That really is the whole package now! Don't even know what to say... WOW!! Congratulations👍🏻 As others have mentioned, some good idle time may help it to find a happy place on the low jet. IE; cold start and allow to idle for a couple minutes, make a cut or two then idle for a solid minute or two. Just what I'm thinking🤷🏻♂️
@oakiewoodsman
Ай бұрын
This saw sure does look nice!
@redtiller1975Ай бұрын
Looks like a great runner with impressive gains. Good job Boedy
@aaronbadgett4439Ай бұрын
Looks super classy!!! Nice build brother!!!
@user-pc2vb8mn9eАй бұрын
Mye god bless you and your family this is me, Levi, your buddy from North Carolina my friend
@jimholz1102Ай бұрын
SMOKING HOT! Great job, tasteful black and grey.
@Matt-416
Ай бұрын
Tasteful? You do realize that Stihl chainsaws were primarily black and gray from 1928 until 1973? I refuse to dye mine those colors for that reason. Cool? Yes!!! But that's Stihl colors. Why not paint your Chevy engine Ford Blue? Husky has always been orange or orange/white.
@cajun3197Ай бұрын
Hell of a nice job!
@kingsawsАй бұрын
The color scheme is bad ass
@bigfootandbananaman4746Ай бұрын
Looks very nice
@FarmlessFarmer-xs1heАй бұрын
That thing just plain sings. And usually I’m more of a fan of stock looks but that looks really classy too
@dubbssawshopАй бұрын
She looks stout man!!!! 👍🏻 great work.
@oakiewoodsman
Ай бұрын
Agreed
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
😁
@johnbrad2143Ай бұрын
I have 2 of these stock use every day in hardwood and they both like to be primed before they want to start if they sit for a bit… I call them the 60cc saws that can
@user-fj2mi5rv6lАй бұрын
Really nice saw. I own two saws I want to port. The Husqvarna 662xp Mk II similar to this saw and the Stihl 461
@crazyfeller5704Ай бұрын
👍👍that’s a good looking saw.
@oakiewoodsman
Ай бұрын
Heck yes it is
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
Thought the same👍🆙CF!
@crazyfeller5704
Ай бұрын
Now I want to dye my poulan 2150 gray and black so it looks cool too…..😊
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@crazyfeller5704 😂🤐
@williamfgreene6855Ай бұрын
Very Nice!!!!
@garryaylward8050Ай бұрын
Ms 400 will show it a clean set heels any day
@thomaskapetantsis4951Ай бұрын
I think you should have a longer bar for that machine.
@tedneitzelАй бұрын
Damn she's fast! Very well done! Let it idle a little longer before you shut it off it should help set the carb right!
@MrHangerone
Ай бұрын
I wonder how it go ,run with a std 372xp carburettor just wondering 😊
@oakiewoodsman
Ай бұрын
Hello Ted. This saw look very nice
@tedneitzel
Ай бұрын
@@oakiewoodsman Hello sir and yes he did a excellent job on this one. My only thing with black is heat and using it in the blazing sun!
@oakiewoodsman
Ай бұрын
@@tedneitzel interesting
@user-pc2vb8mn9eАй бұрын
Tha saw is pear badass i really really really like it
@O-ChainsawsАй бұрын
My stock 562mk2 has the exakt same starting problem. It has 20hr runtime on it since feb, and i just got worse with the time and it ended up staling on idle. I got a new carb put on it on the garanti but i haven´t run it since.
@coolestguyontheplanet723Ай бұрын
Busy day today😅 Compliments from me today ☺️
@coreycorp7048Ай бұрын
Looks sick dyed black i love it , how do you keep the starter decal from getting dyed? Or does the dye not effect it? Runs awsome to there sure impresive saws .
@novicelumberjack
Ай бұрын
I removed the decal, sprayed the adhesive side with goo gone and removed all sticky stuff, then reapplied with spray adhesive after dying. The dye doesn't fully effect them, but it does darken them, and I didn't want that.
@coreycorp7048
Ай бұрын
Thanks for the info , i was wanting to dye a few of mine but didnt know about the decal part , some you caint find decals for now days.
@oakiewoodsman
Ай бұрын
@@coreycorp7048appreciate you asking this question. Never thought about it.
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@novicelumberjack 👊
@dgoodman1484Ай бұрын
Looks and sounds great! Gotta stop with the mark II vids though because every time I see one it pisses me off about the mark 1 I bought last Sept! 😁👍🏼👍🏼
@user-pc2vb8mn9eАй бұрын
So cool and beautiful and sharp looking one of the best chainsaws in the world better than sthil
@brandonsmith3447Ай бұрын
@boedy or anyone else that for sure knows. Would a MM on a 550 mk2 be pretty much the same as the sane thing done on the Deuce?
@mattfleming86Ай бұрын
Stick a 22" tsumura LW bar on there and you'd have an amazingly fast, handy, work saw.
@oakiewoodsman
Ай бұрын
Would be a great combo
@oakiewoodsmanАй бұрын
Runs strong!
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
👊
@aaronpowell4885
Ай бұрын
👍🏻OW and Doc
@oakiewoodsman
Ай бұрын
@@aaronpowell4885 hey buddy!
@oakiewoodsman
Ай бұрын
@@Doc-Cole_Trickle-of-Chainsaws what’s up DR
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@oakiewoodsman Nice day here
@lassila327 күн бұрын
😱😱😱👍🏼👍🏼👍🏼
@oldcodger1929Ай бұрын
So you'd rather have that then your 400.😊
@clarencetrice4442Ай бұрын
I 😮😮 would've repainted it I hope U know that black draws and holds heat the more compression saw saws have the hotter they run its what it is U don't want 2 be cooking chainsaws / chainsaws U like U should cherish U still can port chainsaws and have a mean chainsaw U want good RPM and pulling power so the saw cuts wood ASAP 😊😊 OMG 5 22 2O24
@Doc-Cole_Trickle-of-ChainsawsАй бұрын
👍🆙BigGuy
@oakiewoodsman
Ай бұрын
Looks nice
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@oakiewoodsman Yeah it does, looks really good!! Makes me think of a Decepticon from Transformers! Maybe an idea 4 a short vid introducing the world 2 Husq 562mkII/(insert Decepticon name here)!
@oakiewoodsman
Ай бұрын
@@Doc-Cole_Trickle-of-Chainsaws 😉
@ibbylancaster8981Ай бұрын
Do you have a video of the port job and what parts you used. I just bought one and would love to soup it up. I am a welder and fabricator and I already want to do a pipe but would love to port it. Much love from NC🤙🤙
@ibbylancaster8981
Ай бұрын
Nm, just saw that one part. Just really interested in getting into the porting. Have a great day 🤙
@EricChmelarsky-vh7eqАй бұрын
Impressive. So, 562 MK II or ms400. You've ported them both.
@novicelumberjack
Ай бұрын
I did not port the 400, that was done by Ethan Trainer. But... the 400 has given me and Ethan both all sorts of headaches. Just for that reason alone, I already prefer this Husqvarna. It is a well engineered product.
@EricChmelarsky-vh7eq
Ай бұрын
@novicelumberjack thanks for your input. Not happy with my 400 with 25" bar. Got the 562 Mk II. She will pull a 24 with some gusto. Thanks for covering the 562 MK II, extensively.
@adrianjackson4561Ай бұрын
@Novice Lumberjack what is the value in your opinion on a very slightly used 2172? Thanks if ya see this and get a chance to reply.
@novicelumberjack
Ай бұрын
For me... I see $$zero$$ value in a 2172. Because you can likely get a 2171 for the same price. Nothing exactly wrong with a 2172, but there is just sooo much RIGHT with the 2171.
@adrianjackson4561
Ай бұрын
@@novicelumberjackI just got done looking at the 2172 and it has never had gas or bar oil in it. I decided to pick it up 500$
@adrianjackson4561
Ай бұрын
Love what you did with the mk2 , I’m just about to watch ur video on the 400 hopefully that will be my next saw I’m gonna buy
@darrellpeak2914Ай бұрын
Your 562 is smoking! Well done. Run it against your 359 please?
@novicelumberjack
Ай бұрын
Any running it against other 60cc saws will be saved for the 60cc challenge in September.
@darrellpeak2914
Ай бұрын
@@novicelumberjack 👍 can’t wait
@sanjay019619 күн бұрын
Wait notch do bars now?
@richhoffman432Ай бұрын
What fuel/oil ratio you are running?
@aaronpowell4885
Ай бұрын
If I had to guess, Honda HP2 @ 40:1. Just a guess.
@eugenecunningham491Ай бұрын
There's only four saws That love is 590 /620echo the 572 husky 362 sthil they use on my tree Jobs poeple
@shakdidagalimalАй бұрын
Is it me those first two cuts seemed slow. Up to a minute 25. Gotta say that camera work going around it and above the log was impressive, more impressive than the cutting. ROFLMAO Must be the cup o java hahaha. If you port an autotune does it frag itself back down to normal... hmmmmm ....
@shakdidagalimal
Ай бұрын
Oops, just realized I'm on 1x speed not 2x speed like I always run. Okay, seems good. LOL
@novicelumberjack
Ай бұрын
😄 the reason the first two cuts are so slow is because I am holding up on the saw. That way it can spin more freely and tune itself.
@davidkrajnik6296Ай бұрын
Would you like to sell me that one?
@WitschorАй бұрын
So 562 Mk1 Mufflermod is useless and on 562Mk2 is recommend?
@HouseworksawsАй бұрын
They had to make the new 562 nice because the 5 series has just been an absolute disaster for them. Husqvarna slipped on quality control for a long time then the parts debacle really sucked. Glad to see them finally getting their $hit together. This is coming from a die hard Husq guy.
@63DegreesNorth
Ай бұрын
The 5 series has been a disaster for them? 😂 Get real man. The 5 series has been really great overall. They’ve had problems and they’ve worked them out over time. New tech always goes that way and that’s not brand specific.
@novicelumberjack
Ай бұрын
@63Degrees... let me introduce you to Matt House- one of the best. He knows what he is talking about, and I agree with him. The 5 series has been a total debacle. They have indeed made some great saws, but the failure rate is far too big and when they fail, it is disastrous. I just had a nearly brand new saw and it decided that the piston wanted to separate from the rest of the saw at peak rpm for no good reason. Yeah, they have had their problems.
@Houseworksaws
Ай бұрын
@@63DegreesNorth yup a disaster… I’ve been running Husqvarna for over 20 years for work saws and still do. I love the brand it’s my favorite saw. The company I work for has its own saw shop and the shear amount of bottom ends they’ve lost in the the 5 series is staggering. Especially the bad run of bearings they had in the 550/545. Look at how many revisions they’ve made in the 562 since 2012 whether it was carbs, cooling issues etc. Fallers getting maybe a season out of the 572 before the bearings fell apart. I have a 550mkii here on the bench that has maybe 20 hours on it before the FW bearing came apart. I finally broke down and bought a 400c and immediately sent it out for porting and that saw has been going hard for almost 3 years without a single issue. It’s been a phenomenal saw for me.
@63DegreesNorth
Ай бұрын
@@Houseworksaws That blows my mind, but I’ll eat humble pie and take you at your word and earned reputation Matt. I’ve been through the Mk1 and Mk2 550XP and 560XP’s, 576XP and now a 572XP, plus Mk2 and now Mk3 T540XP’s and recently added a 592XP to replace an ancient Solo 694. Never a moments trouble with any of them, but I’m not working them full-time and haven’t the ability to observe lots of units in use and how they stand up over time. Maybe I’m just one of the lucky ones I guess! I’ll keep my fingers crossed and hope for the best 😅
@63DegreesNorth
Ай бұрын
@@novicelumberjack I’m a dumb-ass. I didn’t twig that it was Matt House. I was wrong to dismiss it, as he sure knows what he’s writing about. Appreciate the course correction Boedy. Sorry for being an ass, Matt.
Пікірлер: 135
That really is the whole package now! Don't even know what to say... WOW!! Congratulations👍🏻 As others have mentioned, some good idle time may help it to find a happy place on the low jet. IE; cold start and allow to idle for a couple minutes, make a cut or two then idle for a solid minute or two. Just what I'm thinking🤷🏻♂️
@oakiewoodsman
Ай бұрын
This saw sure does look nice!
Looks like a great runner with impressive gains. Good job Boedy
Looks super classy!!! Nice build brother!!!
Mye god bless you and your family this is me, Levi, your buddy from North Carolina my friend
SMOKING HOT! Great job, tasteful black and grey.
@Matt-416
Ай бұрын
Tasteful? You do realize that Stihl chainsaws were primarily black and gray from 1928 until 1973? I refuse to dye mine those colors for that reason. Cool? Yes!!! But that's Stihl colors. Why not paint your Chevy engine Ford Blue? Husky has always been orange or orange/white.
Hell of a nice job!
The color scheme is bad ass
Looks very nice
That thing just plain sings. And usually I’m more of a fan of stock looks but that looks really classy too
She looks stout man!!!! 👍🏻 great work.
@oakiewoodsman
Ай бұрын
Agreed
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
😁
I have 2 of these stock use every day in hardwood and they both like to be primed before they want to start if they sit for a bit… I call them the 60cc saws that can
Really nice saw. I own two saws I want to port. The Husqvarna 662xp Mk II similar to this saw and the Stihl 461
👍👍that’s a good looking saw.
@oakiewoodsman
Ай бұрын
Heck yes it is
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
Thought the same👍🆙CF!
@crazyfeller5704
Ай бұрын
Now I want to dye my poulan 2150 gray and black so it looks cool too…..😊
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@crazyfeller5704 😂🤐
Very Nice!!!!
Ms 400 will show it a clean set heels any day
I think you should have a longer bar for that machine.
Damn she's fast! Very well done! Let it idle a little longer before you shut it off it should help set the carb right!
@MrHangerone
Ай бұрын
I wonder how it go ,run with a std 372xp carburettor just wondering 😊
@oakiewoodsman
Ай бұрын
Hello Ted. This saw look very nice
@tedneitzel
Ай бұрын
@@oakiewoodsman Hello sir and yes he did a excellent job on this one. My only thing with black is heat and using it in the blazing sun!
@oakiewoodsman
Ай бұрын
@@tedneitzel interesting
Tha saw is pear badass i really really really like it
My stock 562mk2 has the exakt same starting problem. It has 20hr runtime on it since feb, and i just got worse with the time and it ended up staling on idle. I got a new carb put on it on the garanti but i haven´t run it since.
Busy day today😅 Compliments from me today ☺️
Looks sick dyed black i love it , how do you keep the starter decal from getting dyed? Or does the dye not effect it? Runs awsome to there sure impresive saws .
@novicelumberjack
Ай бұрын
I removed the decal, sprayed the adhesive side with goo gone and removed all sticky stuff, then reapplied with spray adhesive after dying. The dye doesn't fully effect them, but it does darken them, and I didn't want that.
@coreycorp7048
Ай бұрын
Thanks for the info , i was wanting to dye a few of mine but didnt know about the decal part , some you caint find decals for now days.
@oakiewoodsman
Ай бұрын
@@coreycorp7048appreciate you asking this question. Never thought about it.
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@novicelumberjack 👊
Looks and sounds great! Gotta stop with the mark II vids though because every time I see one it pisses me off about the mark 1 I bought last Sept! 😁👍🏼👍🏼
So cool and beautiful and sharp looking one of the best chainsaws in the world better than sthil
@boedy or anyone else that for sure knows. Would a MM on a 550 mk2 be pretty much the same as the sane thing done on the Deuce?
Stick a 22" tsumura LW bar on there and you'd have an amazingly fast, handy, work saw.
@oakiewoodsman
Ай бұрын
Would be a great combo
Runs strong!
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
👊
@aaronpowell4885
Ай бұрын
👍🏻OW and Doc
@oakiewoodsman
Ай бұрын
@@aaronpowell4885 hey buddy!
@oakiewoodsman
Ай бұрын
@@Doc-Cole_Trickle-of-Chainsaws what’s up DR
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@oakiewoodsman Nice day here
😱😱😱👍🏼👍🏼👍🏼
So you'd rather have that then your 400.😊
I 😮😮 would've repainted it I hope U know that black draws and holds heat the more compression saw saws have the hotter they run its what it is U don't want 2 be cooking chainsaws / chainsaws U like U should cherish U still can port chainsaws and have a mean chainsaw U want good RPM and pulling power so the saw cuts wood ASAP 😊😊 OMG 5 22 2O24
👍🆙BigGuy
@oakiewoodsman
Ай бұрын
Looks nice
@Doc-Cole_Trickle-of-Chainsaws
Ай бұрын
@@oakiewoodsman Yeah it does, looks really good!! Makes me think of a Decepticon from Transformers! Maybe an idea 4 a short vid introducing the world 2 Husq 562mkII/(insert Decepticon name here)!
@oakiewoodsman
Ай бұрын
@@Doc-Cole_Trickle-of-Chainsaws 😉
Do you have a video of the port job and what parts you used. I just bought one and would love to soup it up. I am a welder and fabricator and I already want to do a pipe but would love to port it. Much love from NC🤙🤙
@ibbylancaster8981
Ай бұрын
Nm, just saw that one part. Just really interested in getting into the porting. Have a great day 🤙
Impressive. So, 562 MK II or ms400. You've ported them both.
@novicelumberjack
Ай бұрын
I did not port the 400, that was done by Ethan Trainer. But... the 400 has given me and Ethan both all sorts of headaches. Just for that reason alone, I already prefer this Husqvarna. It is a well engineered product.
@EricChmelarsky-vh7eq
Ай бұрын
@novicelumberjack thanks for your input. Not happy with my 400 with 25" bar. Got the 562 Mk II. She will pull a 24 with some gusto. Thanks for covering the 562 MK II, extensively.
@Novice Lumberjack what is the value in your opinion on a very slightly used 2172? Thanks if ya see this and get a chance to reply.
@novicelumberjack
Ай бұрын
For me... I see $$zero$$ value in a 2172. Because you can likely get a 2171 for the same price. Nothing exactly wrong with a 2172, but there is just sooo much RIGHT with the 2171.
@adrianjackson4561
Ай бұрын
@@novicelumberjackI just got done looking at the 2172 and it has never had gas or bar oil in it. I decided to pick it up 500$
@adrianjackson4561
Ай бұрын
Love what you did with the mk2 , I’m just about to watch ur video on the 400 hopefully that will be my next saw I’m gonna buy
Your 562 is smoking! Well done. Run it against your 359 please?
@novicelumberjack
Ай бұрын
Any running it against other 60cc saws will be saved for the 60cc challenge in September.
@darrellpeak2914
Ай бұрын
@@novicelumberjack 👍 can’t wait
Wait notch do bars now?
What fuel/oil ratio you are running?
@aaronpowell4885
Ай бұрын
If I had to guess, Honda HP2 @ 40:1. Just a guess.
There's only four saws That love is 590 /620echo the 572 husky 362 sthil they use on my tree Jobs poeple
Is it me those first two cuts seemed slow. Up to a minute 25. Gotta say that camera work going around it and above the log was impressive, more impressive than the cutting. ROFLMAO Must be the cup o java hahaha. If you port an autotune does it frag itself back down to normal... hmmmmm ....
@shakdidagalimal
Ай бұрын
Oops, just realized I'm on 1x speed not 2x speed like I always run. Okay, seems good. LOL
@novicelumberjack
Ай бұрын
😄 the reason the first two cuts are so slow is because I am holding up on the saw. That way it can spin more freely and tune itself.
Would you like to sell me that one?
So 562 Mk1 Mufflermod is useless and on 562Mk2 is recommend?
They had to make the new 562 nice because the 5 series has just been an absolute disaster for them. Husqvarna slipped on quality control for a long time then the parts debacle really sucked. Glad to see them finally getting their $hit together. This is coming from a die hard Husq guy.
@63DegreesNorth
Ай бұрын
The 5 series has been a disaster for them? 😂 Get real man. The 5 series has been really great overall. They’ve had problems and they’ve worked them out over time. New tech always goes that way and that’s not brand specific.
@novicelumberjack
Ай бұрын
@63Degrees... let me introduce you to Matt House- one of the best. He knows what he is talking about, and I agree with him. The 5 series has been a total debacle. They have indeed made some great saws, but the failure rate is far too big and when they fail, it is disastrous. I just had a nearly brand new saw and it decided that the piston wanted to separate from the rest of the saw at peak rpm for no good reason. Yeah, they have had their problems.
@Houseworksaws
Ай бұрын
@@63DegreesNorth yup a disaster… I’ve been running Husqvarna for over 20 years for work saws and still do. I love the brand it’s my favorite saw. The company I work for has its own saw shop and the shear amount of bottom ends they’ve lost in the the 5 series is staggering. Especially the bad run of bearings they had in the 550/545. Look at how many revisions they’ve made in the 562 since 2012 whether it was carbs, cooling issues etc. Fallers getting maybe a season out of the 572 before the bearings fell apart. I have a 550mkii here on the bench that has maybe 20 hours on it before the FW bearing came apart. I finally broke down and bought a 400c and immediately sent it out for porting and that saw has been going hard for almost 3 years without a single issue. It’s been a phenomenal saw for me.
@63DegreesNorth
Ай бұрын
@@Houseworksaws That blows my mind, but I’ll eat humble pie and take you at your word and earned reputation Matt. I’ve been through the Mk1 and Mk2 550XP and 560XP’s, 576XP and now a 572XP, plus Mk2 and now Mk3 T540XP’s and recently added a 592XP to replace an ancient Solo 694. Never a moments trouble with any of them, but I’m not working them full-time and haven’t the ability to observe lots of units in use and how they stand up over time. Maybe I’m just one of the lucky ones I guess! I’ll keep my fingers crossed and hope for the best 😅
@63DegreesNorth
Ай бұрын
@@novicelumberjack I’m a dumb-ass. I didn’t twig that it was Matt House. I was wrong to dismiss it, as he sure knows what he’s writing about. Appreciate the course correction Boedy. Sorry for being an ass, Matt.
The jackass formula.
first
Non mi sembra niente di speciale troppo tempo 😢