I Built a MINIATURE Turbofan Engine. Assembly and Start of the Model Kit
Тәжірибелік нұсқаулар және стиль
Today we will assemble with you a miniature turbofan engine kit.
DM119 Turbofan Engine Kits: bit.ly/49LcLXj
Jet Engine: bit.ly/3sNreBy
Stirlingkit Black Friday: bit.ly/40NL8IY
Thank you very much @Stirlingkit for the model kit
Become a channel sponsor and you will get access to exclusive bonuses. More details:
/ @restorationkamasutra
#build #engine #modelkit #stirlingkit
Пікірлер: 219
Its a credit to the companies that put these kits on the market without knowing if they could sell enough to cover manufacturing costs. Good video too.
I want to hear the noise and not music !
@Passions
2 ай бұрын
It sounds like a cheap toy that's why the music plays.
@jodyssey9921
2 ай бұрын
I didn't see any fuel and there are holes in the side, also don't those fans need to be balanced perfectly? Quite a bit of rattling when bolted together, real jet rpms would tear it apart, if I had to guess it only runs by the electric motor.
@Kruzin87
2 ай бұрын
Yea as cool as it is it's not real jet engine that runs off fuel that's why the wires are coming around it to the control module that probably has batteries in it to make it turn faster and what not a real one would have alot more parts that's for sure and be crazy more expensive lol but it's still cool though if it didn't cost so much id def like to build it
@AndreMcHenry
2 ай бұрын
This is a display model, people.... Not a functional jet engine
@jaredcoleman5376
2 ай бұрын
@@Passionswell its a model
Let's face it. For a split second we hoped it would work on kerosene!!! Another great assembly! Good boy!
@MayorMcheese12
2 ай бұрын
Fr i want a functional model! Nothing more satisfying than it actually functioning after you’ve put it together.
@saltuha
Ай бұрын
I hoped for this until the last moment!
This is only meant to be an open engine to show all working parts, when you see all the compressor blades these would all be enclosed since this is where massive pressure is built, then massive air and exhaust pressure is blasted through rear blades which turns front fan, for control of all this you would need much more electronics, and everything would be sealed, but this is so impressive for a see through working turbofan engine
@lalogreiner
Ай бұрын
Exactly, it's about showing the principle!
I’ve just had this delivered. Incredible kit. Can’t wait to build.
Absolutely incredible build, looks amazing
Ahw!!! For a minute there I thought it was going to be a real mini GE turbo fan engine. 😞 😥
That is very very cool. I was a mechanic at United Airlines engines. I moved all over the shop. Tear down and building. All the different engines.
@larz46north18
2 ай бұрын
ya . allison 250c20 hot end inspection Next. 👨🔧
Wow! You couldn’t make it easier. Thanks for sharing 🙏🏻
What beautiful engineering.
I used to work for GE Aviation. Bravo!!!!🎉❤
Gorgeous model. Great to see the fan, compressor, and turbine. What a shame it runs on batteries and not kero! Love the smell of burning kero on the flightline. Bloody expensive but a lot of work in all those parts
@danielsanbsas
2 ай бұрын
¿esto es solo un modelo ? evidentemente funciona a aire pero ¿sirve para un rc ?
@danielsanbsas
2 ай бұрын
y no entendi los dos ultimos barrales que no se lo que controlan
@8kigana
2 ай бұрын
@@danielsanbsas just a stand alone model for display because if you noticed, the plastic parts wouldn't work for kerosene.
Wow. This engine is on another level. Good job
@trevorsmith4881
5 ай бұрын
Also $1000
@masterpooshi6031
2 ай бұрын
Why is it a good job? He didn’t build anything. He just put together the pieces. Someone else built it.
Now we need a suitable jet for that engine🤠
I also built this engine it takes sometime but everything fit direction were excellent the sound is great
Great editing in particular!
FANTASTIQUE j'adore !!!! 👍👍👍👍👍👍
you are genius you could work for many countries who's developing jet engines. you could earns millions brother
Wow ,very awesome !
That is so frinkin cool!
Former Boeing.... I love Turbofan Engines...
What a beautiful video for mechanical enthusiasts! Expensive toy, but I'm thinking of buying it.
Fantastic kit!
I think I'll buy it, I'm starting to like it a lot
AWESOME 🤩 Engineering 👍
The best part was so badly spoilt. To listen to the engine come to life
that's really friggin cool!!!
What??? This cool👏👏👏
Beautiful
NEXT LEVEL
Какая роскошь! 😍🤩🥰
Joli assemblage 🎉
So it’s essentially an electric motor that shows how things spin around.
@Skyprince27
2 ай бұрын
Yes, all that machining & money and it doesn’t even burn anything; what a waste.
@crackerbarrel6965
2 ай бұрын
@@Skyprince27 That’s what I thought when seeing how precisely machined it is, all kinds of hardware to insure it’s held together correctly, then you add amperage with a cool little “throttle” and all it does is hum and spin all those parts around. Oh well, to each his own. I mean, how long at looking at blades spinning around until you’re bored and it ends up in the closet cuz I bet it wasn’t cheap either.
@Skyprince27
2 ай бұрын
@@crackerbarrel6965 Probably if you have $5000 to spend on a birthday present for your 12-year-old son or daughter who want to grow up and build jet engines, it would be just the thing.
@RGF56
2 ай бұрын
@@Skyprince27 Machining for $89 USD ? 3D printing I think 😉
@Skyprince27
2 ай бұрын
@@RGF56 It’s obviously all cast & machined aluminum and must cost about $5k
Wow so cool!!!
WOW! I want!
Wow really well filmed. I did actually think it was going to fire up and actually work though.
C919 wants it's engines back!
Inspiring
Looks cool, the poors are complaining bacause the site doesn't accept EBT.
¡ Outstanding !
Very cool u just need to find a boat engine model kit now👍👍👍
nice warped parts!~
I like this because it isn't bullshit. More of this please.
I can't believe people make these, 3d printing has come so far
WOW!!! 😍😍👍👍👌👌
What's with the rubber gloves??
Without rattling, this could be a very nice desktop fan.
@ernielee6412
2 ай бұрын
Some clear silicone when putting the parts together, would keep the looseness down.
Reverse threaded hardware or flipped footage?
good job
Cool. It's made of Chinesium!
It's a thousand dollars!!!
All that work and no real flames. Could of bought an airfix one. Still it just shows the technology that went into building an engine
That noise🤩 4:00
I reminds me about LEGO and Meccano…! I bet me and my son set a record building the Lego mobile crane. It also comes in multiple bags, I bet a bit more affordable though 😂😂😂
The engine of Tweety's flying birdcage🐥
Nice toy.
I want one of these so badly, but there’s no way I could ever spend 1k on something like this right now.
@jamessmith6162
2 ай бұрын
Absolutely, I was just saying the same thing. But what I find so disheartening, is that they make getting into these hobbies too freaking expensive.
Does it produce any pressure ??
I was hoping that it would actually fire up. Good video though.
Nice work! Ok, it’s cool to see things moving inside but I regret it’s not moving with kerosene!
left-hand thread?
Very cool hobby kit. I wouldnt say it was "BUILT". More like just put together, like a cool lego kit. If it was designed, 3D printed, machined, then, put together, I could CONFIDENTLY say I BUILT IT.
J'en assemble des vrais tous les jours 🥲
Very nice, WAY expensive but nice
Cool :)
The music is to cover the fact that the engine didnt fire. Its being turned by battery power.
Awww. I was hoping it was an actual running engine.
I like your video and wish to assemble like you, but unfortunately it is not available in our country
❤💯🔥🔥
Where do I get one of these?
Where can this kit be purchased??
Build two and make a pod racer
I like it, where can I order one
Where can I get one and how much?
So you put it together.
Where were the combustion chambers? (even if they didn’t really burn fuel)
Iwant it,how it cost's?
Build ❌ Assemble ✅
@hello1414276
2 ай бұрын
Engine Strip and Build, Modules Assemble and Disassemble
Seriously cool, but $1000 for the kit?
Very nice, but obviously not aircraft grade hardware. Beautiful "operating" model.
I wish I could work with that stuff but I ain’t too bright.
Tops
you could make that run for real if you reverse enginer the cutaway plates and make them whole
Mini Pod racers. Holy shit
Ah yes, this is the engine kit that my Facebook feed has ads for selling for $30. They even use this same video. A $1K kit for 30 bucks? What a deal! And totally not a scam...
Where is the best price for this?
Turbine shaft is bent.
هذه المحركات كم سعرها في السوق
Я уж думал он реально на керосине работает...
Who else wanted to hear the engine and NOT the music?
That’s gotta be one expensive model!
how much dos it cost
Двигателя ,аксесуары, наклейки. 😮😮😮😮😮😮😮😮😮😮😮😮😮😮🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉русских не обманули, а об............ 😮😮😮😮😮😮😮😮😮😮😮😮😮
Хорошый макет.
@messixeditz469
5 ай бұрын
How do you pronounce
Boy I was way off on guessing the part. Thought it was a model train set controller. I didn't even know they make stuff like this.
why is the tight going to the left. its suppose to be right to tighten the screws.
Doesn'r say what engine it is. Could be a GE90 or 100, a P|&W JT9D 7R4D, Maybe a CFM6, but it can't be a Roller. Rollers are three spool, this is two. The Trent 900 or 1000 have three spools, the centre one of which rotates counter clockwise to the inner and outer spools. Nice model though, great for instruction.
Well, this model is not real. But for me as a student of the aerospace engines specialty it's important to know all of the engine's structure. Anyway, it's useful video. It just can't work with these lufts on blades.
wow, 1000 USD... a lot.
Я так понимаю начинаем расширяться, скоро будем летать а не ездить, устанавливать так сказать, а вернее бить мировой рекорд