Now wheel motor rebuild kits can be ordered here: c29d87.myshopify.com/en/collections/all

Great video, serious work and well done. Really helpful, thanks alot!

Excellente vidéo. Merci beaucoup.

Great tip on switching motor sides.

Great video, thanks very much!

Great Video, thanks a lot

Excellent information

perfect Video

This video is by far the best I've found for rebuilding the automower gearboxes. Thank you! I'm rebuild 6 motors now and just found one where the nylon gears have worn out their center holes (surprising since you said you rarely see that). Is it possible to buy the nylon gears alone?

@ouherizon

Жыл бұрын

Yes

@mazoman53560

Жыл бұрын

@@ouherizon - do you have part numbers? I know you sell them yourself but assume you are in Europe. I'm in the US. I'm hoping I could find a source nearby.

@ouherizon

Жыл бұрын

@@mazoman53560 Husqvarna does not sell any wheel motor parts separately (besides white o-ring). You can ask your local dealer for used ones though.

Great video!! I'm planning doing this during the winter. I have one question though: Instead of pushing the shaft further in, can't you just put in a distance washer behind the circlip or the bearing to remove the slack?

@ouherizon

10 ай бұрын

Yes, if the washer has the same thickness as the slack, but it can be difficult to find correct thickness washer to eliminate the slack entirely. Also, I would be cautious adding washer between the planetary gears carrier and bearing, since there will be less axial room gears to rotate in.

What are the characteristics of the engine? Couple. Power. Speed Thanks

I'm also curious what specific bearing puller you use - I'm having a difficult time getting my inner bearing puller to grip the bearing with the inner circlip in place and the narrow gap.

@ouherizon

Жыл бұрын

UNIOR 623089

Hi ive stripped my gearbox down and currently waiting for bearings to be delivered, im just wondering if you have any updates on the type of grease to use due to the plastic and metal gears used. I keep reading petroleum grease is not suitable for plastic and silicone isnt great for steel geats 🤔 By the way great video going to save me plenty of cash 😊

@ouherizon

6 ай бұрын

In this video description and inside the video is stated ADDINOL Multi-purpose Grease L 2 MO NLGI 2 as recommended gearbox grease. So far, it has not let any gearbox down. Petroleum based grease can damage only certain type of plastics, but it seems Husqvarna gearbox plastic gears can handle it.

Thanks so much for all the info! Sadly I saw this video to late, mixed up the gears and what way they should be mounted. Now have more tension in the gears then before. You think it's possible that they grind together after some time?

@ouherizon

10 ай бұрын

What causes tension (agitation) is grease itself. Adding grease in the gearbox will increase rolling resistance. In the video is presented, how much grease should be added and what type and viscosity it should be. Mixing up gears orientation will cause uneven wear within gears and premature gearbox failure.

Thanks so much for that video! Helped me a lot when I had a failing gearbox! Do you know if it is possible to buy the sungear separately?

@ouherizon

11 ай бұрын

I am not aware of its availability.

@ouherizon

9 ай бұрын

Now wheel motor rebuild kits can be ordered here: c29d87.myshopify.com/en/collections/all

Great Video, Do you know the specifications of the screws that hold the motor to the gear box? 14min 30sec in the video. I broke the head of one of these screws.

@ouherizon

Жыл бұрын

No, I do not know. They are standard screws, every hardware store should have them in stock.

4:32 What is the spec of those ph1 screws? I successfully fixed a motor thanks to this video, but I damaged one of those screws in the process. So I would like to be prepared in case I have to fix it again. Big thanks for the instructive video!

@ouherizon

Жыл бұрын

I don't know

@kimjansson1093

Жыл бұрын

@@ouherizon Ok

Excellent video. Its a really pity these parts cant be purchased

@ouherizon

Жыл бұрын

For Husqvarna it's business as always.

@ouherizon

9 ай бұрын

Now wheel motor rebuild kits can be ordered here: c29d87.myshopify.com/en/collections/all

@viggyuk

7 ай бұрын

Hi is it the same procedure on the 105 model wheel motors?

@ouherizon

6 ай бұрын

@@viggyuk Hi! I don't know.

Been servicing my own wonky wheel motors from my 450x following this vid, with great success. Unfortunately , a lot of damage was done by dog hair in the motors before I discovered the problem and there is now significant play on right hand motor. I have decided to invest in a new motor, but am I better doing both right and left motor together or is it ok to do one at a time, as reckon there is at least another season in the left hand one? Great vid once again.

@ouherizon

5 ай бұрын

You can replace one at the time, although some dealers may claim gear ratio is different, which is false.

Excellent, Thank you ! Local dealers (I am in France) do not (want to?) sell spare parts such as the plastic and metallic gear bearings, and they keep used motors for them. Can I buy these gearing directly from you ?

@ouherizon

Жыл бұрын

Yes, like I said in the video, Husqvarna does not want to sell wheel motor parts, just a new motor. Yes, I have used plastic and metallic planetary gears for sale (no sun gear though). For contact information visit this channel navigation tab "About", I do not post e-mail address here directly due to spam.

@ouherizon

9 ай бұрын

Now wheel motor rebuild kits can be ordered here: c29d87.myshopify.com/en/collections/all

Bonjour savez vous où on peut trouver les pièces détachées du moteur (les engrenages)

@ouherizon

15 күн бұрын

c29d87.myshopify.com/en/collections/all

Dove posso trovare i pezzi di ricambio grazie mille

@ouherizon

Ай бұрын

c29d87.myshopify.com/en/collections/all

Hello, What is the reference of the Gears? Thank you

@ouherizon

Жыл бұрын

I don't know.

Can anyone help me where to but part video start at 8:55. TNX

@ouherizon

2 ай бұрын

c29d87.myshopify.com/en/collections/all

23:16 I don't fully understand the effort. Thin washers with 0.1mm are available cheaply and you could adjust the play more precisely without any risk

@ouherizon

2 ай бұрын

I would be cautious adding washer between the planetary gears carrier and bearing, since there will be less axial room gears to rotate in.

@JunSi3010B

2 ай бұрын

@@ouherizon I'm not changing the position that was already possible. Only the axial play is eliminated. I used an 8x14x0.2mm washer. Alternatively, I could have used one with 13x19x0.2mm and placed it against the snap ring. My bearings were well worn out and had a lot of play. After 8000km they were still running smoothly. Unfortunately, the axle was partially reduced to 7.90mm. It's hard to get that fixed. Some dealers advertise new wheel motors from 2019/2020 with: "New bearing solution, improved grease solution, improved lubrication, harder gears, no more plastic" Is that really true? What exactly is different? PS: 23:06 Be careful! The bearings can be pressed slightly below the surface. Simply flat would not fit properly.

Kas kusagilt on võimalik leida varuosasid? Just see nö päikeseratas millel hambad kulunud?

@kenkenny4238

Жыл бұрын

No. Your best bet is to find second hand motors . I did and made one good motor.

@ouherizon

9 ай бұрын

Now wheel motor rebuild kits can be ordered here: c29d87.myshopify.com/en/collections/all