HUXWRX Flow 556K
Ғылым және технология
In this video we take a quick look at the new Flow 556K from HUXWRX@HUXWRX The Flow 556K is produced using DMLS (Metal 3D Printing) technology to improve upon HUXWRX's commitment to minimal to no-backpressure suppressors that so not affect firearm function and improve the user experience.
METERING DATA: docs.google.com/spreadsheets/...
PEW SCIENCE DATA: pewscience.com/sound-signatur...
AMAZON STORE: amzn.to/2H7Lq6Y
PATREON: / iv8888
GUITARSENAL: / guitarsenal
IV8888 ON THE WEB: www.iraqveteran8888.com
SHIRTS & ACCESSORIES: ballisticink.com/iv8888/
FACEBOOK: / iraqveteran8888
INSTAGRAM: @iraqveteran8888_offical
TWITTER: @iraqveteran8888
AMAZON NOTICE: As an Amazon Associate, Iraqveteran8888 earns from qualifying purchases.
DISCLAIMER: Our videos are strictly for documentary, educational, and entertainment purposes only. All shooting is performed on state-approved firing ranges under the supervision of trained professionals. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZread) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. We are not instructing our viewers on how to modify firearms, accessories, or otherwise to change their basic legal function. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance we include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes to drive commentary and allow freedom of speech.
Copyright 2022, 88 Industries, LLC
Пікірлер: 198
It hurts to watch videos on sweet silencers when you live in a state that makes them illegal 😭
@Isaac_5.56x45
Жыл бұрын
Massachusetts here, tons of guns, not a single silencer (kind of), we are working hard to change that though.
@jakejake7162
Жыл бұрын
@@Isaac_5.56x45 with Healy in charge, I don’t see them becoming legal anytime soon. I do hope someone with deep enough pockets can make some noise that leads to some change. But so far I’ve been let down with how the public tends to vote away their 2nd amendment rights in MA. You’d think one of the oldest parts of our country would care a bit more about the constitution this country was built upon.
@mattcron9421
Жыл бұрын
Yes it dose
@FogGoblin
Жыл бұрын
We all infringed. Only Wealthy Butt Kissers are allowed them.
@11ride4life
Жыл бұрын
@@Isaac_5.56x45LOL Im in California and suppressors are illegal here as well, but there are plenty of cans just in the hands of police and other gangs / criminals.
Thank you so much. I love my OSS HX QD 556. Your content is extremely valuable and I still proudly display your autographs that I got in a Man Can quite a few years ago.
Great work as always Chad. Great shoutout to Jay at Pew Science. He's over at /r/NFA regularly.
Love watching suppressor videos! It makes me want more and more
This is pretty cool. I'm glad you covered this one
Good to see you Chad, great info.
Awesome Chad, thanks for the share
Tried out my 7.62 and 5.56 suppressors today . Quiet 🤫. And when I tried the hxqd 7.62 on the ar15 it was even more quiet . Did not need ear protection using either suppressor. I’m more than happy I purchased this product.
HO-HO-HO, merry Christmas gentlemen.. keep the information coming, George
Wow. I'm going to have to build one of those machines
I always liked OSS cans from the first time I saw them at shot show when they were brand new. I knew the design would ultimately require 3-D printing to be reliable, and when I saw the machined & assembled cans coming apart in the field sadly I was correct, but now that it seems they have perfected the 3-D printing and change their name to I assume distance themselves from the problems they had in the beginning I have a feeling they will be very successful. I know soon as I get out of California and get my FFL again I will be selling these cans as well as using them myself.
good to see the new tech
Thats amazing 👏.
Definitely a nice looking can!
this is awesome😍😍😍
Good video brother
Wow I'm amazed
Looks good. I want 2.
@daniellebanky463
Жыл бұрын
Cough up $2500 or so 🫠
That looks like your modern James Bond silencer! Very stylish, too. 007 Forever! 👀
I already put in my paperwork 2 months ago, didn't know it had a 10,000 round limit, but hopefully cleaning it as the manual states (submerging it in solvent for 24hrs) after every range would bump up the round count. HUXWRX is a little unsure about their warranty with this suppressor and said it'll be a case by case for repairs.
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
@rico989
Жыл бұрын
I got this as well when it gets approved so far I'm at 5 months I'll probably put in for one of their HX-QD
@Furiouspenguin27
Жыл бұрын
Dawg that’s 10k round count with 0 cleaning and full auto
@kungfupandas1
Жыл бұрын
I'm waiting for the trucking LLC technology to catch up. Never the first edition
@UHK-Reaper
Жыл бұрын
What kills all my silencers.(yes respect OG H. Maxim lol) call it whatever muffler, can but I got stainless, aluminum, titanium ect. variants for different calibers. Short barrels and HEAT! That's what kills cans. I have a 100% titanium banish 30 that stays on a Mk18 and just gets beat up the baffles will erode and pit. I have one on a RPR bolt gun and it looks brand new. Just my 2 cents.
That's awesome
Hello Chad where can I find the video you made on handloads for the M1A you did a few years ago. It was awesome. Thanks
Simply the best Suppressor ever.
Would y’all do a video on the Law Tactical ARIC? I’m interested in them, but I don’t know if I would trust them as anything more than a range toy.
How about doing a huxwrk's Ca$h 9 on a 350 legend? I'm looking for a can to muffle my 350 legend to hunt with.
I cant wait for it to be affordable for the home hobbyist to be able to 3D print metal at home.
@11ride4life
Жыл бұрын
Been waiting for years, once it does happen I bet the tech gets license controlled just like FFL/FEL
What’s the cool silver thingy on the rail of the 11’
I wonder if an ultrasonic bath after every range outing would lengthen the life of the can or if it's more to due with the metal fatigue.
@J_D_Rambro
Жыл бұрын
I hope to see a reply to your comment.
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
It's about time
Man I'm still waiting on a suppressor from 4 months ago, was hoping to stop at 2 but some of the newest latest and greatest make that hard.
@mattyb249
Жыл бұрын
lol only 4
@Sizukun1
Жыл бұрын
@@mattyb249 When I bought the eForm said a median wait of 4 months, now its up to 8 months. Biggest reason for not buying more suppressors: the year long wait times.
@FogGoblin
Жыл бұрын
Must be nice to be a Wealthy Butt Kisser.
@mattyb249
Жыл бұрын
@@Sizukun1 lol i feel it. same here. waited 7 for my first just under 9 for my second
@Sizukun1
Жыл бұрын
@@FogGoblin Keep being poor and trying to bring others down I guess. Let me know how that works out for you.
I’m wondering if this would be a good fit for my X95?
I love my 556 TI
It's hard to tell on video but it sounds pretty quiet. Looks like a nice suppressor.
@lolaland5595
Жыл бұрын
Check pewscience for detailed review. Don't base suppressor performance off youtube
@AlwayzPr0
Жыл бұрын
@@lolaland5595 lol, do you know what is at the top of the pew science list?
@lolaland5595
Жыл бұрын
@@AlwayzPr0 Regarding which metric and on what host? His reviews are publically available and free, so are the rankings
@HUXWRX
Жыл бұрын
@@AlwayzPr0 we place 3rd but we are also shorter, lighter, and less back pressure!
Nice
I want one sooooooo bad!!!
You said it out preforms the original K can ever so slightly. Is it worth upgrading then if you already have the original K can?
@HUXWRX
Жыл бұрын
There is a night in a difference I would recommend checking out Pew Science
I live in Illinois… i can only admire from a distance
Counting down the days till shes released from my ffl...
Why does no one do any reviews on griffin cans. Jay over and pew doesn't. I'm really interested in their dual-lok and their HRT, but no one does any reviews
@tylerbansley5828
Жыл бұрын
I’m also extremely interested in the dual lok 5 but see no real review especially pew science
If a can review mentions Pew Science, it is a legit review (no sarcasm)
Could be their first one for any newcomers
Is the blow back on these cans really significantly lower than the more "normal" non flow through cans? That is my biggest issue being a left handed shooter with rifles. I would almost have to go either left eject or bullpup from the blow back I get on cans.
@spcpitts
Жыл бұрын
Yes they are. I can't shoot traditional can with an ar but I can with my oss. Best part is zero gas block/buffer weight tuning. If your a lefty how would a bullpup help? You want hot brass ejected directly into your face?
@EvLSpectre
Жыл бұрын
@@spcpitts Something like the MDR forward eject where it sits really low. Or similar to that if it's a bullpup. As long as it's on the left side or atleast capable.
@HUXWRX
Жыл бұрын
Yes it's a night and day difference!
30 cal version coming soon?
it would be cool to see a cutaway
hi sir how can i buy this silencer pls?
I'm ready for SpectersCAT
please do a meltdown on the DDM4V7 !!
Do you think you'll ever make another meltdown video? preferably to an Aero Precision rifle ?
Some it’s sintered Stainless Steel, I wonder if it could be cleaned with an ultra sonic cleaner to extend its service life.
😍😍
I love my OSS 556 , but hate that the new company made the muzzle break obsolete and I can’t buy a new one !!!
@HUXWRX
Жыл бұрын
The muzzle devices are the same and have not changed.
@wayne-oo
Жыл бұрын
@@HUXWRX Check your facts ! IFM6 Helix are a proprietary !!
That tacomhq though!!!
Would one of these suppressors work on a DPMS Oracle 5.56 ?
@TwoWheelNinja
Жыл бұрын
Yes
@ZboeC5
Жыл бұрын
Is the barrel threaded? If yes then yes. If no, replace barrel with one that is and you're good to go. It's not rocket science.
I'm still waiting on my 7.62 oss can. 265 days now. 90 days my ass! I'm waiting on 4 cans! I'm so pissed. Not buying any more until I get atleast one out.
whre to buy
My concern would be repair ability.
@kungfupandas1
Жыл бұрын
Yeah I think it would be toast
Anyone else not notice any gas on traditional cans, at least if not mag dumping?
Any idea how to remove them if they’re carbon locked?
FYI ... currently efile applications are processing in approximately 250+ days and with the, "brace" rule foolishness looming I'm betting the back log will again grow to well over a year for apps to be processed.
@jonhurley7889
Жыл бұрын
I'm already over that 250 days! In the beginning I was being told under 90 days now every time I start hearing a new number it doesn't happen.
@dothwalrus370
Жыл бұрын
Mine took over a year. :(
I’m pulling my paperwork for mine. There are too many variables with this can. Especially the service life.
@MoxJet629
Жыл бұрын
"The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes to round count."
Cries in New Jersey
I’m on day 242 waiting for mine
Chad is the can man
Seams incredibly similar to the velos. To the point i ask which one was designed first and who was the informant lmao
I’m now it’s a can of worms but the 10k round life span: Is that way below par?
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
I need to fi d someone here in Kansas that sales these because now I want one.......
So it’s not cleanable and only good for 10k rounds? What do you do after that?
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count. To clean it just soak it in some cleaner and shot it!
An ultra sonic cleaner should be able to knock those deposits out
There is no point to life to think I'd never be able to afford this or get this just to have fun with
@heythere4970
Жыл бұрын
You OK?
Working on 18 months to get paper work back.
Round life is a big turn off for the cost. I keep saying this. Otherwise.... It's definitely the future of suppressors. Amazing design and I'm sure they'll figure out a way to make the round count outlast any of your weapons
These are cool, but a real argument (again) for repealing the NFA (or at the very least taking suppressors off the NFA) because 10K rounds isn't great for something you cannot recore and basically own for life. Or, if you have a strike of some kind you're out a can due to the way it was made. For gov work, none of those things matter. For your average person, it is a bit of a letdown over the long run.
@ZboeC5
Жыл бұрын
The entire point of the NFA is to make ownership of things like silencers and SBRs onerous and "not worth it" for the average person because they don't actually want you to have these at all. The only reason people do it now is because they forgot to account for inflation when they made the stamp cost $200 in 1934. If a tax stamp still cost the equivalent of a new car today most of us wouldn't even think of owning these as they would be completely unobtainable for the average person.
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
@lonnieshaw5410
9 ай бұрын
wow everyone on here must be made of money, worried about having to replace after 10k rounds. Even at .50 cents a round that's $5k no way I could afford to blow that much in ammo. You all act like you go through that each time at the range geez @@HUXWRX
Chad 😎
10,000 rds kind of bummer for a can for life.
@Bushlore1
Жыл бұрын
On a good day thats more than $4,000 dollars worth of ammo. More like $9-10k. At that point I would assume you could afford another.
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
@greatlakespowerstrokefx4
Жыл бұрын
@@HUXWRX thanks for clarifying. Thats good info, what would be the expected round count in a semi auto platform in a carbine class or 3 gun environment?
@HUXWRX
Жыл бұрын
@@greatlakespowerstrokefx4 a lot! If you maintain your suppressor youll burn a few guns out before you burn the suppressor out.
@OD_G00N
Жыл бұрын
@HUXWRX Could you safely recommend this suppressor for an 8.3-inch Galil ACE? If so, would it be hearing safe with sub-sonics? I'm looking at my first rifle can, and this is looking like a solid contender. Or really, the ONLY contender, since I see very little info out there concerning other suppressors, mounted on barrels as short as the one I have.
The future is now
If only they made a shorty like this that was .30 cal and overbarrel. Would do very well.
@ZboeC5
Жыл бұрын
Why would it do "very well" just because it's 30 cal and "over barrel" exactly? Sounds like something you came up with just because it's what you want. Honestly it's dumb.
@exhaustus7437
Жыл бұрын
@@ZboeC5 Because, firstly, small things tend to be lighter. .30 cal tends to be bigger and heavier. You might even try to extrapolate that thought out to "longer" also. Now imagine a 6" .30 cal over-barrel suppressor only adding 3 inches to your build? Maybe you don't fully understand any of this, considering your response to my comment. It also would provide nice aesthetics onto AR platforms hiding that ugly barrel protrusion beyond the rail (depending on length of rail, had to mention this for you in particular). You're gonna try to argue any aspect you can against me now, even after reading my prediction.
@ZboeC5
Жыл бұрын
@@exhaustus7437 So a long explanation proving nothing. Nice. As someone that owns suppressors and ARs I fully understand what you are saying, I also understand it's just dumb. A suppressor being "over barrel" doesn't make it better and makes it even longer and heavier most of the time. The only reason any suppressor was ever made that way was for barrel alignment and to keep it concentric. Maybe you mean integral but that's not the same thing either. It just won't work the way you think it will. You don't want the blast going backwards into the can because the buildup would be insane.
@greatlakespowerstrokefx4
Жыл бұрын
@@ZboeC5 i believe he wants a 30 cal version to run on a lr308 or similar platform as well as the ability to run it on a 556 platform. Which i fully support. Would be a gem on a ak or lr platform.
more than big enough ;-;
$1245 😫
@joquin4618
Жыл бұрын
IKR 😞 Guess I’ll just have to stick with my humble & budget friendly YHM turbo k 😅
Why do I keep getting un-subbed 🤔
The rating is at 10,000 rounds if a person never cleans it. Clean it as recommended and it will outlast many other cans way beyond 10K.
So clean it with a ultrasonic cleaner and your fine
@HUXWRX
Жыл бұрын
Yes sir thats how we clean them!
Put it on a 20" M16A1 and it is ridiuclously quiet at the ear!
1:03 slightly above average
Hehe made the likes 556
It looks really rough
So this is the OSS Helix?
@silentReaper1220
Жыл бұрын
OSS changed their name to this stupid crap name hUxwRX so lame...
Fist!
So its $100 per Db reduction and it lasts 2 years (shooting 5k per year) and its LOUD. Ummm no thanks!
Stop showing me cans I keep having to buy!
I thought that was really loud compared to some of the others I've made homemade ones quieter than that
OSS was easier to spell
The build up ruins barrel harmonics! At first it dose not effect accuracy. As that carbon builds up you will see an accurate rifle start to shoot not so nice groupings.
Would you believe me if I told you that I have something better or equal.
Expensive. Takes a long time to get. If you pass atf scrutiny. No thanks. Oil can better
10,000rd life of can. That’s a big No for me.
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
Simple is always better, if it last's that short and can't be easily cleaned, it's a no for me.
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count. To clean it just soak it and then shoot it!
Very cool technology. But with a shorter service life, generally worse performance, higher level of maintenance, and a higher price tag…I’ll stick to my conventional cans. Printing - or sintering - is supposed to reduce overhead, reduce labor, and reduce cost, not increase it. One day I suppose.
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
@SOCMMOB
Жыл бұрын
@@HUXWRX well shit, that makes a difference. Good info @HUXWRX
Lol 10k life? I shoot more than that in a year..
@ZboeC5
Жыл бұрын
Then buy something else.
@lolaland5595
Жыл бұрын
wait for the cgs sci-six release happening in January
@HUXWRX
Жыл бұрын
The low round count is the FBI minimum requirements which include full auto, never cleaning, and a short barrel. It can go well past 10k and preform as well as our old cans when it comes round count.
@operatorsanonymous1741
Жыл бұрын
@@HUXWRX thanks for the clarification
Worst rebranding name in history. They should have fired their entire marketing team.
@ZboeC5
Жыл бұрын
Agreed, dumb name and nobody even cares. But it's their money so if they want to waste it they can.
Is there much difference between this suppressor and the OSS helix
@Odinforever2000
Жыл бұрын
Same type of supressor but it is made different
@HUXWRX
Жыл бұрын
Check Pew Science! There is a difference!