Hay I'm 80 years old that is a tire machine up front I know I used one of an on in my day . I came across your channel enjoy your video .I be watching 👍

@betweenthesharksgarage

2 ай бұрын

thanks man welcome aboard

That 8274 Warn winch on the Nissan is money my friend. 194,230,250 sixes have motor mounts straight across from each other, 292 has offset mounts and taller side plates for lifters/ pushrods 6in tall i think. Duel points are so you can have two different dwell settings for a broader spark curve over a broader RPM range.. The twin dash insterment cluster i believe is from a c3 vett. the one behind it should be for a square body truck. Congrats on the new property.

@betweenthesharksgarage

2 ай бұрын

thanks for the info. i am looking forward to getting into the nissan... cause... why not... but i am not expecting much out of it

@tombrown879

2 ай бұрын

@@betweenthesharksgarage well if anything you could put the winch on a trailer or on the front of your blazer or just mounted to a receiver hitch so you can use it on all kinds of different things

@EddieSegars

2 ай бұрын

@tombrown879 I’ve got one of those winches I’m working condition how much u think there worth

@tombrown879

2 ай бұрын

@@EddieSegars Different years and models of the 8274 go for different amounts. but used ones in good working condition bring somewhere between 350.00- 1,800.00. do research online to find which one you have. and go on some of the forums that cover these to get more accurate pricing.

@paulneron375

2 ай бұрын

Get that stuff on-line fast. You may have a (ROI) return on investment, on this property. Remember peoples is watchens'.

My brother from another mother. We think alike, I always buy "diamonds in the rough" and polish them. It is the only fun way to go through life. -Just subscribed.

@betweenthesharksgarage

2 ай бұрын

it is the only fun way... welcome aboard!

@philliplozano7326

Ай бұрын

You have one too.any riding mowers my friend.. 😁

lots of stuff worth saving especially the Datsun 4x4!

Amazing man! What a blessing that you could pull that off, can’t wait to watch more.

@betweenthesharksgarage

2 ай бұрын

blessing indeed

I love that old bead breaker and tire mounting stand. They are a great device for mounting and unmounting tires off steel wheels. I have never used one to work on an alloy wheel, but I'll bet it can be done. If that Chevy bellhousing will fit on the 6 banger, then it is most likely a 250.

Those 4 mounted wheels are American Vector mags. I had the very first set ever sold on my 66 fastback 427 Corvette.

@betweenthesharksgarage

2 ай бұрын

thats a cool story

Looks like Puddin’s Fab Shop’s old garage! Congrats man, gonna be a sweet place when you clear out a thing out two!

@betweenthesharksgarage

2 ай бұрын

it does kinda.... his place was much tidier

@SegoMan

2 ай бұрын

@@betweenthesharksgarage I see no cracks in the cinder block walls, I'd say you got a good structure. Just put a new roof on it and some paint on the walls..

That wrench on the wall looks cool and antique

Very KOOL Congratulations on the new Place looks like a interesting build

@betweenthesharksgarage

2 ай бұрын

thanks defiantly an adventure

That's gonna be a heck of a lot of work but well worth the effort. Cool place!

That little Datsun truck could be a great asset, provided the chassis ladder is still in saveable condition. They are simple to work on, and super reliable if you take care of them. If the chassis is totally fubar, then you can simply part it out - there are bound to be people looking for 80's Datsun parts. Good luck with the shop, you're going to have loads of fun! 😀

@betweenthesharksgarage

2 ай бұрын

We will dig into it. It seems to have been wrecked a little or clobbered by a tree a little but we will dig in. It looks like fun

Well, I just tripped over your channel on my front page, glad I did. Subscribed toot sweet, lol. Looks like a LOT of projects in that ol' shop. Lawn tractors are on of my many jams, I like that red unit, is it a Murray or a Roper? Drop by S.K.I. sometime if ya need to take a breather. Cheers from Alberta!

@betweenthesharksgarage

2 ай бұрын

Thanks dude. The two in the garage are Murray’s. I look forward to checking out your channel

that G.M. Rally wheel hanging on the Wall is worth something you cannot find those Wheels plenty full anymore they are very hard to find and when you do find them you pay thru the nose for them especially if they are in good shape that one looks maybe like it is Chrome Plated I don't know that for sure

The first dash may have been a '67/'68 Camaro , the second one is '73-'87 GM truck . There were header gaskets for both small and big block Chevy engines . '63 and newer 230 ci sixes had forged crankshafts in them .

you just got yourself a new subscriber, i'd love to go through all that stuff, saw a really cool snap on sign hanging on the wall up top. also check that random speaker, if it's a realistic mach one or two they sell for a 100 or so for parts even a single

@betweenthesharksgarage

2 ай бұрын

thank man... it is pretty neat stuff- a lot left to go though and i gotta get some light in there. I'll check on the speaker for sure

That extra cab Nisan is looking like a good builder!

@gregpace4676

2 ай бұрын

If it was a toyota maybe

@1985eldorado

2 ай бұрын

Chevy* ​@@gregpace4676

It's a old bead breaker. You got all the stuff you need to do your tires!

I don't even know you but I'm excited for you. So many possibilities.

@betweenthesharksgarage

2 ай бұрын

i appreciate that... i have no idea why i am excited about it myself ...but i am

That's a early to mid 80's nice'en/ Dotson. Please get it running i love these trucks and with that bumper and 8274 winch it is totally awesome!!

Neat exploration, the first rim you saw is a GM Rally wheel. The winch on the 85+ Nissan "Not a hard Body" 4X4 king cab is a Warn Winch, the rims are 6 lug. Be careful wandering around under those roof panels in the back shop. Good luck!!!

@Hoaxer51

2 ай бұрын

Looks like a 14” Rally wheel, Camaro’s use 14”, Corvettes used 15”. Those Rally wheels always looked good. Edit: There’s another Rally wheel in front of those shelves, I wonder if there are any more?

Those wheels look like Vectors like on the General Lee from the Dukes of Hazzard.

@betweenthesharksgarage

2 ай бұрын

they do acually, i need to dig in and see if they have any marks that would say they are American racing

@tommynoel9929

2 ай бұрын

Definitely vector wheels. $$$

@MitchJohnson-uu5uf

2 ай бұрын

Close but not quite, general lee had 10 spoke and black paint between them.

@Spennyman10

2 ай бұрын

@@MitchJohnson-uu5uf The ones in the video have 10 spokes @17:35 and could easily be painted black in between. On a side note these are 15 inch and most of the ones from the show were 14 inch.

@MitchJohnson-uu5uf

Ай бұрын

@@Spennyman10 yup looked right passed those only saw the other ones

We still run a Mallory Dual Point in the river jet boat. If you look it up the gm 230 made a few more horse power then the 250 but I havent had one 30 years so I dont recall the numbers.

@betweenthesharksgarage

2 ай бұрын

thats interesting i have never heard that

Take big bites and keep chewing, awesome stuff to see. congratulations on the property and the leftover gold.

@betweenthesharksgarage

Ай бұрын

Solid advice thanks man

That one set of instruments is corvette ('68-'72) the other looked to be out of a square body chevy ('73-later) not bad , once you find what's good it will make a nice workshop.

@rodss67

2 ай бұрын

Those look like 67-68 Camaro gauges.

That shop is awesome lots of potential buddy

@betweenthesharksgarage

2 ай бұрын

I think so too!

What a great find!

@betweenthesharksgarage

2 ай бұрын

thanks man

The trucks a Datsun 720 🤘🏻 a beast too, nice job on the purchase

@betweenthesharksgarage

Ай бұрын

Thanks 👍

The gauge cluster at 17:00 appears to be a first gen Camaro worth some money 👍 good find

Along for the ride man 👍

@betweenthesharksgarage

2 ай бұрын

Thanks man

That truck looks like it could be an '80s 720 King Cab or something. Overall, th' place got potential. Plenty room an' stuff.

@betweenthesharksgarage

2 ай бұрын

she'll turn into somethin

Tire balancer is a gem How much you save balancing own tires. As 18.00 to 22.00.per tire at shops.

@betweenthesharksgarage

Ай бұрын

we will get into it... i hope it works...i am pretty excited to have it

Power company might run new lines to there, but needs to be cleaned up probably and might have to pay some. Would be nice to have though.

The wheels are aftermarket real common on trucks and dressed up vans of the 70 and early 80. The guage cluster looks like a first gen Camaro or Corvette.

Just subscribed, looking forward to seeing you turn this pigs ear into a silk purse. lol 😊

@betweenthesharksgarage

2 ай бұрын

Thanks man it should be fun

Love the truck

@betweenthesharksgarage

Ай бұрын

It’s pretty cool. I look forward to seeing it it will run

That truck could be bad ass some of them had the 8 spark plugs 4 bangers in them wicked little engines

Datsun Model 720 King Cab -Nice truck. I had 1 with a diesel engine(SD22)

@betweenthesharksgarage

Ай бұрын

Right on. I have not even looked the hood. It’s like a gift to myself when I get something done

Those turbines look like 80’s Buick Regal T Type wheels. The 6 lug chrome are 99 up Chevy GMC

I would love to snag up a property like this. Happy for ya brother.

@betweenthesharksgarage

2 ай бұрын

thanks man, right place right time basically... hope you find one soon

The booke shead container. Corvette dach . Stearing column, hedder wheels and rings. Chevelle malibu dash bumper

Congratulations mate, it looks great with all the trees. Plenty of space for the new shark tank, with a couple of hoists. What are your plans for the place?

@betweenthesharksgarage

2 ай бұрын

thanks man... plan? whats that? lol gonna see if we can save the house and then go from there

That PL720 truck is worth some cash, not much, but a bit.

always fun to go through a new place. but this one might be due for a few runs to the dump and the metal recyclers.

@betweenthesharksgarage

2 ай бұрын

you are not kiddin

The winch on the Nissan and the cyclone wheels are your best fined

Are you in Florida? I feel like I saw this one while I was house shopping before🤔

This was interesting. Lots of scrap metal there.

@betweenthesharksgarage

2 ай бұрын

many many scrap metals

I like that flag in the window and a lot of parts you got in. It’s pretty cool.

@betweenthesharksgarage

2 ай бұрын

Thanks ma

Driveshaft loop, cool stuff in there!!

@betweenthesharksgarage

2 ай бұрын

i didn t even clock that

Those are vectors those were made back in 78 if I recall Corvettes aftermarket

Cool man, I’d love to find a little property like that close to me! The tire machines and cabinets are a nice score plus a bunch of fun junk! Those old Datsun/Nissan’s were good trucks so you got some potential there. To get those lower rollers back on track just remove them from the garage door and put them in the tracks before reattaching them to the door. What’s the plan for the house, demo or complete renovation?

@betweenthesharksgarage

2 ай бұрын

yea man, its less than a mile from my house, so when it came up I had to try for it and it worked out. thats smart about the garage door... i ll do that. I have never owned a "real one". for the house gonna try to go the reno route. If i demo then where i am I would not be able to build any of it myself. by "repairing" i can kinda get away with it or play a little dumb. its really rough... but... so is everything i start on

Looks like you're up for the challenge. Lots of good junk to check out. After a big cleanup & sort-out I'm sure you'll find some gold. Be watching the progress. Billy J... Queensland, Australia.

@betweenthesharksgarage

2 ай бұрын

Thanks man. I think you nailed it

the Datsun looks like an 80 to 83 cool little truck but they should be all manual like manual fuel pump manual choke and manual trans now what id look for on it would be if it had a weber carb thats a nice after market find if it has a Hitachi its a factory carb there also pretty nice for having a divorced transfer case the lug pattern is 6 lug chevy just like the older Toyotas if the old man did any engine way in it id love to see it these only came with a 2.2 or 2.4 inline 4

Hey feller you got a small fortune in parts in those buildings if you sell the parts youll recover a fair amount of your purchase cost

That set of wheels that you called turbines are actually from a company called Vector. Those are the same rims that were used on the Dukes of Hazzard chargers and some Buick T Types and Grand Nationals. They’re worth a bit of coin.

@betweenthesharksgarage

2 ай бұрын

thanks man good to know

@bobbrinkerhoff3592

2 ай бұрын

Nope , they're not . They are American Racing wheels, the style was called Vector .

@SladeM.

2 ай бұрын

@@bobbrinkerhoff3592 thats what I meant

New sub so I don't know where you are located or how much space you have currently but I would grab anything easily stolen and put them in your shop, such as the distributors, gauge clusters, carbs, headers, valve covers, etc.

@betweenthesharksgarage

2 ай бұрын

thanks for subscribing! not bad advice, this place was picked over once recently by the former owner and ransacked some time before that is all still left somehow

Honestly, that place is a goldmine. Alot of that little stuff is getting really hard to find. Definitely take your time picking through stuff. Especially in that back shed that the roof fell in on. There's money all over that place.

@betweenthesharksgarage

2 ай бұрын

I am looking forwared to diggin in and cleaning out. I ll get some power over there and i will make a new video

@johnw55018

2 ай бұрын

@@betweenthesharksgarage if theres room, you might consider getting a shipping container to put a bunch of stuff in, that way you can clear the garage and that back shed out in a hurry. Then you can get the garage repaired and usable asap. After that you can pick through all the stuff you moved into the shipping container. That way you'll have a blank slate of sorts in the garage for a fresh start on setting it up and organizing things. A video or videos, on the old house would be cool too!😁

First set guage early camaro..67 , 68 second set later maybe 70 71.. DUAL POINT DISTRIBUTOR TERRIFIC FIND

@betweenthesharksgarage

2 ай бұрын

thanks for the info on the gauges, i was way off

where are you located and how much for the winch

That Datsun you need to sell to Puddins Fab Shop!! 🤩

@betweenthesharksgarage

2 ай бұрын

Let him know it’s there

Two things you might have missed is you have two engine stands in there, one that has the six banger on it and one without an engine on it, can't have enough engine stands.

@betweenthesharksgarage

2 ай бұрын

thats a good point, i have an engine at my current shop that i keep tripping over and didn't eben think of it

How much for the 80s Nissan pl720 extended cab?

The Datsun 720 is a 80-84 with the bed, 85 was the last year but had different bed. 86 was the first year of the d21 hardbody

@betweenthesharksgarage

2 ай бұрын

thanks for the info

How much for the Datsun as is im interested.

That winch on the truck is worth some cash

Good day, Loving the content. The Nissan Bakkie would really come in handy though. If you gonna donate it please send it to me here in South Africa , papers and all. looks like a great project for my twin boys and myself.

The rims in the stack look like late 70s to 80s dodge or Chrysler factory wheels. Could be wrong, though.

Hey would like to know what happens to the truck in the front and if you’re not doing anything with it how much??

@betweenthesharksgarage

Ай бұрын

we ll see if we can get her running

Awesome dude

@betweenthesharksgarage

2 ай бұрын

thanks man

You've already got a separate power drop back there. Looks like a good spot for a rental property.

@betweenthesharksgarage

2 ай бұрын

thats good thinkin.... we are on the same page

damn that looks like a 8274 winch on front of that truck !

@betweenthesharksgarage

Ай бұрын

It might just be ….

That Nissan with that old school warn winch is worth a pretty penny !! Cash in hand if you wanna sell

@betweenthesharksgarage

2 ай бұрын

copy that will let you know

Nice DDSpeedShop callout! Dan's a local hero, had the pleasure of hanging out with him a few times. I think you've got the beginnings of a super rad, hot rod garage right there. The tire machines alone will probably pay for themselves before long, and there's probably a decent amount of scrap metal in the mowers, maybe even more money to the right guy.

@betweenthesharksgarage

2 ай бұрын

thats cool to hear dan is a good dude... i like his channel a lot

You need to go through that place and keep all those parts

@betweenthesharksgarage

2 ай бұрын

and at least get the ones i dont need to folks that do

Howdy, I have the same balancing machine in my workshop. Feel free to ask if you want to know how to use it. This thing is a little gem.

@betweenthesharksgarage

Ай бұрын

good to know, havent used a balancer in 20 years and never this model , so i am gonna need the help

Datsun or Nissan 720 "Hard Body" truck is what your new shop truck looks to be. They have 6 lug wheels IIRC. Rust kills them up here, but they were decent little trucks. Man, you have bitten off a huge chunk work! That land should work to your advantage, though. Maybe the house will come together better than it's appearance indicates. Should the local government be cooperative, a much bigger shop could eventually be built. You're young with a very good work ethic. This is going to work well. I think your neighbor might be hunting deer or fowl out of season, though.

@betweenthesharksgarage

2 ай бұрын

I know nothing about those trucks mechanically, i think they are neat... i I have watched enough of puddin's fab shop to know they have motors.... thats about the extent of it ....but it should be fun to tinker with

Few lawnmowers there, fun lil project to use around the property

@M.TTT.

2 ай бұрын

The datsun is awesome though

Great score, congrats on your purchase of the property.

@betweenthesharksgarage

2 ай бұрын

Thank you!

I will tell you what you bought.... You bought yourself a big job lol Seriously you got a good score. The turbine Wheels would look pretty good on your van if they are the right bolt pattern. As for the other wheels and car parts one thing I've learned over the years is everything will sell even if it's not for a lot of money it's still money back in your pocket. As for the little 1984ish Datsun 4x4 those aren't exactly my cup of tea but they are a great little truck that gets good gas milage and the market at least here in California is going up for vintage mini trucks from this era (as crazy as for me to think about it the truck is 40ish years old. Are you planning to eventually move on to the property? Oris it going to be a turn and burn after some cleaning? Regardless you definitely have content even if it is time lapse videos of you cleaning the place up, it will all help grow the channel.

@betweenthesharksgarage

2 ай бұрын

big job indeed. the truck is rough... but... maybe we can save it. got to at least try right? As far as the property...i am gonna fix it up, repair the house, make it nice then make a decision. I don't like flipping anything, not really my style...never felt good about a quick buck

@AtomicReverend

2 ай бұрын

@@betweenthesharksgarage it's not a quick buck, think of it as you're getting reimbursed for your labor or your smarts.

The American way! Overextended! 😂 Congrats to you I'm being a real estate Mogul! Looks like you'll have no shortage of content now. 😆 Keep the videos coming. Find a local scrapper in your neighborhood to come help you.

@betweenthesharksgarage

2 ай бұрын

dude, i am gonna make the local scrappers day

The gauge cluster in the shed with the police lights look like the gauge cluster from a 67 or 68 Camaro

@betweenthesharksgarage

2 ай бұрын

that seems to be the consensus... with a few folks saying corvette. thanks man

I have the same Datsun. Most reliable, unstoppable 4x4 I’ve ever driven. Throw a battery in her, Clean the carb. It’ll fire

@betweenthesharksgarage

2 ай бұрын

man i hope its that easy, it is cool

Hey I'm in need of a riding lawn mower. Would I be able to get one even if it's not running?

@betweenthesharksgarage

2 ай бұрын

man if you were local we could talk buisness

Puddin’s Fab Shop would be all over that Datsun

Those wheels could be really valuable, corvette I believe.

@betweenthesharksgarage

5 күн бұрын

I need to take a closer look. I know the guy had corvettes.

It is a Datsun King Cab. pre 1979. I owned 2 of them The Hard Body begain in 1980 models.

@thomascurtis2955

Ай бұрын

Hard bodys didnt start till late 85 early 86 ive owned over 8 720s 2 of them diesels this one is either 80 -82 maybe early 83 tail lights on bed switch in 83 and go to smooth bed side late 83 early 84

Power99 sticker on the shelf, gotta be in Georgia

@betweenthesharksgarage

Ай бұрын

yea buddy

This place looks cool

@betweenthesharksgarage

Ай бұрын

thanks man

Cool

That datsun 720 pickup isnt worth much but has potential

The manal tire changer is worth having

67 68 rear camaro bumper and gauge cluster in the shed

I would just get a leaf blower and a power washer and make that place nice in a day start at the roof and work my way down😂✌️

Same tire machine I use. Hard to find. All kinds of good stuff.

@betweenthesharksgarage

2 ай бұрын

thanks man... i may have to reach out to you to figure out how to use it...or maybe make a how to for us novices lol

@Ruststored

2 ай бұрын

@@betweenthesharksgarage Look for the threaded cone that holds the wheel down. LOL the DD speed shop reference.

Those Datsun trucks can be worth a good amount of money if they look good enough

@betweenthesharksgarage

Ай бұрын

This one does not meet the criteria

The turbine wheels are Mopars for chargers and challengers

18:04 Ford or Chrysler depending on the year of manufactured production.

How much for the slippery when wet sign on the old shop wall

@betweenthesharksgarage

2 ай бұрын

I don’t part with Bon Jovi stuff lol

The Datsun ute is a 720 Ute.

What's up with that truck at the shop