i would love a series on this where you keep on adding features to him!

@V-Block.

6 ай бұрын

Like the puzzle coffee table but with a computer?

@ayandabose

6 ай бұрын

Yes absolutly!

@burntalive

6 ай бұрын

It would be cool if the speaker was embedded into the head itself so it sounds like it's coming from the life sized figurine

@kst968

6 ай бұрын

thats a great idea

@EpicRoblos

6 ай бұрын

Yes

You should put a security camera in the front because that thing is DEFINITELY going to catch people off guard and scare the shit out of them

@UnnecessaryInventions

6 ай бұрын

Hahaha could be a good idea!

@Hyper_leopard

6 ай бұрын

You’d be able to tell who watches you videos and who doesn’t by the people who get surprised

@Mardigrasman23

6 ай бұрын

Definitely unnecessarily unnecessary

@sailorbrite

6 ай бұрын

@@Hyper_leopardnah, we had a life size cardboard cutout of Obama in the office for like two months and it was still startling regulars badly enough to make them scream 😂 it happened to me twice 😅

@purplepenguinproductions2552

6 ай бұрын

​@@UnnecessaryInventions Hi I am not good at reading the autocorrect in my phone really help with this I would like to see you 3D print a and where it need metal in it just put a piece of wire and a metal thing in it I really would like to see a spark plug for your printed

and now thats what you call unnecessary

@Hyperchaoticcybernightmare.

6 ай бұрын

35 minutes to an hour gang

@Hyperchaoticcybernightmare.

6 ай бұрын

Claiming my spot before this blows up

@aidinniplays

6 ай бұрын

Me too

@braydenschmidt7211

6 ай бұрын

Another thing that is unnecessary: Using GPT 4 when I tested it with GPT 3.5 and I got something, I can’t test it because I don’t have a Raspberry Pi board, but here is what I got from Using 3.5 import RPi.GPIO as GPIO import time import os # Set up GPIO GPIO.setwarnings(False) GPIO.setmode(GPIO.BOARD) motion_sensor_pin = 11 GPIO.setup(motion_sensor_pin, GPIO.IN) # Set up audio file audio_file_path = "/path/to/your/audio/file.mp3" try: while True: if GPIO.input(motion_sensor_pin): print("Motion detected! Playing audio...") os.system("mpg321 " + audio_file_path) # Use mpg321 for mp3 files time.sleep(2) # Adjust as needed to prevent repeated playback during motion except KeyboardInterrupt: print("Exiting...") GPIO.cleanup() Make sure to replace motion_sensor_pin and audio_file_path with the appropriate values for your setup. Also, install the required packages using sudo apt-get install mpg321 for playing mp3 files.

@rossmennie4903

6 ай бұрын

I find the process interesting. It doesn’t matter how “ 13:21 😢unnecessary”.

My god the utility of ChatGPT is absolutely terrifying

This is awesome! love the design

@Scottishkid4475

3 ай бұрын

I think 3d printed won

@AVFL173

3 ай бұрын

oh, hey, i dare you to make 3d printed joe vs real joe

Damn that looks amazing! If I had 1 piece of constructive criticism though would be to either swap the black color to another body part or use a different color other than black, you cant really see the infamous mustache and thats the best part! Either way you're extremely talented, as always.

@rafi-leigh

6 ай бұрын

lol

@Affinity3DStudios

2 ай бұрын

Or he could just paint the mustache a different color. No need to run another print.

Watching you giggle when the sensor started working actually made my smile. Thank you! It always looks like you're having so much fun working on projects.

This guy really knows how to build himself up…

Reality: he lives in there alone, Nobody visits him ao often.

@rubeno1838

6 ай бұрын

Yeah, but that makes it even more unnecessary… Mission accomplished

Quick ideas: 1. Eyes-cameras (obviously use it as Ring devices to speak with somebody at your front door); 2. Eyes faceID which opens doors 3. Handshake-fingerprint scanner to open the door 4. Chest-postbox 5. Moving mustaches.

these prints are getting more and more intresting every day😂

You should probably add a sleep somewhere in that python code, so it doesn't go off EVERYTIME the sensor is triggered, but a great, unnecessary addition!

Great video Matty but FyI PrusaSlicer will allow you to split and add pegs to parts so they connect, it does it automatically.

Should probably also add a delay so it only plays the sound file once every minute or so, giving people enough time to get out of the area before it re-triggers.

@TRB_TheRedBrick

6 ай бұрын

Thats a necessary idea, Get it? 😂

@Nordorf

6 ай бұрын

Just because its called "unecessary inventions" doesn't mean everything in the entire place have to be unecessary.. "Get it"? @@TRB_TheRedBrick/videos

I just watch your video from 6 MONTHS AGO "I Created My Dream Product Design Studio" and saw that you had parts from this very project on the table! @4;47 that's crazy dude. you really were not lying when you said it took you a while to print all the parts out lol

I just discovered your channel and have been binge watching for a few days straight! I’m just curious, how much filament did you use in terms of weight and cost, how long did all parts take to print in totality? Looking at getting a good 3d printer for my first printer your channel has been fascinating and a very motivational :)

@Hyperchaoticcybernightmare.

6 ай бұрын

Here before it blows up

@pvic6959

6 ай бұрын

yeah ive watched a lot of this guy for a loooong while. i also watch a lot of other makers. the thing that bothers me the most is the plastic use. it seems so so so much. especially when they make huge prints just to test something and throwaway. feels really wasteful :(

@Resyektt

6 ай бұрын

@@pvic6959most of the time they’re using pla which is derived from corn

@mohistschool1003

6 ай бұрын

I recommend the QIDI Max3 3D printer, it is bigger than K1 Max, and better print quanlity

@DiamondLabs3

6 ай бұрын

get eather the ender 3 pro, ender 3 max neo, or cr10s v2

Cool build! How much filament did you end up using? How much does plastic Matty weigh compared to real Matty?

@ClickGamingRoblox1

6 ай бұрын

40,000 GRAMS

This is a top ten build of all time for him

hi, first of all, love your ideas and creation and the process how you make things in a very creative way and contents everytime, honestly you inspire me to do the same as you but more in touch with trying to make stuff like product designs that will interests for ppl to buy from , but i am in a bit of a predicament as i want to try doing so from now on, but i dont know like what company will be good to work from home or even how to be brave and make your own freelance company for ppl to order to as i have no confidence at all, especially with no prior experience at all, i do however have couples of ideas of my own so if anyone can help from this comunity, please do, im trying to up my game and make my dream realized as this youtube channel does, i love how it seems like life becomes more livelier and more fun to live in especially doing something you love

I noticed that his infill is very dense. It would probably use a lot less plastic at 5%

Love your videos! Keep up the entertainment! Live long and prosper 💪

I just love when you laugh it's so genuine it makes me laugh too😂

Wait but don’t you leave out of the same door? Or a different door? Looks like now you need to 3-D print another one at the exit or figure out how to make it say goodbye when you’re leaving

Looking forward to seeing more great content like this one 😊😊😊

One of your best videos and ideas!

Making life is an amazing thing a person could do

@Max6chen

6 ай бұрын

🤨🤨🤨🤨

If you had two motion sensors, you could detect if the person is coming or going.. so you could say `bubye for now` (or whatever)

You should Make a silicone head that you can slap if you are mad

Come back dude been 3 months I miss you😢

@patjackmanesq

3 ай бұрын

Hope he's okay

@kiwigaming09

3 ай бұрын

@@patjackmanesq check his shorts

Hey! This 3D printing concept is getting wild! Instead of the usual filament, what if we built objects layer-by-layer from the inside out? Imagine a spinning container where we spray a special resin or even tiny wires, one layer at a time, with a UV light to cure it all in place. We could even have a robotic arm pick and place small components inside as we build! This way, we could create objects with different materials on the inside and outside, or even sneaky compartments hidden within. It's like building a treasure chest layer by layer! This might be a simpler way to get started with this "inside-out 3D printing" idea. What do you think? Could this be a cool new way to make things?

Up next: adding a camera with face detection so it won't greet you since you probably already have heard your voice enough 😂 Tip: add it pointing towards the door to give it more computional time.

i wonder how much the filament needed to print this costs

After watching your shorts I became obsessed with your content

You should make a button that when you press it it says “That was unnecessary”

This guy always has a new 3d printer

That's awesome Matt!!! Can't wait to meet him in person!!!! 😁

Imagine you see this video after years where the print now take 5-10 mins instead of hours and days!

That’s 😂 funny and super creative! Security robot version of yourself!!!

Honestly, a great statue of yourself.

It is midnight here in my country! But sleep can wait when this channel uploads a new video 😍

we want more features to him!

I can imagine this thing just randomly saying hi late at night when you are working

Dude is litterally make everything,good job

Would it be more fun if you add actuators at shoulder joints so that this comes to live action😉

"the scaling was on point" - Am I the only one who noticed it was completly off!

0:42 I disagree. The “Coat rack with road cones” art piece in the corner is very interesting and eye catching

Love it!

the jump scare of that sensor on the model for everyone walking in!

Now you’ll know if there are ghosts coming into your studio😂😂

@UnnecessaryInventions

6 ай бұрын

Well that room is also on a motion activated light that is …always going off.

@willorobozex950

6 ай бұрын

oh... yeesh. Stay safe.

@Farleigh1050

6 ай бұрын

Hey there, welcome to the unnecessary studio

That printer is extraordinary. I don’t have one, but I’ve been following the technology,. Are the leg pieces hollow? Are you using away more material than you need to?

Bro made a ghost detector machine 😂

Hey Matty! Can you think of any more ways to recreate my favorite unnesecesy invention, which is the Sporty Susan?

Just love the fact that you are at 4.44M subs. That is a sign from the universe

can you compare build quality between the printers? does it vary?

So i really need an unnecessary inventions and Simone Giertz project. Anyone else?!

That repeated greeting will haunt me in my dreams😅

This guys the best

Oh God that will be so annoying!!! yet so f. cool!!! keep it up. I love it!

the wall thickness is huge on these prints haha

A necessary invention he should make is an AirPods pillow for when u sleep you can have it in your ear

@LorenzApe334

4 ай бұрын

Good Idea!!

Absolutely love it 😂

*Scrolls through the Privacy Policy* “ Yeah, I read all that.” 😂😂😂

The Dutch arm with the red, white, blue and orange is a really nice touch 👌🏻🤙🏻🇳🇱

Dude that's awesome. I don't know anything about 3d printing, 3d modeling & coding but I know that was a lot of work. It would have been awesome is it had the speaker within the mannequin and the sound came from within his mouth and also it would have been nice if it was wearing the Gator Grips.

I'd put money on that lasting a week before its unplugged or you've put a delay in on the sound playing. 🤣 Put Cameras in his eyes! you absolutely want to see peoples reactions, and when the inevitable ChatGPT upgrade takes place Mattybot will already have eyes

Hearing this in the middle of the night 💀

I just got a k1 max too it is so awesome

leaving the studio: HEY THERE, WELCOME TO THE UNNECESSARY STUDIO

What is your number one recommended 30 printer not for beginner because I’m not a beginner. I just want a new printer but I just want since you are more of a pro than me. What is your recommendation for an upgrade? 2:22

3D Printed Me vs Real Me

Can you make a full video of you doing the full process? I want to know all the boring details.

Now that was so unnecessary awesome! Maybe it's a great idea the put in some random other greeting lines in there

You need to make it animated

matty idk what kind of skill you have but jesus christ your mad crazy at crafting

3:48 i loved it how you just let that one foot sit on the floor and didn’t pick it up

Matty you should make an unnecessary Vr accessory

It’s mad scary if that thing goes off by itself

12:10 "Right here let's put him in the entrance" Even the giant sign that says EXIT

Just found your channel and it was an instant sub. But I need to know, what app are you using for chat GPT that (I assume) works with googles image recognition?

Ever thought about getting nylon printers like the formlabs ones?

How many 3d printers do you have? Love your work and your videos

9:47 bro turned into vsauce💀

I love your video and sorry I was late

How much Filament did that take!?

@UnnecessaryInventions

6 ай бұрын

The nice part is that I used a lot of 1/2 rolls I have had left sitting around in the studio. So it was mostly all old stuff!

You should design a pair of scissors to cut when making a video or cutting and pasting.

11:21 i thought bro was like 3’4” from that shot 😂

In total how long did the 3d printing take?

Is it just me or is the audio left side bias

Surely theres a way to make it say bye if it detects movement in the other direction

Next time a get a life size toy, I need this in my life

Matty is a evil genius

definitely add a sleep function at the end of that program to keep it from going off over and over.

can you please publish your creations or remixes yes i do understand that you will do more work but it will be very little and so many would love - a fellow 3d printing person

I feel like this is an actual proper and good use of ai to help with the coding and whether you were using the right part to sense the motion

@MicoDossun

5 ай бұрын

I don’t believe for a second he actually used that code

@UnnecessaryInventions first of all that is really cool and second maybe try make it have a security system where you tell him when you leave the studio and if someone gets in it's sends you a message

Can you make it so it also detects when people leave and says thanks for visiting the unnecessary inventions studio?

We have Matty at home😂

Make mini windshield wipers for glasses

Is that the new Creality printer

Unnecessary Inventions in 2045: I Cloned Myself