This is a very useful video. I have an identical fan with lights. My lights stopped working 4 day’s ago, just couldn’t imagine what the problem was. I am a widow who had a husband who could fix anything and he did so I never had to call a repairman . I remembered my granddaughter commenting recently how you could go to you tube and find instructions for just about every repair. Glad I took her advice, now I’m waiting for one of my grandkids to follow your instructions and I get to keep my credit card in my wallet 😊. Thanks

The device you replaced is not a regulator, it is most likely what is known as a thermal fuse, thermal cutoff, or thermal cutoff fuse. This type of device will 'open' or 'break' the path of current to the lamps if the ambient temperature exceeds the rating of the thermal cutoff fuse. Typical opening temperature is 100C to 160C. Other ratings are possible. You can find these devices in many places such as ebay and/or amazon. Bypassing these (as shown in the video) will allow the lamps to function, however the thermal protection will be gone. Once the thermal fuse opens (due to high local temperature) the electrical path will not reclose when it cools. It only functions once, similar to a normal electrical fuse which also only functions once to provide protection. If it operates it has served its purpose by reacting to local overheating. It should be replaced to bring the overall system back to normal. Again, bypassing it means you move forward at your own risk. I've also seen these type devices in the under-dash heater blower assembly in cars. In this application it also provides protection from overheating for several of the fan speeds.

Very clear demonstration of what to do. Thank you! Initially I had trouble finding my limiter... it was buried within other wires. Quick and simple fix. One suggestion, before turning power off, and before cutting any wires, it's even easier if you unplug the "white connector" that attaches the entire "light housing" to the fan, once unplugged, the light housing is detached from any electricity and makes finding the limiter, cutting, and splicing wires easier. It's a simple plug. Thanks for sharing... wouldn't have done it without your guidance.

My Hunter Douglas ceiling fan light has been out for almost a year. I have been waiting for this person and that person to come through and take a look at it. I watched your video 3 times. Hit Home Depot and fixed the issue exactly how you described. You're the man!

@jimswenson6131

26 күн бұрын

Hunter Douglas does not make ceiling fans!

Thanks, I had to watch about 10 videos that didn’t help me at all before I came across yours. Professionally made and straight and accurate and to the point. Completed fixing mine within minutes of watching your video. Thanks again!

Thank you so much for this video! We’ve been living with a very dim living room in the evenings for over six months (because the fan lights stop working completely). I finally had enough and bought a new light kit. I actually watched this video to get an idea of what to expect when I installed the kit, but you taught me about this possible underlying issue. After installing the kit and trying every other fix my husband and I could think of (including buying a new light switch for the wall), I tried this. Boom! Let there be light!

I have had 3 of these go out and it was going to cost me close to $300 to replace them. I'm so glad I found this video before buying all new units. I will be trying this this weekend. Thank you!!

Great video! My wife has been begging me for months to get a new light assembly for our fan. I looked, but couldn't find one I liked and promptly forgot about it. She mentioned it again today (and dozens of times prior) and it got me looking. I was about to drop 80 bucks on one, then just thought I'd try to research to see if it was fixable. I watched your very clear video and 10 minutes later had a perfectly-working light. Thanks so much!

Thank you. Took no more than 30 minutes from flipping the breaker off to switching it back on.

Thanks so much for posting this. Huge help. Lights haven’t worked for 4 months and just didn’t want to mess with replacing the whole unit (it is only 5 years old). This works like a charm and super easy..(Tip for whoever sees this. You can disconnect the whole light piece from the fan with the little white quick disconnect.. easier to work with the wire splicing). Thanks again.

@EverydayHomeRepairs

3 жыл бұрын

Thx Chris 👍

This worked! My husband did something different with the parts inside, but the general advice was super helpful. Thank you!

Thanks for saving me the time to troubleshoot. For anyone who sees this, mine was slightly different. It was put together with wire nuts, so I didn't have to cut or strip wires...just removed nuts and component. Then used one of the nuts to bring the two power wires together. Also, I used the disconnect connector shown there to remove the light piece and work on a table.

@EverydayHomeRepairs

3 жыл бұрын

Thanks for the feedback!

@Milhouse77BS

10 ай бұрын

That worked for me also thanks

Thank you for taking the time to do this! I had a hunch it was a regulator of sorts, just like they do with our water. I did it without having to cut any wires or turn off any breakers. I disconnected the unit and then disconnected the regulator and was able to reconnect the wires by simply plugging them into each other. (Hope that makes sense) THANKS AGAIN!!!

@AnkitSavani

2 жыл бұрын

This works thanks

@elwoodwhitaker7416

2 жыл бұрын

So was I. Thanks for adding this. I was just about to cut my wires.

Thank you so much for your time you took posting this! It worked perfect. Hope you are getting blessed from your efforts as much as it appears other people are. This is what i Love about the KZread community. Thanks again, Scott!!

@EverydayHomeRepairs

4 жыл бұрын

Hey Trace, thanks for the kind words. I agree with the growth of KZread it is super handy to be able to go out and find just about any topic covered by a video addressing the same problem / project. Great way to save time and money around the house.

Thank you so much, I troubleshooted everything and was left baffled. After finding this culprit, I was able to bypass it to verify it was indeed the regulator. Much respect for saving me a trip to Lowes!

This fix worked for me, thank you! Saved $100+ on a new ceiling fan, and took about 15 minutes to repair. My limiter looked just like yours.

I also have this 3-bulb assembly and I have a few notes: 1. The current indicator 'pen' was detecting current when there were no bulbs, but stopped reading when there were any bulbs installed. 2. Disconnecting the large harness connector makes this job a lot easier since you can take the entire assembly off and work on it on a table. 3. The infamous voltage regulator was well hidden inside a jumble cables where the cables start. I had to cut off a ziptie to get to it. 4. I carefully scraped each bulb socket with a small file so that the center contacts of the sockets were shiny. Years of poor contact (light flickering) had created some type of buildup that would make the bulb center contacts pretty bad so there's a chance it would not have worked even after removing the regulator. Good luck! The fix worked for me!

@louiscalderon

2 жыл бұрын

I have the same model but I removed the regulator and it didn’t work. My issue I believe is the pull chain, you can’t even hear it click. But I believe you have to replace the whole assembly. Do you have the model number by chance?

Thanks so much. This fixed the problem. I have a Hunter ceiling fan similar to the one you show and it just all of a sudden stopped working. Took me about 15 mins to make the repair while hubby was picking up lunch. He still hasn't noticed LOL! Thanks so much for this, saved me lots of $$$!

@EverydayHomeRepairs

4 жыл бұрын

Nice Beth! Way to get after it.

Wow I’m so glad I found your video. I was completely stumped! I replaced the complete light fixture and it still didn’t work. You made my day. Thanks again.

@EverydayHomeRepairs

4 жыл бұрын

Awesome Jacob, glad the video helped.

@bklynpc

3 жыл бұрын

@@EverydayHomeRepairs Same for me! I spent $50 to replace the light kit & it ended up being this little do-dad.Thanks so much!

Just removed mine and my lights work again. I had the same problem with the last Hunter fan but didn't know any better so I bought a new one. Thanks for making this video.

@EverydayHomeRepairs

4 жыл бұрын

No problem JD, glad you were able to get it working and saved some money💰

Awesome video and saved me replacing the fan because Hunter no longer makes the light kit for the model of my ceiling fan. Agree with others in this thread that you don't have to cut any wires. Simply disconnect the regulator at the two plugs, remove the regulator, and then snap the open plugs together and voila!

If you plan to install this part again I would cut the wires on the failed part instead of cutting the wires on the part that the new part will plug into again. It will make it much easier when going back together 😊

@doughuff1896

3 жыл бұрын

yah, I was cringing when he cut those connectors off when he could have just cut the part out and spliced it there.

@johncontos5499

2 жыл бұрын

I found that there is no need to cut the wires at all. But merely remove the pink assembly and put the black and the blue together. They snap right in.

Thank you so much! I live alone and have the exact Hunter fan, you are awesome for posting this, I will fix myself.

@EverydayHomeRepairs

4 жыл бұрын

Thanks Estela, best of luck on the repair and let me know if you have any questions.

Thanks for this! Perfect fix for my fan. Apparently the limiter is only there to prevent the user from putting in lights of too high a wattage (an efficiency measure, not a safety measure) so as long as you don't go nuts you shouldn't experience any decreased life from your bulbs after pulling it.

@EverydayHomeRepairs

4 жыл бұрын

Hey Joe, thanks for the additional info!

@TheDjearl08

4 жыл бұрын

Thanks for this info. I can rest easier now :)

Watching this fixed my fan quick! Thanks!

I appreciate the video a lot. Saved me a lot of time on Christmas eve of all days. My fan was a bit different as well. My connections were different I was able to just remove the regulator and hook the single pin connectors up without using a wire nut.

Hey I just encountered this situation this week and was racking my brain on the fix, and seeing this video really help me and saved money.. thanks alot!!

@EverydayHomeRepairs

4 жыл бұрын

Here to help 👍

I believe that I have the same problem as you demonstrated with your ceiling fan. I'm going to do the same fix as you did. Thanks so much for your expertise and experience.

Thank you for the video. I was able to remove the limiter and bypassed it altogether. The light hasn't worked since we bought the house 2 years ago. I had no idea it was this easy but never had a reason to look into it until recently.

Just did this today. Was about to give up and buy a new fan and this was the last video we watched! Thanks for the video!

@EverydayHomeRepairs

3 жыл бұрын

Glad I could help 👍. Always nice when the fix is easier than expected.

I was able to bypass mine without having to splice - the connectors still align. Also this worked! Thanks for the tip!

Thank you with your help I was able to confidently address the same issue you were having with your light fixture!

Fixed my lights! Didn't even have to shut off power. Unclipped the pink regulator and the black clipped to the blue like a charm!

@EverydayHomeRepairs

4 жыл бұрын

Got to love when the repairs go faster than expected 👍.

Thank you for this video. This is exact issue I was having. I would take tester and always showed power of wire but didn’t ever know this was a issues to look at. I almost gave up and completely replaced fan. I did almost miss the component because of how small it was. Thanks

Dude, I was just about to run out and buy another ceiling fan. I assumed that it was a component that went bad, since my wife told me she heard a pop when she flipped the switch. Anyways, I was looking them over and decided, "well, it's not worth attempting to order/replace parts. As luck would have it, we had something come up this morning and couldn't go out when we wanted to look for another fan. In the meantime, I started wondering if anyone else might have had this problem before and made note of it on KZread. Found your video in like 5 seconds. It took me all of a 5 minutes to remove the part. Mine was already installed with two wire nuts bridging the two wires. I just removed the component and connected the wires and we're back in business. Thanks a bunch for the video - was most helpful and saved me a $150 or so.

Scott, THANK YOU. Worked for me, took about 30 minutes ! And no money spent.

@EverydayHomeRepairs

3 жыл бұрын

Those are the best type of repairs 🤑

Perfect fix! Took me a minute to find the piece. It was tucked away into the fan switch wires. Thank you for the info.

@EverydayHomeRepairs

3 жыл бұрын

Glad it helped

Worked perfectly, thank you.

Worked perfectly. Thanks for the tip

I was convinced I would have to buy a new ceiling fan. This worked perfectly thank you sooooo much!!!

@EverydayHomeRepairs

4 жыл бұрын

Happy to Help 👊

Thanks Scott I appreciate you sharing. I tried just splicing in a new on off chain and it didn't work. So I am going to try taking out that rectangular box and go from there thank you! Appreciate it

Thanks. I was about to replace the switch before watching this. 10 minutes and done!

@EverydayHomeRepairs

4 жыл бұрын

💥 👍

Hey man...first off thanks for the video... Second off for me the two quick disconnects were male and female so I was able to just connect the wires together that way. There was no need in cutting them off and stripping them and using a wire nutt.

Worked out well, thanks a bunch! Different model that has two black wires connected with the pink wire of the regulator with wire nuts. I removed pink wire connecting the regulator/limiter to the two black wires. Connected the black wires directly and it worked! Only had to cut the zip tie holding the wires together and nothing else. Even easier on my Hunter model! Great video, thanks again!

@EverydayHomeRepairs

3 жыл бұрын

Hey Adam, got to love the easy fixes, thanks for sharing. 👍

Thank you for sharing this solution. The regulator was the issue but I was able to get the fan lights working again using a slightly differently route. After disconnecting the pink regulator, I connected the blue and black wires together using their quick connects. They are male/female so they fit right together. I didn't remove the quick connects on the blue and black wires, strip them then tie them back together using a wire nut.

@EverydayHomeRepairs

4 жыл бұрын

Hey Denise, even easier 👍

Thanks! My problem was basically the same, though the limiter box was much bigger (PL-190C). Quick note: without any light bulbs plugged in everything appeared to work correctly using the voltage tester, the limiter only started blocking voltage with a bulb in the socket.

Worked for me, thank you! Similar to others, my regulator was connected with wire nuts on each end, so it was easy to just to remove it and connect the two hot wires. Working like a charm.

I have the same fan with the same problem. I was able to just use the quick disconnects and plug those together and didn't need to strip any wires. So it's a quick fix and no parts needed and only need a screw driver to get the housing off. That's it. I put in LED bulbs too to make sure I don't use too much power. But they work great now. Thanks for your video.

@EverydayHomeRepairs

3 жыл бұрын

Doesn't get much easier 👍

Great video and was the exact fix I needed. Another suggestion (if made previously, I apologize ... I didn't read through all the comments) ... instead of cutting and splicing, you can just disconnect the pink wire at 2 easy connection points and then plug the black wire into the blue wire. Plastic easy connections fit perfectly! Agree with one previous comment (Jd Cisz), if you unplug the large white connector "box", the removal of the light housing makes the fix even easier. Thanks to all involved in helping this non-handyman actually fix something for once!

@pgiolo

2 жыл бұрын

Thanks for this additional tip about not having to cur and splice anything. I did what you described and it worked perfectly. I'm curious if anybody who bypassed the pink wire ("regulator") ever ordered a replacement one and re-installed it...

@Gooseneck41

11 ай бұрын

I did that too. Seems to be working fine.

@vincenavarra6644

5 ай бұрын

I just did this to my fan and it fixed the problem. I also wonder if you can get a replacement "regulator" and if you don't replace it what kind of problem may occur?

Thank you sir! December 5 2022 my Hunter light assembly stopped working! Exactly as you showed us in the video! Quick fix! Appreciate it very much. Happy Holidays!

Thanks for the great video! Your Hunter fan was the exact model of mine and so made it very easy. i watched other videos not nearly as straightforward and easy. One guys hands covered every thing he was doing...at least you know how to use a camera. Thanks again!

I did exactly what you did sir and it worked,thanks for the help and video and keep going with theses kind of help for house improvements!!!

This happened to our fan this morning! Easy few minute fix. Thanks!

@EverydayHomeRepairs

3 жыл бұрын

Happy to help!

This video saved the day and got the lights working again on my Hunter Type 2 Model ceiling fan. Parts for my model apparently discontinued.

Thank you so much for this video, it was spot on and simple.

@EverydayHomeRepairs

3 жыл бұрын

🙌

Another thanks! Glad I found your video. Taking that piece out fixed my problem immediately.

This worked thank you. I just cut off the wires on the regulator part and spliced them together and disconnected from the middle connector so not to use the breaker. But safety first so use best judgement.

Just wanted to say thanks for the video, watched it went right to it...took me less than 5 minutes and the light came back on.....sheeeesh that was 👌

Same here. Fixed in 10 minutes. Thanks for the instructions!

@EverydayHomeRepairs

3 жыл бұрын

👊

Great easy video thank you very much. The nice thing about my hunter fan was there was a wire nut already connected to that regulator regulator so I didn't need to Come back down the ladder and find a wire nut. Thanks again

You fixed my fan and problem! Thank you so much!

My hunter light is brand new but this is a fairly easy fix from what it appears. Have reached out to hunter to see if they can help first. Thanks for the tip

The piece is a limiter. Mine was Y59 R 130C. This was a good hack. Saved me 50.00 for a new light kit versus 10.00 for the limiter, if I decide to replace it. Did anyone have issues with lights burning out quicker? I still use incandescent, even though they are hard to find. Good job sir.

Awesome video, same fan and same solution. Quick tip, disconnect the main connection from fan so you can cut and strip wires on a table or something easier to work with. Rather than working over head the whole time.

Thanks for the video. Matched my fan exactly and made it an easy fix.

Thanks buddy. Fixed it myself because of your video. I was about to buy a new light kit

@EverydayHomeRepairs

4 жыл бұрын

Nice, saving time and money is the name of the game 👍

Perfectly solved my problem. Thanks!!!

@EverydayHomeRepairs

4 жыл бұрын

Boom 💥! Your are welcome.

Hello! Thank you, it helped me fix my light problem on my ceiling fan. I was just wondering if you ended up ordering the limiter or is your fan is still up and running?

If all the lights on your hunter fan abruptly stopped working even though everything else is fine, watch this video and you can fix it in 15 minutes for free! Thanks for the vid, brotha!!!

Great video thanks, very helpful. So a tip on top....on mine anyway, no need to cut and splice, the existing connectors will connect to each other. (one is female and the other male) remove the regulator doo-hickey and connect the two leads together.

Thank You Scott, fixed my problem in minutes

@EverydayHomeRepairs

3 жыл бұрын

Glad it helped 👍

This tip fixed the light kit to my fan, thanks.

@EverydayHomeRepairs

3 жыл бұрын

You're welcome!

Thank you! fast and easy fix!

This worked for me, thank you! I just moved into a place and three of the ceiling fans had no operable lights.

Thanks Scott! I have that exact fan and longer can get parts. Same problem and fixed it with your guidance. Works again and thanks. Should I replace that part anyway?

@EverydayHomeRepairs

4 жыл бұрын

Hey Ron, it has been about 6 months and I never did get the replacement part. If you keep burning out light bulbs then you will probably want to get the part if bulbs aren’t burning out you should be fine.

Thanks! Cost free, easy and best of all worked. Let there be light!

Thank you so much!!! This worked for me too

THANK YOU!!! This totally fixed it :)

@EverydayHomeRepairs

4 жыл бұрын

Nice! 👊

THANK YOU!!! Fixed! I was getting tired of getting dressed in the dark! LOL!

@doughuff1896

3 жыл бұрын

lol Im using the bathroom, closet and hall lights to get enough light in my room to see at night doh..

Hello,thanks for this video and showing this regulator... i bought this house a few years ago that has 5 hunter fans... they seem great but the ones in bed room and living room the ligts stopped just like what you showed.. bulbs are good even tried new ones... chain switch feels the same as the fans that are working perfectly... Is the regulator common in regular hunter fans??? my guess is these are 2013 models...also is it better to just get these parts or just eliminate it??? thanks again

Thank you! You helped us fix the light problem with our Hunter fan. Easy fix, with no cost involved.

Thank you so much. I was about to replace the light kit plus it was worrying me to death.

@EverydayHomeRepairs

3 жыл бұрын

Happy to help Deania! 👍

Thank you so much for showing us how to fix my fan! I'm just so happy❤❤❤

This worked for me without having to strip the connectors off the ends of the blue and black wires. I just removed the regulator, and then connected them directly together since they "clicked" right into place. But let me know if there's a reason for stripping them off. In any case, thanks! This was great.

THANK YOU!!! This was so helpful and saved us time and $$$

I saw this video telling me to cut out the tiny white box (limiter) and a couple other videos with different instructions, telling me to alter the black box. As far as I could tell, the wires going down to the light didn’t actually go to the black box. The only thing in between the light and the wires coming through the ceiling was the little white box shown in this video. So I cut it out and put the two wires back together. Like magic the light worked again. So I’m glad I followed the instructions in this video. Thanks for the help!

@EverydayHomeRepairs

4 жыл бұрын

No problem, glad the fix worked for you as well.

Thank you very much for sharing this fix. It worked perfectly

Thanks, worked great for me too and connectors worked without cutting.

Thanks for the video. Quick question: any reason to not just disconnect the entire light kit at the white plastic harness connector? That should help avoid the need to turn off the breaker, plus allow you to put it on a table, making it easier to work with.

@EverydayHomeRepairs

3 жыл бұрын

No, I think that is a great idea. Best of luck! 👍

Thank you for saving my Saturday!

This probably saved me hours. Thank you !

Hi scott,... thanks for the video. My question is,... why didnt you just plug the connectors into each other, rather than cutting,.. and wire nutting the two bare ends>? espically if you replaced the limiter device you removed to get the job done>?

Quick and easy fix. Great video.

@EverydayHomeRepairs

4 жыл бұрын

Thanks Tarek, glad the fix worked for you!

Fixed our fan! Thanks so much for this video!

This worked perfectly thanks 👍

@EverydayHomeRepairs

4 жыл бұрын

No Problem Chris 👍

Fixed! Thanks so much 👍🏻

@EverydayHomeRepairs

4 жыл бұрын

💥 👊

Thank you. Great video and my light is back on! Your video save me a lot of time and money.

Awesome tutorial brah. Worked perfect. Thank you.

Perfect solution that worked!! I have been unable to find any place to order a replacement regulator. Suggestions?

@bombecanon479

Ай бұрын

You can get a universal or generic one at Home Depot

A temperature switch basically a fuse. Thank you for your video it helped me a lot