I finished the DeLorean! Check this out! kzread.info/dash/bejne/dqd12ritaZfZkps.html

Nobod ever comments on Max's editing, but if it wasn't for the unique way Max edita, this channel would not be what it is. He literally makes this channel have the unique feel that it does with Alex's speech always being tight and no pauses, plus the way Alex delivers a quip or missive and then a rapid cut away. Thats the style max delivers.

@jspaulding4106

9 ай бұрын

People do. It is appreciated! He is great (if not amazing). He keeps growing creatively.

@SuzukiKid400

9 ай бұрын

I’m pretty sure Alex does most of the editing!

@jspaulding4106

9 ай бұрын

@@SuzukiKid400 Alex will literally say "save that for the bloopers, Max" in the videos.

Alex, yet again brother, you just make the cleanest, most squared away content on the tubes. All of your stuff looks like it was done by a huge production company yet has the honesty and feel of a single, passionate, guy, sharing his love of cars with his buddies. I feel like I have known you for years as I’ve been watching your work almost as long as you’ve been producing it. This was a great learning experience. I’ve never seen this entire process start to finish. Thanks again for sharing your passion with us. See you next week.

@richsmith9063

9 ай бұрын

Don't forget about Max, Alex's long-time collaborator & friend....who does filming & ALL of the editing....

@PeterHinkle

9 ай бұрын

@@richsmith9063 oh no. I would never exclude Max. I was simply referring to the fact that Alex maintains complete control of his content and makes the decisions about how it’s presented.

donations are deductible... for the donors... Less than 40 percent of the donations go to research. The top executives of the foundation make hundreds of thousands in income and since it's inception we are not as close to a cure as we were before. We have funded the machine that is big pharma and we are no closer to a cure. This is a grift. Donate to people not organizations. You'll get more from giving to ppl suffering than giving to an org that gives tax breaks.

@billsmith5593

9 ай бұрын

The Jimmy V Foundation does direct investment in Cancer research. 95% to cancer research

I worked at a place that used dry ice cleaners. We would always degrease first and pressure wash. It would nearly eliminate splatter onto already cleaned areas. We also degreased and rinsed afterwards. We would go through 6-10 totes of dry ice per week with 3 blasters.

@jwalster9412

9 ай бұрын

That doesn't sound like a lot.

@rydplrs71

9 ай бұрын

@@jwalster9412 he just spent 2 days using one tote with one blaster. We didn’t use co2 on everything, but did use each blaster a few hours a day. It was enough for a profitable operation. They were in different locations so it was smarter to have 3 then it was to move the blasters or the stuff we were cleaning.

@williambell7763

9 ай бұрын

​@@rydplrs71why dry ice over just a pressure washer? Looks like it did a similar job

@SiXSpeedSolo

9 ай бұрын

@@williambell7763the ice is penetrating from the top in. Removing any lighter things with a degreaser and pressure washer speeds up the ice blasting process. The pressure washer and degreaser didn’t come close to what the dry ice machine did lol

I was lucky enough to visit LSC with Mike from DeLorean Midwest and I was AMAZED with how good the car looked after Ice Blasting. The interior, body, and underside of this DeLorean probably look better than it did new. It’s an amazing restoration. Great job Alex

@JRs-Garage

9 ай бұрын

Great to get a first hand account, was Alex as funny as he is on videos in person 👍🏻😂 He’s a great KZreadr ! I always enjoy his videos

@rdm20fan

9 ай бұрын

Exactly what you would expect.

There’s no question, when this build is done, you will have the most incredible Delorean EVER!

@clasicradiolover

9 ай бұрын

Probably better than new

Literally laughed out loud when I saw the wig. All in on the DeLorean .

@LegitStreetCars

9 ай бұрын

Thanks brother!

@madmax82988

9 ай бұрын

Literally?!

@zollotech

9 ай бұрын

@@madmax82988yep

@owui7323

9 ай бұрын

what ios version is the delorean running on

@boboso7238

9 ай бұрын

@@owui7323 It was called Logo, found on the Commodore 64 at the time.

Boogered up spots or not, the decision to go the dry ice route was definitely money well spent! She cleaned up really nice under there and, although you found a little rust (that's evidently repairable), that's a super nice undercarriage for a 40 year old car! I also wanted to thank you Alex & Max for the merch that was sent to me! I'm so grateful and I do appreciate it from the bottom of my heart! Until next week.... MLAR (much love and respect) 💙🙏🏼

I'd suggest reading up on The Komen foundation. Less than 20% of the money goes to anything cancer related. There are far better charities that actually help people.

@inMotionOutdoors

9 ай бұрын

Yep, they are a bunch of scamming liars

@graybeardgolf

9 ай бұрын

Agreed

@Insertquartertocontinue

9 ай бұрын

Most charities are like this.

@majornerd

9 ай бұрын

Not just that, they have aggressively gone after other charities that use a “pink” anywhere close to theirs for breast cancer. The Komen foundation is a cancer.

@kd8opi

9 ай бұрын

Easy. He’s trying to do something good.

Well, whatever mistakes you make, you can always go back in time to correct them. Just make sure you have access to 1.21 gigawatts 😂

@TrojanLube69

9 ай бұрын

clever

Love the DeLorean series! Awesome to see you go all out in this dream restoration.

@vaibhavdlv

9 ай бұрын

Really appreciate the amount of efforts Alex is putting in these videos and the series is coming around quite well. With it's stainless steel + fiber body so many different things to see here.

Disassembly…so satisfying! Remembering where it all goes back is my challenge!! I love watching you do it all!!

I can't believe you are taking the DeLorean to this level before Halloween. You are a determined man.

@willemp6432

9 ай бұрын

He is really the hardest working car guy on UTube. Like all of us just a week of working. Respect.

Alex, I'm so impressed with your temperament, attitude and patience. If I were doing one tenth of this work I'd be cussing and throwing tantrums in private 😂.

@SilvaDreams

9 ай бұрын

When working on these older cars you either have to have patience or they quickly teach you to have some.

Awesome content as always.Thanks for sharing and taking us along

Alex, I SOOO appreciate your attention to detail and the lengths that you go to, especially in this restoration. Your humor and comments during the work add a "next door neighbor and buddy" quality to the videos. I always watch to the end for the outtakes. Lol! 😂 Well done! Very well done! As Always, May God Bless you and yours!

I wish there were 3 of you so you could pump out Delorean content faster 😂 absolutely loving this series can’t wait to see it all finished!

I watch this channel all the time and because of you ive done the same thing to my car, i just got done replacing the suspension with coil overs, rack, control arm, tie rod ends, ball joints, wheel bearing, ect ect just because i like the car i have. To see how much harder/similar it is to this (its a 20 year difference to my 99 es300) makes me very happy that my undertaking got done and i have a basically new car that i built MYSELF instead of buying. Even if its not some high HP thing i dont got that money

@ludvigtande1236

9 ай бұрын

Love the 99 es 300❤

Thank you for having us Alex! It was a * blast * 😂 Dry Ice Blasting is incredibly satisfying to do and watch. One correction I did want to make, the machine ( Karcher IB 7/40 is $24,499 ) not 40k. The air compressor we used is around that price point. Not cheap but a little bit more affordable lol

Doc traveled back to the future to do the intro of Alex' video! Awesome!

Awesome transformation alex i think the frame will not be an issue and get fixed excited for the next video and seeing the suspension and engine finished up

Alex the dry ice is the ticket! An amazing transformation on the frame & underside of the DeLorean! Once you get the frame fixed, the new suspension & brake upgrades this DeLorean will be amazing! About as close to going back in time as you will be able to do! In order to get to Back to the Future speeds consider an LS swap on the DeLorean after you have done all the stock content you can! That would give you a whole new round of amazing content for those of us who would like to see you take it to a higher level!

Such interesting content and excellent production quality. I'm always bummed when the end of a video is coming and chomping at the bit with anticipation for the next video. Thanks so much for doing what you do.

I have done a lot of regular sand blasting, and a little media blasting, but this is the first time I have seen dry ice blasting in action. It looks like it was money well spent because it showed you some problem areas that you can fix before they become a major issue.

Dry Ice Blasting, GREAT SCOTT! 🤯 Also, I was really surprised these guys showed up with a Kärcher, a brand that is very common here in central EU :D.

Even though you're replacing the suspension parts, if you were to clean them to perfection, laser cleaning cleans even better than dry ice. It's perfect for things like those control arms. It removes rust perfectly as well.

I'll admit, I have been busy and not able to watch. Very, VERY satisfying to watch. Just watch it all go away... Very, Very satisfying. Reminds me, I will be doing my own break job this weekend on my car, all 4.... might as well. And I wish we could kill breast cancer forever. No woman should go through that.

for stuck tie rods, instead of whacking the bolt with a nut on it, hit the side of the knuckle where it threads through and it will pop right out.

@AYoutubrrr

9 ай бұрын

right after making the comment i see you do the same thing i meant after you cut the castle nuts off. lol good job man

@FastSS02

9 ай бұрын

I was cringing at this myself! If you intend to reuse the ball joint NEVER smack it with a hammer. Hit the spindle or use the ball joint tool like he used on the spindle to pop it loose if a hammer doesn't do the trick. You can also use the tension of the suspension spring if you put the nut on the spindle and put a jack under the control arm and whack the spindle to pop it loose. This trick works great on G body and S-truck suspensions.

Special thanks to Jason and crew. Those guys rock. Alex the car looks awesome. See you on Halloween.

i appreciate your content , no extra hype just good content.

I love the outtakes at the end. It shows just how much effort and dedication you put in to these videos. Great job Alex.

Wow, what a progress! I’m very curious to see them restore the frame also ! Great job done Alex! 👍😀

The car itself is absolutly disaster engineered ,but its still a legend

Look forward to Saturday mornings just for these videos.

Wow nice work, it’s looking amazing! Can’t wait to see what you accomplish in the next video but you’re doing a phenomenal job!

I'm currently sweeping a road here in Dublin, Ireland. Because that's how exciting my life is. Anyway, on a coffee break and hoped there would be a cool video to watch.. and here I am! Nice one!

Wow so impressed of the difference the dry ice did looks so good! You’ll get it done Alex!

Loving the vids keep them coming !

@17:11 "That could fester hatred and anger" See "Hoovie" and "Buried vehicles in my yard".

I appreciate you looking into a local Dry Ice Blaster Supplier to use on your beloved DeLorean. .I don’t know if you did contact Rebuild Rescue to speak to Jason to learn more about Dry Ice Blasting. When I suggested it to you, I was convinced that the results would take your Car back in time! Your results are extraordinary.

Lol , G'luck putting all those washers back on.. I think had DeLorean just used correct length bolts they'd probably be in business still.

Alex, never hit the stud on tie rods or ball joints for removal. Hit the KNUCKLE on the SIDE of the stud and it will shock it loose! First thought is to hit it the direction you want it to go but horizontal impact is what loosens the tapered studs!

@MM_in_Havasu

9 ай бұрын

That's correct, the knuckle will deform enough by hitting it to release the taper shaft easily(for the most part).

@slasher9883

9 ай бұрын

Yes this one of the first things you learn as an apprentice mechanic, never hit the stud of the ball joint (especially if you plan on reusing it) as it will wreck the stud. The double hammer on the knuckle technique almost always works and doesn't damage the stud.

Enjoying this series so much, I've loved DeLoreans since I was little and you restoring this one makes me excited! Plus I had to order your new merch 😂

I appreciate that you keep your shop clean and organized. That saves sooooo much time in the long-run because you know where all your tools are. The restoration of that car is going great! I hope you make your deadline.

I love that you are doing this!!!

This is not magic, this is hard work. Thanks for sharing 👍

Great work! The car is coming along really nice. Thanks for the update, looking forward to the next one.

PLEASE PLEASE PLEASE!!!! don’t take my comment as a criticism. I’ve been watching your KZread channel for quite some time. I own a body shop out here in California. So it very much intrigues me to see what you do. You certainly caught my attention when it comes to this DeLorean. The fact that you are taking everything so very serious and have the upmost. Patience is incredible. I am extremely proud of you and also very proud of your spirit. Unfortunately, I realize there is a lot of haters out there. But I definitely am not one. Keep up the great work and look forward to seeing future videos of your DeLorean project. Your friend in California Ron

@protator

9 ай бұрын

There's nothing to take as criticism, you're just rambling without actually saying anything.

@ronhannink1968

9 ай бұрын

@@protator sorry if I was "rambling". My point was I am impressed with you dedication on this project. I wish I was there to give you a hand. You are working on an American icon. I can't wait to see the final results. Again, I am sorry if I was just "rambling" my friend

Where is PETER????? We miss him. Did he go BACK to the FUTURE?

I liked that you put a license plate between the fiberglass and the flame. I've seen some welding guys use a really neat fabric behind their welding and torching that absorbs 100% of the heat from going through to the other side. I wonder if they make a flexible pad like that so you could save that fiberglass from the heat. I know you didn't hit it with "flame" but you can definitely tell it got quite a bit of "heat" on it.

@ORRadtech

9 ай бұрын

There's a tool called an induction heater that doesn't use flame to heat bolts in sensitive areas. They only run a 2 to 3 hundred dollars which is tremendously less expensive than repairing fire damage. Being in the rust belt I'm surprised he doesn't have one already. Of course he's still using MAP gas instead of a true torch which I find surprising for a former professional mechanic.

@kevinkev1530

9 ай бұрын

👍🏾👍🏾👍🏾

Thank you for the breast cancer awareness. My sister and I watched you together every weekend until she lost her fight with breast cancer on August 25th. Now I keep watching you to keep the tradition.

@LegitStreetCars

9 ай бұрын

I'm so sorry to hear that, Shane. Email me at legitstreetcars@gmail.com I want to send you some merch

@shanerichardson9568

9 ай бұрын

Done!

The dry ice machine is kind of mesmerizing and therapeutic all at the same time. Great video by the way.

Spray your wheel wells and undercoating with amsoil mudslinger it's originally designed for off-roaders so they can clean their undercarriages easily but I found that it works great for the car fender wells and under body of any car and stops mud and stuff from oil sticking to your underside it's almost like putting ceramic coating on the undercoat of your car

@FastSS02

9 ай бұрын

Have you never watched one of his videos before? He uses that stuff all the time under hood and for fender wells. He's also an Amsoil dealer.

@kurtzxcvb3481

9 ай бұрын

@@FastSS02 no just started watching it because it was suggested to me cuz I own DeLoreans

Hi Alex great show again. But what happened to Peter ??? you guys made a great team.

Alex, You're so genuine. Happy this is all working out for ya.

I love this series, and I’ve been a subscriber since you were well under 50k. Watching you grow this thing is amazing. It’s not what you do, but I wonder how you’d resto-mod a camper.

It's an amazing transformation, for the price I guess it better be. I think the biggest concern, even after you remove so many vulnerable things, is if it's doing any damage to gaskets/seals and such.

WOW! The before and after hit the spot to clean and expose the big D hidden underbody secrets! Before watching the video, I was split between the process working out like it should and it being an epic fail if the dry ice (coldness) and pressure could have damaged the fiberglass components. I am glad it worked out but not surprised that it did! Alex you are the man! I think you will make the Halloween deadline and be very proud of the final resto!

Alex you need some Speed wrenches. I didn’t think I needed them and I was just lazy but nooo! They saved me so much time doing break lines and getting my motor out of my Taurus.

Dude, wear a respirator mask when you're dry icing, you're breathing in all the garbage that's flying off the car. And make sure the area is well ventilated. Dry ice is frozen carbon dioxide which turns to gas once shot out of the gun and displaces the oxygen around you

@HGSuper

9 ай бұрын

You might have breathing issues in a sealed room at floor level. Co2 is heavy so opening a door helps clear it.

I’m going to have an aneurysm if I don’t find out what happened to Peter

Hey Alex, I really enjoyed watching all of the nastiness being stripped from the DeLorean. Thanks for setting this up. I'm looking forward to another installment. Cheers!

Brilliant channel always enjoy your videos 👏🏻🇬🇧

Wheres PETER?

💥 wtplay.link/legitstreetcars - Download War Thunder for FREE and get your bonus!

@TaldrenDR

9 ай бұрын

Not swapping that engine is an ongoing insult to DeLorean. He never wanted that engine, but was forced into it due to collusion from the big 3 to screw him over. Put a powerplant in that thing that DeLorean himself would have been proud of.

@bioniccommando4178

9 ай бұрын

I wish you would had been around when I was a kid those 90s car rebuild shows were boring I would had learned more watching you then them ! Great jobs as always guy !!!!

@MrNeverseeme

9 ай бұрын

There's a homeless dirty man I see every day on my way to work I wonder if this machine would work to get him cleaned up?

@theyunglos

9 ай бұрын

I suggest making the ice blasting part a short on KZread/tiktok/instagram.. just a suggestion. Get some extra engagements

@RollingRoadEFI

9 ай бұрын

Back to the pile!

This is a great series . I really like how far you go to making them perfect

One of thee most satisfying video I've seen on your channel.😍 That dry ice is so freshes so clean clean! 😅 Great video!

Pick up an LSC Breast Cancer Awareness tee shirt before they sell out! bit.ly/KomenLSCshirts

@markopolo945

9 ай бұрын

Hell yeah I will! Lost my Mom to that😢

@Plarndude

9 ай бұрын

@@markopolo945I’m sorry you lost your mom to breast cancer. I lost my mom too, but the breast cancer didn’t Quite get the chance to kill her. Instead it was the radiation that killed her. Very very painfully.

@tuneskramer69

9 ай бұрын

Really appreciate that your doing this! On your way to become the Mr.Beast of car KZreadrs. You and Tyler with his holiday giveaways!

@beltfandan7209

9 ай бұрын

No one want to drop the bomb on how little money Komen actually donates to research?

You should do LASER etching next time to clean all the metal. Looks so cool, and so does dry ice :)

If anyone can show the world dry ice it is you. Thoroughly enjoyed this video.

And yet again another quilty video love it. And the outtakes are becoming my favourite part 😂

I've watched pretty much all of your projects start to finish but this one is my absolute favourite.

So happy you dry ice cleaned your De Lorian! Looks amazing!!! Now, if you want to go crazy, ceramic coat all the fiberglass and frame and suspension! It will add some protection, but it will be easier to clean again later.

Man, Ive been loving this series. Keep up the fanstizzle work and dont ever change :)

I think I'd be lying if I didn't say this was by far the best DeLorean video you have made is it. I absolutely love that machine in the way he cleans. The thing is freaking awesome! I love your DeLorean by the way!!

What a transformation. You will obviously get a lot of reassurance from this process. Look forward to more videos on the. D-L. Hugh Somerset UK

LOVE spending Saturday mornings with my “car tunes” You answered MANY of my own questions about dry ice blasting. Thanks for ‘splainin’ it to us. Very interesting…!

That was fun Alex. I'm still blowing out black soot from my nose.

@LegitStreetCars

9 ай бұрын

Thanks so much for coming and I'm still picking stuff out of my hair!

That frame epoxy acts as a barrier coat, when you go to repair it with new epoxy paint just be sure you thoroughly coat it all. Any missed areas or pin holes in the epoxy coat can create an area where accelerated corrosion can happen.

😮 wow what a transformation on that frame I didn't even know I could do this with dry ice amazing work you guys did I can't wait to see this car finished, one thing I did knew you was going to do was clean that whole car out even before the dry ice because your a clean freak and I can relate because I'm the same way I just hate to see dirt on my car, great job keep this amazing videos coming your the best and no one does what you do and that's going the whole 9 yards I totally respect that .

Thanks for making this fun and real. Great video and your spirit and humor makes this fun! That wig was hilarious!

Love these vids bro and appreciate how kind hearted you are with donating to charities. Some people will be negative but dont worry about them.

Cool 😎. Awesome job on the semi restoration so far . Definitely a ton of work , but that’s what it takes !

Out of all the car related content I'm watching right now ( which is a lot ) this is by far my favourite. So epically cool 😎

Would have been interesting to see the dry ice on low pressure clean up the engine valley. You do need to treat the alloy tonprevent further deterioration. Plenty of good products from the aerospace industry and then you can do some metal apoxy bonding.

Great energy working on stuff. Can get boring when someone has the wrong attitude working on anything. Keep up the jokes and the bolt turning obsession! Your attention to detail is contagious also!

The 80's-style montage with video-game-font text was hilarious! Nicely done!

Loving this project. It’s like going back to the future

It's great seeing all that grime knocked off with the dry ice. On some of the parts that need rust removal, laser rust removal is really cool, no pun intended or implied 🙂.

Dramatic transform!! Always wanted to see that actually done. Thanks.

Made such an amazing difference. Too expensive for your average family run around, but on a classic car like this DeLorean it is really worth it. Loved the costume. 😀

Another thing sara n tuned found, degreasing and pressure washing first helps a lot. The dry ice machine wont temove grease. Also pre cleaning prevents bits being blown onto cleaned areas

Yes!!! Love my Saturday morning LSC!!!! Holy crap, that dry ice blasting looks amazing!!!

That dry ice blasting is great it's a bit like Shot blasting which I have done but it is not as destructive, I do love the before and after and I am pleased you have now seen just how good it is but the price is not always easy to justify apart from on time machines.

Hello from Bulgaria Alex! I just want to tell you that you are living my dream! I have learned so much of your videos and honestly you are the only one youtuber that I follow. Keep up with the great work you must know that you inspire people all over the world!

You are having way too much fun! Lol.. You're showing the way to make your ride new all over again! Beyond awesome and knowing who can do all these different services is everything. You may need to invest in your own setup.

my favorite series on YT right now!! can’t wait for the next video! also, i wish this was going to be at SEMA, i would’ve loved to see it

GREAT SCOTT!!!!! it's a LSC video on a Saturday night here in Australia!!!!

OMG! I grew up the Chicagoland area (counsole) with an OCD German-American, clean-freak mom and I found this video SO satisfying! Alex, is your mom German by chance? Everytime I watch one of your videos I start talking with that Chicago accent for about a day and a half (da Bears!). For some reason, you seem like family. Keep representing brother!