I'm a locksmith, I use these as my third attempt to gain entry, and find that they usually do the job. Very good quality for the price.

@codyclem7146

Жыл бұрын

Whats your first and second?

@riskyrulo8263

Жыл бұрын

@@codyclem7146 Plastic shim is 1st depending on the gap, Lishi is next, again depending on if the lock is on the right side or left side and you have visibility to read it, then the "try-out" keys.

@pablooskibar4843

3 ай бұрын

@@codyclem7146 your a liar true locksmiths just drill yo shit out and charge you $600 in total plus a 10% discount because we are mr "nice guy"

Our exterior locks haven't been used in so long, the pins have rusted in the cylinder, and the springs probably don't even spring anymore thus making them impervious to non destructive entry. This is the future of security, other than clamores. Claymores are always the better option.

@RASAllusion

2 жыл бұрын

That pesky darned brass rust!! Grrr!

@bribbripnairbnab7301

2 жыл бұрын

@@RASAllusion Worse than ferrous rust?

@bribbripnairbnab7301

2 жыл бұрын

"impervious to non destructive entry." AKA a wall.

@RASAllusion

2 жыл бұрын

@@bribbripnairbnab7301 shhhh thats a production trade secret for my gazillion dollar brass magnet! 🤣😂

@LockNoob

2 жыл бұрын

Lol

These should be considered as highly specialized rakes. It would be interesting to know if these can actually open locks with real security pins. The raking behavior is the reason why 48 keys are enough.

@LockNoob

Жыл бұрын

That Abus had spool pins

@riskyrulo8263

Жыл бұрын

The newer Lockwood 201's have spool pins, these keys open them with ease.

Had my set for ages before I actually decided to play with them. But they do actually work and have also worked on some 6 pin locks. So far I have managed to open many ERA, TSS, MAXUS, SKS and YALE cylinders plus others. And as you stated the profiles really do not have to match to actually open locks. It is all about the wriggle/jiggle in the lock while applying light tension. They can come in handy.

This set could provide a bit of fun. 100% agree with your assessment, and enjoyed your video.

@LockNoob

2 жыл бұрын

Thanks 🙏

While I love the challenge of SPP a lock open, I also love all things to do with opening a lock without its actual key. I'll definitely purchase a set of these when I have the money to pay for them. As always, love your videos and thanks for posting, Lock Noob!

@LockNoob

2 жыл бұрын

These I find fun, but mostly useless

Wow-I knew that my door locks aren't anything special, but I definitely saw (as best as my optical calipers are working) a try-out key with more or less my biting!! No, I won't tell you which one!!

@LockNoob

Жыл бұрын

Lol 😁

I just got a set of these. They may come in handy for opening some locks if I do not want to use picking or bumping. I am starting a mobile locksmith service for lockouts and rekeying. We have one locksmith in town and he is older and does not want to do the house calls. He has a nice shop though. Even if they are no good, they are pretty cool.

I love this type of thing!!! The best way to find your key is to take your house number, divide by two and add four . Then drop the last two digits and that is your key!!! 🤣 Great stuff!!! 🐈🐾🐈‍⬛🐾🇬🇧🍻

@LockNoob

2 жыл бұрын

lol

@fauxque5057

2 жыл бұрын

It's easier to look under the mat, or in the potted plant

I haven’t read all of the comments, however, there is a booklet called lock pick design and engineering which is worth a read. The author talks about probing the lock to establish some if not all the key cut depths, or at least to estimate them. This procedure could save time ,instead of trying out all the variants, you would have an idea which were the likely keys. Another idea is real off the flat pieces on the keys and insert a tension tool, this will give each key more “rockability “ if you get what I am saying. Mike

@dovos8572

2 жыл бұрын

well single bit picking is still faster and even if you aren't good at it, there are lock decoder picks that have the bitting scale and position marked on them and you just have to single pick it with the help of the scale. you don't even have to know how deep or shallow you are lifting the pin because the scale is telling you everything and after you picked it you can read out the numbers while having the lock rotated half way, so you can make yourself a second key after picking it once.

@LockNoob

Жыл бұрын

Cool!

The world's most elaborate city rake set. 🤣

@damienheitzer8712

2 жыл бұрын

For real. As Ash was flipping thru them exactly what I was thinking.

@LockNoob

2 жыл бұрын

Yeah lol

A less infinite library of babel. In theory you can make a collection of keys that will open 99% of all locks on the planet. This will be a massive collection of skeleton keys, tumbler keys in any made pinout, tumbler keys, dimple keys, car keys, etc. It won’t be practical but it would be cool to say to everyone you meet that you have a copy of all of their keys.

@LockNoob

Жыл бұрын

👍

Tryouts definitely need to be for the lock you’re opening not just generic. Kwikset smartkey system is one of the best to use them for but there’s still 253 keys to try.

@LockNoob

2 жыл бұрын

253 isn’t that many tbh

@canoepick1140

2 жыл бұрын

@@LockNoob it’s not, nor is it expensive to cut them if you have the equipment, that’s why a lot of locksmiths have them. A decoder is around the same price as buying one a tryout set and even more useful though.

@rmsg7504

2 жыл бұрын

I never got that Aero set KW1 to ever work once so I sold it 254 keys takes a long time anyway

@canoepick1140

2 жыл бұрын

@@rmsg7504 I have no idea on the quality of that one I know you can do the work to cut a good set and they’re jigglers but smiths I’ve worked with get 90% or more success with them. It’s just math to learn the bittings you need and going in between two bittings so you can hit either with some wiggling. I’ve even got a theory in a flat metal set like these I want to build. But it will be worked out with a fellow smith first. The math seems to check out I just gotta get some other opinions. If I’m right it could reduce the differs even further. I’m betting I’m missing something though lol.

@rmsg7504

2 жыл бұрын

@@canoepick1140 I had zero luck. I know you can cut them yourself on a 1200 or a framon, the key cut list is out there. Supposedly, that set is better. However if you can pick a lock, the tryout keys for KW1 are almost a waste of time. The only way I can see their value is if you have a SmartKey lock on a tool box or a digital lock that you cannot easily or without damage pull the cylinder to use a reset cradle. In almost 17 years I've only picked 3-4 SmartKey locks in the wild. Or of course if the user can't pick a KW1. There is also a 32 key tryout set you can make which I actually did. It has worked twice ever. Too heavy to carry around and faster to pick, bump, bypass, or drill. Even a crappy manual pick gun works better than the tryout key sets I've tried for KW1. That's just me, I do have a few guys I know that claim they work for them. I just haven't seen it with my own eyes. I think these keys in this video look MORE promising.

I ordered these recently and still waiting on them and just happened to come across this video. Awesome! Can't wait to get em. Thanks buddy.

fun to see 🤩 I got exactly the same keys in the mailbox today, but haven't tested them yet, so thank you for yet another great video 🙂👍

@LockNoob

2 жыл бұрын

Thanks! Let me know what you think

Im a sucker for having jigglers and tryout keys so for the cost of £23 shipped I had to grab a set, Thanks for the video and link Bro..🙂

@LockNoob

2 жыл бұрын

As long as you are aware of their shortcomings they are fun!

A handy set of rakes.

@LockNoob

2 жыл бұрын

They could be

I find any tool for lock opening interesting. The average citizen doesn't realize that the average locksmith probably can't pick a decent lock; instead they use try-out keys, maybe some rakes, then they grab the drill or core puller to get on with things 🤬 It's useful in a toolkit for non-destructive work, and of course the more tools you have the more impressed the customer is 😁 And we can never have too many 'toys' can we? 😅

@anekroth

2 жыл бұрын

Haha I don't know man, I think I may have gone a little mad with all these lock 'toys', possibly even crossing the threshold into obsession. It all started 3 or 4 years ago when I bought a cheap set of Goso picks off AliExpress out of passing curiosity, and it all spiraled out of control after that. I have accumulated so much lock related stuff its kind of nuts. It has progressed well beyond locksport at this point. I have an example... A few months ago my dad stops by my house and hands me a padlock and tells me he lost the key. He wanted to know if I knew how to make a new key for it. It was a 6 pin Best SFIC core with a Schlage E keyway mounted in a 50mm brass Master Lock body. I said 'sure dad, no problem'. I picked it to control and removed the core, took the core apart, identified the bittings, then cleaned and reassembled. I then made the keys for control, master, and sub-master AND while I was at it also made him a second brand new lock pinned exactly like the original. I had all the stuff I needed for this just lying around. I'm not even a lock smith, I'm just a guy with a weird hobby.

@LockNoob

2 жыл бұрын

I think there is nothing wrong with buying stuff like this if it’s fun and you can afford it

@P_RO_

2 жыл бұрын

@@anekroth Lol, I know what you mean. I'm also a 'radio nut' and saw a 'novelty' shaped radio I'd always wanted on Ebay 20+ years ago so I grabbed it. After some browsing I found another, then another. I realized there's thousands of these so if I were going to do a collection I should settle on a single theme. That done the mania developed and I now have at least the third largest collection of "round" radios in the world at a cost I'd love to recover but can't as the market ain't there anymore 🥺 All in boxes now, mania and hobby over, the one most desirable and rare radio of this genre is so rare and pricey I'll never have it, and that's about the only further accomplishment I can make here. I don't regret my interest and a few of my buys, but I regret the obsession and the time and money spent on most of this and if there's any good to be found, it is that I have now learned to avoid collecting for collection sake, because I can't deal with that well 😑 I'll never have a bunch of locks because of that. I can't let me start going there. It's as bad for me as my addictions were and like them it has to be a total ending or there WILL be a restart and no stopping from that point onward. If it's not hurting you or anyone and it gives you pleasure that's great- do as you please. But going too crazy with anything can change a good thing into one that's bad for you, so always be aware and re-assess your self from time to time. And have fun 😁

@anekroth

2 жыл бұрын

@@LockNoob Yeah totally agree. Its a pretty great hobby, and the skill sets can be genuinely useful sometimes. Btw, some Lock Noob fellow went and designed some new stuff with Multipick and now my Elite collection isn't complete anymore. I think I may need to add a few new items to my collection soon lol.

@sciguy98

Жыл бұрын

Most of us Locksmiths don't have time to waste with SPP, unfortunately. I would love to pick more locks, but when it's pouring rain and freezing outside, the customer just wants in ASAP and picking is the slowest nondestructive entry method.

Looks like a quality set and affordable price. Thank you for sharing.

@LockNoob

2 жыл бұрын

Thanks 🙏

Wanted to come back to this video to tell you I got this set and so far I got two locks opened.

If I had a choice between all of these and one decent Bogota - I wouldn't be taking these. Interesting video as usual. Nice one.

@LockNoob

Жыл бұрын

I agree with you

I recommend reordering based on the #1 pin cut because that's the one you often can see and guestimate the depth. In addition, shorting the upper part to 3mm longer than the shoulder should help for tighter keyways and not slipping when jiggle thou. Have you tested using to at once and slide them against each other to gain more combinations i time ?

@LockNoob

2 жыл бұрын

I’ve not tried 2… might work

It would be great if they had the # that were more likely to work with specific companies like: 1-5 Master, 6-10 Schlage, or 11-15 Abus. A cheat sheet would come in handy.

@LockNoob

2 жыл бұрын

And 6 pin versions too

@riskyrulo8263

Жыл бұрын

@@LockNoob 6 pin would be very handy.

Weeellll... I installed multilock dimple locks. So not my house. But definitely my neighbors

@LockNoob

2 жыл бұрын

I love picking multilocks

They look really fun but I'm going to try and master the old methods before I start looking for shortcuts.

@LockNoob

2 жыл бұрын

Definitely

I personally would suggest getting a Lishi tool over any set of multi jigglers.. but each to their own

@LockNoob

2 жыл бұрын

Yes, hard to argue with that

Great to see you took the filming studio to the beach with you ;)

@LockNoob

Жыл бұрын

Lol

I think these are probably useful for long term red teaming. I.e. if you can't pick a lock, but can do 1 tryout a day. In roughly 2 months you can go through all of them without raising too much suspicion.

Aliexpress seem to send you offers if you add something to your basket several times and then leave it there for a couple of months... at least it has for me. If you are not in a rush it's a good way to get offers, most recently I bought a crossbow that way and it came down from £200 to £60.

Interesting concept, kind of like key rakes? Pretty cool😎

@LockNoob

2 жыл бұрын

Sort of but jiggler is it’s category

I’ve been looking at those. I just haven’t ordered them yet. I find things like this interesting.

@LockNoob

2 жыл бұрын

Me too!

LOL loved the intro 👌 Fun gimmick and great to hear your thoughts on these 👍 I would be tempted to buy them if I saw them cheap out of curiosity, but now having seen your video I guess my curiosity is satisfied already 🤪 Thanks for the fun video, cheers 🍻

@LockNoob

2 жыл бұрын

Cheers!

The kw1 lishi does the same but only one tool instead of a big ring of keys lol I call it the grand grand master key

@LockNoob

2 жыл бұрын

Yup, a good choice

I got some for similar reasons, just to see, figured they may be a reasonable material for making some rakes if they were rubbish. Had some success with them but am undecided also. Looking forward to others feedback.

@LockNoob

2 жыл бұрын

Yeah, they are OK and a bit of fun but not great

You don’t need every possible permutation because they aren’t all in spec for the a particular system. For example an important limitation is the maximum distance pin heights can be apart from each other. So mathematically a 0 9 0 cut could be made but outside of challenge locks they’re considered out of spec and you don’t need a tryout for that cut series in any position. This and other considerations reduce the number of tryouts you actually need to be much lower than the math suggests.

@robertboudrie2234

2 жыл бұрын

Although "0" is a legit cut on a Schlage key, you will never see that in factory bitting.

@honestlocksmith5428

2 жыл бұрын

@@robertboudrie2234 Actually, I always buy 0 bitted locks.

@sciguy98

Жыл бұрын

@@robertboudrie2234 I see 0's on factory keys all the time, especially 6 pin commercial cylinders, including from Allegion. More to your point, though, they don't need to sweep the whole range for Schlage because their own tolerance spec assumes that being off by .023" should still meet the sheer line, and the cut specifications are only .015" between cut depths. A 25942 should, with a bit of jiggle, operate a cylinder pinned to 34851, which is why Schlage requires two step mastering.

@robertboudrie2234

Жыл бұрын

@@sciguy98 I've only heard of the "No zeros" in relation to factory bitted off the shelf cylinders for the consumer marked (the "C" keyway)

Just purchased them. Waiting for the long slow shipping from China

@LockNoob

Жыл бұрын

Cool, I think they are fun if not massively useful

You should use a torsion wrench when using these to actually turn the cylinder

@LockNoob

Жыл бұрын

If there is room, definitely

They would be fun to play with.

@LockNoob

2 жыл бұрын

They are!

I so these keys on line the other day....and thought to just cut the tension part off, and then use my Tension Rench and BAAAAAM!!!

Just what I need. Iv lost the keys to one of my garages, and don't fancy drilling the barrel out.

I have a set of 10. And I find lots of times the simplest one is the most effective

When I interned at a locksmith, I opened 5 and 6 pin locks faster with just a pick and a strip of "film" ... Takes only a few sec to lift the pins and push in the strip. Yes you need access to the back of the lock to use the film strip method. The locksmiths would "just" use a "knock key" and the end of a screwdriver.. 1 max 3 knocks and the lock open... So I totally agree with you, they are more gimmick than useful..

@LockNoob

Жыл бұрын

Yup

Yep another thumb up from me, haha reminds me to go shopping soon, I may skip on these as want to play a bit with bumpkeys first... Nice video as usual.

@LockNoob

2 жыл бұрын

Bumpkeys can be fun

Great video Ash mate very interesting 🇬🇧😊😎👊👍

@LockNoob

2 жыл бұрын

Thanks Leon!

The key that wouldn't work is because the middle cuts were too high. The one that worked the first pins were lower so when you giggled it lifted the front pins

@LockNoob

Жыл бұрын

👍

And I do have Residencial Gigglers that I use with a Tentioner!...BUT I think this will be amazing upgrade!! It would work GREAT for Smart Key Technology 🔑

Its easy when you can check the original key shape, and just take a similar.

Good video and you made the comment I was going to post obsolete at the end!

@LockNoob

Жыл бұрын

Thanks 🙏

looks like sore fingers to me ;), thanks for sharing, they do look great

@LockNoob

Жыл бұрын

Yeah pretty sore after trying so many keys. So much quicker to just pick lol

Ooh! Nice fingerprints! I wonder if that would let us unlock your phone? 🤣

Interesting Set. If there was a 6 pin set I would consider.

@LockNoob

2 жыл бұрын

It’s a shame they are only for the 5 pin locks

not sure it will also set the 10 sidebar pins on my ruko garant plus, and the 6th pin might also be bad for those keys. they might also not work with UK lever style locks.

@NoctisMotus

2 жыл бұрын

hehe, guessing the protecs here will be fine also. probably the bilock and the twins will be okay as well.

@LockNoob

2 жыл бұрын

No, they definitely work with the Protec 2 😄

@RuneInternational

2 жыл бұрын

@@LockNoob please show that in your next live

@LockNoob

2 жыл бұрын

I do need to do a live soon actually

I would get them to have a mess.. I like trying out things if they are not expensive and different… who knows.. I have seen them on Ali as well. Thanks for sharing, take care ⭐️

@LockNoob

Жыл бұрын

You too!

I'm with you Ash, even items that may be considered "gimmicky", I still enjoy checking them out on the chance that they could be effective, or that I could possibly find them useful for a purpose other than intended. Its all part of the fun 🤷🏻‍♂️👍🤷🏻‍♂️👍

@LockNoob

2 жыл бұрын

Agreed!!

@magenlin

Жыл бұрын

Totally part of the fun. Especially like you said when it's for something else. Like "oh I have the perfect thing for this" and it one of those things like who cares if it breaks as long as it does the job first. It's always fun to save the day

Just bought a set from Amazon. It had only 30 keys instead of the 48 advertised.

😎thanks for sharing. 😎

@LockNoob

2 жыл бұрын

Thanks

Ooh, this looks like it could be neat. Guess we'll find out

@LockNoob

2 жыл бұрын

What did you think?

@chrism4008

2 жыл бұрын

@@LockNoob I thought they were pretty cool! Could be a fun thing to have kicking around

I think they are interesting. I really like the channel. Got into lock 🔐 picking because of my brother. He was friends with someone who owns a business.

hmmm, looks like these wont work on my door, since my door has a DIMPLE LOCK.

Looks like they actually put some thought into it with the cut down the middle.

@LockNoob

2 жыл бұрын

I quite like the design

I'm with you... love the stuff too!

@LockNoob

2 жыл бұрын

👍👍👍

Im a younger boy just getting into lock picking as a hobby. I had someone steal my cheap set of lock picks so now I only have 1 curved pick. I wish I could afford some clear locks to help with practice and even a set of these keys or lock picks again 😔

11.35min might be a master key. That's why it can open even though the key cut is different.

Very interesting video Not sure if you want to make this sort of video but some of my favorite videos from bosnianbill were his "junk" video and I think getting some of the super awful tools could make some interesting content Great video as always 👍

@LockNoob

2 жыл бұрын

I shy away from calling things outright junk as some cheap pick sets are all some people can afford and often will get you into a few locks even if they aren’t perfect

@NomadicHacker.

2 жыл бұрын

@@LockNoob I sincerely commented your positive attitude 👍 thanks for sharing your perspective on this. Much appreciated

Nice, my school only has these.

Great, but have you a function Link for this Keys ?

Abus is what Walmart uses haha

@LockNoob

Жыл бұрын

Cool!

Awesome video!!

@LockNoob

Жыл бұрын

Thanks 😊

Good for a bit of fun I would say but that's about it. I will say this though 🤔Is this where you got your idea from for your latest project with Sparrows? You know the break off key and tension tool. If it is it's great thinking.

@LockNoob

2 жыл бұрын

No, though I can sort of see the similarities. The problem with lock picking, is when you break it down, all the tools sorta work the same way…

@roysammons2445

2 жыл бұрын

@@LockNoob You have a very good point sir 🙂👍🏻

I really like stuff like this... jigglers, sparrows coffin keys etc. Defo getting a set

@LockNoob

2 жыл бұрын

They are fun, but not super useful imo

@lloyd1934

2 жыл бұрын

@@LockNoob I have another question if that is okay, what are the devices called for extracting cores from eurocylinders and prevent the driver pins and springs being ejected while you have the core removed?

Thank you very much for this demo! I have been curious about these for quite a while. I have a set of 21 tryout jigglers (a ring of 10 and a ring of 11) I bought from HUK lockpick, but have never tried. I forget the price, but must have been cheap or I wouldn't have them. I have a different opinion of them than you. I think they are a useless gimmick for lock pickers like us. The only real use I can think of is for a thief with no lock picking skill. But they do make a mild conversation piece for someone interested in unauthorised entry.

@LockNoob

2 жыл бұрын

I don’t particularly rate these as a useful tool… but they are made pretty well for what they are and I did have fun with them. Wouldn’t recommend for a hobbyist

"I have the key to your door... IF the bitting is right." Well yes, that' how keys work.

@LockNoob

Жыл бұрын

Exactly! Glad we are on the same page 😁

it looks like you could stack them to make different keys.

After you demoed them I think they are just junk. However you did a wonderful job describing them and demoing them. I think it could take you longer trying to use them and you may miss the one that would have worked. Thank you so much for going through the effort. I think they were worth it for you as it gave you a good video and it saves all your viewers from having false impressions of them.

@LockNoob

Жыл бұрын

Thanks 😊

$36 USD so I ordered a set. could be pretty useful! Thanks for the video!

@LockNoob

Жыл бұрын

Thanks 🙏

Question: did anyone consider snapping off the straight edge to allow for more jiggling in more profiles??

@LockNoob

Жыл бұрын

You could and use a tension tool as someone else said

Lockpicking Lawyer, 2.0... UK style :D

@LockNoob

Жыл бұрын

You know we’ve done a vid together?

@soldjahboy

Жыл бұрын

@@LockNoob Actually, no I did not. I will have to find it... I literally just found your channel. Fastest subscription I think I've ever done :D

What about double sided wafer locks?

Same you can order car keys This way you can open cars .

Excellent video 😁

just jigglers baisicly good idea though

@LockNoob

Жыл бұрын

Yeah

Do the keys work on cars? Or rather is there a set for cars. I am trying to learn car lock smithing and the chip's key to start a small business. So please let me know

@LockNoob

Жыл бұрын

There are car jugglers too

One weakness: Our Home address lol

@LockNoob

Жыл бұрын

Lol

you could stick one of those in someones door and snap it off so they have to get it out in order to open the door

32,768 different possible combos I believe

"I have the key to your house!" > (Chuckles in Abloy with a custom profile accent)

@LockNoob

2 жыл бұрын

(Laughs in core puller) 😉

@RouteBGP

2 жыл бұрын

@@LockNoob (Squeaky voice) They are a bit fragile

@RouteBGP

2 жыл бұрын

@@LockNoob You should have seen the look on my face when Bosnian Bill just core dumped one with a bolt.. :)

My house lock is more of a rectangular shape from abloy

I know what you mean about wanting them. They are high quality, except maybe they could have chosen a thicker grade steel.. Or does the flexure improve chances of picking?

@LockNoob

Жыл бұрын

I think the thinness allows for more movement in the lock and more chances for an open

@martinda7446

Жыл бұрын

@@LockNoob Thanks Mr Noob 😁, I guess its a reasonable compromise.

A lock puller is good or c4 or a battering ram

wouldnt it make more sense to cut off the flat parts of these, smooth over the pointed parts of the bittings and then use them with a tension tool as rakes?

@LockNoob

Жыл бұрын

Maybe!

Where can you purchase this product?

I randomly discovered these after LPL did his video on the Sowoyoo lever lock pick. We'll see if they're Chinese garbage or not if they ever show up.

@LockNoob

Жыл бұрын

Let me know

Seems like you could eliminate all that trial and error with a nice rake..I get it was a demo, but I'll stick to my multipick kit thank you.

@LockNoob

2 жыл бұрын

A rake is far better IMO

Infact you have none of my keys😂

@LockNoob

Жыл бұрын

Lol

To help your mate out who`s wife has taken his shed keys to work and that`s where he keeps his lager yes,a very worthy purchase,Only if he doesn`t want her to know,if he doesn`t care just kick the door in lol 😁

Like bump keys

Are they thin enough to stack them and create additional bitting combinations?

@LockNoob

Жыл бұрын

Not quite, sadly

_AliExpress?_ Kinda shocked they didn't just send you the S-ring they come on. Or that you got em at all.

I imagine these would appeal more to a low-skilled burglar than to a highly-skilled locksmith.

@LockNoob

2 жыл бұрын

Even then… I’m not certain

@southerncomfort7490

2 жыл бұрын

Only if the low-skilled burglar was willing to hang around looking very suspicious outside the door for ten-minutes plus.

@FriedPi-mc5yt

2 жыл бұрын

Low skilled burglars use a crowbar or their foot.

@P_RO_

2 жыл бұрын

It's been my experience that few locksmiths are good pickers if they SPP at all. It's not necessary and it doesn't fit the business model of best profits coming from the fastest work. They use try-out keys (good ones) and pick guns, then maybe4 some raking but not on cheap locks/cores like Kwikset and Schlage; those get drilled right away.

@southerncomfort7490

2 жыл бұрын

@@P_RO_ Interesting point. I know that all the locksmiths I know use pick guns.... and use pick guns. That's it. What would you consider good try-out keys (as a matter of interest)?

not sure if you have done a video about pin tumbler jigglers i am sure that would make a great video

@LockNoob

Жыл бұрын

I need to get some!