I thought I could smell burning paint for a minute. Love it!

Nice build. All the paint burning off at the end makes it seem quite dramatic.

Good morning from Southeast South Dakota

So awesome man. I have really enjoyed this series of yours. I’m excited to see what you have in the future! :-)

Just a tip, if you clean up that pipe before welding it’ll weld much easier, be stronger and look better, cool build though! Nothing like a bit of scrap upcycling!

@torvusjunction

2 жыл бұрын

Thanks for the tip

The goal of welding is to stick together two pieces of metal that were never stuck together before you’ve accomplished that well done❤️‍🔥🇺🇸

@torvusjunction

Жыл бұрын

Haha thank you!

Excellent! I've got a lot of spare pipe, a leafblower, a welder and about 250L of waste oil to use! my garage will be nice and warm this winter :D

@sandert8901

Жыл бұрын

Probably better to just buy a diesel heater, those can also run on used motor oil

Great build! On a side note how old was that sales paper? I haven't seen meat prices like that in a long time. Keep up the great work 👍

Awesome build brother 👏🙏🙌

Looks exactly like the ones I have Built! :0) Well done!

@torvusjunction

2 жыл бұрын

Haha I never thought you would ever lay eyes on my video! This was actually inspired by your exact build, I have to admit this is the most intimidating project I have ever done. Watching your videos is one thing, building one and experiencing the raw power of these... Damn.

@glumpy10

2 жыл бұрын

@@torvusjunction I never thought of them as Intimidating but I guess I have got used to them over the years. That's a Classic Comment none the less. The power you can get out of them is inspirational and when you see it is coming from something as boring as some old Oil, does make one think. Hope you do some more vids of it. I very much enjoy getting to see other peoples builds and what they do with them.

Seems to work well Maybe you can add a needle valve for precise adjustment of the oil flow.

@torvusjunction

2 жыл бұрын

Thanks for the tip!

Awesome

You can't be good at everything. 🙂 You're great at restoration, so that makes up for the welding. 😉

Best welder ever... man i already have respect for you using a stick welder. I dont touch those so its fine if ur weld holds man nice job

@torvusjunction

Жыл бұрын

Haha thank you, I appreciate the comment! Yes I still have a lot to learn.

@JeremySharpSMSG

Жыл бұрын

@@torvusjunction practice makes perfect. Stick welding is more for heavy duty metal. 7018 rod works for most projects

Ótimo vídeo Parabéns 👍

What's the blower speed control from?

This looks cool, but it will but out of commission after 4-8 burns. The iron in the tank will oxidize like crazy, then break apart where the flame hits it with more force. It will be an unfixable pile of rust at that point.

@Pink_Noodle

2 жыл бұрын

Said oxidized iron could be mixed with ground aluminum from cans and then ignited with a sparkler or other magnesium ribbon if you want a heat source for something. Everything can be repurposed somehow

Like Super sonic jet engine..😍👍

I like your videos. You are 10 times the welder I am bru. I thought for an instant that you had passed the melting point of steel when the paint burned off 🤦🏼‍♂️🤦🏼‍♂️😅

@torvusjunction

Жыл бұрын

The paint burning off was pretty cool.

Aaaaahhh, another "grinder and paint" welder lol. Makes me feel better about myself; not because I have any amount of bragable skill, just that I'm not alone haha. I'm going to build one of these as soon as I find a blower. That's the last part I need.

@torvusjunction

2 жыл бұрын

Oh my welding is absolutely abysmal I can confidently admit to that hahahaha Its a real fun project, you wont regret it.

Formidável; simplíssimo!

You should try putting waste oil into your plastic distillation system

If you can optimize your product from your diesel distiller you should have no issue running a diesel generator with it.

If u drilling metal try putting a drop of oil and just go at a slow speed u should get about 1 inch long shavings coming off

Cool. How many welding rods did you use if I may ask?😅

@torvusjunction

Жыл бұрын

way too many hahaha, I was bad at welding back then. I am still bad, but not that bad.

Just as good as Oil Burners originals. I take it this is where you got the inspiration from?

@torvusjunction

2 жыл бұрын

Good day fellas, HOW THE DEVIL ARE YOU! hahahaha yes, he inspired me to do this, and its so much fun!

Waste oil tends to come with other impurities, like simple green, and sometimes small pieces of trash, and I say that having used to work on big boats with big engines. What temperature does the fire burn at, and is it hot enough to decompose any impurities (bits of plastic and soap)?

@torvusjunction

Жыл бұрын

What temperature? freaking hot haha. It is more than hot enough to melt copper. So i'd day hot enough.

Bet you could use this to heat up the pyrolysis reactor.

Not bad

What’s your lighter called and what fuel do you use?

Great 👍 But I think yo have to made the fuel making Prozess a little bit more efficient, it was nearly perfect but when you make it under pressure and put all the oxygen out of the system with co2 then I bet you get better results ( excuse my English, I’m German and that’s 👈 a Corsa and not a Nova 🤪)

@pejtexx

2 жыл бұрын

Oh, btw, you can also try to Destillate it back to useful oil

Wow that thing sure is impressive! I wonder what the applications of this are. Home heating perhaps?

@torvusjunction

2 жыл бұрын

Anything that needs a lot of heat.

@danc101

2 жыл бұрын

@@torvusjunction lol it sure does create a lot of heat 🔥 you should check out the channel Gerry's DIY. He does a lot of stuff with waste oil burners specifically oil fueled heating stoves

Owesome build....is this gud for melting brass ??

@torvusjunction

Жыл бұрын

I have melted copper wires with it, but not brass yet. Working on a proper burner at the moment.

Will you be putting all that output energy to good use?

@torvusjunction

2 жыл бұрын

Yes, absolutely, busy planning upgrading my shed. I have some big plans for the channel.

This is awesome, is there any other way to make use of old engine oil?

@nigelmack8238

2 жыл бұрын

Bio diesel

@AS-ug2vq

2 жыл бұрын

If you thin it out with gasoline, it can be used in old diesel engine.

@glumpy10

2 жыл бұрын

@@nigelmack8238 You need Vegetable oil for Bio Diesel. Engine oil will NOT work.

@nigelmack8238

2 жыл бұрын

Oh. Good to know

@terryfromsouthcarolina4601

2 жыл бұрын

Thin it down and paint or dip wood into it for weather proofing and insect resistance. Dip and soak small pieces of kindling for cheap firestarter sticks. If using as a wood preservative be mindful to keep fire away for a few days :) :D !

waste oil burner haha no, you made a freaking jet engine lol.

@mountain177

2 жыл бұрын

This just gave me an idea.... put a turnocharger on it.

°C ?

@torvusjunction

6 ай бұрын

No idea but it has to be at least 800 to 1000.

What is the point of this ? I probably stinks like a bastard costs electric to run and will probably melt the tank , Bloody ridiculous

@spencerchristie4000

Жыл бұрын

Bit of proof of concept, could be used in a pinch and the people that would need something like this can cut and weld it up in a matter of hours. Few things my limited brain could see I could hook this up if I needed to make a makeshift forge and straighten a piece of an old frame or something Feed some wet material that needs burned asap at it Heat a big boiler You could use alternate oils as well as reduce the air output to make the life of the metal and oil go further. You could also find a cast iron tank and just drill/torch the same set up using a tapered pipe and distillers paste for torched, and if you have a tap and die you could drill and thread everything.

@michaelsimpson9779

Жыл бұрын

Bugger all electricity to run that, once the paints gone, that oil is burning so hot, the flame's really clean. Bugger all smell. A waste product is being used to produce massive amounts of heat, people use these for foundry and blacksmithing projects, better than paying an arm and a leg for LPG......