Hydro-Fracking this Water Well, When A Customer Stops by and Shares His Fracking Results!
H2o-Mechanic Online Store
www.h2o-mechan...
Order Direct from Us.
Links to Common Well System Products
20 Gallon Bladder Tank amzn.to/3AarHhX
40/60 Pressure Switch amzn.to/3QyJMeO
Brass Tank T Manifold Kit
amzn.to/3p89gUY
1/2 Hp 240v Pump 150ft Max Pumping Depth amzn.to/3zGY3iZ
Rubber Tape for Wire
amzn.to/3vSR1GI
Wire Splice Kit amzn.to/3A7U68q
In this video we perform a procedure called Hydro-Fracing. This helps to flush out the Water Veins of natural occurring sediment and allow them to flow water at a faster, less restrictive rate. Hydrolic Fracking is Highly Successful!
There's dozens of Helpful Plumbing Videos on my Well Pump Q&A Playlist, So go check it out!
Comments are Always Live!!! Here to answer any questions you may have.
Show Support by Subscribing if you Learned Something New.
Best Water Well Plumber on KZread!!!
Donations are appreciated!
Hwdracing@gmail.com. - PayPal
Philip-Hensley-3 - Venmo
❤️ Super Thanks - KZread
#nowater #hydrofracking #drilling #drillingmachine #educational #discovery
#wellwater #plumbing #wellpump #submersiblewaterpump #pressuretank #pressureswitch #plumber #tradesman #homesteadadvice
Пікірлер: 102
It's great that you will credit the cost of a failed frack toward drilling a new well! I'm sure that must make a customer a whole lot more comfortable with trying to frack an existing well. It is really refreshing to hear from an honest businessman who actually cares about giving his customers proper service. Take care and God Bless.
Seems funny to hear that most people need 800 to 1000 gallons per day of fresh water. In my 20 years in the Navy, most of it on submarines, we had to get by with an evaporator that made 8000 gallons per day of fresh water. We didn't like to run it continuously because of noise. Roughly 3000 gallons of that was used by the steam plant and the rest for 150 people for cooking, cleaning, showers, etc. Anyone caught taking a "Hollywood" shower (i.e. more than about 2 minutes) got to spend 4 hours or so of off time cleaning the evaporator. With a little discipline by everyone, we rarely ran short. Great job of explaining the process by the way and really enjoy all your videos.
Hydraulic fracturing has been around since 1947 and was developed for the oil & gas industry by Standard Oil Company of Indiana (Stanolind). Some people improperly give credit to Halliburton as the developer of that technology, but Stanolind held the patent and performed all the field testing. They then licensed it to Halliburton during 1949 which then commercialized that process. I had the pleasure of applying that technology to countless numbers of oil & gas wells around the world, plus even teaching hydraulic fracturing training classes. Great to see it being used to treat water wells now.
I must have been watching an old video as i was worried that you had no guard on the pto. Great to see it’s done, stay safe.
Nice that other customer gave you the good news in person.
Nice to hear when your father says “I’m proud of you son”
This was pretty fracking cool!
I watched a couple of your videos this week trying to diagnose a well issue and you do such a good job explaining things ive been watching the rest of them. Imagine my surprise watching this one when i realize you're local to me! 😂 Thanks for all of the informative content!
Hey I'm kind of an idealist I come up with some ideas I was watching one of your other videos of you hide your fracking well I noticed that she was getting air in your lines from the sight glass I was going to give an idea of moving the sight glass to the other side of the tank and put one at the top a connection at the top and a connection at the bottom so when your tank is filling up you see it on the other side and it doesn't interfere with any air getting into your line
I love the umbrella
Nice to see how wells are drilled and maintained in the US.. Just wondering why single strands are use for wiring... better to use a polyurathan e or simular..
Didn't realize you were in South Central VA. Our hunting cabin in nearby (Ebony, VA in Brunswick County). I enjoy watching your work. Thanks!
As an old semi retired oilpatch pump mechanic just seeing that Wheatley makes me a bit grouchy lol. Not bad pumps, just not the most serviceable. Word of caution, make sure the valve cap thread condition is 100%. I don't know how hard you push it, but I've seen Wheatleys blow the caps out a few times in higher pressure applications due to bad threads. It wouldn't be good if anyone was standing around close, those 10lb caps would leave a dent.
If everyone put the customer first as you you'd probably have more smaller businesses thrive instead go under because of people basically scaming my hat is off to you an prayers to you an your employees an clientele.Merry Christmas
You videos are getting sooo good!
Always great info.
I didn’t know you can place a pressure tank on its side. This will be handy for me to do.
@kevinrenn9123
10 ай бұрын
I don't think every type can be put on it's side, I'm guessing it has to be a bladder tank
Ive always based any calculations ive done in the industry at 75gal/day per person.
Glad to c that cover
Ever squeeze back acid into the formation to help open it up?
Nice work, do you ever use pitless adapters on the side of the casing to keep the pipes underground?
When fracking can you cause nearby wells to reduce there flow rate by plugging their veins?
@Itemsforsaleontario
Жыл бұрын
Curious about this too
@dougadams9419
10 ай бұрын
their flow rate. "there" is a location.
What you said that you don't test your success, but see whether calls you back or not. Surprisingly I also do that, here in India I am a Consultant Hydrogeologist, and people rarely call me after ground water surveys. So I know I have around 90-95% success rate.
16:15 1000 gallons a day? That's ridiculous! During the Summer I average 4500 gallons a month or 150 gallons a day, and During Winter about 2200 gallons a month or about 75 gallons a day. Summer usage is higher due to watering the garden. I live in a rural area but have County Water. The well was shut down when the County installed water lines before I moved here.
This was a decent enjoy able video thank you for it.
nice job
Such an honest biz!
Nice glue job.
So fracking a well mean open the bedrock up to get more water by using pressure and water to blow a bigger hole down at the bedrock, why didnt you say so, i had to google it to find out.
@Dingbat217
Жыл бұрын
I doubt very much that you are actually putting in new cracks in the bedrock when hydro-fracking, what I think is really happening is that you blow back some of the finer silt out of the 'filter cake' that fills up around the water extraction point when finer silt / material gets sucked in between some of the coarser material and that eventually blocks it tight and slows down the water extraction. When you hydro-frack that borehole you essentially blow the fines out of the coarser materials and opens up the water vein again allowing for a higher water extraction rate again. Now how long that lasts I guess is up to chance, maybe the fines are blown far enough away from the extraction point that then don't come back and the effect lasts for a long time? That's probably the reason for the prolonged pump / flush time after the initial filter cake has been blown away?
I work in the oil and gas industry and we do something very similar and similar names
600-1000gallons a day! Wowsers, that's a lot of water! We use about 200L (about 52 US gallons) in a day for two adults, and that includes everything! How does anybody use that much water? We don't have our own well but are on metered water and that hits around 72m3 a year!
@Debbiebabe69
10 ай бұрын
Probably using ancient toilets that blast 9 litres through every time you flush when half a litre is perfectly fine for a piss,
I wasn't worried about that pto shaft breaking and hitting your leg as much as I was worried it would break and take off your Johnson and attachments.
😊
cool.
Is that one of your old drill rig trucks and if so what kind is it as I see it’s right hand drive. 🐢
Let's start fracking. It's the same procedure as gas and oil drilling fracking on a lower scale ⚖️
@h2omechanic
Жыл бұрын
Yup. Same technology, just smaller scale
@marvintalkington9724
Жыл бұрын
@@h2omechanic you're doing great keep up the good work. Always enjoy watching you doing this. Highly educated videos. And you are right there are only a few of us left that works these trades.
@cementer7665
Жыл бұрын
Somewhat, only it appears that no proppant is used to keep the fractures open. But, he is correct about the possibility of the fracture extending to neighboring wells, as this is one of the conditions that must be monitored when fraccing oil and gas wells, given the possibility of exceeding the pressure rating of either the older casing, and/or the surface equipment on the older well(s).
Does it not freeze there?
wish our wells were set like these in the pit.l when it is 118 outside and you want some cool water no way all hot water
What the frack did I just watch 🙈
So based on what I have seen in this video; it is OK to turn a pressure tank on it side of there is not enough clearance in the well house to stand it on its base, is there a reason you did not use a tank tee as is standard practice? Thanks
Sorry on that one did I not see the copper of the Red wire?? AT 18:21 just above your thumb!!!!
Maybe a little overkill but why not run your power lines inside pex material isn't that much
Woah, didn't know you were into motorsport dude, what's your flavour?
@h2omechanic
Жыл бұрын
Enduro cars/dirtbikes. But recently haven't had time.
Subbed brotha 🤘 Nice vid
How much does Hydro-Fracking cost 1 well?
Can you frack gravel and clay?
@h2omechanic
Жыл бұрын
No
@h2omechanic
Жыл бұрын
Only solid rock formations
Please explain exactly what you are doing when you Hydro Frack a well
@cementer7665
Жыл бұрын
You are using pump pressure to break down the formation's (water, or oil/gas bearing) resistance to accepting the frac fluid. As the pumping pressure increases, at some point the formation will start taking the fluid, and the pump pressure will decrease, as this indicates that a fracture has been initiated, increasing the pump rate will propagate the fracturing of the formation, by increasing the length and height of the newly created fracture. To keep the fracture open, after the pumping has stopped, some form of proppant (usually a cleaned and graded sand, but it could be a man-made proppant, which would be used on a high pressure well, as it would have a higher resistance to crushing, than sand), as the formation pressure works to 'heal' the fracture. The proppant would be blended into a gelled frac fluid to keep it in suspension as it is being pumped. The fractures allow the well to produce more water, or oil/gas, due to the increased surface area created within the formation, allowing more flow into the well bore. BTW, in the early days of the oil and gas industry, well "fracturing" was done by running a vessel filled with nitroglycerin to the required depth, and having it explode to create fractures within the formation, AND, in the late 1960's and early 1970's several wells were fracced by detonating low yield nuclear devices at the depth of the oil/gas formation, but while the concept was successful, the resultant radioactivity rendered the natural gas un-usable.
@spambedam
Жыл бұрын
@@cementer7665 Nuclear explosion fracking? ? Holy moley that's going to be news to just about everyone.
Question…. My well currently has a 3”, 1/2 HP submersible 3 wire pump. My well depth is 120’ roughly. I’m want to convert it from power line electricity to solar powered. I know that this is possible to do but my question is…. Do I have to use a special pump designed for solar power? I can’t find anything saying yes or no.
@crabmansteve6844
Жыл бұрын
All you need to do is make sure you have the DC inverted to AC and enough power to feed that pump. It's very simple, just going to cost a little bit of money. Grundfos makes DC pumps, but they're more expensive than a standard DC to AC setup.
@Debbiebabe69
10 ай бұрын
Power is power. If your pump requires 48VAC for instance, at 2 amps, then as long as your power source can provide 2 amps at 48 VAC it dosnt matter if it is grid, solar, hydro, or a turbine full of meth-fuelled hamsters on hamster wheels.
Hi, I am trying to fix never stopping well pump. I changed pressure switch and it worked for 2 months and same problem started. This time, i replaced well tank, check valve still same. Pressure lingers at 42-45 psi never reaches 50. My switch is 30-50. Could you please help us sole this problem? Thankyou
@h2omechanic
Жыл бұрын
What size pump do you have? How old is it, & how deep is it. The most important thing is how deep is the water level? What brand pump is it? Or where did u buy it? Also try turning off the breaker & see if the pressure drops to 0. If it does, that's the issue...there's a leak somewhere in the drop pipe, probably a bad fitting at the pump leaking out most of your pressure.
@shardulendrasherchand7026
Жыл бұрын
Hi, Thank you so much for the quick response. I don’t know the depth of the well and depth of water level also. Pump is more than 15 years old. I don’t know where it was bought, it was already dropped before I moved into this house. I will buy long tape and try to measure the depth of well. I might rent a tool to measure depth of water surface. Good thing is we still have water and pump runs - continuously. 😅. When breaker is off, pressure does not drop to zero quickly at least for 5 minutes. It lingers at 42 PSI Thank you.
@shardulendrasherchand7026
Жыл бұрын
Size is HP 1/2 - I got this information from control box.
@h2omechanic
Жыл бұрын
Your pump is simply worn out & it's time to replace it. I'd recommend replacing all fittings with brass or SS. Turn off the breaker when your not using water so it won't kill the pump, til u can replace it
@shardulendrasherchand7026
Жыл бұрын
Thank you for your recommendation. I will replace it myself and let you know any updates. Thank you.
What about those well manager systems?
And you get in a truck the shift on your left hand and when you show you are driving a left hand steering wheel
I'm going to search hydro-fracking Illinois. My well only fills to 75 gallons every ~45 minutes.
Is there any risk of damaging a neighboring well during the hydrofracking process
@h2omechanic
Жыл бұрын
It wouldn't damage it, it could connect to the other wells water vein. Rarely happens unless it's within 50ft
Too bad they don’t make a siamese well pipe. One pipe for the water with a conduit for the wire bonded to it.
Is the date out on that camera? 21-05-02. Or are you VERY LATE in your publishing?
Poor quality cable used it should be double insulated and rated for under water use. Taping should be every 1-2 meters
Waiting to get fracked 😂😂😂
Why do all your videos look like you are driving right hand drive vehicles ? Does your camera invert the image ???
@oregonwinger64
Жыл бұрын
I noticed that, too.
Ear plugs will save your ears from tinnitus.
@davidpawson7393
Жыл бұрын
Lube will save your wrists from Carpal Tunnel syndrome.
Where are you located?
@h2omechanic
Жыл бұрын
Va
@poseypapusdiazfamily4630
Жыл бұрын
Will you come do some fracking in Georgia? We have two wells that need it. Maybe drill an extra well too.
@jason7475
Жыл бұрын
@posey papus Diaz family Ya on the way stop and frack mine
@h2omechanic
Жыл бұрын
Fracking trucks are around $400k for a complete drivable rig, that's why so few companies have them or travel with them. But it gives me good ideas to possibly expand in the future. Fuel just costs so much.
👍👍🇨🇦✌️🇨🇦✌️🔧🔧
How on earth does the camera reverse stuff like this? It actually looks like the drivers door is on your right and the shifter on your left???? Weird. I guess it's some kind of "mirror image" trick but I can't understand it... LOL 🙂Like really, his left arm is on the shifter when in reality his right arm is?????? (at the very beginning of the vid)
@h2omechanic
Жыл бұрын
Every phone face camera does it.
@DMIINC2013
Жыл бұрын
@@h2omechanic It can be changed...
@RobertKohut
Жыл бұрын
@@h2omechanic DSoesn't explain how... :-)
So wild to hear you say a household needs 1000gal per day to make things work. It's me and my wife off grid. We use water 1200gal per month and that's a 1000 sq ft garden, daily shower, laundry, dishes, cooking, eating and drinking. Come on humans get your head in the game
@Debbiebabe69
10 ай бұрын
I always love it when you see those South African adverts for saving water, with quotes like 'if its yellow let it mellow' saying if you stop flushing the toilet when you flush you save 9 litres (2.4 US gallons) per piss which can add up to 144 litres (38 US gallons) per day of water saved, at the cost of your house stinking of piss. How about fixing the obvious? 9 litres is complete overkill for a poo, never mind a piss. Half a litre (0.1 US gallons) is perfectly fine for a piss, and even a shit should only need one full litre (0.2 US gallon). Sort the toilet out, stop using toilets from the 1950s, and you can save a LOT of water without having your house stink of piss....
@kevinhensley7654
8 ай бұрын
Funny , my wife is not going to live OFF Grid .
I still don’t understand hydro fracking cuz ur audio is too low!!😊
You made a common mistake glossing over or totally failing to explain crucial points of what you were doing and why. Not sure what was pressurized to frack the well. I'll guess it was water. I have seen a driller do what he called "develop" a new well by pumping it full of air but I didn't see or hear an air compressor so I'll guess you pumped water. More detailed please. We are watching to learn something.
I lost my cap section down 130 feet into the well and i dropped a magnet down and retrived it quit easely
Tell me about tapeing again, I only heard it about 7 times
@spambedam
Жыл бұрын
It's important and it's commonly done poorly. (I guess) My well was (is) wired with 3 wire molded cable, I'll guess it's purpose made for that application.