The one dislike was from the guy you smoked 😬

Great video Darcy, holy cow mate that thing really moves out, awesome job by Team Canuck.......

Good looking clutch. Thanks for the ride.

100 mm lockable front suspension are dope love the bike setup 👌clean ma guy definitely love the bike💯💯💪💪 I definitely will be upgrading my bikes! Nice work 💪

Hi nice ride beautiful build .thank you for sharing it .

That demon 2 is a bad ass fuckin bike. Outstanding work Mr. Darcy

love the Baja beetle

You are moving bro! That's a sick build. I need this!

Bike is beautiful!

@dlhperformance7169

Жыл бұрын

It sure is!

Woah My man hit the hWAy Wit it

Awsome ride

Man I have got to get me one of those frames with the gas tank included!! They look pretty slick and eliminate that weird looking tank that comes in the kits. Right now I'm using a Schwinn frame and bike that has been sitting outside for ten years. I've got an engine kit coming that I think should get me moving to about 30mph, but I'll hopefully get to the point that I can build something similar to what you have going on here. I've also got two mopeds that I got from Craigslist for a song and dance an express which is two stroke and a four stroke Zuma. The zuma is pretty solid and does around 40mph, but my goal is to get everything up to around 50-55mph so I can take them to work and save the gas money. I also have a 200cc Lifan motorcycle that is brand new, and I plan on riding that thing until I can get the mopeds and bike up to snuff and then I'll rotate them. I'd certainly like to build something from scratch though like you have done here and I can go with top shelf parts from the get go. I don't really know if my Schwinn is going to handle doing 45-50mph TBH, they're not really built for that, but I'm sure the frame you have is much more capable.

@dlhperformance7169

5 ай бұрын

performance engines on basic bikes are not recommended , choose a proper gas frame, speed rated tires

Looks scary fast!

@lllllsp1d3rlllll

Жыл бұрын

If he had taken the time to not b lazy and add gears then yes it would b fast

I love my mini lol sounds nice

Damn that's fast

Rev baby Rev!!

Super :-)

Wow

I like to see how fast you are going on your bike....! My silver snake motorized bike dose 42 mpr.... With out the NOS / N20 system.

Bro i have been building motorized bikes since 2012. My first was a 2011 skyhawk. Gt5 style. I had no clue what i was doing. Eventually blew it up. Now i got a pretty good set up but my dude your set up is sick bro. Can you put up some links to where you get your parts from?

@dlhperformance7169

3 жыл бұрын

dlhperformance1.wixsite.com/website

Nice! I think I know you but I subscribed anyway lol.

Bike gos 🏁 🚲💨💨💨💨💨💨💨💨💨💨

That idle has me jealous lol So perfect!

I don't think he really wanted any smoke, I'm getting ready for this summer myself, there's an eletric guy an a 2 stroke guy that I'm gona smoke, 😆 can't wait

@ChristopherJones16

3 жыл бұрын

I think he was making a "smoke" run to pick up some "smoke" and just wanted to be left alone.

@Op1zilla

2 жыл бұрын

👽👍

Make more videos

Slide sticking? You have her tuned very well.

I got 3 of your saf clutches from blakoonmotorizedbikes and all came with red springs and wanted to buy some green and brown ones and a couple of them New g2 reed adapter for that cylinder from you thanks

@darcyhemeon4309

3 жыл бұрын

Just pm me on facebook

In love you sell those intake reeves

@darcyhemeon4309

3 жыл бұрын

Yes I do sell a kit

easily hitting 60mph

If it keeps up with cars on the highway it's a good bike

What's the name of that kickstand and who sells them please and thanks👍🏁cool bike, great job..

@dondledbetter1779

3 жыл бұрын

which is more reliable than the other of two stroke n or four stroke in others all performing

@darcyhemeon4309

3 жыл бұрын

Its called a Drop down kickstand . You can find them on Amazon , buy the one that wire is bent like a small foot for best support.

@m.kasper7646

3 жыл бұрын

@@dondledbetter1779 hi Don, I noticed you replied on my comment, You lost me with your comment though, My question is about the drop down kickstand. Thank You Darcy.

@darcyhemeon4309

3 жыл бұрын

Mark sorry about late response

@m.kasper7646

3 жыл бұрын

@@darcyhemeon4309 it's all good Darcy, thanks for the response, And I bought another clutch thank you for the spring hookup, you're the best🏁👍🏼✌🏼

How did you mount the magnet to your aluminum mag for speedometer?

@dlhperformance7169

2 жыл бұрын

epoxy

Plane why do very few have an imagination I can't wait to build myself one.

@dlhperformance7169

Жыл бұрын

the sky is the limit when building you are right , this was a customers build i did and people have budgets

I ran into a problem on my new build. Have similar frame and I cant find rear disk break adapter for my 203mm disk. Can you show what you made or help me find something that will work on mine?

@dlhperformance7169

2 жыл бұрын

go too the desciption [ title ] click it it will show you my contact information , thank you

How did you get the speed sensor on the mag wheel?

@darcyhemeon4309

3 жыл бұрын

Epoxy

i have the same set up. even with the vm 18 mikuni. but i need to know what you got your jets set on. i think the mikuni comes in 70 out of the box. can you tell me what jets you got it on ( main, and pilot jets so i can get the idea where to start at ).

@darcyhemeon4309

2 жыл бұрын

22.5 - 25 pilot 85 - 95 main

@m.kasper7646

Жыл бұрын

Wouldn't you have to know his altitude before making a decision to get a better idea on what size jets? He's pretty high up in Canada.

Maxxis hookworms in a 26" tire are 26.X2.5 .. i cant find a mag rated for that width .. are you just using the 2.125 rated rim with 2.50 tires ? cool if you are seems to be working...

@dlhperformance7169

Жыл бұрын

26 inch 2.50

Ethan smolik at smolikperformance.com Sells these as well he’s not the only distributor of the minarelli engines

Very nice!! Dont they have better cdi’s tho? Otherwise looks about tops!

@dlhperformance7169

10 ай бұрын

Yes they do , customers build this is what he ordered , i have a better ignition system call the Powerstorm from DLH Performance

Where did you get over ize Rims and frame? Great Job ❤️

@marthamryglod291

2 жыл бұрын

AliExpress

How to u stop the g2 reed from leakin please help lol

@darcyhemeon4309

3 жыл бұрын

I have a build video on the 70cc minarelli showing how to make your own paper gaskets , products too use and other tricks to upgrade the G2 Reed for a air tight seal

Dig you're baja bug dude, I have one too.

@darcyhemeon4309

3 жыл бұрын

1969 Baja with a 6inch pan lift

What size jets do you run in those vm18 carbs

@dlhperformance7169

Жыл бұрын

I'm running a 22.5 to a 25 pilot , 85 to 90 main , needle two notches from top, this is my setup ! yours dew to elevation , pipe , port work , could vary your setup . always go through a jetting process to achieve proper jetting

@cliffordbradford3257

Жыл бұрын

@@dlhperformance7169 your builds are awesome by the way. You do really good work.

Where can you purchase one of these minarelli hybrid engines?

@dlhperformance7169

2 жыл бұрын

dlh-performance.myshopify.com/

I mean what's not to like about it

how can i buy one of these and how much do they run? thanks in advance

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

How much do you charge to build your bikes?

@dlhperformance7169

Жыл бұрын

3k

Very nice ..does exhaust get hot on your leg ????

@darcyhemeon4309

3 жыл бұрын

No not at all

what is that clutch and how do i get one

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

How do I contact you I want to buy a motor

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

How can I order that clutch setup

@darcyhemeon4309

3 жыл бұрын

You can order through me on Facebook thanks

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

Hi, Is the sprock 36T?

@darcyhemeon4309

3 жыл бұрын

Yes its a 10/36 tooth . I like this combo, works well all around for bottom to top end , the engine can handle 32 tooth easy but sacrifices the bottom. Bike will easily do 54 mph , if you change to a 32 tooth will do over 60mph

@elmundodealexoriginal

3 жыл бұрын

@@darcyhemeon4309 ok, I made a 115cc engine with a motorcycle jog cylinder, that bike has 18 motorcycle rim with 2.50 tires, which is about 22-23 bike size, which you recommend to me so that I have strength on the climbs and speed in the plane

@darcyhemeon4309

3 жыл бұрын

@@elmundodealexoriginal a 24 tooth rear sprocket with a 10 tooth front

@elmundodealexoriginal

3 жыл бұрын

@@darcyhemeon4309 OK thanks

@m.kasper7646

3 жыл бұрын

@@darcyhemeon4309 with one of your clutches tell him not a stock clutch hahaha! A 10t-24t will need a good clutch or a Hella pedaler

What web site do I go to to buy a motor

@darcyhemeon4309

3 жыл бұрын

Contact me on Facebook please

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

I want that clutch

@dlhperformance7169

2 жыл бұрын

go to Description of video and my website info is their

Do you sell rear brake brackets

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

@dlhperformance7169

Жыл бұрын

yes i do

@normanpeterson3961

Жыл бұрын

Don’t see brake brackets.

@dlhperformance7169

Жыл бұрын

@@normanpeterson3961 email me on site or pm me on face b o o k

@dlhperformance7169

Жыл бұрын

@@normanpeterson3961 email me on my website

How much sir need one like the demon sir ?

@dlhperformance7169

2 жыл бұрын

Hi , go into description of video for my contact info

Any link to purchase this motor? Nice video by the way 👍

@darcyhemeon4309

3 жыл бұрын

Contact me on Facebook thank you

@buckdwildass

3 жыл бұрын

@@darcyhemeon4309 where do I contact you on fb?

@darcyhemeon4309

3 жыл бұрын

facebook.com/darcy.hemeon

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

How much for this engine?

@dlhperformance7169

2 жыл бұрын

dlh-performance.myshopify.com/

You are going to blow that thing up I don't get why guys build these fast engines and don't set them up on gears when it's so easy to do.just keep the roms maxed out why when u can go up a gear and build up the rpms again and gain even more speed with less heat and less stress on the motor and clutch gears.

@dlhperformance7169

Жыл бұрын

motorized bike engines are only single speed engines

@user-fn9mj2rq6k

Жыл бұрын

that may be the case but it should occur to someone with more speed is even more risk. I wouldnt want to promote this Idea without some regulation .

@lllllsp1d3rlllll

Жыл бұрын

@@user-fn9mj2rq6k well duh but it's not about building up speed go the same speed but less rpsms less stress on the motor it will last longer.the well built motors cost a lot.i priced the motor I want is $1,000

@user-fn9mj2rq6k

Жыл бұрын

@@lllllsp1d3rlllll well like I said in theory you are right but that is impractical in my opinion on a bicycle. But Hey you may be the one who puts the first one of your idea together.

The price for this engine is 850 it must be double the power of a phantom v3

@dlhperformance7169

Жыл бұрын

2 totally different beasts minarelli engines have a higher rpm range , the cyclinders are more expensive . expensive parts equal a more expencive engine

I'm really surprised to see that your using a good ol p.o.s. stock chain tensioner. Those things a hazardous for your health but if it's your bike do with it what thou will. But never in a million years would I ever even think about selling or giving a bike to someone with one of those chain tensioners on it. There's a 98% chance that it's going to fuck up some back rims because that's what they do. Stock chain tensioner / back rim destroyer lol.!

@darcyhemeon4309

Жыл бұрын

All the hardware in the tensioner changed to top quality, may be this is why so many have had issues, I've never had one fail after it's been improved or even loosen

@cliffbradford4679

Жыл бұрын

@@darcyhemeon4309 to be honest with you I think the best thing to do is remove your chain off your bike then take a link out of it then add a half link to get your chain to fit just right to where you don't need a chain tensioner. My bike runs smoother without a tensioner for sure.

@darcyhemeon4309

Жыл бұрын

@Clifford Bradford I've built alot of bikes I appreciate knowing how you like to setup your bike , I've ran them all different ways , tensioner and no tensioner , Thanks for subscribing

@user-fn9mj2rq6k

Жыл бұрын

they can lock up your back wheel at 40 or 50 Ive experienced it first hand. God was with me that day.

@user-fn9mj2rq6k

Жыл бұрын

​@@cliffbradford4679yes but not all bikes will allow that.

DUZ ANY ONE NO HOW U WOOD BUY FROM THIS GUY

@dlhperformance7169

2 жыл бұрын

my website is in descriptions, please look it up

@m.kasper7646

Жыл бұрын

Look him up on Facebook

35 mph? Lol

@darcyhemeon4309

2 жыл бұрын

A stock engine will do 25mph , this minarelli hybrid engine is 60mph on a 10/36 at 12k Rpm

SIR U NO I TRY ORDERING FROM U AN U DONT6 REPLAY FOR NOTHING

@dlhperformance7169

2 жыл бұрын

please go into description of video , my website contact info is available

Can I ask are those rims pretty strong?

@dlhperformance7169

Жыл бұрын

ive never had a issue