Whos excited to see this thing with some jets and some fresh carrier bearings? Comment below if you want to see Wes give er the beans 🤙

@michaelhaupers1090

8 ай бұрын

Give her the beans Wes give her the beans

@manaaalsuwaidi3643

8 ай бұрын

Hell yeah man, jetting and slip-on and wider axle is all what it needs (with plastic and some cosmetic works) , it can be a serious sand machine/ drag race machine!! 😈😈

Everyone always claims to have the first, this is definitely NOT the first, not even close

@kmx509

8 ай бұрын

Saw a GSXR swapped 350x a while ago. Was a beast. Wish I would have bought it.

@keithstone4476

8 ай бұрын

@kawimx22 I'd imagine that would be hard to ride, my '85 350x is a wheelie machine haha.

@greenturbo1047

8 ай бұрын

Agreed...buddy had one like 10 + years ago

@tomthomas9910

8 ай бұрын

Yup" RD 400 swaps in the 90"s kaw 500 /750,triples like over 30yrs ago at glamis dunes, dunitics roam I had a maico 250 but you could buy a kit triple tree fork clamps, swing arm & rear axle assembly, making a 2 wheeler a 3 wheeler, & later years to current making 3 wheelers 2 wheelers

@eddiebyrne8984

8 ай бұрын

Definitely need to make the swing arm longer and where it looks like it would tip over easily doing donuts

Dude this thing is going to be so violent when you get the rear settled. Its going to be wild.

I might have an oem + 6 swinger I'll give you . I'll check the shop tomorrow

Yea you guys are gonna take off on the tubes forsure!!!! Saw ur shi on facebook and then found the KZread link. Least to say I was very glad y’all had a channel!!!! This thing is literally stupid fast

Good . That guy really has potential. I've always wanted to build my own bike with a street bike engine. Maybe you just forced me to do it, haha. Is anyone excited to see this 🤙

Not the first 20 years ago I seen a Honda ATC 70 with a 500 triple in it used in ATC pulling

So when I built my little drift trike, I welded some plugs into the triple clamps and had them drilled to 14° effectively adding more castor. It was night and day. The stability I gained was actually suuuper noticeable.

Hell yeah dude just sat down after work and this popped up........check in with ya at the end.

Not the first. About a year ago I saw a GSXR1000 swapped 350x. Not the first but definitely cool.

@jamesellis5549

8 ай бұрын

I bought a Rokon off a guy in 1983 who had built one with a Honda cb550 engine in it,they have been around for years.

Badass dude that thing really has potential. If Wes didn't screw the pooch with the chain it would have been better........kidding. I've always wanted to fab my own dune buggy/go-cart with a street bike engine. You may have just pushed me to do so lol. Keep it up bro can't wait to see the next video on this.

@StupidFastJohn

8 ай бұрын

Ty bro! I cant wait to rejet, fix the carrier and try again 🤙

Man please don't kill yourself on that. I wanna see all the neat shit you're gonna build for years to come. Seriously be careful.

Have a carbed 01 r6 i had it started up from sitting for 3-4 years and it didnt rev out untill its completely warm like if its not around 120+ it wouldnt rev out at all not saying that sensor wire isnt your problem but even after a little ride it would still need warmed up more to rev out the whole way

You made me buy one 😂

Not the first we had a Honda 350x with a kz750 engine she was wicked

Why are y'all running the lower fork backwards

That brake master cylinder is gonna get destroyed when this thing gets ridden hard

400 ex swing arm then you can use the 400 ex brakes and crf 250 front forks would do nicely hit up MRC builds right here on you tube that guy has a ton of knowledge on honda 3 wheeler and 4 heelers

Never call yourself crazy. It’s only for other people to decide. And adding nitrous to that build isn’t an automatic qualifier. That’s not hate, it’s just facts.

@StupidFastJohn

8 ай бұрын

Thats your opinion not a fact lol. Ill never rely on others to decide who and what i am. Im just here to build cool and fast sh** and let others come along for the ride. Thats a fact 🤙

Hear me out. Extended custom swing arm. Wider axel.custom fork clamps to run stiffer crf 450r front forks .

Everyone falling for the bait and thinking you meant that your the first one ever is great! 🎉😂

Sweet 🤘

I got to get me one of these. So nasty I can't wait to see when it's finished with a wider axle and the rear plastics headlight blinkers tail light 🔥

Definitely needa stretch the swing arm about 6-8 inches and widen the axle 3-4 inches on each side so that it doesnt come up and flip over or roll over when u go to turn or do donuts and shit like that. Trust me. Its definitely a death trap without that.

Just sync the carbs I think it will help

Math of the triangle 🔺️ì love this build.

@StupidFastJohn

8 ай бұрын

Lmfao!!!!!!

@goldenwheeledbanshee9160

8 ай бұрын

@@StupidFastJohn ❤️

Since its a 200x frame it should have adjusters right by your foot to adjust the chain one of those could be ofd a little slipping the chain

What's up with the blue cat eye silverado.

Where do you get the tubing for the frame and stuff

@StupidFastJohn

8 ай бұрын

Local welding store carries various sizes of pipe. Also online or tractor supply

Dude your bearings are bad in the rear end. You have one on each side. That is why it rocks back and fourth and it keep throwing the chain because it twist the sprocket.

Your sprocket pitch is different from your atc and street bike. Most streetbikes are 530 I think and atc is 520. Unless you put a different rear sprocket on. .

@StupidFastJohn

8 ай бұрын

I put a different front on in the first build video lol

@rocknraptor3195

8 ай бұрын

520 chain will not even fit over a 530 sprocket. The other way around would have a TON of play! Pretty sure the 600 had 520, some people even use the 525 if replaced.

@rebekahfrench5747

8 ай бұрын

520 and 530 have same pitch just 530 is a wider tooth..

New here like your channel brother

I see a vmaxx idk if that’s gonna fit in a three wheeler lmao

@StupidFastJohn

8 ай бұрын

👀👀 Honest to god originally that was my plan, thats a vmax 4, 4 cylinder 750 2 stroke. I was gunna put it into a 3 wheeler chassis 🤙

@devinholloway530

8 ай бұрын

They sound absolutely insane quad piped but that definitely wouldn’t fit with 4 expansions chambers and a cvt at only 115ish hp stock there’s allot smaller engines that make more power unless you build it I fuckin love snowmobiles

Not the world's first. I have seen a Honda shadow 750. Turned atc at trikefest 2018. Haspn acres. But....😅

I just seen a video of someone who made the exact same thing

I have one in my driveway right now.... 1978 Kawasaki kz650s powder trike

Yeah i just want to rip that one time with some paddle tires on it at glamis.

awsome but you are not the first to build a street bike 3 wheeler i seen a few diff ernt ones

Sounds like 3 cyl on idle

Any one gonna tell him 😂

@StupidFastJohn

8 ай бұрын

Plot twist i already knew

Yeah sorry dude you’re definitely not the first to do shit like this. We were doing it back in the 90s. I had a Goldwing motor on a Honda 350 X ! but your project is looking pretty good. Keep up the great work!👍🏼🫡🤩❤️

Doubt you done it first.. what u think no one in the last 60yrs with a few tools ain't done this.. I've seen bent up reminants in scrap yards and wreckers over the years.. the wheel rolls on..😂😂

The first ? I built my honda 350x with kayana 750cc 5 years ago 😉

Wont last no air filters

I built a GS650 swapped ATC 200 in the 90s. Your way late to the party bubba.

Not the first ik a guy who did it years ago 😂

Hate to tell you but that isn't the 1st one

Finally Second Comment!!!!😂😂😂

@StupidFastJohn

8 ай бұрын

🤣🤙

That exhaust would be great at Wes’s shop so his asshole neighbor could lose his mind

@StupidFastJohn

8 ай бұрын

OMG THATS A GREAT IDEA! 🤣

@Shadowz_660R

8 ай бұрын

😂😂 I agree.

Guy at work. Put. Kawasaki. Tecate3. Frt end. And. Rear axle etc. On a. Suzuki sv650. Month ago. All parts. Bolted rite on ;! So. Not. First !!!

Lmao,..worlds first eh....650csr/tecate mashup in the 90s mate....

Really dude? There were street bike ATC's before you were born.

Sorry. Not the world’s first. It’s been done many times before. You’re a bit late to the party.

Are the front forks backwards or is that just me? Lol

I did that back in 1992 big red with a cb street bike Honda

doo doo machine

defiantly not the first