2 stokes banned in Europe??? We have street legal 2 strokes here in Europe😂

@homelessmike2068

Жыл бұрын

indeed, legal or not well drive them! :p

@noidontthinksolol

Жыл бұрын

2strokes banned in europe? ive been riding 2smokers all my life and im from Belgium

@noidontthinksolol

Жыл бұрын

almost all our mopeds are 2strokes lol

@noidontthinksolol

Жыл бұрын

Americans tend to have some weird ideas about how Europe works in many cases. Then they go on and talk about how they have guns. while i have 7.62 "AsSAuLt rIfLeS" right here in europe lol.

@2strokerides

Жыл бұрын

@@noidontthinksolol I'm also from belgium, also a 2 stroke rider :D

You have to admire Vasily the way he goes into builds/mods in such a genuine way with humble confidence too.

Looks great, you have such a good attitude towards building. No aftermarket swingarm so you make your own . The bike is incredible

I really like this build. Looks so Nice the 4 inch stretch! I cant wait to hear it rip!

Its honestly insane how good your are at this kinda stuff. Im about to be doing a engine swap on my grom and this gave me some motivation!!

2 smokes aren't banned in the UK, but thankfully, we are still in Europe, but thankfully now out of the EEC ballox and still race & use them on the roads, This would be crazy set up as a supermoto, keep the great videos comin

Your the only person I would trust to weld a swing arm😂

Every single video that pops up just by the title and pic I have to click and watch every time🤣 this man’s videos are just pure gold no one is doing it like him💪🏻👏🏻

This is coming together nicely! Looking forward to the full send.

This build turned out awesome man, nice work as always 👏

Word of advice from a 58 ur old builder of almost every type and brand of engine known in America,always use assembly lube on any and every rotating or moving part when assembling and only use the best quality oils you can get for both break in and first short changes to the oil and fluids... Once it's up to operating temps,run it through semi heavy heat runs for up to 15 minutes 3 to 5 times,drain and change oil/fluids&filters, rinse and repeate.. You're fully broken in and ready for wot flogging IF YOU assembled it correctly,used loctite on every screw,bolt,nut/ fastener and torqued properly... Also getting the fuel to air ratio stoichiometry close to 14.5:1ish immediately after fire up..

That bikes going to be crazy can't wait to see it

Bring that beast to the Oregon Dunes and throw some sand around with me!!!

This Beast is Sick Bra !! Very Well Done 👏🏼👍🏼

Love this build Vas. So sick. Looks amazing with the restyle kit.

Yes! The first dedicated dune bike I've seen. Awesome!

crazy one man show 💪🏽

cool bike build. can't wait to see it run in the sand dunes.

That bike is going to absolutely rip man, solid build as always.

Beautiful bike! I like how you make all your own bike modifications. I love it!

Awesome talent, virtually limitless! Stay safe and keep having fun!!!

You should come up to silver lake sand dunes this summer. I'd love to show you around the dunes

@benmiller5015

Жыл бұрын

I was actually thinking of asking him which dunes he's gonna ride n if he's heard of silver lake dunes lol crazy that someone else is like dude hit up silver lake lol

Is there anything u haven't put a banshee motor in? Awesome build as usual 🔥

U really need a proper exhaust for this build. I saw a video of the 700cc 2 stroke "megaladon" where HGS built a custom pipe and silencer for it. Maybe they can help.

@VasilyBuilds

Жыл бұрын

This will work fine

@Berm_Blaster

Жыл бұрын

He just likes having some ragged hillbilly rigged piece of crap

@jpesicka999

Жыл бұрын

@@VasilyBuilds word

@Berm_Blaster

Жыл бұрын

The pipes just look terrible lol

I enjoy watching this guy. Nicely done!!

love the two stroke builds you should get this thing on a dyno if you can

You ended up looking a little tired! I would have passed out from the stress of not fkn’ up ! Great job! Truly professional job!!

That was a proper weld job! So often people just but the two sides together and then grind. No penetration .

Bike is looking sick!!

thats gonna be a whole new beast , this was fun to watch- thanks brother

Yet another very nice build. Keep up the good work and be safe.

It is looking like a fresh off the showroom floor bike. Great job.

Awesome build so far!

Dude keep up the good work as some one who welds and builds bikes ( im not even close to ur level) but I appreciate how you go about ur builds keep it up man

Ur amazing bro we appreciate everyone of ur videos please keep them coming 🔥🔥🔥🔥❤️❤️

a banshee swapped, stretched, dune bike. this mans going places.

great job lad keep up the good work

Crazy build vasily

Always enjoy your videos, this was no exception AWESOME BIKE

You’re a legend!! love the new look!!!

Can't wait to see it Ripp

sweet build as always

Badass build bro u make it look easy

That's pretty sick my boy👍

I can't wait to see that thing rip😮😊

So sick 🔥🔥

Great video bro

Love the Banshee engine... Just a cool platform..

2 smokes aren't banned anywhere in the world except for Califreakinfornia and some gayted communities across America.. 2 smokes are still legal almost everywhere except they have mandated cutting back on any new smokers,instead demanding only 4 strokes or electrics now... Great build and hopefully it'll turn out to be an amazing burner that makes your balls shrink up and crawl inside when wicking that throttle...😂 Kids nowadays have no clue but I think Vasily has caught the mixer bug and embraced it totally... 😊

There's something about a 2t parallel twin that gets me excited..

That is really sick!!!!!!

Amazing!

I literally can’t go 10 minutes on my way to school without hearing or seeing an obnoxiously load 2 stroke moped screaming down the street at 45 km per hour

Your welding looks better and better in every video.

awesome job man. i have enjoyed watching you hone yours skills. you remind me of my younger self

Them restyle kits make such a difference in looks

Great-looking build

Looks great!

This is so sick! If you’re near northwest Oklahoma little Sahara is where I ride dunes, would love to connect and can always hold a camera for ya lol!

Your a maniac dude. Flat out bad ass. Get this man a whiskey!

Yes!!!!! Please take it to the dune soon!!! And maybe a pro rider to real show what this awesome machine can do!! Love it!!! Thanks from a 46 year old Norwegian that has always wanted to go to the dune’s! Sick sick bike!!!! If you was going to sell it..what would the price be?

Have you had any issues with the front tire scrubing the pipes?

Could probably be a good hillclimb bike, too. Nice work.

Insane as always!!!

@VasilyBuilds

Жыл бұрын

Thanks brother!

You sir are the man always look forward to your videos. Keep it up and God bless!

great stuff thanks

Hey bro. Just a word of advice. always use loctite on all the screws and nuts inside the engine. Eventually they vibrate loose and will tear stuff up. Build looks real sick💪🏾

Boy howdy your not as silly as I thought nice work on the swing arm

Magic mate👍

Most impressive as usual! Thank you for the continued uploads interest!

That motor is absolutely beautiful.

Vas, thanks for the awesome content, Preciate it 👏🏾👏🏾

@VasilyBuilds

Жыл бұрын

You bet

Yea looks killer bro 😎

I would love to have one ur bikes dude u do great work keep it up 🎉

take it to the dunes!

yo dude that thing is awesome

Hell Yeah Brother 😎

Hahaha more money than sense in that build ! Each to their own 😂

What CC's are your cool head domes? It should say right on the side of it. (but I guess you already put it together)

WOW that's so amazing with your build you amazing with the best of the best job very well done with it

One of the European continent's surprising (and only) advantages over us here in the States.... They're still Braaping new Braaps. KTM, GasGas, amd Husqvarna all have current machines that are 2 stroke. I know all three of those companies are owned by the same parent, I'm just making the point that 2 strokes are prevalent, and a lot more advanced, than most people probably realize.

I'd love to build something like that. I just got a four wheeler/go kart thing off a guy that put a 94 Suzuki 300cc four wheeler engine in it. If only I had all your equipment!

Awesome build Vasily ! Can you fit a wider tire up front so it doesn't sink in the soft sand,and to give you better control?

@mossoconnor4417

Жыл бұрын

You don’t need a wide front, just more throttle

@tassiejeeper01

Жыл бұрын

Typically run a "fatty" on sand with is a 90 instead of an 80, (80's are better everywhere else for 90's are better for sand)

Vasily you rock

That front wheel doesn’t hit the rad on full suspension compression?

Make sure you bring a LOT of water when riding this at the dunes. Get one of those 3qt camel packs.. It's like a little back pack that holds water. Because riding a dirt bike at the dunes is a WORKOUT; depending on how much you ride. It's not a comfy cruise like it is on a quad or a buggy. you're constantly wrestling the bull by the horns and fighting for balance a lot more often. So just bring a lot of water and keep your energy up. Trust me

Man I had a hard enough time keeping my KX125 in control, I can't imagine that bike, crazy lol...

How many CC's are your cool head domes? The banshee I currently have came with 19cc domes, and I think that was too high of compression; for race fuel, and I don't want to buy that sh^t. So I put in 22 or 21cc ( I forget now)-- but it seems to have slightly week compression, so I think I'm going to bump it down one size. What size are yours? (I'm sure it's different anyway, with it being such a bigger bore.

How much did one of these builds cost and what was that app you have on your phone when you were installing the clutch?

Cool any plans for the motor u took off

Hill climb racing is super fun as well.

Looks sick, IF the pipes fitted better it would be perfect👍👌

Put a Harley in it loads of low end power , the banshee motor is good tho 😉 I like it 👌 nice work

I see no red and no blue loctite.. maybe it'll stay together even though he was yanking on the torque wrench rather than pulling slowly and squarely to get a true torque value... Fingers crossed that he snuck up in small increments to total torque values as it's steel or metal into aluminum blocks/cases...

@mansikkamies9146

Жыл бұрын

You would go crazy if you saw me rebuild an engine

Great build. Would make a great hill climb bike too. Have a friend up here in New England that races along with his whole family. You should come on up and give it a try?...🤓

If noone else said it yet " Hill Climber " !!!!!! "Beast hill climber

You should have drilled holes in each side of the existing swing arms so you can weld through to the inner tube, making it stronger. Still a great job regardless

@davidjensen6542

Жыл бұрын

I was going to say that

Plz get a break line guide that goes on the front number plate that's messing with my OCD

Good job

Case savers are designed for the chain breaking.. nothing to do with sprocket size.. when the chain breaks it tends to bunch up between sprocket and case and brakes the case