Time to make my own vehicle? What kind of vehicle should we do first?

@The_Guy_That_Bikes

6 ай бұрын

Trophy truck

@wyattrosman5162

6 ай бұрын

Make a crawler with portal axels with an engage able 4 wheel drive and a realistic drive train and lockable diffs 2 speed transmission

@Anti-Smart

6 ай бұрын

Crawler/Buggy with four completely independent wheels. [No linkages between each wheel except for a central cab.] May be easier to do with all wheel drive[one motor per wheel] & all wheel steer.

@akidafloof

6 ай бұрын

Seeming as you can't keep your car off the wall, how about a demo derby car

@Rade1664

6 ай бұрын

I would say build a more complicated gearbox than a 3 speed slider, then build a race car around it.

It would be fun to see combustion engines added- would give more use to gearboxes

@thundervallie

6 ай бұрын

Internal combustion engines are on the roadmap! May be a thing in the future :D

@fatitankeris6327

5 ай бұрын

Engine Sim incoming

If only this game had multiplayer.

@flabort

6 ай бұрын

Multiplayer is on the roadmap, dev has said feel free to upvote it on the roadmap. Not sure where the roadmap is, but there's a good chance of it coming in 2024.

@cyber92943

6 ай бұрын

Yes

@apersunthathasaridiculousl1890

6 ай бұрын

Fr

@chillieuwu

6 ай бұрын

If only this game was on console.

@thundervallie

6 ай бұрын

@@flabort I would not say a good chance, it’s a very big project :D But I do hope so.

would love to see you build a solid axle rock crawler with a ton of suspension flex using a transfer case for high and low range with a transmission. maybe locking and unlocking differentials?

Can't wait to see you start working on your own vehicle. I care more about the mechanical bits than what it looks like, so if it's a box it's a box.

For the wobbly, you can install what F1 (and most other race vehicles) use, steering damper. This would be a shock absorber attached to the steering arm in the center, with the damper centered when the wheel is (obviously). This should also help to control understeer a little, as the steering would be smoothed, even with controller smoothing off. I wonder for the drive gear, could you make some sort of one-way clutch? That would put an end to the over-rev wheel lockups.

Make a transmission with reverse and lots of gears, that would be awesome

14:40 I was wondering how they'd do a push rod suspension if they were to be Formula accurate

The physic looks fabulous. Specially the driving grip: it looks like better than most dedicated games

Wow this is awsome. I'm so happy to be seeing more of this game from you Kan!! Gearblocks is simply awsome.

Previously, you talked about converting your Lego F1 car to RC, but it has a bad steering radius. I too have one, and found that there are some tan stops on the underside of the car, and if you remove them the steering radius gets smaller.

looks crazy good so far, sort of what I always wanted from a game. Gonna try it out in the coming days and I hope to learn some mechanical stuff along the way.

So glad you found this game. Within 7 hours i was working on an awd mid dif full independent suspension car with a 3 speed, this game is amazing.

This kind of reminds me of making a RC car. I have been hesitant of picking this up but looks great

I know it would be pretty difficult but, seeing a six speed drag racer would be awesome. Just trying to see how fast you can make a car go and accelerate in a straight line.

I really love the way you keep making theese amazing videoes! I hope to play the game by myself one day.

Dnk if this would be fun (to me) to play. Sometimes things are funnier to watch than to do. Maybe I'm just gettin old. To watch though, its a hell of a game! ❤I love it!

That last wreck was spectacular!

More gear Blocks yaaa

I love gearblocks

I love this game so much, keep playing it kan!

This game takes the best from scrap mechanic and the best from trailmakers

These GearBlocks videos are great, apologies if this is a siliar/dupe message, just wanted to help out by sharing a few "expert" parts I have a few part collections on the work shop that may help, like a 2x2 differential and 0.125 parts

i enjoy the sweet sound of straight cut gears i think this is the new goated scrap mechanic like game

The physics in this game are amazing

Keep the good work up!

The way that front suspension collapsed was really similar to what happens in real life when they have a big crash. Wheels just hanging on for dear life.

you can use the rack and pinion with the stepper motor to build the transmission

Awsome video brother ✨

Classic, warm up lap was the fastest.

Wonder if a full transmission with a clutch is doable - have the motor running constantly, and shift between reverse, neutral, and the drive gears

@1mariomaniac

6 ай бұрын

You could probably make a pseudo-clutch mechanism by having two crown gears (on the crankshaft and on the input shaft) mesh when a piston is extended. It wouldn't be very realistic because a real clutch can be partially engaged, but it'd work for these purposes.

A perfect demonstration of why Halo's where added to F1 cars xD

I would love to see some of the T-180’s from speed racer in this 😂

Love your videos!

I had to subscribe. KAN you're the goat

This time it's for real, less goooooooo

20:24 Tbf, it's only a little bit too much rotation on the wheel, as F1 cars actually have 360 degree steering rotation, they just bascially don't use it other than for the Monaco hairpin

You should race the cars in first person when you're trying to put down a serious lap, as your steering inputs are more accurate to you. The third person has the camera rotating, thus less accurate steering👍

Were the rear wheel treads opposite from each other? Maybe that's the wobble? IDK how much fidelity it has simulated in with that.

Next video please do the old tractor!!! Good videos kan, keep it up

I'd love to see some more off-road stuff, maybe a trophy truck?

The valves in the shocks need to be switched for smaller ones, you definitely need a stepper motor and the gear ratio on the steering rack needs to be a lot higher and I think you’ve got yourself a nice race car

The perfect drift car can exist 😁😁😁

love it

I WANT MORE OF THIS GAME this game is really cool i love it i am glad that i didn't bought trailmakers for the full price also i am curious if you would put the spring facing the back and front and make the mechanism for it how well it would translate and also if a "hinge" is over loaded how would it behave like if it would fly out like in scrap mechanic

Well, I just went ahead and building a hypercar as my first build. I´m already 10h in and got the rear, and some of the cockpit finished.

Destruction Derby with the boys lol

As a race car enthusiast I take speed champion sets and rebuild them, into the same cars, but closer to what the cars look like.

I'm thinking you might have to get into some logic to make a compact transmission or at least make a display that tells you what gear you're in. I'm not fully sure I'll have to get the game and try it myself. I'll love to experiment with it.

In the front an f1 car no ponger uses cantilever suspension system they use whats called a torsion bar which twists a bar and that bar is essentially the "spring"

Oh my god I WANNA SEE MORE and u need to make engines like one guy said u need to add like valves and rockers and stuff

I mean, you keep saying this game is like Lego, but I'm honestly seeing this as virtual Lego Technic. Technic were the sets with the plastic wonky frame pieces with the interlocking pegs and they sometimes had an electric motor. Like there's a Lego Technic Train that both has a motor onboard the train, but there's also a switch that runs off of a motor as well. I don't know if they're making new ones or if they're still making them at all. I just remember them growing up. If you wanted pirates and castles, that was normal Lego. If you wanted like a Ferrari that could possibly go on its own (by motor or rubberband winding) that was Technic.

@flabort

6 ай бұрын

They def still making them. I got a semi truck a couple of Christmases ago, no motor but the engine moves when you roll the tires, and there's a cargo container on the back with a crane, so you can use the rotating knobs to lift the container off the trailer and deposit it next to the truck.

@1mariomaniac

6 ай бұрын

​@@flabortI've got a few cool technic sets too recently. A pull-back hot rod, a go-kart with a little engine, low, neutral, and high gears, and a cool little steering rack, and a little speed boat with hidden wheels on the bottom that rotate an engine and prop on the back.

Wow the destruction physics really deliver in this game! Too bad it doesnt have a multiplayer aspect (yet?).

Me after that video: Shut up and take my money !!

I forsee builders comps, like build a race car and then have a 5 series tournament lol SN: you need anti roll bars :)

The best way I found to do sequential gearboxes is with a stepper motor and rack gear instead of a piston.

Look at the rod in the back that sticks out it will tell you what gear you’re in

At 26:44 the character walked at the speed of the F1 car

Holy

It's motor layout is very similar to formula e cars but they are only supposed to have one motor directly connected to transmission.

Thats a torsion bar, which is actually what they use in F1 cars

Make a geared (shay, climax, or heisler) locomotive. Just replace train wheel with normal and for now make the electric motor run the pistons (for aestetics).

And now, we wait for an actual engineer to make a drift car that makes 30 sec laps on this track

Workshop hunters, but with kits

Its not called a cantilever suspension (although that does exist, just a different kind of suspension) its called a pushrod suspension.

20:47 damn this guy is a crash dummy! Shadow reveals lol

my one has cantilever front and rear on off-road setup.. traxxas nitro slayer lol

I hope this comes to console I really do, this would scratch a itch I've been having that trailmakers isn't scratching if you know what I mean 🙌

When is the Railroader Episode?

Making a mech would be fun... Although laggy...

Yipee.

Man U should make a drift car

I made a pretty good transmission with clutch gears

I'm struggling with learning the building mechanics, this looks unparalleled in terms of making proper vehicle dynamics but I have yet to buy the full game.

PLEASE TEST IF CAMBER ON THE FRONT HELPS TURNING!!!

WAIT WAIT KAN WAIT railroads online has cattle

if only i could afford to buy this. or really any game for that matter.

Feel like these vehicles are missing swaybars. But not sure how you would accomplish that if this game doesn't have torsion bars.

You cold buld a working steam engine

Diffs have 4 spider gears all of them never have came across one with only 3 spider gears and they have pinion gear for the input that the other part in having trouble with

what game is this

Thank god for halos

I’m annoyed my specs barely meet minimum for this, I’d buy this game in a heartbeat. 3 speed gearbox looks cool, but I bet it could be improved.

I wish the car had slicks

Make a torsen differential with two worm gears. Search "lego torsen differential" if you don't know how.

There are two things surprising in the comments

Railroads online has a new locomotive now. Pls play

Why is this game not available on linux

if only this game was on console

Bread

5 speed transmission

three wheel car thats all i have to say pls make a three wheeler

The destruction of this game is so satisfying

@1mariomaniac

6 ай бұрын

That last collision with the debris was awesome

I don't get why youtubers don't use follow cam. It is always terrible to view it with the sudden moves to trying to keep up with turns. Motion sickness to the max

Forget a race car build a drift mobile

guh

11m

13th

180 degrees total???. no its good in the game sorry kan

Rail roads online 😢