Grazie veramente....mi hai risolto un grosso problema 🙏

Thanks for this video, it has helped me to replace the keys of my car, greetings

Thanks for the video I just bought one for my car .....will try it out

Grazie fra me salvat

Nice Video ...

Hello , Can we just change the rubber (control buttons) since I just have cracked buttons? Thanks

איזה גבר..סחטיין על המאמץ

Hey, thanks for the video. I am still afraid if during the sensor removal from old key, i may end up deteriorating it. Is it safe the way you removed it? Will it work? Please help.

@uriginsburg4288

6 жыл бұрын

Pragnesh Trivedi no one can guarantee that the chip will not break. Yet, from my experience its shell is hard enough for protecting it, and even if you scretch it you are not destroying the chip. Be gentle and work slowly and it should be fine. If you are still worried, you can always go with the both keys, the old and the new since the chip is not related to the keys radio transmitter circuit but only to the car's ignition protection system. Good luck!

@pragneshtrivedi7126

6 жыл бұрын

Hi.. Finally i have successfully removed the sensor and reinstalled it. Thanks Again.

@moriartythemundane

2 жыл бұрын

Done one today, its a bit stressful as I expected to have trouble removing the chip, but, it fell out! Go for it. about 45 mins to do.

nice video - Where to get the chip or tell me the model thanks

@uriginsburg4288

7 жыл бұрын

Thanks, I assume that this is ID46 chip which you can buy integrated in a full kit (and not just the plastic shell) These kits are a bit more expensive than the shell itself... Please note that you will have to use a programming device in order to program the new chip. Good luck!

Between 1:17 and 1:23 there is some step missing because after removing the battery, there is no way I can see of removing anything more. Nothing just snaps out like it is shown in the video which obviously is edited in those seconds.

@uriginsburg4288

6 жыл бұрын

Sandesh D'Souza the shell is not one block. The video was cut so you will not get bored looking at me forcing it open. But I did not use any tool, just hold the both sides and force it to open, exactly as shown in the video.

Sì ma il problema è aprirla 😅