I fix coin sorters for large grocery stores. The dirtiness of coins cause issues even in the best sorters. The best coin sorter i have worked on uses a rotating near virticle rubber wheel to get the coins on their side, then it will sort by height by knocking the tallest off the track first then getting smaller. Hard to explain in a KZread comment. Great first attempt

@robintay1449

3 ай бұрын

Thanks for taking the time to explain.

@pinobluevogel6458

3 ай бұрын

It's comforting to hear from a professional, that it is actually quite a hard job to do. This makes this early prototype sorter from lego parts even better.

@CJ-ht4rf

3 ай бұрын

The dirt slowly rubbing off of the coins was my first thought too. You can tell at the beginning they definitely slid much faster and then it got progressively slower the more times he tried it

@thomashverring9484

2 ай бұрын

I've been working with huge coin sorters, I mean industrial size, and they still get clogged up by dirt. Cleaning them everyday was nasty.

@weirdestbudday5353

2 ай бұрын

This comment should be pinned. It's great and useful info to help us all understand better

Because dimes used to be silver, whichnisnworth more than copper and nickle, so a smaller amount is more valuable.

@Gekoloudios

3 ай бұрын

Hey you also accidentally type n instead of putting a space, I do that too lmao

@Fan-lq6uv

3 ай бұрын

Right, and to follow up on this, had US kept using silver, the nickel and penny would have been really small. US was forced to use different metal for nickel and penny so they are bigger than a dime

@GoldenMysticat._

3 ай бұрын

Bruh sometimes it's a c or a x

@patrickdix772

3 ай бұрын

Since I've always found coin materials interesting, some more info. The US silver coins used to be a silver copper alloy (for durability). Modern silver US coins (except nickels) are now a copper core with a copper nickel alloy cladding (changed since the value of silver increased in the 60s). The modern "gold" dollar coins actually have no gold in them. Older gold coins were a gold copper alloy (copper for durability again), and silver dollar coins were made for a long time too. The modern "gold coins are a copper core clad in manganese brass (a copper and manganese alloy). Nickels were originally called half dimes, and were established as "nickels" in 1866 being made primarily of nickel, and modern versions have a higher nickel percentage than other "silver" coins. Pennies varied a lot over time, starting as 100% copper, and varying greatly as metal prices and demand shifted, including a steel penny used in WW2, now almost entirely zinc with a thin copper coating.

@chanseysworld3748

Ай бұрын

“IM HIGHLY OFFENDED” (inanimate insanity Nick le)

For the problem with the coins getting stuck maybe take away the turn since it's losing a lot of it's momentum while going into that turn. And maybe add some sort of power function system that is able to vibrate the actual sorter so that even if the coins do get stuck they'll eventually fall into the desired slots. As for the coin being on top of each other maybe you could have some sort of system that will allow only the thickness of one coin to go into it although this could pose a threat to the machine being constantly jammed. I hope you develop this project further as I don't see too many coin sorting machines out of lego.

@h1ghdipp3r32

3 ай бұрын

or just make the flat pieces on the sorter thinner so that there is less surface area on the coin and it will slide better

@jaredwonnacott9732

3 ай бұрын

The turn makes sure that all the coins are sliding against the far railing, because otherwise coins could be a little off the rail and miss their slot.

@brlinrainf

3 ай бұрын

My idea is to put water on the lego so it helps the coin move

@brlinrainf

3 ай бұрын

@@h1ghdipp3r32 I don't understand

If you look at the Japanese ticket machines or tills, you may find some inspiration: you can throw money inside and the machine will perfectly count the money and also identifies the ticket you are using in-between the coins (for machines in buses, where you throw the money and ticket all together before exiting the bus, to demonstrate you paid the fare). Anyway, it's basically a funnel, but designed in a way that the weight will not jam everything.

@danquaylesitsspeltpotatoe8307

3 ай бұрын

Or put the coins in the machine at the bank for free! Or dont horde them!

@jossdeiboss

3 ай бұрын

@@danquaylesitsspeltpotatoe8307 Legit but...where is the fun then?

The coins are stacking because they climb over the ones that are stuck. Keep them from getting stuck. A small motor with a counter-balanced weight on the end can be used for a vibrator. Tilt the assembly slightly vertical more yes, but with the angle you need to get them to roll by themselves you will not have as much help from gravity, they will most likely have too much speed and roll right past the hole. As someone said, put a funnel and take out the turn. I would add the vibrator to the finish line of the assembly and a tapered gate with fingers at the bridge from the funnel, preferably with flexible material to help reduce jamming.

One of my first custom LEGO builds (i.e. not following instructions included in a set) was a coin sorter that could differentiate between 2€, 1€ and 20cent coins. It worked flawlessly and is still standing as part of the wall of a little LEGO house in the attic in pur house back in Germany.

If you say the half-dollars are huge, image the ike dollar (eisenhower dollars). They were the dollar coins before the sacagawea dollars and the small presidential ones. They were twice the size of half-dollars (in weight). Also, dimes are the smallest because before, they were worth their weight in silver. So the weight of the coin was the value. However, for pennies and nickels the metal was not the same.

@Nominal-Lettuce

3 ай бұрын

I have one of those!

@ME-kd1ko

3 ай бұрын

How come your comment is already edited, but still has the ugly, ugly mistake of "there" when "their" should be used instead?

@roideschiffres6760

3 ай бұрын

​@@ME-kd1ko You are right, I will fix it.

Now make a machine to sort legos. Out of coins.

@ranawoodward5982

3 ай бұрын

Bro did uno reverse card

@schedulefancher

3 ай бұрын

Lololololol

@the-darkness645

2 ай бұрын

lololololololllllllll😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

@Averagecapcutuser

23 күн бұрын

Lol

@Averagecapcutuser

23 күн бұрын

Underrated comment

Coin sizes were set when it took $0.10 of silver, pennies were made of copper and the size was the amount of copper to equal $0.01. The Nickle was how much nickle was worth $0.05. And so on. Now none of the coins are made of solid whatever substance, and it costs far more to make a penny than what it is worth.

@InventorZahran

2 ай бұрын

I thought the whole point of sandwich coins was to reduce the cost of minting...

Most coin sorting banks don't sort by value. They sort by size. So the dime would be the first bin while the 50¢ piece would be on the end.

@sputnik819

2 ай бұрын

𝘁 𝗵 𝗶 𝘀 𝗼 𝗻 𝗲 𝗶 𝘀 𝗯 𝘆 𝘀 𝗶 𝘇 𝗲

@InventorZahran

2 ай бұрын

Sorting by size would be much simpler to design and build, but BrickStudios went the extra mile!

@verttikoo2052

Ай бұрын

😱 What keyboard combination gives the cent sign?

@randycarter2001

Ай бұрын

@@verttikoo2052 Windows: With NumLock key enabled: Hold the Alt key, type 0162 on the keypad.

Oh man this is the kind of project I like doing with patrons at my library (mostly kids but I wish more adults would get into it too - my programs are designed for certain age ranges but all of them are open to all ages). Yeah I've decided. We're gonna do this project for one of our lego clubs.

@brickstudiosYT

3 ай бұрын

Glad to have given you the idea! Hopefully they enjoy it!

ill do my best to explain why the nickel is bigger then the dime. in the early days of the usa, the coins were worth the metal content, so a dime was made of 10 cents in silver, etc. and we had a half dime, whih was smaller, but worth 5 cents, and in 1866, silver was going up in value, so we moved over to making nickels, which were worth 5c in nickel, im glad this guy isnt sorting the 3 cent pieces and the 2 cent piece. that would make it a lot harder. nice sorter, gets a sub from me

@brickstudiosYT

3 ай бұрын

Oh wow, that makes a lot more sense! Thank you!

@nicholetommolino4439

3 ай бұрын

I like your comment

@pinobluevogel6458

3 ай бұрын

Thanks for the explanation!

I came here before you finished and yes I agree, you should have it so they roll more vertical instead of sliding.

You should definitely build a cool and uniform outer-casing for the internal machine (everything you’ve already built) housed within a cool Lego box. You can even include snot brick character elements to enhance the look. Another idea would be to implement a way to add empty coin rolls to be filled by your Lego sorter just like real ones do. Overall INCREDIBLE build. So amazed and impressed!!!! Keep up the incredible work!!!

For an autofeeder if you have a box with a spinning part in the bottom, like a stirring to push them onto the slide part. Maybe a slightly angled ledge above the pusher so a few fall down there at a time so they weight doesn't just jam the whole thing.

@brickstudiosYT

3 ай бұрын

The only issue is that two dimes could fit in the same slot vertically as a quarter or anything larger. But other than that it might work. Thanks for the idea!

@Canine_Medal2316

3 ай бұрын

Id suggest putting a layer of 6 by whatever plates over the top instead of lining it with 1 by whatever smooth plates. This way, only so many coins can go through. Also having a side bar attached to it to store the coins on their sides and moving the slot to the side should ensure that only one coin goes through almost every time.

The sizes are exactly proportionate from when they were silver. A silver quarter weighs 2.5 times more than a silver dime. A silver half dollar weighs 2 times more than a silver quarter and 5 times more than a silver dime. A silver dollar weighs twice as much as a silver half dollar, four times as much as a quarter, and ten times as much as a silver dime. Pennies and nickels weren't silver, so their size was not dictated by their weight.

@djk6297

3 ай бұрын

During WWII copper was an essential war material. As a result, nickels had silver in them for some years. In 1943 cents were zinc-coated steel, making them much lighter.

To help with coins getting stuck down the ramp, try rubbing paraffin wax, or a candle, on the ramp then polish it off with a clean cloth. Good job on the sorter!

This reminds me of my old LEGO projects when I had a huge box full of LEGO. Did very similar things. I vaguely remember doing some coin sorter too.

If you want to input a bunch of coins at once you should make a slanted spread plate, where you dump a few coins on and spread them out by swiping the hill of coins around, when they're flat they can slide into a slit at the lowest corner to go into the sorter one at a time. And I'd recommend you make it a rolling sorter, because I built one some years ago and it sorts the coins while they roll down a ~45° slope and lean against the wall of the completely-vertical, 1-stud-wide channel. I got them all leaned on the same wall by letting them slide down a short ramp into the sorting channel.

Where's the scene from the thumbnail?

@ManuelGonzalez-pm3qq

15 күн бұрын

clickbait

@ManuelGonzalez-pm3qq

15 күн бұрын

duh

thats cool! maybe change the tubes to drop into containers so coins wont jam

Make it drop into a bigger container so that there is space for more coins, make the whole system less compact and make more room for the slides that move them around, put the whole thing on a shaking platform to force them to glide even when they are dirty, and it should all work 🤗 Then add a feeder 😉

Maybe use Lego motors to add vibration to a coin hopper and make the exit only one coin thick?

this was fun to watch. I'm glad you kept in the parts where the coins got stuck, shows not everything is perfect!

Amazing bulid with Lego! it may work better if make it a more vertical so the coins could roll and reduce the friction

Maybe a light spray with silicone oil and polishing off with a clean, lint-free cloth might help getting the coins down the ramp. Also, a small battery-powered vibration motor connected to the ramp might be helpful as well. Just some thoughts from somebody who tried something similar for Deutschmarks... 😄

@InventorZahran

2 ай бұрын

A bartender in the U.S. once accidentally gave me a Deutschmark with my change instead of a quarter. I added it to my international coin collection!

Dimes and dollar coins are smaller than coins that have a lesser value because of a desire to maintain a scaling property between dimes, quarters, and half-dollars. Each of those 3 coins contains the same blend of metallic alloys (the other coins are different blends.) Further, each of these three coin's masses scale exactly with their values. I.e. a half-dollar has twice the mass of a quarter and a quarter has 2.5x the mass of a dime. That way, any given weight of dimes, quarters, and half-dollars has a set value, regardless of the mix of the coins. If you had some amount of those three coins, any equal value substitution corresponds to an equal weight substitution. You can take a half-dollar from your pile of coins and replace it with five dimes and the value and weight of the pile remain the same.

For batch sorting, I would have a gently slopped shelf in the shape of a Y which funnels coins to drop off the edge vertically onto a ramp so they then roll down the ramp towards the sorting holes. There would need to be some way to vibrate the shelf so that the coins slowly trickle forward.

I’d make a ramp leading up to the coin inserter which would also add momentum but still sort them on by one.

This is a pretty good attempt at a coin sorter, I think if you use gravity better and tilt the slopes further and more steeply, most of the issues of things getting stuck are solved. Also, making a curved path for things that have to go round, instead of slopes falling into slopes will lose less momentum, a sort of playground slide if you will, then getting the whole contraption higher up and having bigger containers will make sure there will be no clog of coins at the bottom. Lastly, having a more stable base shouldn't be too hard to accomplish, the whole thing looked pretty flimsy with the awkward angled legs. This was a fun experiment, thanks for posting it. It might be a fun idea, if you have the time and are willing to re-iterate on your design and make a second or third build after this, trying to fix the issues that you encountered. The whole idea of making such a project is improving while you do it and I think you did a great job at mentioning the current flaws. Also, as a general rule for a LEGO channel, having a nice looking color design is a huge plus. Just invest in the most common bricks in 2 or 3 colors, so you can at least build something that doesn't look haphazard. I'm not a huge brickowner myself, but for such a relative small build, it shouldn't be too hard to get something done in one or 2 base colors. Then again, don't take the criticism too harshly, this was a great idea and some very smart solutions for a functioning first design!

@timmothycopeland4866

2 ай бұрын

Keep in mind, the steeper the slope the faster coins will go increasing the chance of the skipping over their respective destination.

Cool. I had a coin sorter that sorted them into cylinders that were the same size as coin roll papers. I don't really interact with physical money much anymore.

Nice work! I also made one a while back, the 5C and the quarter were also very close in diameter haha

Reminds me of this book I used to have when I was younger, where it showed you how to make 50 lego machines. It was awesome.

This is so fun. I appreciate you showing what went right as well as when it goes wrong

I would put a bar across the top to make sure coins dont stack on top of each other when sorting, (like the height of 1 coin) that's how some coins were able to bypass thier respective slots.

So many people here offered there solutions! Great teamwork all around! 😀😃😄👏👏👏

My pride and joy as a kid was a candy machine that wouldn't work without the right coin.

Looking forward to a more reliable version of this if you plan on making one in the future! Maybe make a color scheme, more reliable storage, and coin sorter on top??? 🤔

You could add a very small vibration technique (like a game controller offset spinning weight) to gently shake the machine and keep the coins moving the whole time.

Something like this would be neat for an actual Lego set. Minus the Dollar and Half-Dollar, who even has those anymore?

@KaitouKaiju

3 ай бұрын

I have a bag full of dollar coins

I got curious about this video because I made a coin sorter of my own awhile ago, and to this day I've been upgrading it a lot. It's now the size of a basketball, but as a cube, and the lower half is all for storage (so I don't have to worry about too many coins like you did with the pennies). The upper half is split into to other parts, one that is drawers to actually hold dollar bills from $1 to $100, and the other part is what actually sorts the coins. The sorting system is also vertical, like what you were talking about at the end of this video, and I have no issues with the coins getting stuck or not moving all together, but that also has to do with the angle that the sorting part is at. I know I had to tinker with how the coins are sorted, mainly the penny and dime because of their close size, so I had to actually improvise and make some kinda weird formation that catches pennies to keep them going but the dimes end up falling down. In the storage, I only have pennies, nickels, dimes, and quarters (half and full dollar coins didn't seem worth it because I, like most people, don't have many of those), and each coin has about a quarter of the 32x32 (I think that's the size anyway) baseplate that the entire structure is built upon. I've also built a few other compartments, such as one to hold a brick separator, another holds two rods (one's hard and the other's flimsy, and they're for unclogging anything), and the newest one that I added on actually holds my wallet (I thought it was a fitting addition since this whole machine now has all of my money that I have that's not in my bank account). Since I've done so many tiny tweaks to the sorting of the machine, the rods and the brick separator hardly ever get used anymore because my machine is so precise and I haven't had a clog in maybe a year now, if not longer. I've also placed the thing on another identical sized baseplate with a rotating piece and tiles surrounding it, so now the 20lbs machine can rotate on my desk (I had to also place a little grippy pad thing underneath the whole machine because else the base part couldn't actually rotate under it's own weight). I think you got a good start to a great coin sorter, and it was really cool to see another person's perspective on how one might build one of these.

I would add a motorized agitator to the top tray, should help the coins feed better - every coin counter/sorter I've used has them.

One thing to try would be to have a belt system that rests on top of the track you have made, to push/pull coins to their slots, and it would reduce the chance of coins getting stacked on top of eachother, as for the feeding system, it could also work with like a funnel that flattened out, with part of a belt pulling coins in one at a time

make is so that there is a hole in the bottom of a tube/cylinder and the coins drop onto a platform. There is a sliding thing on the platform that pushes the coins into a seperate chute where it falls into the sorting mechanism. This is the simplest way I can think of, and it allows the coins to enter the sorting mechanism one by one

I built one about a decade ago. My needed extra engineering because I didnt have technic or snot pieces. I cant dump a bunch in, they have to be fed one at a time, but it never jams, never gets stuck, and never sends a coin in the wrong chute. If you'd like to see how i did that let me know. I later made one out of wood based on the same concept that I actually use. The lego one sits in a cabinet.

I was smiling through this entire video haha. This video should be used as justification for getting rid of the penny permenantly.

the reason it started having issues was probably less about the coins being dirty and more about the overall weight of the system stopping it from shaking and letting the coins move more freely . you could test again with it emptied out and see if it starts jamming around the same volume

To help the problem with the stuck coins you can put a spinning fan kind to act like a spinning door to push the coins and to make the process smoother

The coins could be guided past the traps on a conveyor belt and a scanner pushes the coin into the correct opening using flaps.

A working coin lego sorter would be much more impressive 😅

No coin sorter (that I’ve seen for home use) is perfect. This looks like it works pretty decently. One change I would suggest is to make the entire thing taller. This will give you more room in the individual bays to hold more coins. Maybe you can tune it so that each bay holds exactly one roll of whatever the coin is?

Perhaps use some technic pieces to act as an agitator so the ramp is moving and gravity can move the coins. Also, i think coin sorters have the coins on their edge so they can roll regardless of how dirty the coins are.

Idea: Extend on the slots where the money goes by attaching containers for them to drop in, because you can’t fit much in how it is. You would obviously need to secure it aswell.

Just subbed! nice video!

This is a cool idea! Keep working on it!

Something like this need to be a set it would sell, as a kid I remember thinking coin sorters were fascinating for some reason.

Great first attempt. Would love to see one with a crazy mechanism like a pendulum dropping coins. I think if the top tray was also at a 45 degree angle so coins rolled and slip, you would get more consistent sorting. Also, why not build it high enough to let coins fall into paper rolls?

I would try to make it work with "wings" instead of holes. (1st wing flips biggest coing out of track.. etc...) That way you can make the track more vertical and coins can roll more than slide. Maybe that helps with a friction.

Marvellous engineering and build for something that at the end of the day is pretty useless. I love it. :D

Have you ever been to a planetarium? They tend to have a black hole simulator you can run coins on. When it gets to the bottom the coins are moving flat. Coins also don't pile up on each other. If you find a way to use centrifugal force, you might be able to sort multiple coins at once. Try using clear pieces. It will make troubleshooting easier. Maybe make the chambers round so the coins land flat.

Right now you can fix this using gravity you can make the coins sideways it a really good idea, you want to make most of them drop down not in an angle, SO you can make 1 of the coin go around another instead of 2 switching with another this makes it more consistent, and reduce jamming problem. If you can make a thing more simple, do it. complexity is harder to do and comes with more problem.

If you want to put more than one coin at a time, just make the mouth area bigger. Like a longer shoot that starts wide and gets narrow where the coins enter the sorter.

I think if you where to make this into a rotary system with a hopper on top you could avoid them from getting stuck mostlikley and build it into a nicer design where it would not use so many slanted pieces where the coins can get cought on jagged edges. And with that you can also use a LEGO motor to turn the coins.

Maybe reverse the sorting so big ones will not bring the smaller coins with them as well. But yeah prone to jam so might need some power functions like a rotary arm to ensure constant clearance and flow.

Not that bad for a first attempt. I would make it a little larger and steeper to help facilitate the movement of coins.

It kind of defeats the purpose of sorting coins if you have to put them in one at a time. Still, very cool. Good work!

@brickstudiosYT

3 ай бұрын

Yeah, if I make a part 2 to this then I'll definitely try to find a way to do it.

@anshsgh6092

3 ай бұрын

u dont have to look at them tho

If you have them flip an roll on ther side you could make it more efficient and save space for sorting

This is one of the coolest things I’ve ever seen

Tilting the coins more on edge so that they roll more than slide is how most actual sorters keep from sticking. Also, dimes are (much) smaller than nickels because they were originally made from silver, whereas pennies and nickels were less expensive metals. Same deal with the (originally silver as well) half dollar and the (originally gold) dollar coin. In most cases we've kept the size (so as to not F up all the existing sorting machines) even when the reason for the size has become moot. Very nice build though. Bonus challenge: separate Canadian pennies from the US pennies...

In some of coin sorter, the machine vibrates to avoid stuck coins. It's the same as you slam the desk with your hand.

Track should be oriented vertically, with a slight slant backwards, to guide the coins into their correct chute. That's how older vending machines operated to deal with dirty and corroded coins.

Try making the slots the coins fall through longer, that way you can make the ramp steeper and they wont get stuck so easily. Or, consider changing the angle of the ramp so the coins are closer to vertical so they roll better.

This is impressive because it sorts by size, but then ARRANGES them by value.

How about putting a lot of wheels on top to slide the coins and it uses springs too to get a good grip on the coins Put a slope after each hole so the coins has less chance of going over the hole

What I'd do is create an initial drop that creates a little more speed, so that the coins have enough momentum to make it to their slot.

Huge props for using a Pick-a-Brick cup to hold the coins. Also, I wonder how many people who weren't already familiar with the concept of Studs Not On Top thought, "What's a snot brick?"

@brickstudiosYT

2 ай бұрын

Yeah, I needed a container for them and I just grabbed a pick a brick cup. You're right though, I should probably make things like snot bricks a little more obvious to the non hard core Lego fans 😂

As a child, I've tried something similar, but using weight to select the different coins. But I also struggled on sorting them by value and having multiple at once...

you should make the shoot one coin thick that makes sure they don't go above each other make the shoot more vertical as you said but make it so that they roll not slide make the coin base taller and make the queue sorter bigger so it won't get stuck!

I actually need a machine like this because my current coin storage method is quite a mess (just throwing them all in a ziploc bag, lol)

Coin slide sorters do get dirty because of the dirty coins. So you have to clean the slide often. Sometimes putting baby powder on it will help for a while but really, it is hard to avoid it getting gunked up if you use it often.

Have you considered using a motor to create vibration in the structure itself? Just an off-balance crank directly driven by the driveshaft should do the trick.

I love how a coin sorter is the one that replaced your most viewed video.

Would be better to create a circular plate with each coin hole and agitator spikes, with a motor spinning it. When the hole passes over the matching container, the coin will drop fully down.

Oh my gosh!! You are amazing. Great job.

its really cool but if you could maby get a custom clear bricks i feel like it would be cooler if you could see the coins going down

You my friend, never fail to amaze me, I've been using legos for 10+ years now, & I've never even thought of making a lego coin sorter, I have big tubs of legos, Im always trying to think of unique ideas, & this has never crossed my mind! You're amazing! #LegoGod

Maybe have a technic style conveyor belt that you pour your coins onto (steady pace) then as it runs you keep adding to the belt Not sure what could be done to consistently account for non-clean coins… if you make the angle sharper then clean coins might have too much momentum and “clear the jump” as it were and if you try and make a ramp style system where they drop down from a vertical state then they might clip’n’skip to the next chamber Either way you’d want to make the unit taller to allow more coins to collect in each chamber, but also maybe hinge clear window pieces to keep the coins from falling out the bottom, as well as a way to access the stacks better for when you want to coin-roll your change Good v1 though… but I kinda wish that the thumbnail wasn’t totally misleading in terms of the finished prototype

The easiest solutions i could think for the three problems you have are: A lego pouring cone to allow multiple intake but exit of one coin at a time. Allow the cone to rotate so if something is stuck you rotate it and it resumes 2) increase the inclination or add the technic mini wheel instead of just tiles. That might make it a bit thicker. 3) to improve performance pass the coins two times from the sorter instead of once that will help if coins are one over the other

Most , if not all of your issues, would be solved if you had just made the slots from smallest to biggest and not from cheapest to priciest, but I guess you already know that. Even the stucking issue on top of the slider due to "dirtiness" would be solved because you could have tilted the slider more. But this version is cooler and you could demonstrate better building skills through this. I'm not that much into legos but super cool video and I might make an easier version for myself in the future, although I'm not sure if it would be possible for my country's currencies

Idea: add a lazer that it knows when a coin goes in a hole and adds it to a counter abd it shows the total of them (with lego technic)

Lol i think this needs refining 😂 So i would suggest putting a roof over the sorter so the coins dont stack then something to vibrate it to move the coins or a conveyor belt as for the coins getting stuck try rounding the corners of your ramp so they dont slam into the sides and lose momentum also try adding slopes to fill in the gaps between the halfs of the machine

Idea make the fall slots wider and add a big ramp that should work

Some reason this was an algorithm recommendation, enjoyed the process of seein a master and the craft

@brickstudiosYT

2 ай бұрын

Great to see that you enjoyed it!

The reason the dime is smaller than the penny and nickel is because the dime used to be made of coin silver and it was once 1/10th of an ounce of coin silver (an ounce being a dollar of silver). Pennies were once entirely made of copper and were valued at a cent and a little bit over (the extra amount of the penny value was supposed to help pay off the national debt). Nickels are (perhaps unsurprisingly) mainly made of nickel and zinc. The quarter was also intended as a silver coin and once had a weight of 0.22 ounces. (being slightly less than a quarter ounce of coin silver). The Kennedy half dollar was originally a silver coin having a little bit over a third of an ounce of coin silver. Of course, today's coins do not have anywhere near the same intrinsic value in metal as most coins are now entirely alloys of nickel, copper, and zinc.

there is no point for this but was still super cool! great work

You should use a conveyor belt system just without the conveyor belt so the dirty coins won't get stuck problems by using the Lego wheel or something like that and from keeping the coins riding on top of each other you should leave a gap between the top and bottom of the coin

3:53 made me chuckle 😂😊

How about mindstroms maybe make a color sensor and make a rack and pinion it takes it to it

We NEED detailed building instructions, PLEASE!! 😊😍💖

If you wanted no other coins in an area, get a cheap vibration system to help