Proper professional DIY! Thank you for sharing this 💎!

@HMProjects

Ай бұрын

Your very welcome 😊.

Hello! Nice work! Have you used a logical mosfet or a regular IRFZ44?

Молодец !!!🇧🇧

It‘s pretty cool! Thanks for sharing. I have the idea to put it on my Makita Batteries. 👍

@HMProjects

Ай бұрын

Thanks, pretty cool idea and if you have a 3D printer you can make an adapter for it. The batteries are 18V or 24V?

@derpw

Ай бұрын

@@HMProjects yes I have a 3D Printer and the Batteryadapter for Makita. The Batteries are 18V. You see any problems with it?

Another well build diy Project. Heating time ist akceptable. I really Like your Projects.

@HMProjects

Ай бұрын

Thank you. 😊

Very excellent project, construction and video. It very much appeared to me that you had missed some solder joints, on the main board. They were possibly the jumper wires? Here, in the USA, we have a name brand spray paint that is a clear, fast-drying enamel that is safe for plastics. I would post the product information, but YT would just delete this comment. As you did not apply a solder mask, you might spray your boards with a similar product, for protection. Cheers!

@HMProjects

Ай бұрын

Thanks, I didn't missed any solder joints, those are unused pins from Arduino board so there is no point to solder them, it make it easy to change the Arduino board in case it happens something with it, and lastly I have a bottle of dissolved kolophonium in isopropyl alcohol and I spray the boards with it, it offers good protection and it make easy of solder or desolder components on the board if needed, basically is a flux applied on entire board, the only small disadvantage is that it takes a little bit longer to completely dry, but I do not recommend spraying the board with clear varnish because if you desolder something on the board it makes it harder to do and it leaves a black melted varnish.

teria como montar uma estação de retrabalho completa com ferro + ar quente

Excelente proyecto ecxelente

@HMProjects

Ай бұрын

Thanks 😊

Please Build one with C210 Tips

Hi, what model of soldering iron handles this project? Thank you.

Excellent ❤

@HMProjects

Ай бұрын

Thanks 😊

Well done sir, from your circuit how am i going to connect soldering iron handle with thermocouple and heater.

@HMProjects

Ай бұрын

Thanks. First you have to measure it with a multimeter, the heater will have around 8 Ohms and the thermocouple has a lower resistance, but pay attention that thermocouple has polarity, and on the board first pin from left to right is heater, secont pin is thermocouple and the last to pins are ground ( they share the same ground ) I will add some pictures with the connections in the files folder for better understanding.

Nice project!!! I think that an encoder instead of buttons is better for work!

@HMProjects

Ай бұрын

Thanks, along the way I will update the software to include functionality with the encoder and other small improvements.

Hello, excellent job you can make a video of how diseñar los pcb

@HMProjects

19 күн бұрын

Hi, thanks. Yes I probably will make a video in the near future.

nice

@HMProjects

Ай бұрын

Thanks.

is this possible with t12 T12 display not working Thanks for sharing

@HMProjects

Ай бұрын

It will not work with T12 tips. What do you mean display not working, is not working at all or just the temperature displayed is not working?

@Edmorbus

Ай бұрын

I have T12 Soldering Station OLED display not working

@HMProjects

Ай бұрын

@@Edmorbus Try to put a new display. Did you buy it or make it yourself?

@Edmorbus

Ай бұрын

I can't find the display

Why not use rotary encoders

Please tell me how to change to tip t12 or other types

@HMProjects

Ай бұрын

I have 4 soldering stations projects on my channel for T12 tips, see those videos. Thanks for watching.

Next t12 - esp32 and phone app?

@HMProjects

19 күн бұрын

That would be interesting to make, maybe in the the near future. Thanks.

Waste of time watching this.. it needs to be a bit more descriptive, question: is it a pesnol soldering iron, or a personal soldering iron ? I’m confused…. As I said , waste of time

@HMProjects

Ай бұрын

Sorry to hear that, to answer your question it is a Pensol soldering iron not personal soldering iron, I'm not sure if this tipe of iron is available every where in the world but is quite common here in Europe, there is nothing special about it is just something that I had laying around it is a simple iron that has a heating element and a thermocouple type K as a temperature sensor, actually this station it will work with any soldering iron that has a thermocouple type K like Hakko 907 if I remember correctly.