This is my attempt to build the safest yet LIGHTEST roll cage for my Smart-Hayabusa Video Tube bender: • Building for free, the...
Жүктеу.....
Пікірлер: 94
@nikhill6917 Жыл бұрын
Viny I have no idea why you only have 40k subs. Your technical knowledge is enlightening. Your sense of humour keeps me laughing throughout your videos. I hope the channel continues to gather momentum and patronage. I greatly appreciate your efforts as I’m sure others do. Thank you from New Zealand.
@VinyB57
Жыл бұрын
Nic, thank you very much for your comment! Glad you enjoyed my content and my humour! I'll keep making good content and the channel will grow! It's just taking a bit of time I guess! 🤷♂️
@gafrers Жыл бұрын
Quality and Humor as Always 👍👏
@VinyB57
Жыл бұрын
Thanks again!
@DeadRedRider Жыл бұрын
Nice work there Charlie Dee! Suggestion: Paint the A-Pillar cage tubes flat black. At least the sides facing the cabin. That way they don't catch your eye when on track.
@VinyB57
Жыл бұрын
Good call, I'll keep it in mind when I'll do the windshield! 👌
@NewZeroland Жыл бұрын
Man your engineering and editing is so inspiring. I love this project!!
@VinyB57
Жыл бұрын
I appreciate that! 🤙
@colinsmith7385 Жыл бұрын
Thanks Viny, hugely entertaining as always!
@VinyB57
Жыл бұрын
Glad you enjoyed it
@robertjohnson47849 ай бұрын
Hey, brother enjoyed the video a little tech tip Get all your landing points of your cage marked on the floor drill holes through the floor drop the cage down. Weld top of cage up, lift the cage back up. Then put plates over your landing points hole and weld your cage to the plates or rocker boxes.
@VinyB57
9 ай бұрын
Will try it on the next cage! (not sure I'm gonna build another one to be frank...😅)
@robertjohnson4784
9 ай бұрын
@@VinyB57 Thank you for the reply, Vinnie. You truly are a very talented man. All your machining skills are awesome You've done way more than others would do love that you build stuff from scratch. Best of luck on all your projects.
@VinyB57
9 ай бұрын
@@robertjohnson4784 Thanks Bob!
@earlgreystoke3324 Жыл бұрын
Excellent video! Your enthusiasm & humor are inspiring.
@VinyB57
Жыл бұрын
Thanks Earl! 👍
@kevindavidson6715 Жыл бұрын
Very impressive job on the rear section of the roll cage ! Love the removable section 👍
@VinyB57
Жыл бұрын
Hey thanks Kevin! It's gonna be super useful!
@chrstphrr Жыл бұрын
Slick trick with the machining work on the back cross tubes!
@Dean2die4 Жыл бұрын
Loving the episode👍 thanx!!
@VinyB57
Жыл бұрын
Thanks man! 👍
@MyZxcvb12 Жыл бұрын
Thanks for sharing your projects with us I absolutely love it brilliant.
@VinyB57
Жыл бұрын
Hey, it s my plaisure, glad you liked it!
@BDFGarage Жыл бұрын
Great work, good to see more videos coming from you; love the channel!
@VinyB57
Жыл бұрын
Thanks Adam! It's building season, so I've got more vids coming!
@thehomesteadthread Жыл бұрын
HAHAHAHAH "*but definitely not Erik". That poor guy has no idea of the joy he brought me...
@wheellife Жыл бұрын
great vid sir!! the doodle on paper was a nice touch... lol
@VinyB57
Жыл бұрын
😅🙈
@sinisterhipp0 Жыл бұрын
Hey, just jumped here to comment. I’ve just started at the beginning of your Smart Hayabusa and DIY Workshop machines. I’m liking what your making and I like the information your providing.
@VinyB57
Жыл бұрын
Glad you enjoy my content! 🤙
@hollandduck79 Жыл бұрын
Hello from the Netherlands . thanks for the video Viny . Sincerely, Hollandduck
@VinyB57
Жыл бұрын
Hello there! Thanks for the comment! 👌
@hollandduck79
Жыл бұрын
@@VinyB57 you're welcome
@thomasbonde2118 Жыл бұрын
great laughs as alway. Great stuff, thanks Margrethe C
@VinyB57
Жыл бұрын
🤣 you're welcome! 😉
@loveleyday Жыл бұрын
SUBBED!! Best channel EVER. Loving your videos, they must take up so much time to put together, so it's much appreciated!!!
@VinyB57
Жыл бұрын
Hey thanks Nic! Yes it s about 25 to 35 hr of editing per video...plus the time for the build itself 😅 Glad you joined the group! 😬
@alexisramirez65875 ай бұрын
Hi! Would you consider making another cage? I also have a smart and am looking to get a roll cage made..
@VinyB57
5 ай бұрын
Not really...I'm far from a pro-cage-builder...
@vincelamarche9686 Жыл бұрын
With more weight and the stickier tires you will soon be changing the output shaft in the transmission. I have been around a lot of Hayabusa motorcycles My personal bike had over 200,000 miles (not KM) hen I sold it. I broke mine when the bike had about 40,000 miles. it as the first time I put a drag radial on it for a weekend at the track On the second launch it snapped and broke the case and waterpump when it happened. Another weak spot is the sprocket cover. with stock clutch springs they do ok but if you upgrade the springs hen you pull in the clutch it will break the cover. Billet covers are not too expensive and they do have little supports that are cheap too and work well. If you have any questions just let me know!
@MJPilote Жыл бұрын
Very very smart move!
@VinyB57
Жыл бұрын
indeed! 👍
@anateresahernandez4460 Жыл бұрын
Que fino se ve todo el trabajo
@matthewjackson9765 Жыл бұрын
DOM tube bending mistakes are painful to watch! Love you tube connection for the removable section! How long to make a 90deg bend with your bender?
@VinyB57
Жыл бұрын
Hey thanks Matthew, about 5 min or so for a 90 bend, I have to use 2 full strokes of the bottle jack, and that thing is not that fast!
@306GokartsCustomBuilds Жыл бұрын
Great all around skills..fabrication to the amount of video editing is on point and entertaining 👌
@VinyB57
Жыл бұрын
Hey thank you 👍
@patriceroux9743 Жыл бұрын
Toujours aussi divertissant. Lâche pas my friend !
@VinyB57
Жыл бұрын
Hey merci mon Pat! 🤟
@mahdialsenussi3066 Жыл бұрын
Nice one 👍
@htownblue11 Жыл бұрын
Wow that removable portion was engineered and made masterfully. Viny your humor coupled with your skills never fails to impress and entertain. Congrats on breaking 40K subs man!
@VinyB57
Жыл бұрын
Hey big thanks TJ! 👌
@DetroitMicroSound Жыл бұрын
Nice work!
@VinyB57
Жыл бұрын
Thanks pal!
@DetroitMicroSound
Жыл бұрын
@@VinyB57 Yea man! Love it! Which busa engine is it again? have ya considered extra-widebody, and wider reach suspension? Would corner like a beast! Oh wait, we don't need you going unconscious. 🤣
@KnownSender1 Жыл бұрын
Great video man car is looking good
@VinyB57
Жыл бұрын
Hey thanks Ryan..it's finally strting to look like a proper race car.... And thanks for followeing for so long buddy! 🤙
@artyomyaartyom5681 Жыл бұрын
Hi, a native capsule bent during the race? I use 450 in offroad so hard, without distortions even with 3 people
@VinyB57
Жыл бұрын
No it s just in case of a crash a 250km/h...which Im not even capable of reaching...yet 😉
@artyomyaartyom5681
Жыл бұрын
@@VinyB57 it is so quickly, save you!) guys in Russia rode a homemade buggy in case of an accident, the seat belts could not stand the coup, thank God the guy is alive and well. we have a Volga car, here it is intact during an accident, and all people inside is damaged((
@L4WNY.. Жыл бұрын
Smartuki the company are round the corner from where I live! I was in talks with the boss about doing the Gumball 3000 rally in one a few years ago! 😝🙌
@VinyB57
Жыл бұрын
That's cool!
@jlrbernard Жыл бұрын
bonjour cousin Canadien . Pour un premier arceau il est formidablement bien réalisé , c'est avec ses erreurs qu'on apprend le mieux , bon les erreurs en 25CD4S c'est pas donné . j'avais réalisé le mien en faisant d'abord un gabarit avec des tasseaux en bois car comme tu le montres il faudrait avoir au mois 5 mains pour mesurer . En regardant la vidéo , je me suis dit M.... il soude les supports comment il va souder au dessus mais avec des contorsions du bonhomme et de l'arceau tu y es arrivé . bravo aussi pour ton idée de raccords rapides que dis je , hyper-rapides d'arceau . J'espère que tu n'as pas déposé de brevet , je vais copier ça intégralement .Bref je suis comme tout le monde surpris et indigné que tu ne fasses pas plus de vue , quand on voit les co......ies qui trainent sur d'autre vidéos .Signé un maudit français : Jacques
@hothotllywood4192 Жыл бұрын
Si tu crois qu'on a pas vu [tout de suite] le petit dessins en haut à gauche😆 Je connaissais pas l'astuce pour le pare brise collé. Merci !
@VinyB57
Жыл бұрын
Ben non...y a rien a voir 🙈
@therealRaccondog Жыл бұрын
Yeah! new video! It is nice
@VinyB57
Жыл бұрын
Hope you enjoyed it!
@manulemelin6904 Жыл бұрын
Nice! genia les tubes amovibles. C'est quoi le poids total actuel?
@VinyB57
Жыл бұрын
pret de 1600lbs. J ai pas mal de chose a enlevé/changé et apres je vais le repeser
@manulemelin6904
Жыл бұрын
@@VinyB57 J'ai un gsxr1100 qui dord dans le cabanon... tu me donne envie d'acheter un mg midget o un spitfire pour le mettre dedans.. :D
@VinyB57
Жыл бұрын
@@manulemelin6904 Let s go! 🤟
@massimilianoturini5217 Жыл бұрын
Un genio !
@VinyB57
Жыл бұрын
Gracias!🤙
@tonyestvik7969 Жыл бұрын
Grats to 40000 subscribers! You are nuts....! 😉 Looking realy good, starting to be a safe- er car... Did your wife get it back? You are a very coulifided engenier, could you teach out for a didiot like me how to use cad.... I have tryid soo many times to learn, but everything gets so complicade at once! Very good job, cant you take the famaly and move to Sweden, become our neihgbors....? Sorry about my spelling!
@VinyB57
Жыл бұрын
It's all good Tony! And no, the wife didn't get it back! 😉 To learn CAD it's just to practice and watch a bunch of KZread vids!
@maxpat82 Жыл бұрын
Super encore une fois.. Content de voir que tu as trouvé ton bonheur chez Stadium! Hâte de voire la suite!
@VinyB57
Жыл бұрын
Salut Max, c'est bien toi qui m'avait écrit au sujet de Stadium?
@maxpat82
Жыл бұрын
@@VinyB57 oui Mr.
@MaLiXs88 Жыл бұрын
Sans les portes on dirait un kart sur les stéroides! il c'st fait plusieurs smart avec des moteur de moto mais la tienne sort clairement du lot ! un projet sans précédent a mon avis!
@VinyB57
Жыл бұрын
Hey merci Jay! et en plus, j ai une tonne d idees et d upgrades qui s en viennent!
@MaLiXs88
Жыл бұрын
@@VinyB57 malade !
@AlanDavid1955 Жыл бұрын
Great Job Viny , I got the engine running !!! I'll send you some pictures soon and let you know what I found ! Thanks for the video Alan
@VinyB57
Жыл бұрын
Ah great news Alan! Yes let me know what happened and if you have a short clip of the thing running you can send me, I could put it at the end of one of my vid!
@leerobertlascano7917 Жыл бұрын
Ill definitely be waiting for a big big wangg
@VinyB57
Жыл бұрын
Oh and a big big wangg there will be!!!
@rockstarfan886 Жыл бұрын
Measure twice bend once
@VinyB57
Жыл бұрын
100% 👍
@DanCycles Жыл бұрын
I wanted a Hayabusa powered smart two so bad… but I don’t have the skills for it… I don’t know welding, and welders charge $150 per hour around my area
@VinyB57
Жыл бұрын
Yeah...it's expensive or a lot of time, but welding is fairly easy to learn you know! Especially with all the youtube tutorials!
@adamdozier57574 ай бұрын
You a fart-smeller (Just a joke) when it comes to building stuff. I'm a new subscriber. Can't wait to see the other videos. Good luck on the next one. Keep it going.
@Venum360 Жыл бұрын
3:10 WHO ARE YOU????
@VinyB57
Жыл бұрын
I don't know anymore! 😲
@adman6380 Жыл бұрын
Has your wife been adding her “sketches” to your notes again?
Пікірлер: 94
Viny I have no idea why you only have 40k subs. Your technical knowledge is enlightening. Your sense of humour keeps me laughing throughout your videos. I hope the channel continues to gather momentum and patronage. I greatly appreciate your efforts as I’m sure others do. Thank you from New Zealand.
@VinyB57
Жыл бұрын
Nic, thank you very much for your comment! Glad you enjoyed my content and my humour! I'll keep making good content and the channel will grow! It's just taking a bit of time I guess! 🤷♂️
Quality and Humor as Always 👍👏
@VinyB57
Жыл бұрын
Thanks again!
Nice work there Charlie Dee! Suggestion: Paint the A-Pillar cage tubes flat black. At least the sides facing the cabin. That way they don't catch your eye when on track.
@VinyB57
Жыл бұрын
Good call, I'll keep it in mind when I'll do the windshield! 👌
Man your engineering and editing is so inspiring. I love this project!!
@VinyB57
Жыл бұрын
I appreciate that! 🤙
Thanks Viny, hugely entertaining as always!
@VinyB57
Жыл бұрын
Glad you enjoyed it
Hey, brother enjoyed the video a little tech tip Get all your landing points of your cage marked on the floor drill holes through the floor drop the cage down. Weld top of cage up, lift the cage back up. Then put plates over your landing points hole and weld your cage to the plates or rocker boxes.
@VinyB57
9 ай бұрын
Will try it on the next cage! (not sure I'm gonna build another one to be frank...😅)
@robertjohnson4784
9 ай бұрын
@@VinyB57 Thank you for the reply, Vinnie. You truly are a very talented man. All your machining skills are awesome You've done way more than others would do love that you build stuff from scratch. Best of luck on all your projects.
@VinyB57
9 ай бұрын
@@robertjohnson4784 Thanks Bob!
Excellent video! Your enthusiasm & humor are inspiring.
@VinyB57
Жыл бұрын
Thanks Earl! 👍
Very impressive job on the rear section of the roll cage ! Love the removable section 👍
@VinyB57
Жыл бұрын
Hey thanks Kevin! It's gonna be super useful!
Slick trick with the machining work on the back cross tubes!
Loving the episode👍 thanx!!
@VinyB57
Жыл бұрын
Thanks man! 👍
Thanks for sharing your projects with us I absolutely love it brilliant.
@VinyB57
Жыл бұрын
Hey, it s my plaisure, glad you liked it!
Great work, good to see more videos coming from you; love the channel!
@VinyB57
Жыл бұрын
Thanks Adam! It's building season, so I've got more vids coming!
HAHAHAHAH "*but definitely not Erik". That poor guy has no idea of the joy he brought me...
great vid sir!! the doodle on paper was a nice touch... lol
@VinyB57
Жыл бұрын
😅🙈
Hey, just jumped here to comment. I’ve just started at the beginning of your Smart Hayabusa and DIY Workshop machines. I’m liking what your making and I like the information your providing.
@VinyB57
Жыл бұрын
Glad you enjoy my content! 🤙
Hello from the Netherlands . thanks for the video Viny . Sincerely, Hollandduck
@VinyB57
Жыл бұрын
Hello there! Thanks for the comment! 👌
@hollandduck79
Жыл бұрын
@@VinyB57 you're welcome
great laughs as alway. Great stuff, thanks Margrethe C
@VinyB57
Жыл бұрын
🤣 you're welcome! 😉
SUBBED!! Best channel EVER. Loving your videos, they must take up so much time to put together, so it's much appreciated!!!
@VinyB57
Жыл бұрын
Hey thanks Nic! Yes it s about 25 to 35 hr of editing per video...plus the time for the build itself 😅 Glad you joined the group! 😬
Hi! Would you consider making another cage? I also have a smart and am looking to get a roll cage made..
@VinyB57
5 ай бұрын
Not really...I'm far from a pro-cage-builder...
With more weight and the stickier tires you will soon be changing the output shaft in the transmission. I have been around a lot of Hayabusa motorcycles My personal bike had over 200,000 miles (not KM) hen I sold it. I broke mine when the bike had about 40,000 miles. it as the first time I put a drag radial on it for a weekend at the track On the second launch it snapped and broke the case and waterpump when it happened. Another weak spot is the sprocket cover. with stock clutch springs they do ok but if you upgrade the springs hen you pull in the clutch it will break the cover. Billet covers are not too expensive and they do have little supports that are cheap too and work well. If you have any questions just let me know!
Very very smart move!
@VinyB57
Жыл бұрын
indeed! 👍
Que fino se ve todo el trabajo
DOM tube bending mistakes are painful to watch! Love you tube connection for the removable section! How long to make a 90deg bend with your bender?
@VinyB57
Жыл бұрын
Hey thanks Matthew, about 5 min or so for a 90 bend, I have to use 2 full strokes of the bottle jack, and that thing is not that fast!
Great all around skills..fabrication to the amount of video editing is on point and entertaining 👌
@VinyB57
Жыл бұрын
Hey thank you 👍
Toujours aussi divertissant. Lâche pas my friend !
@VinyB57
Жыл бұрын
Hey merci mon Pat! 🤟
Nice one 👍
Wow that removable portion was engineered and made masterfully. Viny your humor coupled with your skills never fails to impress and entertain. Congrats on breaking 40K subs man!
@VinyB57
Жыл бұрын
Hey big thanks TJ! 👌
Nice work!
@VinyB57
Жыл бұрын
Thanks pal!
@DetroitMicroSound
Жыл бұрын
@@VinyB57 Yea man! Love it! Which busa engine is it again? have ya considered extra-widebody, and wider reach suspension? Would corner like a beast! Oh wait, we don't need you going unconscious. 🤣
Great video man car is looking good
@VinyB57
Жыл бұрын
Hey thanks Ryan..it's finally strting to look like a proper race car.... And thanks for followeing for so long buddy! 🤙
Hi, a native capsule bent during the race? I use 450 in offroad so hard, without distortions even with 3 people
@VinyB57
Жыл бұрын
No it s just in case of a crash a 250km/h...which Im not even capable of reaching...yet 😉
@artyomyaartyom5681
Жыл бұрын
@@VinyB57 it is so quickly, save you!) guys in Russia rode a homemade buggy in case of an accident, the seat belts could not stand the coup, thank God the guy is alive and well. we have a Volga car, here it is intact during an accident, and all people inside is damaged((
Smartuki the company are round the corner from where I live! I was in talks with the boss about doing the Gumball 3000 rally in one a few years ago! 😝🙌
@VinyB57
Жыл бұрын
That's cool!
bonjour cousin Canadien . Pour un premier arceau il est formidablement bien réalisé , c'est avec ses erreurs qu'on apprend le mieux , bon les erreurs en 25CD4S c'est pas donné . j'avais réalisé le mien en faisant d'abord un gabarit avec des tasseaux en bois car comme tu le montres il faudrait avoir au mois 5 mains pour mesurer . En regardant la vidéo , je me suis dit M.... il soude les supports comment il va souder au dessus mais avec des contorsions du bonhomme et de l'arceau tu y es arrivé . bravo aussi pour ton idée de raccords rapides que dis je , hyper-rapides d'arceau . J'espère que tu n'as pas déposé de brevet , je vais copier ça intégralement .Bref je suis comme tout le monde surpris et indigné que tu ne fasses pas plus de vue , quand on voit les co......ies qui trainent sur d'autre vidéos .Signé un maudit français : Jacques
Si tu crois qu'on a pas vu [tout de suite] le petit dessins en haut à gauche😆 Je connaissais pas l'astuce pour le pare brise collé. Merci !
@VinyB57
Жыл бұрын
Ben non...y a rien a voir 🙈
Yeah! new video! It is nice
@VinyB57
Жыл бұрын
Hope you enjoyed it!
Nice! genia les tubes amovibles. C'est quoi le poids total actuel?
@VinyB57
Жыл бұрын
pret de 1600lbs. J ai pas mal de chose a enlevé/changé et apres je vais le repeser
@manulemelin6904
Жыл бұрын
@@VinyB57 J'ai un gsxr1100 qui dord dans le cabanon... tu me donne envie d'acheter un mg midget o un spitfire pour le mettre dedans.. :D
@VinyB57
Жыл бұрын
@@manulemelin6904 Let s go! 🤟
Un genio !
@VinyB57
Жыл бұрын
Gracias!🤙
Grats to 40000 subscribers! You are nuts....! 😉 Looking realy good, starting to be a safe- er car... Did your wife get it back? You are a very coulifided engenier, could you teach out for a didiot like me how to use cad.... I have tryid soo many times to learn, but everything gets so complicade at once! Very good job, cant you take the famaly and move to Sweden, become our neihgbors....? Sorry about my spelling!
@VinyB57
Жыл бұрын
It's all good Tony! And no, the wife didn't get it back! 😉 To learn CAD it's just to practice and watch a bunch of KZread vids!
Super encore une fois.. Content de voir que tu as trouvé ton bonheur chez Stadium! Hâte de voire la suite!
@VinyB57
Жыл бұрын
Salut Max, c'est bien toi qui m'avait écrit au sujet de Stadium?
@maxpat82
Жыл бұрын
@@VinyB57 oui Mr.
Sans les portes on dirait un kart sur les stéroides! il c'st fait plusieurs smart avec des moteur de moto mais la tienne sort clairement du lot ! un projet sans précédent a mon avis!
@VinyB57
Жыл бұрын
Hey merci Jay! et en plus, j ai une tonne d idees et d upgrades qui s en viennent!
@MaLiXs88
Жыл бұрын
@@VinyB57 malade !
Great Job Viny , I got the engine running !!! I'll send you some pictures soon and let you know what I found ! Thanks for the video Alan
@VinyB57
Жыл бұрын
Ah great news Alan! Yes let me know what happened and if you have a short clip of the thing running you can send me, I could put it at the end of one of my vid!
Ill definitely be waiting for a big big wangg
@VinyB57
Жыл бұрын
Oh and a big big wangg there will be!!!
Measure twice bend once
@VinyB57
Жыл бұрын
100% 👍
I wanted a Hayabusa powered smart two so bad… but I don’t have the skills for it… I don’t know welding, and welders charge $150 per hour around my area
@VinyB57
Жыл бұрын
Yeah...it's expensive or a lot of time, but welding is fairly easy to learn you know! Especially with all the youtube tutorials!
You a fart-smeller (Just a joke) when it comes to building stuff. I'm a new subscriber. Can't wait to see the other videos. Good luck on the next one. Keep it going.
3:10 WHO ARE YOU????
@VinyB57
Жыл бұрын
I don't know anymore! 😲
Has your wife been adding her “sketches” to your notes again?
@VinyB57
Жыл бұрын
The d!ck fairy striked again! 😮