You look like a gordon freeman

@CamdenBowen

Жыл бұрын

My new favorite comment

@layZlad

Жыл бұрын

I cant unsee it now

@OreoKiller_

9 ай бұрын

​@@layZlad OH GOD ME TOO

@CWorm

9 ай бұрын

Nah.

@heksekvlt7161

9 ай бұрын

HELP ME GORDON

I have a feeling that Camden is building a completely 3D printed Gas powered car 😂

@breme818

Жыл бұрын

Would love to see that ngl

@bricknplay

Жыл бұрын

Car? This dude will build a whole truck with a I6 😂

@CamdenBowen

Жыл бұрын

As Johnny Cash once said, I'd get it one piece at a time

@theoverlord3839

Жыл бұрын

Cant wait to see the cvjoints and limited slip diff for it too

@CamdenBowen

Жыл бұрын

@@theoverlord3839 CV joints sound like a cool idea

Shifting without a clutch really grinds my gears

@DH-xw6jp

9 ай бұрын

[Polite golf clap]

@lyteyearz5810

2 ай бұрын

@@DH-xw6jp lmaooo

@delanorrosey4730

Ай бұрын

This is a low speed, low power transmission. An electric drill, although torquey, isn't unloading a couple hundred horsepower and foot-pounds into each gear.

I know this may sound a bit cheesy but i think its fair to say you have become my favourite youtube channel at this point. Love your projects, keep it up!

@CamdenBowen

Жыл бұрын

Thank you so much! I'm glad I can deliver good content for you to enjoy!

I might be a bit late, but one substitute for the plastic bushing could be a yo-yo bearing. They're about half the size to a quarter of the size of a skateboard bearing. Not entirely sure if they can withstand a good compression as all they do is hold the string of a yo-yo. But could be worth giving a try to reduce wear and having to replace the plastic bushing as often. Awesome video though!

@savagesock3598

9 ай бұрын

Never thought of that....

Great video as always! I love how your designs are not only well built but allow for a better understanding of the principles behind the mechanism. Keep up the awesome work!

@CamdenBowen

Жыл бұрын

Thanks alot! I'm glad I can help give a better understanding of how they work through my designs!

Keep it up bro. I swear 3D printing makes every mechanism 10x easier to understand. I hope you’ll get the gas engine to work, maybe you could put it in a RC Car or something 😂

@CamdenBowen

Жыл бұрын

Thank you! Glad I could help make sense of it!

@zackfryman4978

10 ай бұрын

I forgot about the bearing and had a long moment of confusion but know understand it I think lol

@zackfryman4978

10 ай бұрын

I went back and realized I skipped a large part and missed his explanation

This is fantastic stuff! Loving this continued project of literally building a drivetrain

respect on that seiko brother, that color dial is very nice!

dude i love your videos every time i come up with a idea you have all ready done it . i hope you luck :)

Your work is amazing! Too amazing... 🤨📸

I’ve been waiting for this video. Keep it up bro.

@CamdenBowen

Жыл бұрын

Thank you! It means alot

Still waiting on that 3d printed Lamborghini I commissioned

@Matthewbarnes23

Жыл бұрын

That would take a long time let em do what he wants planned for the channel first lol

Love the watch! The gearbox is pretty cool too.

@CamdenBowen

10 ай бұрын

Thanks! It's a seiko spirit sbtq045 if you're wondering

It is impressive. I was expecting your makeshift plastic on plastic bearings to melt together.

cool shifter and cool watch

Love this dude. You are a genius and good explaining. Normally it doesn't happen tougher. I would like to see more the part of design sketch and 3d modeling this parts. I know you skipped that to male it friendly for everyone but can be a separate video and we all can learn a lot from that too. Keep up the good work 🥰😍

@CamdenBowen

9 ай бұрын

Thank you!

Cool channel! Great engineering skills.

@CamdenBowen

Жыл бұрын

Thank you!

thanks for files , i printend one for me

Genial ! je modélise des boites de vitesse pour des crawler RC et j'ai un projet de vélo cargo , pour lesquels ton design semble être très pertinent ! j'ai très envie d'essayer de travailler dessus pour l'adapter à mes projets ! un grand merci pour ton partage !!!! :)

such a cool idea bro but would love to see a more in depth explanation of what's going on particularly with the gear selection system and gear ratios. otherwise brilliant video my guy!

@CamdenBowen

Жыл бұрын

Thanks! Next time I will focus more on explaining the design and theory (without rambling on too much)

I am not sure what filament material you are using, but i would suggest PETG as an alternative to PLA as it has a lower coefficient of friction to PLA and would help with keeping the tolerances tighter while keeping an easier slip fit for the clutches.

3d printed money shift is something we all want to see

Wonderful!!! Now make one with a clutch 😃

oh shit you got it all printed

Saw the thumbnail and was like: what is edward snowden up too with a gear box!? Oh. Wrong guy. You just look like a young snowden 😁😁

This would be perfect for custom rc cars

Never seen a 3d printed torque converter before! Looking forward to that 😁

@CamdenBowen

Жыл бұрын

It's a very intrepidous project (for 3d printing, at least). I'm glad you're as excited as I am!

you beat me to thee torque convertor, I would love to see how it works bc I want to make one for my rc car

Make a 2 cylider gas engine would be great to see If you like the idea

Incredible videos man. Any word on finishing the gas engine?

@CamdenBowen

Жыл бұрын

Thank you! I am not working on the engine now as I am far too busy to, I've decided to move towards bigger and better projects instead

Maybe redesign the dog gears to have a 45° incline before a positive 90° lockup between gears. Maybe the friction between the gear and dog gear will allow for a smoother transition instead of a higher torque shock when shifting between gears. Provided, such friction in motor vehicle transmissions would wear down the components much faster, but for a 3D printed model, it might make it smoother without requiring synchros. How'd you make the shift forks and how do they mesh with the shifter?

You should def make a transaxle

IT BLEW THE SHAFT

May I suggest duplicating the Constantinescu Torque Convertor?

you should make a clutch too and hook it up to a 3D printed engine!

There is an very old video on you tube from like the 50s explaining how manual transmissions work.

I wouldn't mind seeing this in a 3d printed car with the air power engine.

Any way you could test that transmission and torque converter on a three or six horsepower moter? Im sure the go kart community would be pleased.

Oh cool! you made a dogbox!

Now you should make an automatic to match your fluid coupler. However I don’t know how you could do that remotely easily

Bros been avoiding annual car inspections since 2000

Next video 3D printed differential

Let's go

Hey I stumbled upon your page and I would like to follow your footsteps and print some similar themed mechanical parts, I was wondering what filament you youse for your projects and if you have any tips or tricks?

@CamdenBowen

Жыл бұрын

I mainly use PETG for all my filaments, when you print parts that interact with another 3d printed part you generally want a tolerance of 0.5mm. If the part interacts with a machined part like a rod, you want 0.25mm of tolerance

@inabothwick6353

11 ай бұрын

@@CamdenBowen Thankyou so much!!!

CVTs are also use in tractors, but they do not use belts they rely on hydralic systems and they can handle 700hp easily, in tractors cvts are slowly becoming the standard

You are loading the transmission with centrifugal force from the flywheel. Would of been nice to see how much torque it could output before it started to break apart. The being that the break was at the drill the test only showed that the immediate torque from the drill which can be extreme broke your input shaft.

can we get the files by any chance i wanna try this

Bro made a Dog Box

Have you thought about making a sequential gearbox? Instead of a standard H, you would just have to bump the shifter forward to upshift or bump it backwards to downshift.

@CamdenBowen

Жыл бұрын

I'm thinking of combing the fluid coupler with a design like that to make a sort of semi automatic transmission, similar to the experience of using a tiptronic system in some cars

I've been looking into finding an affordable self lubricating filament to print bearings and piston rings with. I hear nylon is decent do you know of any?

@CamdenBowen

10 ай бұрын

I am actually not too sure, I know that hard filaments like PLA when sanded very smooth actually have very low friction in those cases without the need for lubrication as long as they are not under high stress

Not the neutral drop 😭😭😭

straight cut gears without straight cut gear noises! it'd be really funny to see you try to make a 3d printed straight cut dog box as annoyingly loud as possible

@CamdenBowen

9 ай бұрын

I love the gearbox whine that rally cars with straight cut gears produce, maybe I'll make a bigger one of these lol

cool! although, i would like to see an even beter version with a few more gears cmon' a 4th gear aint that hard to cram into the housing.

I am going tomake your gearbox,what size shaft and bearings did you use? and what are the gear ratios?

@CamdenBowen

8 ай бұрын

The rods are 8mm in diameter and the bearings are 608 skateboard bearings. For the gears, gear 1 is 2:1, gear 2 is 1.5:1 and gear 3 is 1:1. Hope this helps!

@jessedupreez

8 ай бұрын

@@CamdenBowen Thank you! I have finished 3d printing every thing, I just neet to get some 8mm bar(i got bearings and i am going to try some printed ones ) I plan on using your gearbox in a 3d printed rc car :)

6:47 that’s a torque converter isn’t it? Oh dear lord he’s gonna build a 4L60 lol.

The way it's supposed to go is engine flywheel clutch then transmission

I think you should make a whole model T or model A. You already have the engine and gearbox. Edit: I think a Ford thunderbird would be cool too, you could make a V8 with smaller cylinders

@CamdenBowen

Жыл бұрын

I like the idea of replicating an old car model, Not a bad idea to do a Ford Thunderbird or a Plymouth Valiant

great vid but you need to show more of how you modeld and printed the gearbox and gears to make the video seem more complete

@CamdenBowen

Жыл бұрын

Thank you! I will include more theory/design principals next time

@matthewfallon2288

Жыл бұрын

@@CamdenBowen no problem! never expected you to see my comment. have a nice day

What kind of metal rods are those? Or can they be 3d printed?

@CamdenBowen

Жыл бұрын

Just an 8mm steel rod. I suppose you could print them however it will work much smoother using a machined rod

Make a small, reliable air engine (one cylinder),small shifter gearbox and differential, put it all together and make a RC car around it.

@CamdenBowen

Жыл бұрын

Not a bad idea, it's one I've considered a few times

Will you be uploading stl files anywhere ?

@CamdenBowen

Жыл бұрын

I forgot to upload them and attach a link, I will do that when I get a chance. I should have them attached by or before tomorrow in the description

@DiabloProcentoPersonal.

Жыл бұрын

@@CamdenBowen Thank you :3

Stronger than most dodge truck transmissions

we all know a clutch is next

did i see a torqye converter at the end?

@CamdenBowen

Жыл бұрын

Something like that :)

you should put it on a pushbike

Lubrication? Grease!

@CamdenBowen

Жыл бұрын

Under greater loads defiantly, but for this test its okay :)

You put the flywheel on the wrong side of the gearbox with the air engine.

Now try making a manual transmisdion instead of a combination between sequential and manual

I would have uses herringbone gears

@CamdenBowen

Жыл бұрын

I could have, but for simplicities sake I avoided it

can you make it for a small go kart tho 🤔

@CamdenBowen

Жыл бұрын

Possibly from a stronger material like Aluminum at least

@benkappaa

Жыл бұрын

@@CamdenBowen probably yeah.

What about reverse

Someone give this man a metal printer

@CamdenBowen

Жыл бұрын

The things I'd do to have one...

make a cvt

what watch is that? on 5:02

@CamdenBowen

4 ай бұрын

It's a Seiko Spirit SBTQ045, I think they're only sold in japan but I got it from a seller on Ebay

@lazarman2000

4 ай бұрын

@@CamdenBowen thanks!!!

Definitely not complaining, but I'm just curious if the pulling of focus when transitioning to a new bench shot hurts anyone else's eyes?

@CamdenBowen

Жыл бұрын

Could you point out the timestamp to me?

@PowerScissor

Жыл бұрын

​@@CamdenBowen I can't put my finger on exactly what it is. I'm not familiar with all the photography / video terms. Something just had a weird feeling where focus and blur didn't feel natural or "usual" I suppose. Scrubbing through quickly since I'm at work, but @6:22 has that feeling...but it was several times where it just had an "off" feeling. Sorry I can't describe it better. It could just be me also. I feel weird watching some shows that are recorded in different framerates that others think look amazing. Great content. I'm more just curious if others got that feeling, or I'm the oddity.

@CamdenBowen

Жыл бұрын

@@PowerScissor Thank you! I wonder if it could be your brain tricking your eyes into thinking the objects are out of focus as if they were right in front of you and not on video? So your eyes try to grab focus on an object that is out of focus?

@PowerScissor

Жыл бұрын

​@@CamdenBowen Now that I'm home, I rewatched that section. I believe I naturally look at things from close to far...in that order. 1st thing, 2nd thing, 3rd, etc. and the focus pulls from back to front. Even when I know it's going to do that on the 6th watch, it still makes me feel weird. You're right in that my eyes will trying to focus on a part of the frame that is actually going farther out of focus.

Put it on the VTEC😂

Soooo You wouldn't download a Car!??? Moment

that way of engaging gears really sucks. a differential can be used to engage gears using breaks. so the gears dont grind but thats why the clutch is used. my idea would pretty much use a different break for each gear and no clutch needed. just got to find a way to organize all the differentials in some compact way to make the breaks on the outside so there easily replaceable.

Brass gears aren't that hard to cut with a triangle file!

why are your videos always so silent

this thing looks like an AI generated figurine.

Now add it yo your vtec engine

0:25 Plastic on plastic makes little friction, until you load the gears or at high speed. Without proper lubrication, which I don't see in any of your creations, your creations will not last long.

Subaru be like:

@CamdenBowen

9 ай бұрын

Most reliable Subaru transmission

@lucidity7532

9 ай бұрын

the sti trans is actually pretty bulletproof, theyve been seen to handle 700whp reliably. the wrx trans sucks ass tho itll grenade at anything over 400 cause its designed super poorly with little center support

Money shift it

Man how you do to keep the talking like that all the time? It seems like you have eaten a man Vin Diesel to be exact

@CamdenBowen

10 ай бұрын

Having a deep voice is cool until you have to speak all day or try and project your voice, it actually hurts sometimes lol

fourth

This guy would get more views if he didn’t drag his show on. That’s the first thing I think about and decide not to watch

not strong enough to drive a car, so, who cares?

dogbox for clutchless upshift. straight cut gears for strength. dogbox is not stronger in of itself, as all transmissions rely on dogs and houses.

Money shift it