Bro really built a YF-23 and thought we wouldn’t notice

@vodkabottle3522

5 ай бұрын

more like a J-20

@macparise9215

5 ай бұрын

@@vodkabottle3522 oh shitttt you right

@shadowsavage1014

4 ай бұрын

Had to see if someone said this but I thought the same thing

@macparise9215

4 ай бұрын

@@shadowsavage1014 yea, I’m not quite far enough in warthunder to be able to identify a j20 LMAO

@dabbot1136

4 ай бұрын

Bullpup F-22

Would love to see you design a modern advanced fighter for an alternate universe that doesn't have guided missiles.

@teethpastex

7 ай бұрын

Become-the-missile.kamikaze

@fqeagles21

7 ай бұрын

Laser and Blaster?

@InsanePyroid

5 ай бұрын

ww2 modern fighter jet@@fqeagles21

Much appreciated for your showing off of my BV-01 Robin, I didn't realise it was too tail heavy! Awesome vid dude :D

@youtubeisapublisher6407

7 ай бұрын

Very neat plane, it's like a baby A-10

@tides672

3 ай бұрын

Bro that plane flew amazing

26:10 I suspect it works so well because it's essentially an annular wing.

@yapod9061

4 ай бұрын

There is some advanced engineering in that house.

That Ki-Lano was the first prop plane i made that actually flew. I don't know what you did to that plane to get it that fast, but there was no point in time during the designing of that craft where I wasn't constantly falling out of the sky. Hence the ailerons helping with pitch. I got it to about 300 kph but that was about it. Also the fuel tank in the center of the plane was supposed to simulate about 2000 kg of bombs, if I recall correctly.

@PatchBits

7 ай бұрын

Your propellers were spinning too fast! All you have to do is turn your target RPM down!

@garbagebeans6939

7 ай бұрын

@@PatchBits Oh Sweet, Thank You!!!!

Such delicious irrational anger at the Snoopy.

That tri-engine German concept could make an excellent high altitude long range transport plane , high thrust and high wing surface area , good lift , at high altitude , big wings and drag are no issue , but thrust and engines running out of air is !

Glad you liked my BV p170! I ended up optimising the engines a lot more, but still pretty much just a brick, nice landing!

Furries and Military aviation, my two favorite communities. Thats a sub.

That blue jet looks like a weird upgraded Flanker that they put CFTs and the leading wind edge of a Hornet on.

All I’ve made so far is a couple of shitboxes. They somehow work but they’re shitboxes still.

@dragonosk3168

7 ай бұрын

You roleplaying as Russia or China

@110pLover

7 ай бұрын

😂

@beastmodeofficial1672

6 ай бұрын

I made a F-106 delta dart mixed with an F-104 Star Fighter mixed with the F-22 raptor wings

@navneetkaur4763

6 ай бұрын

Huh, MiGs aren’t my personal favourite, but cool.

@TheOtherAviationGuy

5 ай бұрын

i made a 3rd gen with the turn rate of a brick and a stall speed of 260 knots :)

Every build in this video was great ❤ It would be nice if this was an every Friday thing or every two weeks or something

@artemisthehunter8360

7 ай бұрын

Yessss, i missed this and i would love to get in.

9:10 All I can hear is Jeremy Clarkson yelling "Power!!".

the one that looked like a su27 f18 love child was awesome

Patch what about a series where you diagnose / fix issues with builds that are aeronautically challenged 😂

Cool designs there! I would recommend flying with a joystick or even a gaming controller just for better flight control inputs. That will almost certainly make flying most of these aircraft immensely easier.

Holy shit that last one cracked me up

1:00 That resembles the VX-23 from project wingman, pretty cool "what-if" of the F-22

@gaviantxc8213

4 күн бұрын

I'm pretty sure it's more like the j-20

Sry if scrunglo didn't fly that well, was pretty difficult to get such a tiny aircraft flying well.

For gear bay doors, PAtR showed their way to get them working in the discord, i would link, but youtube and hyperlinks. Basically you set a custom input that lets you delay the gear extension on deployment, and door retraction on stowing which then removes the clipping. For the weapons, Tab will switch between systems, and F with fire them, without firing the guns.

@skoovee

7 ай бұрын

docs.google.com/document/d/1W4CrIiVkIMNtvtbaWCXRX4oCoAz_DTN-jZj5kW6ftsQ/edit?usp=sharing

Wish I knew you were to fly our crafts.. I'd send you my Star Wars -like flying craft... next time... very good job on the vlogging...

(Day 2) Suggestion: A fifth-Gen stealth Air-Superiority fighter, similar to the F22 perhaps you could use the fuselage from you stealth fighter design In 2018(ish) Lockheed Martin proposed an aircraft to the Japan Air Self-Defence Forces for a Fifth-Gen Multi-role Air superiority fighter. The proposal was, in effect, an updated F22 with features and technology from F35 integrated into the design, though the proposal never passed beyond that stage. My 'challenge' to you is as follows... build the bastard love-child of 'Raptor' and 'Lightning II', I believe it would be a fun video, as it would be the most modern aircraft you have built, and the very nature of being stealth affects the shaping of the aircraft,

Your design looks like it'd stall the engines in a turn with those canards in front of the intakes lol

There was a lot of addiction to cocaine in Germany in WW2 - so much so that the Allies referred to it as German Marching Powder.

Rafale-22 isn't real, it can't hurt you Rafale-22:

14:35 First video of yours I've EVER seen, and you come out with this gem less than 15 minutes in 😆 Yes... I shall watch your career with great interest... =p

I don't know if you knew already but the very first jet you show in the video looks exactly like the VX-23 from Project Wingman

I would say the 3rd aircraft is heavily inspired by the su30mk, its basically an su30 that has thrust vectoring

@granola9719

7 ай бұрын

No, I think it's a Nord griphon 1500, a french project in the 50's to 60's to make an ultra fast jet

@sharkk127

7 ай бұрын

@@granola9719 did I miscount then? Or are you counting his aircraft at the beginning, cause I didn't

@granola9719

7 ай бұрын

​@@sharkk127ho, yes I counted it sorry for that😅😅

@beimanuel942

7 ай бұрын

the Su-30SM in question:

@fonesrphunny7242

5 ай бұрын

That's even uglier than the original T-10 prototype or that trash 144 scale model kit from Revell

So far I’ve built something close to an F6F, but it’s a bit slow and not very stable. I’m still trying to figure out how to get the most out of the piston engines.

At 0:45 When He Said Hit That Subscribe Button The Button Lights Up.

Very beautiful designs

1:15 looks suspiciously like project wingman's non trademarked take on the f-22(its just an f22 with canards)

Hehe, look at them go!

I wouldn’t have made a stealth jet with canards if I were you, canards provide a lot of radarcrosssection, which is why they are usually avoided in stealth design. The J20 may use them, but they are reportedly placed at an angle meant to avoid this, but it is much disputed how well that works, let alone how well it works in general as a stealth or even overall design.

Love to see you submiting another flyout video! this was awesome

@PatchBits

6 ай бұрын

There is already a second episode of this out!

@user-qh2fx6kz3y

6 ай бұрын

ok! i'll make sure to watch it@@PatchBits

Red Baron snoopy 🤣

Hey, pilot here! For all the people looking for an explanation as to why the P170 took so long to take off, look no further. The P170 falls under the category of Taildraggers (A plane with two front landing gears, and a single small wheel at the back). These planes are relatively more stable during takeoff, and the design is good because these planes are really front-heavy - as you can probably tell by the THREE prop engines in the P170! But due to its weight distribution, Taildraggers take off in a different way than regular planes. Basically, upon acceleration, the rear of the plane lifts up so the tail is no longer touching the ground. If the plane is designed correctly, it happens on its own. If not, then you manually flare by gently pitching the nose down. This way, the plane is traveling on the runway using only the front landing gears. Once you have enough speed (V2), you can begin to rotate, and the lift from the wings prevent the tail from smacking into the ground. If you try the normal method, since the plane is long and front heavy, you're essentially wasting runway (and fuel) to perform the takeoff. Taildraggers are really fun, especially since they are more manoeuvrable on the ground, however you need to be damn good at runway alignment to takeoff in one of these. Cuz once the tail is up, it's very hard to change course (even with rudder).

Just casually ripping 30g's like it's nothing

The first plane looks like a chubby version of Project Wingman's VX-23, which is just the F-22 with J-20 wing placements

First plane reminds me of the YF-23

You Should do Upgrading your designs in flyout, were you try to improve the crafts shown in this video. #idea #suggestions 👍

@bonkaiblue7906

7 ай бұрын

ps your landing speeds to high revoked pilot license lol

Man i wish i had seen when you sent that out. Ive made 3 pretty cool planes. 1st one which i desighned with the intention of outturning a f22 and denately sucseeded. The other 2 are models. One being of the meteor nf13 And another being the f84. Maybe if you do it again.

I’m surprised the house plane wasn’t going Mach 10

Use TAB to select between missiles and GBU's and F to fire them

Your stealth jet is an f-22 raptor

18:30 looks like Su-27? Dude that thing is a F/A-18 with canards. How do you not see that?

You should do the ultra violette f1000

I want to make an rc version of that snoopy

The blue aircraft gives F-14, F-18 and like sukhoi 35 vibes

I just started playing last week, great game. Wanted to test out the mesh importing, so I grabbed an STL file of the FA-37 Talon from the movie Stealth, chucked it in to Blender, created 2 obj files, one with wings, one without, the idea being I would need to make the wings and I would used the winged model to copy the shape. Also an addition obj of just the canopy because that shape is really weird. Needless to say, movie plane is shit, it does not fly. HOWEVER, make the wing angle straight instead of angled down, add a rear control surface and suddenly it can actually take off and handle well.

Still working on version 2 of my F/A-36 Griffin, mainly flight model

Yeah i want to see more! Where can i send you my stuff?

@PatchBits

7 ай бұрын

I'll be reopening my discord channel for submissions soon

This plane is plane.

I haven't thought about pedestrian jets before until you mentioned your jet didn't have any arms. Are there any companies making 1-2 seat supersonic jets for personal use? Not that i could ever buy one. Or even a normal plane for that matter.

Nord ramjet normally only activate when reaching enought speed with the jet engine, ramjet for the Nord 1500 couldn't work for taking off, landing and acceleration

Hope to see a comcord with moveable nose or a North American X-15

Nice

GG coleson!!

I hope they add a rudimentary online multiplayer function. Peer to Peer, rather than servers.

@PatchBits

5 ай бұрын

I believe it was on a plan at some point, not sure if it's still the plan though.

One looked like an f16 and f18 mated. The one after is definitely a Russianesque type like a mig 29 or a flanker

Can you link the vehicles I want to steal the fly by wire controls too

Im just wondering, how do you download and use an downloaded aircraft in flyout? And if you didnt know, you can press tab to choose armament and press F to fire the missile.

@PatchBits

7 ай бұрын

It's quite the process. You need to download and extract a zipped craft file and place it in appdata/locallow/stonext games/

Can we do this for sprocket?

Is it possible to put fly-out models into a Blender or a 3D model software?

Snoopy wins my vote

The Su-27 looking design looks good and impressive. Lol, I wonder why the flaps didn't break when you're at Mach 1. Also, no airbrakes? :/

is it the controller / the input, or the game issue where the jet constantly swaying up and down whenever you are maneuvering?

I wish I new how to make a jet on flyout. I so have a paper airplane design that I would like tested

noice

I have a really good craft but the problem is My computer’s specs aren’t enough and the game crashes

i saw that red house plane geting build on Discord on a call

@thewonderwaffleofficial

6 ай бұрын

So you were there to see it created… lol

They were on m3th and addys

build a something like a sr71 which goes at least mach 5

patch bits question because of your banner and icon etc not saying you are but just wondering if your a furry or that's just your little mascot?

hi... watching from UA is midnight rn

@noobyd9767

7 ай бұрын

Same here, *but* from Bulgaria!

You could try to make a supersonic prop plane, I know there is one in the world so it must be possible

@themera8921

7 ай бұрын

There isn't one though. The thunderscreech only reaches mach 0.8ish. You need an infinitely long propeller to get it above mach 1

@CDT_Mellion

7 ай бұрын

@@themera8921 oh ok I thought it did

how do you send the files to flyout?

More!

No matter what you come up with, Dr Christmas made a worse plane in reality and had people pay him for it, so I think the community is doing okay.

How do you get that nice smooth surface?

@PatchBits

7 ай бұрын

My jet had the detail turned down low, the sci fi 2 material, and a high smoothness

How do you use community designs? Id like to download designs from others and try them, too!

@PatchBits

7 ай бұрын

I downloaded these from my discord. They save them as .zip files and I put them in the craft folder inside appdata

@MrJp990

7 ай бұрын

@@PatchBits I cant seem to find the flyout folder in my appdata.

@nikolaanicic3944

7 ай бұрын

​@@MrJp990%appdata%/LocalLow/Stonenext Games/Flyout

How can i download other players planes?

my ones barely even fly lol 😭

how do i send my designs? got to play flyout last 2 days

@PatchBits

6 ай бұрын

My discord server!

Bro is him

if you set up a new slider input on the G key with a range of 0-25, default value of 0, gravity of 10, and a sensitivity of 10000000000000... you'll have a signal you can use to trigger a bay door to open long enough for landing gear to deploy. you can use this to hold a given hatch open until the gear is fully retracted, by combining the input with the default landing gear input. Or you can also use this to trigger doors that only need to be open during the extension/retraction process and left closed the rest of the time (like the A320)

How do you download other people’s stuff

@ketminecrabs7721

5 ай бұрын

idk

Oh shit i forgot to submit something for this

How do I shoot a missile in flyout

Video 13 of asking for a Zheifu Patch&Bits Inc. build!

It's so complicated to build in FO

Your jet look like j20 the chines 5gen jet

why does the plane in the beginning have canards if it's stealth

@PatchBits

7 ай бұрын

Cause fun

@nixoproto7545

7 ай бұрын

fair enough

@skoovee

7 ай бұрын

i mean if you were prioritsing rear aspect stealth (dont ask me why you would ever need that or want that) it would be better or just abandon control surfaces and embrace thrust vectoring

How find ur discord, I forgot how to search for servers.

@PatchBits

7 ай бұрын

It's in the description

The ui is very hard to use

can they cobra?

can you not make speed brakes in this game?

@PatchBits

5 ай бұрын

You can!

@rudyrobertson1540

5 ай бұрын

@@PatchBits Thats good to know. I think i'll check this out. look like it will be a little bit nicer on my computer that DCS or MSFS hahaha

Can someone make a mh60 helicopter in fly out I suck

Why do you pronounce mach like that? "mac" (a big mac. or Macdonald) It is pronounced "mock" rhymes with bach.

@PatchBits

4 ай бұрын

It's the British pronunciation

I’m confused are you a furry