what a nice little saw! Just had the local Massey dealer drop a brand new one off at my house, 'because I don't charge enough' to weld for them for my side gig

The T540xp has plenty of torque! Great saw for trimming whether in the tree or on the ground. Thank you Tim, hearing that in the morning gets you up and going!

The tx540 would be a good saw for fire wood cutting tops up. Used to cut wood from logging tops and farmers clearing. Tops are all tangled up.

Nice one boss. I've been using my 550xp mkII daily. Favorite tool I own…

That climbing saw is freaking amazing. I just ordered the 550 but seeing that 540 make me want it also

540 is for 12 or 14 inch bar shown on official website, not for 16 inch. 2:11 You mentioned 16 inch bar, not sure if it is good or not.

Nice vid, I had 2 stihl 026 and loved them. Both run great until I fell a tree on one. The other still run great after 25 year of cutting firewood. Then I bought the new 261C M and expected it to bee as good as the other two. It was not. After 3 years of cutting firewood 261 broke down with crankshaftfailure. Stihl told me I was to blame not using the Stihl motomix oil. All these years I mix shell oil and gas 2%. That was not good enough for Stihl 261 Stihl told me. Not happy with Stihl 261 and Stihl-service anymore. No more Stihl for me....

I was gonna buy a couple used stihls and port them and do some performance work, after watching those little monsters I might just get those!

I just ordered the 550xp. I hope it's a great little saw.

Love my 550 mk2 and my 562xp. Just bought a set of those chaps your wearing. Another cool video, be safe.

Don't think I'd recommend doing a bore cut with a top handle saw. When they kick back they come back hard.

A super Husky chain saw demo-the 540 is very nice and compact-could be used one handed-Very powerful for its size.You like cutting slabs from the logs!Looks like fun-could be cool to smooth the thicker slabs with a belt sander!Nothing like cutting with a SHARP saw-so effortless either chain or circular.Band saws,too!Also the plunge cuts-you are working like the old Powermatic chain mortiser that was in Central High school shop-sadly it didn't workanymore-no bars or chains.The bars and chains came in the widths needed to cut the mortise-the chain was direct driven by a 3 hp 3 ph motor.So wanted to try that tool out-you cut the mortises yourself-no shop machine required!The mortise could go 6-8 in deep.

Always wanted a top handle saw for the dozer and four wheeler that 540 may be it.

The 'T 540 XP' is pretty powerful, I'll check one out!

Nice and cool here in Florence,Ms also had a D3k open cab to deliver this morning

I wear ear plugs too. cheap, more comfortable and they don't get knocked off!

Extremely enjoy the chainsaw videos, always have had a love for wood cutting

Good afternoon. So you have trails,plots,right of ways, around the house small jobs. Here you go.

Loving the noise and the video Tim..Take care

You’re like Zoro with that saw

Great job on the video. Love to watch you stress test the saws.

Hey CT! How long do you break your saws in for or would recommend breaking them in for? Man I just got my 550, 3 tanks through it. Screaming Demon is right!

Great video Tim 2 very nice saws be safe and have a blessed day!

Hi I'm considering a T540 that will only idle in a high RPM mode. Any idea what that might be? Guy says it needs to be programmed or put on a diagnostic machine.

Like your enthusiasm and love your video's

Earplugs are just better at isolating, and also are hugely more comfortable.

Watch out for that t540 .... bought one ... cut for one season lost compression

Good thing you have those EAR PLUGS around those Screaming Demons!!!😂😂

Great video Tim. Mean little saw. 👍👍👍

Hi there! I am blind and can't see what is cutting. I'm just wondering, is it cutting a log, or a tree?

I’m getting ready to buy. In your opinion would you spend the money on the new t540 or go battery with the 540i?

@cotontop3

9 ай бұрын

Go with the battery because so far all the gas 540’s have not been good. They just came out with the new version t540 and time will tell if it’s good or not

@darrengarlough5121

9 ай бұрын

@@cotontop3 ok thank you

That little saw kicks Ass!! Wow impressive

Great saw video Tim enjoyed watching

People that live and work in the south like ear plugs they are not nearly as hot as muffs and muffs don’t work as well with that style helmet .

@garywinters2282

4 жыл бұрын

And when it's hot muffs hold in the sweat!

I like that t540 that's a bad dude.you can do a lot more than what it looks like

What camera did you switch too?

Boy that looks like a handy saw nice nice Napa mike

Wow that little saw is super powerful WOW

Nice work! 👏

Looking better than the 201 Stihl

That t540 is a fast little joker, good video Tim, I'll be watching tonight on the live feed, keep up the great work and the videos. 💪🌲🌳🤙

Cutting cookies and breaking it in. Nice video sir!

What a saw great cutting skill !!!!

Like the video, But would love to see a video with a 25 inch bar on the T540 before Thanksgiving, because I'm looking to buy on Black Friday, either the MS 261 Pro (because I have seen the video with a 25" bar on the MS 261 Pro) and it looks like that 540 has the power to handle it, as I have a very bad back and it would help not to bend over as much... I know with the bigger bar you can't push it as hard and being as old as I am I will be much slower as well, 45 years ago I used to limb like you, but now I'm just slow and careful... Please put a 24 or 25 inch bar and post another video limbing and cutting... Thanks...

@brandongouge

2 жыл бұрын

Might as well throw on a .404 sprocket while you’re at it.

I own both of those saws. The 550xp was a trim saw. I had that saw for 3 yrs. Had to rebuild it twice. The 540xp is for the climber only

@cotontop3

5 жыл бұрын

Tell us why it’s for the climber only?

@deanparks4586

5 жыл бұрын

Guys just don't care about the saws. I have 16 saws and 3 to 4 saws in the shop getting fix Constantly

Zoro is to whip like Cotontop is to chainsaw

Nice little saw

So what was the camera? I've searched and can't find it.

@RockIslandguy

3 жыл бұрын

Tim? What camera bro

So huskvarna said that they won't warranty the saw would you be able to give some advice

@vcamthesawguy3813

5 жыл бұрын

Husqvarna had so many problems with the t 520 that most dealers won’t sell them, so they don’t have to deal with pissed off customers. That being said I believe that he is testing a newer version of the saw. Some of the problems have been worked out.

@vcamthesawguy3813

5 жыл бұрын

Correction T540.

Morning Mr, Tim.

We got a 550 and 562 and they rip

Good morning Tim and TDK logging.

I'm saving up for that T540... Can't wait

@cotontop3

4 жыл бұрын

Take a look at the battery 540 also, they are little beasts.

Salut!Nice video man!!!👍

Top panel saws are nice and light, but there is an extra bit of danger in that the operator is tempted, as you see here, to hold the wood/brush with one hand and cut with the other. This puts that holding hand in harms way. This is a real thing, And the lightness of the saw tempts the operator to wanna whip it around cutting small bits of brush instead of using a loppers, machete etc. You can see this effect in the video.

Great video Hows tater doing

cuffie antirumore

ear muffs are hot

American Must Tell 15 min. Befor they Dome something it‘s Bad But the Test are Good

Great video sir. Guys ,, anyone know what size bar he is running on the 550 xp ?? Thx all.

@cotontop3

3 жыл бұрын

20” bar.

@Sensei948

2 жыл бұрын

@@cotontop3 oil mix 1:33 ?

I think you should tell people to keep two hands on the saw. When they are ready to use it one handed that will be their descision.

@lewisrussell2783

3 жыл бұрын

Shutup

@livewithnick

3 жыл бұрын

I think what he tells people should be his decision. You come off as a giant hypocrite. 🤔

@livewithnick

3 жыл бұрын

So it should be their decision to use it one handed but it shouldn’t you want him to tell people to use it two handed? How about you mind your business and let everybody else mind theirs? You’re acting as if he’s taking that decision away from them lol. He never even said they had to use it one handed.

i want to see you doing that much of a hurry 13 hours a day

@corpsiecorpsie_the_original

4 жыл бұрын

Why?

I stick with my 365 special

Troppo lento

Get you self a stihl boy. Would love to see what a husky boy thinks of them. And im not saying husqvarna is not good. But when it comes to saws, nothing better then a stihl.

@daveyboy6985

2 жыл бұрын

Yeah yeah yeah😴

@JesseWright68

11 ай бұрын

Whatever, dude.

This is Not your Jop what you can do. Not good handle a chainsaw... sorry