Just did this this morning. Thanks for the video. Anyone doing this make sure you cut the vent as far to the right as possible, you'll need the clearance. And like others said pvc saw worked in minutes. Thanks again for the video.

I know it takes longer but removing the dash wouldve been cleaner. (I did mine) Glad you got it out. Your disassembly of the HUD was helpful for me to fix mine to see what it looks like. Thanks!

Bad design from GM that the duct is on the way..had to be a way to disconnect the duct with out cutting it

This video helped me out with my hud. Great video man!

@x03736

6 жыл бұрын

meartman Not a problem, glad i could help

👍 YOU ~ ROCK ! ! 🤛

Good job bro!!!

Thanks for showing this, I am going to do this next week.

@panzerwaffen2873

6 жыл бұрын

onelegorg did you do it?

@Tommyoneleg

6 жыл бұрын

Not yet, because I replaced my shocks and springs instead. Got a deal on z06 springs so I decided to get new z06 shocks and just replace them all, I have 85k on my vette so it was time. I am going to get to it, Hopefully in a week or two. I do all my work in my driveway and I need great weather to do it but I live in Upstate NY and the weather sucks most of time.

@panzerwaffen2873

6 жыл бұрын

onelegorg ok you bro... Down here on miami you won't have that problem

@Tommyoneleg

6 жыл бұрын

Just fixed my HUD the other day, everything went rather well but to cut the duck I used a PVC pipe cable saw. I also replaced all the screws in the HUD and put washers on them. Every screw head was rusted bad so I just replaced all of them. Also it would help if you don't have fat hands like me, the two Nuts in the back on the HUD were hard for me to get to but after a while I got them. I wanted to say thanks to Texas, this video helped a whole lot, Thanks man. Also love all the videos you do, they help a lot.

Nice!

PVC saw To cut the ducks

@spencerlorrigan

3 жыл бұрын

Good tip, thanks! I was thinking there's gotta be a better way 😂

So the dic switch is no attached with bolts just pull it out and that's it??

@x03736

6 жыл бұрын

panzer waffen There are screws or bolts retaining everything but the gauge cluster bezel

@panzerwaffen2873

6 жыл бұрын

Texas HorsePower got you..thanks buddy .. ✌✌