Hydro Boost vs Vacuum Power Brakes, Which is Better?
🔧🚗 Dive into the world of brake system upgrades for your classic American muscle car or truck with Dave from First Place Auto Parts! In today's video, we explore the options available when it's time to apply power to your disc brake conversion kit. Discover the differences, advantages, and considerations between vacuum-assisted brakes and the modern hydro boost system.
🔍🚦 *Key Points Covered:*
1. *Packaging Comparison:*
- Compare the dimensions and packaging of the vacuum-assisted brake system and the hydro boost unit.
- Explore the challenges posed by the larger vacuum canister, especially in tight spaces like big block Chevrolet engines.
2. *Adaptability and Fitment:*
- Understand the adaptability of each system based on your vehicle's modifications, engine type, and clearance requirements.
- Learn about the challenges posed by aggressive engines with less than 14 inches of vacuum and how it influences the choice between vacuum and hydro boost.
3. *Noise Considerations:*
- Delve into the noise factor associated with vacuum pumps, especially in applications where a vacuum assist unit might not get sufficient vacuum.
4. *Hydro Boost Advantages:*
- Uncover the advantages of the hydro boost system, such as compact dimensions, adaptability to various powertrains, and its role in simplifying brake system upgrades.
5. *Options at First Place Auto Parts:*
- Explore the options available at First Place Auto Parts, including full-size 12-inch vacuum boosters, polished or unpolished eight to nine-inch boosters, and the modern hydro boost units.
- Find links in the video description to the products discussed for easy access to the components you need.
🔗🛠️ *Get Your Brake System Upgrade Parts at First Place Auto Parts:*
- Visit First Place Auto Parts for a variety of brake system components, whether you're aiming for a factory-correct restoration or a modern upgrade.
- Benefit from options that cater to different build intents and provide the performance and appearance you desire for your classic car or truck.
👍🔧 *Conclusion:*
- Make an informed decision about upgrading or converting your brake system by considering factors like packaging, adaptability, and the specific needs of your classic vehicle.
- Thank you for watching! Remember to keep the hammer down and drive safely with the right brake system for your classic ride.
🚗🔩 #BrakeSystemUpgrade #HydroBoostVsVacuum #ClassicCarRestoration #FirstPlaceAutoParts #ClassicTruckBrakes
Пікірлер: 45
I’m doing a total restomod of my 70 Firebird, yes I’m doing the whole Ls and tranny swap, along with full suspension, and brakes to include the rear brake disc conversion. I’ve never liked the stock brakes even while driving it with the stock 350 two barrel, so when I found out about these boosters I completely felt like it was a game changer!
Good video ,there is the 3rd option where you have the corect size master and slave or calipers and fully manual brakes. Had a wilwood kit like that on a 4000 pound car and it had the best feel ive ever felt.
Brake line pressure difference between the two would have been helpful.
Thank You for the informative and educational video. Have A Fast Day! 🚗🚙🏎️
Nothing about brake line pressures? 700 verse 2100 is a HUGE difference and you skipped right over it.
I laughed at the belly analogy. That's a funny way to put it. Packaging is certainly very important!
@FirstPlaceAutoParts
2 жыл бұрын
It really is!
The fact that one is ginormous more effective than the other, would’ve been something worth mentioning don’t you think?
Thanks for your blatant hydro boost pitch. A pity perhaps, that you chose to avoid mentioning that low vacuum issues with warmer camshafts can be dealt with a simple vacuum can. Cheap, silent, usually easy to mount and have been used for decades. But not much profit in those compared to a hydro boost kit is there…
Very informative and professionally done. Good stuff
@FirstPlaceAutoParts
2 жыл бұрын
Much appreciated!
72 Chevy K5 Blazer. 90% of the items on the table sucked. I could not get the nose to dip on my K5. She just would not stop. Changed EVERYTHING! Then I tried the Hydraboost power steering system. It nearly threw me through the windshield. I never had another stopping issue, even when towing heavy loads.
@bibleortraditions
Жыл бұрын
@lAcid Rainl I am installing a system now on my "new" 1974 K5 Blazer project.
@Supertommy68
Жыл бұрын
Did you have any issues with the shaft length to the factory brakes? I'm putting this on my 72 K10 and seems the output shaft is too short. Pedal seems too low to the firewall.
@bibleortraditions
Жыл бұрын
@@Supertommy68 It actually uses your old hardware which connects to the brake peddle. It connects as usual, and it is adjustible.
@Supertommy68
Жыл бұрын
@@bibleortraditions Thank you. My kit must be a bit different, it came with it's own shaft preinstalled with coupler nut.
I have a 1956 Chevy with a454 using a mustang II rack can i you a hydro boost in my car, what is the GM power steering pump out put pressure for the hydro boost, what is the minimum i can use, mustang II rack needs about 800 to 1000 pounds, can i run the mustang II and the hydro boost with 800 to 1000 pounds of pounds
trying to get into cars. what would be the best option for a 1982 buick riviera coupe 2d?
I have the hydro boost system in my2500 Silverado I just want to learn more about the system so if the power steering goes out do I lose the brakes also
@FirstPlaceAutoParts
2 жыл бұрын
With most hydro boost (similar to vacuum powered brakes), if you loose power to the system (in this case power steering) you should have one or two brake pedal applications before all power assistance is lost. After that, the system reverts to "manual" (no power) system. You won't completely loose brakes but it your stopping distance and the pedal effort required to make a safe stop will be significantly higher. Keep an eye on the serpentine belt that drives the power steering pump
@philzail2532
2 жыл бұрын
Same here, I have a GMC 3500.
Great video. What make/model/year is the hydroboost unit from? I went to your web site and didn't see any units listed.
Hey man great video and I would love to buy that 454 air cleaner on the wall 😁
@kongolobuluanda2169
2 жыл бұрын
🤝
Very useful information. Thanks
Is it enough vacuum on a Landcruiser Diesel Turbo engine 4,2l or should I replace for an hydraulic booster...(the 80series has very weak breaks)
i have a k20 chevy automatic, im going from a booster to a hydrobooster and i’m just wondering if there’s any difference in the rod that hooks to the pedal, is there another bracket or is it just plug and play with the pedal?
@crimthegrim
9 ай бұрын
Yes there is the location of the pin on the peddle is higher up on the pedal on the hydroboost vs vac booster
Appreciate the explanation regarding the vacuum and boosting breaking system. One question that I have, considering there is only one power steering pump, can the hydro boost for the break and the power steering be connected on the same pump? Is this practical?
@u03862
7 ай бұрын
Yes you can use the existing power steering pump
Another issue is if your car, like my 56 Chevy, does not have power steering, but has a big motor, and not much vac. Looks like manual brakes are my only choice. Disc on the front, drums on the rear, and a new manual master cylinder. Correct??
@GrimRepair
19 күн бұрын
They have electric vacuum pumps, there is a turboed sabb that uses one from the factory.
We own a 68 Mustang w a 289 engine. Is it capability to my car.
I wasn’t able to find the hydro boost system on your website for a ‘92 OBS GMC k1500
@GrimRepair
19 күн бұрын
I would look into using one for an astro van.
@justintyme1449
18 күн бұрын
@@GrimRepair I did find it and the adapter mount, still need to get it installed, but waiting till after I do a solid axle swap, since I'll need to have the brakes bleed
@GrimRepair
18 күн бұрын
@justintyme1449 After I put a 3000lb camper in my truck, the brakes seemed inadequate.It stops much better after I put in a hydroboost and moved the peg on the pedal.
Does hydro boost steels horsepower?
Does the hydroboost loses horsepower?
Can you use the Hydro boost with Drum brakes?
@GrimRepair
19 күн бұрын
Yes
Looking to build a Cummins range rover...who's with me
0:00 3:00
👍🏾👍🏾👍🏾👍🏾👍🏾
Usually your vids are good and informative... but did you really just waste all this time with space and volume and appearance... and negate totally the DIFFERENCE in what each does? HYDRO stops you on a dime with very little pedal effort (and throws you through the window if not belted)... there... the Reader's Digest condensed you skipped.