bro
I dont have the budget for turbo and injectors which is going to give me more power i dont care abt fuel mileage whats gonna give me the absolute most power
you can absolutely do it in your driveway. just have to be smart about it.
4r100 begging for mercy
Do you know what A/R size you went with .84 or 1.0?
@powerstrokecentral
26 күн бұрын
1.0
@gmdetroitcowboy7243
26 күн бұрын
@@powerstrokecentral great thank you!
Why didn’t you do up pipes and a intake
@bullettclubb7934
Ай бұрын
stock intakes are good for up to 500hp not a need , more of a want
@dirtbikedude1334
Ай бұрын
@@bullettclubb7934those intakes are so restrictive they are not good for 500hp😂 and they make a huge difference on stock truck let alone a truck with big injectors and a big turbo, and those up pipes are really restrictive and they leak really bad especially on a truck with that many miles
hi so i’m wanting to do the exact thing you did. is it a direct instal? or do i need to do some mods. my 7.3 is stock
@powerstrokecentral
Ай бұрын
Direct install no supporting mods are needed
@quintonwittrock3544
Ай бұрын
@@powerstrokecentral thank you! when i click to buy the turbo there are multiple different options for things? what ones do i pick?
@quintonwittrock3544
Ай бұрын
@@powerstrokecentral like what are the specs or options that i should click to have
@powerstrokecentral
Ай бұрын
@@quintonwittrock3544 Instagram would be a better spot to contact me. @powerstroke.central
@powerstrokecentral
Ай бұрын
@@quintonwittrock3544 do the 1.0ar and no you don’t need a pedestal. And if you have a hydra tuner select it.
100% can be done in the driveway lol
i want to put a cat turbo on mine
Don’t run ur diesels below a quarter. If you do it too many times, it fuel pump will grenade and send metal thru ur fuel system (up to injectors and more).
@FF-po6gx
Ай бұрын
If you do run it down a lot, put a Fass or airdog, a metal fuel pump in their cause factory ford fuel pumps are aluminum. So I don’t think it will shred up like the stock ones.
What tuner do you use?
@powerstrokecentral
19 күн бұрын
Hydra and jellibuilt tunes
@IGNORANTAUDIO
19 күн бұрын
@@powerstrokecentral i appreciate that brotha im trying to get a 7.3 and im looking at these turbos
Is that truck ever going to get a 4x4 swap?
@powerstrokecentral
Ай бұрын
Yes
"this is not a driveway job" brother everything is a driveway job if youre brave enough
Yoooo
A upgraded hpop and intercooler would make it faster
Texas ?
@powerstrokecentral
5 күн бұрын
Yessir
But I own a torch
This is absolutely a drive way job 😂 literally everyone who has installed a turbo has done it in there drive way and no offense I’ve watched a lot of your videos it’s scary that you opened a shop.
@powerstrokecentral
Ай бұрын
U know I don’t do the work right I have a certified tech do it. I’ve been doing this for 6 years and have done my driveway jobs and if I would have done this without a shop I would have been there for days.
@Kodi5204
Ай бұрын
@@powerstrokecentral no joke I have a 01 7.3 I can pull the turbo and put a new one on in 5 mins. I’ve done it an about 30 times. But got yuh just learn from the teck
@FatBoy7.3Powerstroke
Ай бұрын
I do most of the work on my truck in the grass and dirt in a slanted yard on a mountain, I’m 52 years old and plenty grouchy, So Man I do what I have to do whether like it or not. Shops and concrete would be much easier but sometimes ya find out what you’re made of when the challenge gets conquered. Cool video! I have the kc300x 63/73 .84 stage 2 with 180/80 holders premium injectors, 5” turbo back MRBP exhaust and a bunch of other great additions but still porting the heads so I’m in limbo mode, this video got me All Jacked Up like a Spider Monkey! Good Luck with your Shop, I think it’s a Great Investment
@powerstrokecentral
Ай бұрын
@@Kodi5204 thanks for watching my content
@powerstrokecentral
Ай бұрын
@@FatBoy7.3Powerstroke yessir that’s almost the exact same setup I have on mine.
I like the channel but brother, what are your qualifications for running a diesel shop? Have you ever worked on a vehicle professionally? Your vocabulary when describing things says this is not your field. Did you go to a diesel trade school? Anything?
@powerstrokecentral
Ай бұрын
I have a certified mechanic working for me I don’t actually wrench on the trucks. U think every shop owner in the world has every qualification known to man. No they hire the person who does business 101.
@theccwdad
15 күн бұрын
Roger that man. I've been a tech since 2009 and the last couple of years spent in the front of house. If you have any questions I'd be happy to chat. The best advice I can give anyone is take the responsibility and your liability seriously. I personally kept us from having to go to court because of detailed notes when you see something as a technician. If it's is in anyway possibly going to be an issue or is unsafe write it on the repair order and underline it and initial the note. Some customers will try anything to keep themselves from having to pay for their mistakes or poor choices. I had a Scion TC come in for an oil consumption test, aftermarket hid wiring was sketchy and looked like a fire hazard so I wrote it down and told the advisor they had to put the car electrical system back to stock for safety reasons. The next week I swear to God that car came in on a flat bed burnt to a crisp. The customer was in the managers office threatening to sue us until the manager pulled up the repair order scanned copy and showed them my huge all caps note about how the car was unsafe to drive for x y and z reasons 😂😂😂😂😂😂😂😂 they left so pissed off and the manager walked over to me and shook my hand and told me good job. The only time 😂. I have also been to court in defense of a customer who was being mistreated and we won the case!
Was that the stock downpipe?🤦🏼♂️
@powerstrokecentral
Ай бұрын
No
What's the best coustum tunes to get to roal coal?
@bullettclubb7934
Ай бұрын
ppl don’t make shit like that anyone , upgrade your fuel and air
@Llyduramax
Ай бұрын
Why do you want to roll coal? Cause that’s bad for your engine and it’s not cool
@CJHayhurst
Ай бұрын
@@Llyduramax because it's fun to piss people off
@Llyduramax
Ай бұрын
@@CJHayhurst you can do that with any high hp tune and I bet it’s also fun rebuilding your motor huh?
@CJHayhurst
Ай бұрын
@@Llyduramax I mean she's held up for 340k miles lmao sorry to hurt ur feelings little bro
Bigger turbo without other mods will not give you more power. You’ll probably have less power.
@powerstrokecentral
Ай бұрын
I have 180/30 injectors and hydra
Bro get rid of that cobra head ass factory downpipe its so restrictive
@powerstrokecentral
Ай бұрын
It is removed already
man its cool but you gotta admit its a waste of money modifying that truck if you aint going all out like any v8 truck with 300hp will gap it
@powerstrokecentral
Ай бұрын
It’s not a race truck