That cat was was listening to every thing you were talking about. The leadburn logger Scotland

THANKS FOR THE TIPS IRONHORSE I LOVE INFO KNOWLEDGE OF ALL THIS IS GREAT THANKS BUDDY LOOKING FORWARD TO ALL YOUR FUTURE BUILDS

I really appreciate all the info an stories. An doing that for our buddy Buckin is mighty nice. Im sure you always give us your best.. THX

Great Information There !!! Thank You For Your Videos !!!

Great video Harvey and love the meet and greet idea

Thank you for all the insight

Love ya man! Spring,Summer,Winter or Fall!!! I’m in South Eastern Pa... I’d definitely love to let the 6.0 stroke her way North! I’d bring a DirtBoyDave build up to cut a round. I’d love to just hang out and enjoy the stories and gain knowledge from older guys who have this passion too... and lot’s more years and knowledge than me. Camping out and eating some food..,listening to good folks make music and memories together in the woods...talking PowerSaw’s! Boy O’ Boy! Sipping my Iced Tea and doing lots of smiling... I wanna find another machine shop to knock down a 272 piston to play with in my aftermarket bigbore....! My Hutzl 372 has a Sugi 28” skipper on her...LOL! I saved so much on the China Saw I could afford a decent bar!!!LMFAO! I just love the way you are schooling us guys that want to learn everything we can about PowerSaw’s!!! 😁👍. Thank you,Sir!

thanks for video. lots of good tips thanks!

Great tips! Thanks 👍👍👍👍👍👍👍👍

Great vids you keep it real and explain things in pretty simple terms love the vids keep up the good work be well my friend

You know I'll be there Harvey!! Great video bud.

I’m excited to see some 61 action it’s gonna be awesome 👍

Hey what’s going on Harvey I don’t build saws I just love hanging out with ya hahaha have a great day...👍👍👍👍❤️❤️❤️❤️☮️

Thanks harv , great info

sorry im late iron horse i make sure i watch your vid right off the bat you and bucking keep up the great work

Harvey-stock 2020 ... music ; saws , dirt bikes and lotsa good eats !!! I should have the x27 head hafted to a hickory handle soon

New sub here Ironhorse🖐 Been watching Buckin and Killinger channels for a little while, and found my way here. Appreciate your explanation of how your building saws, your comment on another video if I remember correctly was to think of it as basically hot rodding a dirt bike helped me understand better. I've never done more than general maintenance type stuff and carb rebuilding on a saw, so thanks for sharing your knowledge👍Will be trying to catch up on some past videos and following new ones👌✌

@morgunfreedom4346

4 жыл бұрын

Welcome to the channel good sir! 👍

@robspruk2803

4 жыл бұрын

@Morgun Freedom - Thank ya very much friend, that's a great username ya have

@morgunfreedom4346

4 жыл бұрын

👍

great info thanks harv

sounds good Mr. Harvey I'm sure you will get a lot of responces

this video has great lighting wow

I live 3 hrs SE of you in pa. I'd be willing to take a drive. Love the channel. New sub.

I tell ya, I think their may be 2 people in this community that live near me. I'm about as far as I can get from you without getting in the Pacific ocean.. 😊👊👍Great video Harvey!!!!

Harvey love all the knowledge you share with us. It’s so worthy to get free knowledge keep on keeping on

Hello Harv from the Ireland crew, if decide on a date, I'll come over, Eoin P

Very cool mate

Hey Harvey, hows ol Dave holding up? Good stuff buddy, I’m learning a lot from you and your channel!!!

I would love to come hang out for a meet n greet at your farm. Your not that far from Maine lol. That would be very cool.

September 20th that's my birthday and it's going to be at decals again this year.. I heard pretty clothes is going to be in Michigan and then I heard that supposed to be in Indiana somebody has to make up my mind and I'm not going to come over your house for two days I'm going to stay there for like a week put my little army cot right next to that wood stove at night time I'm a Marine I seen heat I seen cold.lol. thanks for the videos mr. Harvey you're a hell of a man you give us more information than half the people out there from a Michigan boy over and out good day

@theironhorse6600

4 жыл бұрын

Buckinstock is very close to elkheart Indiana! And we’ll get you out here by the fire!

@timhart2652

4 жыл бұрын

You're going to have to adopt me, adopt a child.lol I tried calling you last week and on your voicemail was a lady laughing so I thought I had to the wrong number

Hey Harvey, not sure where your located but I'm from western Pa and would travel 3-4 hours in a heartbeat! Keep up the great content.

Sure that will be great I'll start saving my hilton points..The 394 big bore is going out for a run today.

Yes Sir , I would go . I live in N.E. Ohio . DO IT !

I'll be there, depending on schedule!

Hi Mr Harvey, I have been watching you for awhile now and this is my first post, but I would love to come up your way I live here in central PA and I could be there in about 2 hours. Someday I have a saw I would be honored to have you build for me!!!

Lol I love it

I’m all in for your doings. I would like to meet you in person.

I'm in for it.be an honor. I'm only hour away. Like to make It to buckinstock.b sure come c u Harvey.you 've done great with the channel.

@theironhorse6600

4 жыл бұрын

I WILL be there!

@timbarden4578

4 жыл бұрын

I'm gonna b there come hell or high water. I'm in millport ny.were used to high water.live on Catherine creek.ever want to trout fish look me up.

Harvey-stock sounds like fun, I think we're pretty close-ish. Would make the trip, life permitting...

Hey harvey id come 2 ur event absolutely would i live in knoxville tn i work for myself so time off isn't an issue just need the date to be ther. I appreciate what you do man. I really do.

Great video man always like to hear more info. i would try to to make it where do you live state i'm in MA but can't drive do to some heath stuff .

I'm from New York would be a good idea.

Intake side is the coolest side on a 2 stroke. usually why the pins are there.

I used to have arrows like that on my uniform when I worked for the government 😜

@bencauser

4 жыл бұрын

Me too Mikey 😉

Id be interested in Ironstock.

Hey Harvey...would love to come up...we are in Southern Missouri and it would be a haul but would shift things around to to come be a part of the Ironhorse saw-a-palooza and run some saws get square filling tips and watch the draft horses pull. Thanks great idea...would be glad to help in anyway I can

@codyschofield3686

4 жыл бұрын

Same down in Nixa mo

@davidray4772

4 жыл бұрын

@@codyschofield3686 what you do for a livin

@davidray4772

4 жыл бұрын

Im in willow springs

@codyschofield3686

4 жыл бұрын

David Ray I own professional small engine repair and work at Oakland lubrication on the side so I get all my oil at cost

@davidray4772

4 жыл бұрын

@@codyschofield3686 next time im in your area ill give you a shout and stop by and check out the shop

Hi Harv, I live in SE Pennsylvania. I’d really like to meet up and see your place. Timing is not always on my side having 2 young kids. We’ll see how it goes. Keep us informed.

I would love to take a ride up your way...l live about 2 hours from you and l also an old David Bradley chain saw that was in an old barn that was being tore down on a job that I was logging .....it was completely seized up from sitting for the last 30 40 years....l now have it freed up, cleaned up and about ready to start and it has very good compression .....l don't know anything about the carburetor on that saw .... I was wondering if you ever did anything with one .

Hey Harvey while you're making videos that calico cat is over there inspecting your work on the workbench.

I would be up for a meet up in NY.

Ironstock 2020!

@vtecpowersaw1577

4 жыл бұрын

Hahahahaha

Its 11.5hr from me 2 ur town id make that trip to get to meet u an talk to you absolutely.

Harvey, sent you an email on Sunday along the lines of getting together haven’t heard back. About 5 hours away would enjoy the drive.

@theironhorse6600

4 жыл бұрын

Kevin! I missed it! Please send another!

@kevinmaxam2414

4 жыл бұрын

Sent to you email.

hey Harvey can we get an update on the grabber family sometime please.

😊😊😊👍👍 cool

Great video. Gonna make it to Buckin stock, would love to come your way sometime. 👍✊

I think it would be great to have a get together

So could you use the 272 piston in the 372 without milling anything off the top of the piston and still be safe with squish? With or without a base gasket? Didnt understand that part. Love the tips and tricks Harvey!! Thank you for sharing with us

@theironhorse6600

4 жыл бұрын

Ya need to mill some off the 272 Piston!

@clintdoucette170

4 жыл бұрын

Thank you for the reply! Also was wondering what size pipe you used on your tube mufflers you built for the 372's if you cared to share

@theironhorse6600

4 жыл бұрын

I’m not sure! I’ll measure it and get back to you!

Hey Harvey. Do you remember me with my Partner 660? Could you explain, if it's possible to set up this big bore kit from husky 272 /372 for this partner chainsaw. All so I hope it fits. Thanks

Hello, I'm from Serbia. I have a question? What do you think about combining a Hyway big bore cylinder 372 with a Wiseco piston?

Sounds like fun let's make this happen !!!!!!!🌭🌭🌭🌭🌭🍔🍔🍔🍔

October

Ya upstate New York get together 👍👍👍👍👍

I would like to come up to your place. I'm in Pennsylvania

Hey Harvey would love to get together with you . Central Mass here so not to far a drive . Planning on making it to Bucking stock this year it’s already on the calendar ..

Meteor kit is good for 372xp ? is 1 ring.

👍

Is it possible to run a single ring on a double ring piston?? Like the lil red barn 50mm pop up double ring on a 371xp stock cylinder with gasket?? Or simply better to go with meteor with gasket delete??

@theironhorse6600

4 жыл бұрын

I haven’t had luck with the red barn stuff! I recommend the hyway brand the most! And you can run just the top ring!

What would happen if I take some off the roof of the intake port instead of the floor? Say 0.040” I’d get more intake duration but wouldn’t have it close too late so I’d get nice case pressure is my thinking..

@fabzacres-blackcat

4 жыл бұрын

Generally not a good idears

and how much for piston already done with rings from you bud

Great advice man, I'm working on my 385, exhuast opens at 96 intake opens at 103 and my blowdown is 36 putting my tranfer duration at 96. Seems low. My question is should I raise the transfers in this case? I'm thinking of 26 blowdown for a 116 transfer duration. What's your thoughts thanks.

@theironhorse6600

4 жыл бұрын

I would go to100 on exhaust and 120 on the transfers on that saw! It will have much more power!

@PoplarMechanic

4 жыл бұрын

@@theironhorse6600 ok thanks for the input, I would have to get the base machined. What I may do is put the meteor piston on the hiway cylinder and see where I'm at. Hopefully it's over 100. Thanks for your time man. I actually lean towards torque in my works saws.

@mercoldswfo

4 жыл бұрын

Poplar Mechanic 👋 👨‍🔧

@PoplarMechanic

4 жыл бұрын

@@mercoldswfo hey man I got my numbers sorted, I'm gonna try that meteor piston and see if it yields better numbers. Then once i get my exhuast and transfer figured i will bug harv for intake numbers lol

@mercoldswfo

4 жыл бұрын

Poplar Mechanic yeah exhaust makes sense to me. Intake and transfers are a guessing game for me yet

I could show off my new S-25DA hotsaw? ;)

Newer sub here. Where is Ironhorse located?

@theironhorse6600

4 жыл бұрын

Canisteo ny and I love the Adirondacks! Used to go to Indian lake every year! And welcome to the channel!

@SkogKniv

4 жыл бұрын

@@theironhorse6600 Ah glad to hear your up here with me. For some reason I thought you were ohio or indiana or something hahaha. If I can make it I would be game for a meet up. I have an axe meet at my place on March 28th. You are welcome.

@SkogKniv

4 жыл бұрын

@@theironhorse6600 I am in Ballston Lake by the way.

@mattjohnson687

4 жыл бұрын

@@theironhorse6600 do u still log?

Harv i live in newyork on the pa border matamoras would love to meat you.

hey ironhorse I'm fellow timber cutter from Murphy North Carolina. Can u put a stock 272 piston in a 372xpw without milling it down. thank ya bud b safe

@theironhorse6600

4 жыл бұрын

Nope! Gotta be milled!

@hammermorrow3902

4 жыл бұрын

@@theironhorse6600 OK to the same height as 372xpw

? Can any 2 ring piston,just run 1 ring.

@theironhorse6600

4 жыл бұрын

Yes! But I would only do it with a new cylinder! Top ring only! No Bottom!

What do you think of the Meteor Cylinders? Got one in my cart at Wolfcreek for my 272xp.

@Chevron.Muskoka

4 жыл бұрын

Meteor makes the closest to OEM as possible. Very consistent port timing and great plating and honing practices. Also come with Caber rings to begin with so consider that as an additional savings

@shawn1479

4 жыл бұрын

@@Chevron.Muskoka I mean my 272xp runs perfect. I am thinking about the swap because I think I would like it to have a decomp which it doesn't have right now.

@Chevron.Muskoka

4 жыл бұрын

That would be your best way into it. If I remember correctly meteor offers a kit complete with a new decomp valve

@shawn1479

4 жыл бұрын

@@Chevron.Muskoka Last question. Is it possible to port a cylinder without the saw it goes to being present or is that reckless?

@Chevron.Muskoka

4 жыл бұрын

In my opinion no. I do not do that, others may but that's a different market and program.

how would I go about getting in contact with you to discuss having some work done on saw or two (if you are interested)

@theironhorse6600

4 жыл бұрын

Ironhorsechainsaw@gmail.com

@iliketobuildstuff7013

4 жыл бұрын

Thanks

Im on the other side of the world and i feel like droping by

@theironhorse6600

4 жыл бұрын

Where are you at?

@vtecpowersaw1577

4 жыл бұрын

@@theironhorse6600 australia. .

@eriknelson6529

4 жыл бұрын

That's awesome! Hello vtec

@vtecpowersaw1577

4 жыл бұрын

Hi my name if anyone wondering is fazza

@eriknelson6529

4 жыл бұрын

Nice to meet you.

All i know is you live in new york but not where .i live in southern new Hampshire so maybee do able.

@eriknelson6529

4 жыл бұрын

Harvey is in canisteo NY. It's a haul from NH but certainly would be worth it.

@climbe4422

4 жыл бұрын

@@eriknelson6529 ok thanks erik .

1st😬❤️👍

@NickPixelTV

4 жыл бұрын

MIKEY YOYO it’s late lol

@mikeyyoyo6464

4 жыл бұрын

7am here Nick 😳

@NickPixelTV

4 жыл бұрын

MIKEY YOYO 2:15am here and got to be rolling at 7 love it. Cheers friend

@NickPixelTV

4 жыл бұрын

Journey North journey I love Alaska. I have some ham radio friends in anchorage. Cheers

@richardwaterreus4848

4 жыл бұрын

Thanks iron horse for your videos they very good and you are very good teacher thanks

what r you thinking the cat is on the bench lol ///A 272 with a bit of work be a good saw

@theironhorse6600

4 жыл бұрын

Yea! Those calicos are real good at research and development! HaHa!

@fabzacres-blackcat

4 жыл бұрын

Ironhorse Chainsaw that ain’t nothin Harvey ... me 2 black panthers can port and polish a cylinder for a can of tuna fish ! Amazing how they get their little paws in there and take care of business !

How far from N.C. are you?

@theironhorse6600

4 жыл бұрын

Im in canisteo ny! 6 hrs?

@benjia.outlawedchainsaws9165

4 жыл бұрын

@@theironhorse6600 oh ok awesome! That is almost half the time it would take me to get to Indiana lol which is love to be able to do

@benjia.outlawedchainsaws9165

4 жыл бұрын

I just looked, it's 10 1/2 hours away and Indiana is 11 1/2 lol but it would still be fun lol

@benjia.outlawedchainsaws9165

4 жыл бұрын

I got one more question for you if you don't mind me asking, what is ur thoughts on removing the bottom ring on a duel ring piston for a 372? Like what would happen?

Upstate ny we’re that’s we’re i am

@theironhorse6600

4 жыл бұрын

I’m in canisteo! Where are you?

@outragousbob4367

4 жыл бұрын

Ironhorse Chainsaw I might make a trip west to visit. I'm in NH. Course I'd bring the ATC 250r to scare everyone😜

@jasonhenderson9367

4 жыл бұрын

Catskill ny Harvey

ok mill to same height as 372xpw