Absolutely sick edit my dude

Great points man!! I enjoy all your videos! Decal change I also notice?

@logan-taylor

Жыл бұрын

thanks man!! and yep, updates on the vinyl wrap will come soon, working on a couple ideas!

I put the front 250 Rippin Moto floating rotors on my 2023 Sting R MX4. Rode about 100 trail miles so far and I like them! The difference in braking performance is subtle, but noticeable. They do have much less fade on long downhills though. If you're looking for that final boss upgrade, this is it. I pair them with Shimano H03A (resin) pads for the best performance.

@logan-taylor

Жыл бұрын

awesome setup! those are great pads - for me the reduction in fade was substantial too. I’m running mine with TRP DHR evos now because they’re made for the wider rotors - unbelievable package

@MoxyDave

Жыл бұрын

@@logan-taylor When you say "wider rotors", are you talking about the thickness of the rotor or the inner vs outer diameter? My stock Talaria rotors are 2.3mm just like the Rippin Moto ones ... Great videos BTW!

@logan-taylor

Жыл бұрын

**thickness, not sure why i wrote “wide” haha. Sting R’s brakes are soooo much better than the surrons it’s crazy. And thank you!

@Inventi0ns

6 ай бұрын

Have you tried HO3C pads? I ran the H03As up front for a few months and preferred them over the stock pads. However, recently just switched to the Ho3c pads and like them a lot more.

@MoxyDave

6 ай бұрын

@@Inventi0ns I use H03C on the rear :-)

Hey, I just got the front one in and I’m having trouble putting on the front caliper with the extension. Please help me.

every vehicle u have has a name😭😭😭 love your channel

@logan-taylor

11 ай бұрын

thanks bro 🫡

I have a Wallke H6MAX folding Ebike that comes stock on 203mm Rotors.. it’s a 20x4 wheel and the total weight is about 100-110 pounds. Can I use these rotors on my bike would they be compatible??? My bike also has 6 bolt rotors

Your videos are awesome! New subscriber here 👋🏼 I’m wondering if I can put this kit on the eride pro SS? Do you know?

Where can you buy one of the surrons

At some point the weight gets heavier if that matters to you and it will hit obsticles easier. Also the amount of pistons plays a large factor also. I run larger rotors on the front than the rear since your weight shifts to the front during braking and requires more stopping power than the rear. Just got the 220mm Maguras for my Grizzly :)

@logan-taylor

Жыл бұрын

The meguras are sick! And true - those are all factors. I think they sell just the front kit of these, which is probably more than enough for most bikes. But for long & repeated wheelies, a huge rear rotor just helps me keep heat under control :)

@LesFishingMoreCatching

Жыл бұрын

@@logan-taylor yeah my Grizzly can’t wheelie with that heavy front hub motor. I haven’t seen anyone do one lol. Maybe I’ll stand on the pegs and try lol. I did swap my brake lines so the left is rear.

@logan-taylor

Жыл бұрын

@@LesFishingMoreCatching dude DO IT!!! That would be so sick, I bet you could just grab some nice pegs on Amazon and be the first Grizzly wheelie god!!

@LesFishingMoreCatching

Жыл бұрын

@@logan-taylor lol it comes with fold out pegs for a rear passenger I think those will do I hope haha

Does the full kit come with rotor bolts?

Nice bro!! 🔥

@logan-taylor

Жыл бұрын

thanks g!

When your brakes lock your tires loose nearly all grip and you become less stable. This is why ABS exist. There is no reason to increase brake performance without increasing grip as you are just putting yourself at risk especially in emergencys where you will panic brake. If you want to reduce brake fade you want a thicker rotor or something that dissopates heat faster.

@logan-taylor

Жыл бұрын

correct - these are thicker and dissipate heat better, but they never lock up unexpectedly for me. I think it’s a good idea for anyone with a bike to practice emergency braking on different surfaces so they understand how the brakes react.

@johnbrown562

Жыл бұрын

Yea but if you have ever ridden a surron you'll know that your never locking your front tire up on pavement. I have sram code r's and these 250mm rotors and still haven't locked my front wheel on pavement. Even on dry dirt trails it is hard to lock up the front wheels

@johnfillups4484

Жыл бұрын

@@johnbrown562 I do ride a surron. I rid one right into someone who cut me off while I was going 40. I don't know if my front locked up for sure but my rear did on good pavement.

@je7647

11 ай бұрын

@@johnbrown562 its possible on rocky surface to lock up the front but yes its rare

@YT-Ozymandias

6 ай бұрын

​@@johnfillups4484 skill issue

OMFG THATS THE AIR BUD COURT!!!

Dude you make some 🔥videos. Wont be long before you pop off.

@logan-taylor

Жыл бұрын

I appreciate it so much bro 🫡

is it worth it to upgrade rear from 220 or just front? on a talaria

So quick question do you have to upgrade your calipers to fit the rotor thickness? Or can you run the stock calipers with a different pad to fit the rotor?

@logan-taylor

10 ай бұрын

I believe you can run stock calipers, but I'm not 100% sure because stock rotors are 1.8mm if i'm not mistaken. There might be a small amount of pad rub, so I'd just prepare for that possibility haha

Great video

@logan-taylor

Жыл бұрын

thank you 🙏

just ordered hope tech brakes for my ron can io get this rotor to work on my bike

@logan-taylor

Жыл бұрын

possibly - these rotors may be a bit too thick, so your pads might rub. But if they work with Hope's 2.3mm thick rotors then they'll probably work just fine!!

are you running stock brakes with the 250 rotors?

@logan-taylor

9 ай бұрын

i know they’re supposed to work with stock rotors, but i ran them with Avid Code R’s and now i’m running TRP DHR evos!

When are we ganna see more full videos

@logan-taylor

8 ай бұрын

very soon

1:06 to save pads 😅 50km a day 5/7 all year long for me

@logan-taylor

Жыл бұрын

that’s another reason i didn’t include, great point

Do they work on the talria xxx

@cezin6771

Ай бұрын

yes u have to pick the talaria version

Epic

@logan-taylor

Жыл бұрын

🫡

so sick do you think these work on my talaria xxx

@logan-taylor

Жыл бұрын

the front probably will but I would double check with rippin moto! The rear is a different bolt pattern, so i’d recommend emailing rippin to see if there’s a way to make it work

just a warning: ripping moto sells these in non-floating style for cheap... and they are dangerously unsafe. They warp badly when they get warm and push the pads back into the calipers, leading the lever to go to the bar next time you pull it. Me and others have had this issue, I was lucky enough to catch onto this early, but someone looped out and had a bad crash. Super unsafe, super sus. Im sure the floating rotors are fine though

@logan-taylor

Жыл бұрын

oh no!! Rippin actually just emailed me last week that they removed the old style and are no longer selling it, so I guess that’s why. I had heard about slight warping with the old style (hence the new floating design + increased thickness) but didn’t know it was that bad - that’s awful. so far i’ve gotten no warping or issues with these, but i check all the grommets pretty frequently to make sure nothing is loosening up. I’m glad they’re no longer selling the non-floating version, I hope everyone’s doing okay who crashed - really scary.

You haven’t posted recently hopefully it’s because there’s a big project or something 😅😅

@logan-taylor

Жыл бұрын

hahaha yes, projects and I injured myself, so there’s a video coming about that :)

where the e36 at? :(

@36aidan

Жыл бұрын

content at*

becareful of those dogs, almost got my leg amputated due to one, was a real small one and was fine but totally owned me like a missile

Lol my razor uses 180/190mm rotors and calipers from a crf50

@logan-taylor

Жыл бұрын

that’s a sick upgrade TBH

@MooseRidez

Жыл бұрын

@@logan-taylor no more sketchy mtb hydros lmao

What kind of blue jeans are those?

@logan-taylor

Жыл бұрын

A&F 90’s loose!

@manasseh7

Жыл бұрын

@@logan-taylor my guy good looks jeans look sick thought they were Levi’s , wheelies on point too

@logan-taylor

Жыл бұрын

🫡🤝

Ravenna

@logan-taylor

Жыл бұрын

you should be a detective

i tried to msg u on insta i need help with sx 500 pls help me

bro needs an action camera upgrade

@logan-taylor

Жыл бұрын

Insta360 > gopro any day of the week 🤝 but yes audio was garbo, i butchered the settings haha it’s fixed now