I appreciate the commitment of Andy in showing the dangers that came with early self-moving industrial equipment. Really going the extra mile there.

@ObservingProcrastinator

10 ай бұрын

It was foretold all the way back when he fell into the cherry pond.

@Mark-dc1su

10 ай бұрын

First industrial accident is practically a major milestone.

@liammadden7572

10 ай бұрын

@@Mark-dc1sufirst robo kill

@greengreen110

10 ай бұрын

@@Mark-dc1su up next: worker's rights and safety regulations

@waylontmccann

10 ай бұрын

"Comit to the bit"

For safety reasons I think adding tennis balls to the ends of that metal rod might be an acceptable addition even if it doesn't exactly fit the era you are currently in, but I think your face and eye doctor would really appreciate it.

@emoAnarchist

10 ай бұрын

pool noodles

@thexalon

10 ай бұрын

Even cork, which would be more available, might be a useful move.

@hades392able

10 ай бұрын

he should also be wearing proper ppe, osha will be knocking at his door after seeing this video

@mauritzverster3435

10 ай бұрын

Next invention OSHA😂😂😂

@austinbowles

10 ай бұрын

some leather around would work nicely

Don't forget to seal and use lard as grease. As for your output shaft it needs to be a more solid square or hex wooden shaft

@hermitoldguy6312

10 ай бұрын

That's what I was thinking - and it should go through the water-wheel, too.

@morgan0

10 ай бұрын

yea i was gonna suggest making the shaft a much wider diameter to reduce the torque on it and be better at connecting to other stuff

That wheel must be your best and most precisely made creation yet. Awesome Andy! 🤗

@Cameron-ls3qt

10 ай бұрын

Probably cause he used every modern luxury he could get...

@Slaeowulf

10 ай бұрын

You used the luxury of balls in your mouth. And you loved it.

@XplosivCookie

10 ай бұрын

@@Cameron-ls3qt You have to make some compromises, he's just proving concepts and then once a step is achieved by doing it from scratch a few times, it makes sense to consider it unlocked and move the series along. Show would never advance otherwise.

@peterfireflylund

10 ай бұрын

Not a hard bar to clear, though ;)

@brendolbreadwar2671

10 ай бұрын

@@Cameron-ls3qtand.

Congratulations on unlocking automation! This feels like such a major milestone. So excited to see what this step allows for the next phase of rebuilding civilisation

@Sentinel851

10 ай бұрын

technically automation comes when he has a repeatable action on the output, not just a sustained shaft speed. but still, kudos.

Probably Andy's greatest construction to date. Bonus footage demonstrating how important it is to plan your crafting for movement outside of the workshop.

I love water wheels. I want to see waterwheel powered trip hammers and bellows powering a crucible steel production plant.

@England91

10 ай бұрын

Not just steel, iron in general would be ideal

Projects like this really put into perspective the sheer amount of effort it used to take to build anything. Nice job!

I think that what you're really learning with the saw rig is that consistency and accuracy are key in better crafting. Nice work on the wheel.

Andy's carpentry skills have improved a lot over the years, keep up the great work!

I can definetly see the improvement on your wood working skills over the years! (Been here since the clear glass/lens series i think?)

@supjay3945

10 ай бұрын

I agree

@oofshapedhuman4974

10 ай бұрын

Just thinking that! He’s doing great

It would be cool to see a compilation video from the earliest technology you have created all the way to the current technology you are on now. Its been so many years and it would be cool to see how far you've come in a visual format.

When I was a kid the dad of a friend had a metal shop powered by a single electric motor mounted near the ceiling. A rod ran across the room up near the ceiling, there were several drums on the rod, and straps, leather I think, ran down to each machine to be powered. There must have been some way of clutching/declutching each machine, but I do not remember how it was done.

@shorttimer874

10 ай бұрын

If you do try this, broken belts whip with quite a bit of force, so when using handmade belts I would build a protective cage around them, leaving some way to replace the belts of course.

@mbainrot

10 ай бұрын

usually they had the wheels "slip" on the belts, and have a tensoner on a lever to engage the ""clutch"" (tbh slipping belts were the first clutches)

Andy, this is what apprentices are for: They work the foot pedal, while the master cuts the piece. :P Seriously though, really nice work. Hope that leg cut heals nicely! EDIT: Spoke too soon... Hope ALL those cuts heal nicely, Mr. Andy Potter. x3

Insane that you’ve made such a range of tools and equipment on your own, from scratch, using things you’ve made previously! I do think you should hire more people, specialised in different crafts, just to speed up the process and get out more videos with improved quality too!

@swag31556

10 ай бұрын

I think half the intrigue of this channel is that someone who has no idea what they are doing (in a trades sense) tries to make these things

@netts2315

10 ай бұрын

I mean he does use modern made lumber and planks bought from a store for this project but you can't blame him, really. These videos would probably be once in a year if he only cut down trees and processed them using the methods he has available.

@nateb1685

10 ай бұрын

@@netts2315 i think where i'm at is he's already proven the ability to make those things and so in my mind, no problem for me if buys them and it means i get more content :)

@netts2315

10 ай бұрын

@@nateb1685 He definitely has proven he can make them, though of lower quality, obviously because of the tools he has available, and as I said, videos would be far in-between if he had to make everything by himself. I too think it's better this way.

@Eagle3302PL

9 ай бұрын

@@netts2315 Any technology he tries once to any success has to be assumed to have had decades of refinement in the next episode. Otherwise he'd spend his entire lifetime perfecting blacksmithing like many smiths did back then.

The way you made that hub fit into that water wheel frame was extremely satisfying, GOOD WORK!

You're officially a wizard now with those scars. Don't rush yourself. If you break up a project into multiple videos it might be easier on your end.

Wow, that was quite a sight! Watching him roll that massive water wheel through the doorway was both fascinating and nerve-wracking. The sense of scale was totally thrown off, and I couldn't help but hold my breath every time it approached the entrance. It really highlighted how challenging it must have been for him to transport such a colossal creation from his garage to the outside. Great video!

Super happy to see you finally managed to reach this milestone, you've been keeping it as an objective for a long while and i'm stoked to finally see you realize it

Your projects just keep getting better & better, as do your building skills! Thanks for bringing us along for the ride!

10:51 You're a wizard Andy!

This is amazing! Very clear how much time and effort went into the planning and execution of this build! Hands down my favorite project to date

No rush, be careful! You'll be working with ramshackle powered tools soon- there is a serious risk of losing fingers if you aren't extremely careful!

The precision of the wheel is absolutely insane. Amazing job.

I have waited so long for this video!

Windmill was very good for grinding grain. You're going to want to study the Dutch windmills that you can literally turn with one person. These are mostly for grinding grain. And you have to remember that dealing with the Daily Grind Milling a family's ration of flour for the day was literally the bulk of somebody's (usually a wife or daughter) workday for most of human history so don't lose sight of that and you need to remember to keep that taken care of as you go forward

@ermakers1297

10 ай бұрын

A lot of the Dutch windmills were water pumps since the farmland was below sea level. The pumps helped keep the land dry.

That's amazing you're able to line those cuts up so well with the tools available! Please add safety covers to your industrial saws!

So much love to you and your channel! Nice to see you back in the swing of things! Saw that fire extinguisher on the side of the workshop!

This project is a true demonstration of endurance. Great video. 😊

Cool. As you may know, watermills and windmills were super common in the Netherlands, as we have lots of both. Common uses of watermills here were, making copper plates and making paper.

For running the saw make the crank pull down on a rope tied to one end of a seesaw lever mounted above your saw and water wheel, and tie the saw to the other end of the lever. Add weight to the saw as necessary.

I love this series. Andy you are a real trooper sharing where you get hurt. That takes real courage.

This is a huge leap in productivity, I can't wait to see what you make next!

The pedal sawing is absolutely amazing. Nice work.

I've been waiting for this one! So excited to see what is next. Congratulations!

This is such a great channel. History, engineering, and the struggle of human growth. Thank you for sharing this journey.

It has been really cool watching your building skills grow over the course of this series. This is def your best built project yet and I'm excited to see what follows as a result!

very proud of you and what you've been accomplishing! Great job Sir Andy

If you stain your wood then seal it with tung oil it will last so much longer. Brilliant build!!!

@KainYusanagi

10 ай бұрын

Tung oil is about as waterproofing as (non-culinary) walnut- that is, not very. If you want waterproofed lumber, go with a linseed oil. Then use a shellac like pine resin as a finishing coat, in place of something like polyurethane.

@Bellllllz

10 ай бұрын

@KainYusanagi tung oil has been used to seal ships actually, but linseed oil is great too! Honestly even torching wood would be better then just leaving it bare.

@KainYusanagi

10 ай бұрын

@@Bellllllz Yes, and so has walnut; that doesn't mean that they're good at it. Tung oil does dry on its own, but it takes forever to do so and doesn't provide the best waterproofing, while walnut needs heat to break the proteins from the oil and allow it to harden (but is otherwise basically the same as tung oil functionally); linseed is significantly superior in waterproofing, and even slow-drying linseed dries faster than tung oil, while providing a superior waterproofing finish. Tung and walnut are more for land-based wood items, things like teak or oak furniture and similar (in fact, several tung oil formulations that included thinners and other oils were actually named "Teak Oil") where the finish can keep curing for months, if not years, and the rest of the finishes' properties are desired far more than waterproofing.

@revilo00

10 ай бұрын

Tar would also do the trick

@KainYusanagi

10 ай бұрын

@@revilo00 As would creosote, yup.

It is finally here! The moment we have been waiting for, the next big step! It is the most precise creation yet!

Amazing to finally see you make it to this point. Been years in the making!!! Congrats

The aesthetics of your water wheel are on point! Your extra effort is going to be worth it, and it’s very impressive.

Probably one of the best things you've made yet! very smooth.

i've been watching your channel for years, and i must say i love it, you guys make youtube a better place

I've never been so eager to watch the continuation of a series of videos. big fan

Great job! To connect to tools, yes, making gears will work. A circle with a bunch of spokes in the sides will make a gear, and the half gear rig is a great adoption as well.

As always, your work is an inspiration Andy

This is awesome! I know not literally everything is hand produced, but seeing this get made by tools and materials you've taken a crack at generating before is fantastic! You really get the feeling of accumulative effort

Where I live here in South Wales you will often come across a hulking old watermill wheel, or a space where one used to be. Love this channel, very inspiring!

Cool, looking forward to see the future of the waterwheel!

I am truly impressed! And I can't wait to see what you will do next.

havent been following super long, onl;y a year or so, but already proud of how far youve come

Grats dood! You are an inspiration for all your hard work!

It took a lot of skill and attention to detail to build that water wheel. Well done.

Fantastic, you always go above and beyond

I remember you talking about this more than a year ago, so glad you finally got to do it

THIS IS INCREDIBLE.I can't belive it,the work that you put in this is just on another level.Keep this up❤❤💪😎👍

What an incredible build!

Best channel on you tube. Just humility hardwork and the most important knowledge in humanity

Absolutely amazing. How far you've come!

«trying to harness the power of a dog has proven to be a little more challenging than expected» is a sentence I never expected to hear

Damn boy! Woodworking skills are next level!

Aesthetically the most pleasing thing you’ve made!!! Man that’s some beautiful engineering

Wow 🎉 your carpentry and building skills have really improved over the past years. Awesome project

Impressive commitment! Keep the content coming!

Nice work, its moving way smoother then I could have done.

So trippy when you were rolling it. I could never tell when the wheel was going to hit the door way 😂 it’s like the scale was off

Dude that's so cool you built that been waiting to see this video

AHHHHH SO EXCITING! What a journey it's been!

This....was FRIGGIN' EPIC.

Common power transmission method was using leather belts. The wheel was used to drive a shaft and machines were hooked to that shaft via leather belts allowing individual machines to be engaged or disengaged as needed. This was particularly useful for factories and driving mass numbers of machines. The same system also worked well later on with steam driven shafts. Using a belt to connect the drive shaft to the offset handle/shaft of the saw would work well.

It's been cool to see his woodworking skills improve over time. Very impressive wheel!

From the stone age to finally, POWER! You must just be thrilled to continue on this labor saving stuff.

Punished snake cosplay is coming along nicely

Blood sweat ash and tears have gone into this series. Extremely impressive wonderful work.

I think you made it quite big. Right now, with so little water and pressure it is working fine being feed from top, but if you want to increase power, feeding water in the middle with more pressure might be better. The top feeding is prone to splashing with higher power. If you would want to go in historical order, I think bottom fed water wheels are earlier invention and for sure are easier to make. They can be made literally with sticks and rope, although their power is limited and depends on speed of the water. But on the other hand, it does not require waterfall.

So much respect for the crazy amount of work you put into the projects and the channel! I've been following your work from the first sandwich you made. I'm so glad you kept going! Thank you!

As a long time wood worker, my younger self is full of enthusiasm for hand crafting such things and am reliving some dreams I once had of making some of the same. My older self is saying, "Are you kidding, that would be another heart attack in the making!" I admire your determination, and have subscribed to live out my youthful desires instead of adding to my health issues.

To connect it to your saw to your wheel you need something like a Scotch Yoke. It converts rotary motion into linear motion. And it's incredibly simple to build.

This is so amazing!!

just that scare deserves a like, since it's a really indication that you are working really hard on this.

Hell yeah this is awesome!!

You did a amazing job with this video

This dude is going to turn his backyard into a swamp! 😂 I love your channel, brother. Your commitment is admirable!

Old factories originally used a use a main rod with pulleys and leather belts to power machines. You could attach a rod to the center of your water wheel, put a pulley on it (wooden or metal) and connect it to a pulley/cam setup on your machines. The added bonus to this setup is that the machines can be turned "on/off" with tensioners on the belt. Simple machines FTW

have literally been waiting for this vid since i discovered this channel

It's nice to see how woodworking skills have grown, in any case the project was not in vain.

I love the style off useing only the rescoursec you have and making beautiful creations

Dude has been getting muscular operating those tools by hand. Congrats on the next step!

Bro I was just watching ADVOKO makes and now this?! Awesome bro!

@murphychris9811

10 ай бұрын

advoko is the best

Why have I never heard of this channel? This is awesome.

An in-between mode, for places without a strong water source for example, would be a windmill as a water pump to send water up into a tower or into a manmade storage pond, then letting the water down through a waterwheel or turbine and back into a lower reservoir to be repumped. This keeps you from being dependent on the vagaries of wind through the working day and allows you to bank away that power to use continuously later.

Water wheels are so cool!

Water wheel power is so fascinating.

7:14 I kinda love that you're sawing all your own timber.... except you left the store tag on the timber, showing you bought it already cut into prepared lengths. The blue industrial dye on the end of the piece later in the video too lol

Man, that saw really improves the quality of your work. Definitly a good project to have completed before you started on all these other big wood project.

This is awesome. What a great channel

Absolutely awesome! :D

Nice to see the waterwheel you made. Had thought of a project that I might build one day. It involves a slow rotating waterwheel fed by a solar powered pump. I'd build the waterwheel slightly differently for my application for easy of construction.

Yeowch! Huge congrats on the accomplishment :)