I Bought 13 BROKEN DJI Drones - But Can I Fix Them?!
Тәжірибелік нұсқаулар және стиль
BW-100 ECC 16 oz x 1 Pack (paid link): geni.us/ESMQ9vt
BW-100 ECC 8 oz x 1 Pack (paid link): geni.us/lDsw
I Bought 13 BROKEN DJI Drones - But Can I Fix Them?! I'm trying to fix several different models of drones: Mavic Mini, Mini SE, Mini 2, Mavic Air 2, and DJI FPV. I've done very little work on drones before so hopefully I can get them apart, diagnosed, and repaired without too much trouble.
►Tools & Parts I Use (paid link): www.amazon.com/shop/tronicsfix
►TronicsFix Game Console Repair Forum: www.tronicsfixforum.com/
🎵 Like the Music? I use Epidemic Sound (paid link): share.epidemicsound.com/tronic...
SUBSCRIBE: / @tronicsfix
-----------------------------------------------------------------------------------------------------------
Instagram / tronicsfix
Facebook / tronicsfix
Twitter / tronicsfix
Website www.tronicsfix.com/
-----------------------------------------------------------------------------------------------------------
Tools I Use:
-Protech Toolkit: Amazon (paid link) geni.us/90il5y
-Torx Security T8: Amazon (paid link) geni.us/AEcBvZL
-PH00 Phillips: Amazon (paid link) geni.us/YGVSSv
-Tweezer Set: Amazon (paid link) geni.us/t0VrlcX
-Electric Screwdriver: Amazon (paid link) geni.us/2wbHzJ
-Thermal Paste: Amazon (paid link) geni.us/q2Prd
-Canned Air: Amazon (paid link) geni.us/CPYy
Equipment Used:
-Hakko Hot Air Station: Amazon (paid link) geni.us/y2JDR
-Nozzle for hot air station: Amazon (paid link) geni.us/zpEWlT
-Hakko Soldering Station: Amazon (paid link) geni.us/MTL0qb
-Hakko Air Filter: Amazon (paid link) geni.us/Gqznh
-Digital Microscope: Amazon (paid link) geni.us/fAw8d4Q
-Stereo Microscope: Amazon (paid link) geni.us/WBO3b
-Kester Solder: Amazon (paid link) geni.us/ETXUh
→Business Inquiries Email: steve@tronicsfix.com
TronicsFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this KZread channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TronicsFix does not make any claims of the safety of the projects, techniques, or resources listed on this channel and will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not TronicsFix. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
(*We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.)
Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”
The music used in this video does not require attribution.
Пікірлер: 185
Part 2 IS UP! kzread.info/dash/bejne/kYWOusOfZta_Ybw.html
Yes! Do more things like drones and stuff. Metal detectors, electric scooters. 1 wheels!!! This stuff is all expensive and should be easy for you. You are a pro at this stuff which help me fix my stuff 😂
@Tronicsfix
Жыл бұрын
I try to do some stuff outside of game consoles but many times those videos don't get viewed as much so I don't do them very often. I'll still do some periodically though.
cant wait till part 2 this has been so interesting to see just how fixable drones are thanks Steve !!
@Tronicsfix
Жыл бұрын
Thanks! So glad you enjoyed this one.
Unfortunately you can't swap gimbals, motherboard and GPS/IMU unit within drones. It's all paired with SN together. You only can swapp arms, 3 in 1 cable (flex in mini series that goes to Gimbal, GPS/IMU, compass and MB) video cable in gimbal and ESC board. If you are changing arms put it in the middle (fiddle between open and unopened state and make it stay there by itself) and push mechanism by pin from the other side. Same story with Air 2 drone. In DJI FPV it's whole another story, there you can fiddle around with them more. If you want them to be repaired the best thing is to send them to DJI. It's cheap and fast, and they have tools to do SN change on the paired parts I was repairing DJI drones for about 1y but DJI went with SN paired route and for now it's not worth it. On the internet there were a community app for paring and calibration of gimbals, but i don't know if it's working anymore.
Always a pleasure when TronicsFix posts a longer video!
It's great to see this channel broadening the scope of things fixed. Thank-you!
I didn't know I wanted this video, but now part 2 is ALL I WANT
Great job on the fixes! I’ve done a few DJI’s as well, very satisfying! Absolutely need to connect these to a controller and the DJI Fly app to fully test though. That’s usually my first step, since the drone can be fixed 100% but still not fly if it has been registered or “bound” to a DJI account, bricking it. Little use in fixing a drone that can’t fly. This is checked by going back to the main screen > profile > device management. The only way a bound DJI drone flies is if it uses the same linked controller that was used when initially bound. No way to link the bound drone to another controller. The other reason for connecting to a controller/app is that the drone will self-diagnose errors making the list of needed repairs more clear.
@Tronicsfix
Жыл бұрын
Interesting. Thanks for the info!
Cool to see new stuff taken apart and repaired.
Stripped plastic screw holes can be repaired with a little super glue or epoxy to fill out the hole. Then, you can screw the screws into that
Don't worry Steve, not too worried about you not putting the right amount of thermal paste!
@afortyoz2freedom
Жыл бұрын
I'm a little disappointed but I guess I can forgive him. I just hope he doesn't let it happen again.
That was a fun watch. Looking forward to part 2
@Tronicsfix
Жыл бұрын
So glad you enjoyed!
I need to get myself a drone. Been wanting one for years. Nice video. Looking forward to part 2.
@Tronicsfix
Жыл бұрын
They're pretty fun!
@dukeofdevon5608
Жыл бұрын
Should get one they are such good fun
Thanks for this one, Steve. Been working on my busted drone for a bit and this gave me the extra boost I needed to finally get it fixed.
I'm only 12 minutes in, but I'm really impressed so far with how repairable these are (so far).
Oh man I loved it... can't wait for the part 2... You are such an inspiration... ❤
I like the batman theme transitions
Of any channel I’ve watched on KZread, I’d say this one is probably the best all-around. The premise is basically, YOU can fix whatever you want. It’s informative, it’s instructive and the creator is self taught and extremely persistent. The editing is top notch as well. It’s just a tremendous channel. Can’t say it enough.
Great content you always keep us interested in your videos. I look forward to seeing your next videos. Again congratulations 🎉🎉 to you fixing the Drone's to keep them out of the Landfills.
this is awesome, having own a few drones and breaking them, its nice to see somone else attempt to fix it to learn it for yourself
Very intereseting, I really enjoyed watching this kind of repair. Thank you so much.
Interesting fixes. That epoxy holding the wires can be removed a lot easier with some heat... use your heat tool to soften it up and it'll come right off. Those grey cables are U.FL (UMCC).
Let's get some popcorn 🍿
Yes I was hoping for a part 2! Lovely
Great video!! Looking forward to part 2.
Amazing what you did fixed those... You seem knowledge all kind electronics device and those .. that's amazing what you did... thank for sharing. It's enjoy watch what you taught us to watch and learned... that's awesome... :)
Waiting on part 2!! A friend sent me 2 drones like those. I dabble in electronics fixing, the drones I have had a issue with the sensors, I cleaned the drones with good ol alcohol. As for the thermal paste, I had a dead Xbox one x so I used the blue paste on it. Did the trick. So far it flies fine!
Thanks for this video Steve, I am waiting for the part two! This is the kind of video that worth the likes for part two 🎉😂❤
With the release of the new mini 3, its great to see old ones getting fixed
Thanks for the awesome video! You are inspiring me to repair more and more.
@Tronicsfix
Жыл бұрын
Thanks! Great to hear that!
Good job!! Waiting on part 2
Fun one! Looking forward for part 2
Obvious solution in 5, 4, 3.. had my rolling. Awesome as always!
Can’t wait for part 2!
32:50 Bro tried to land on water 💀
Tronics!! That error went away when you replaced the gps sensor! You just noticed it after installing the gimbal😂
I just got what I'm calling my first "real" drone a few weeks ago (DJI Mini 3 Pro), and I've already had to replace one of the hinge/shaft assemblies on a front arm - I know they're an intentional failure point (instead of the frame or arms themselves), but it's still ~$18 to source. Amazing what a drop from 2 feet into grass will do. :)
Good vidéo, part 2 please with test outside😊🙏
Hi bro I really like your videos I've been a fan for so long i hope you post part two asap ❤️❤️
Very interesting. Can't wait part 2. Cheers from over the pond ;-) (Belgium)
I fixed my mini se with a replacement left arm, was very easy got it back flying again 👍
I recently tried my luck with 2 parts of repair Xbox elite controllers for on eBay and surprisingly both of them were flawless condition and had no problems
Been waiting for a video about drones long time
when I saw the topic, I stopped everything I was doing to watch! Had to... it was a must... great fix-it video!
Wow interesting will wait for part 2
lol i keep comin back to check for part 2. addicted.
Keep up the great videos!!
This was excellent!
I love how much money he spends just to make us happy. Love your vids, and keep up the good work.👍❤
@RS_Redbaron
Жыл бұрын
Not only us hahahha
funny i just started looking for a dji drone today, and you upload a great repair video... :D
@Tronicsfix
Жыл бұрын
They're some of the best out there, imo
"I don't have this blue stuff." Time to add to the shopping list!
@Tronicsfix
Жыл бұрын
Lol, yep!
yess finaly the drones. i was waiting for this video
@Tronicsfix
Жыл бұрын
Hope you like it!
@hawwin
Жыл бұрын
@@Tronicsfix thanks
"I don't have much experience with drones let's start with the most difficult" 😂😂 I love the confidence
Love your channel watch it every Time
@Tronicsfix
Жыл бұрын
I appreciate the support!
Wanted to see you fly the fixed ones
Wow! Great video!!
Steve Can you do also a fly test,? i want too see that.👍 Good Job fix the drones.😉
Interesting! I can't help but wonder if the gimbal and thereby cameras are somehow connected to the down facing sensors, possibly through the same video processing??
Hey TronicsFix, great videos. How do you make your flux soft enough to fill your syringes?
I have no problem with you making a part two of this.
Part two please ❤
Has to be very common to have liquid damage on drones. People likely crash them all the time in ponds, lakes, ocean areas trying to take footage.
Eager for part 2
Transition in 10:35 is flawless.
Super nice video and something new. I would like to see a video just with the water damaged one. Who know what can be saved. I am a person who try and try and want to give a chance to the most damaged ones.
You can try recalibrating the sensors - you can only do that using a PC connection through the DJI Assistant 2 suite…….
Drone tech here The fixes are easier then you think!!
@Tronicsfix
Жыл бұрын
That sounds like an awesome job! I bet these fixes are super easy for you. After my first repair of each drone it got much easier.
@jeffreycarbonneau9732
Жыл бұрын
@@Tronicsfix I saw that,you seemed to get the hang of it pretty quickly! For bottom sensor issues,it's usually the 3-1 flat cable,or the PTZ camera cable
Great Video Steve
@Tronicsfix
Жыл бұрын
Thanks! Glad you enjoyed.
This was fun and different!
@Tronicsfix
Жыл бұрын
So glad you enjoyed!
U should do some laptop next
@Tronicsfix
Жыл бұрын
I've got more laptop videos coming
edits are crazy and unexpected
Awesome work😎😎😎
5:51 "Here's what we do to warranty stickers around here" - There's a tshirt.
I have mini drone. Works great. Nice repairs 👍
@Tronicsfix
Жыл бұрын
The mini's are cool. So light. A little more difficult to open up but not bad once you get the hang of it.
Fantastic content really interesting
some real Drone of Theseus action going on here
Hello, where is part 2 I’ve been waiting for half a day.
Part 2 pls. i've a mavik pro 1 with a gimbal problem. it going stuck when move
Perfect amount of thermal paste is THE reason I watch your videos. I know I can find thousands of ppl who agree with me, but i can't prove it 😇
Amazing video Steve, great work. How would you rate the repairability of these mavic drones? Shame about the gimble, I've had easy fixes on cars before that i started off with the most complex instead of trying the most obvious lol. Live and learn.
@Tronicsfix
Жыл бұрын
They're actually not too bad to repair once you've done a few of them.
@bluej511
Жыл бұрын
@@Tronicsfix Yea doesn't look too bad, surprised and also glad they're not glued together for water proofing but then you'd never repair em without breaking em.
I love your videos Love from Iraq
We want part 2 !!!!!!
Is there any difference in the thermal paste by its color ?
Hey bud l had the same problem with a mavric pro drone l had to plug the drone into the computer and do calibration itcworked for me
As well Steve thank you for the PS4 ebay 👍
Seems like these would be great candidates for conformal coat. Or are these disposables?
Bro I was going to just comment to say fix some drones dang 😂
@Tronicsfix
Жыл бұрын
Well, here you go!
Can you give an update on the roombas that you tried to repair
Answer for a question from last video: Do you use hands for removing ribbon or 'lego' connectors: Yes I do I have giant hands 21 cm long and 11 cm wide It is pretty useful to use hands because I am an Indian and we are not professionals :)
With the repair around 4:20 wouldn't it be simpler to clip the wires and splice them?
Hi . Sory ask this question here . My ps5 when turn on , 3 beeps quickly and fast .is it hardware problem؟؟؟؟thank for help to me🙏
Drone repair is very rewarding. Great that you did a video on it, looking forward to part 2, thanks for all the repair videos!
I epoxied my dji spark's broken engine mount and i'm flying it for a year and it works fije
Gah! Video cuts off right when you got to the drone I have. Oh well, as always I look forward to your next video!
@Tronicsfix
Жыл бұрын
Part 2 is coming!
You can fix broken drone arms in a pinch with super glue and baking soda. It's a light weight, strong, fast curing bond. The way its applied matters though, so make sure to practice before doing it on something you care about.
@joelp7775
Жыл бұрын
Replacing the arm is a better long term fix, but if you don't want to stop flying, this trick will help keep you in the air!
Are you gonna do a job lot video on any console
Wonder if buying one like this would be better than buying a new one, as I’ve been in the market and just can’t get myself to buy one of the new mavic minis as they are pricey
I'm going to have to send you some blue thermal paste LOL
Where do you sell the gadgets you'd have repaired,??
Its not obvious Steve 😅 i made the same mistake when i first got my drone