Make sure to checkout my instagram to see behind the scenes: 2_vintage_ Go buy some spray used in this video here: www.industrysupplyinc.com/ My Second Channel: kzread.info/dash/bejne/hoR5ycyanae-Z9Y.html Thanks to everyone who watches and supports the channel!

@jordansbikes819

4 жыл бұрын

How much you selling it for?

@jordansbikes819

4 жыл бұрын

How much you selling the breeze for

@isaacblagden3510

4 жыл бұрын

y do u use ur heat gun so much like jesus christ u love he heat gun more than ur gf

@2vintage

4 жыл бұрын

@@isaacblagden3510 lol

The Breeze, perfect gift for Jade to start out on!

Looking good. Don’t forget you can get those white creases out of the front fender with your heat gun. Just start slow and get a feel for it. Gotta get yourself a heater or something in there. Working in the cold sucks.

The Breeze looks heaps better than it did. Good job Joe this thing will be alot of fun when it's all done

I understand he might be tight for time but I dont get why he cant just give the rust some sand paper, because the metal will continue to erode

Great video man good to see the old Yamaha back to life I love little 125 four-wheelers. content idea for you. you should try to find either the Honda TRX 125 or the Suzuki 125 4-wheeler and race them against the breeze 125 and see what one's faster... if not keep doing these types of videos Man bringing old machines back to life is the best so fulfilling when they're back running... and also you should use slime to see if you can fix the tires I put it in every one of my ATV tires

Joe: I just want to say, "You make the past come alive." I so enjoy your videos. You work so hard , even in so a cold climate. lol. I left New York years ago to get away from the cold. The machine sounds great. What are you gonna sell her for? Someone will scoop it up real quick.

Great vid,but in future i would remove as much rust as possible before repainting it.It will just come back throught the paint.

Check the valve stems by spraying soapy water. Also those are usually tubeless. I use tire plug kit like you would use on car tires. Works great for tubeless tires.

Seafoam it, restore/replace the seat, acid clean/paint some more rusted areas inc. wheels, and that thing is a gem!

Glad using water worked for you, also definitely go with some tubes. Loving the videos!!!

Yet another great vid👍🏻 I think it would be cool if you got a old 80s bike and revived it!

So lucky that you always have something to do I’m Jealous if I had land all I would Ride dirt bikes all day

Another great video mate

Nice video:) You did good with the little Yamaha quad👍

Get a 400ex for next project

Picking up my first banshee tomorrow for $550 with extra rims with paddles on them just need to order a top end kit

@everythingloud4068

4 жыл бұрын

@Game Bred Duramax I am ordering a bottom end too I plan on totally restoring the whole quad but that's over around 2500 so it wont be all at once

@everythingloud4068

4 жыл бұрын

@Game Bred Duramax I cant wait to see how it does compared to my 2019 raptor 700r I will make a video on how it does

Get a 400ex for your next project

@willbrown4600

4 жыл бұрын

You had the same idea that I was going to say

Cool video man lol also we got more snow here than you guys

You're lucky dude finding all these cheap ATVs iam down in NC and they would want 500 or 600 bucks for something like that

@LeperxMessiah

4 жыл бұрын

Same in upstate NY

@IllestA4

4 жыл бұрын

There are most likely atv buy and sell pages on Facebook around where you all live

@tacticalidiot175

3 жыл бұрын

south jersey, $5,000 minimum

It does not take long to take the wheels off let the tyre down use a deck of cards to slide between tyre and rim and paint both sides of the wheels please lol I'm a mechanic and I race motocross my whole life I watch your videos your good at what you do but take the extra time it's worth it in the end

@OldestYoungenInGuidePost

4 жыл бұрын

Philip Eastwood It's ALL in the preparation 😏

Good work bro

If you have any extra breathable foam laying around you could make your own air filter till you buy one to prevent any more trash from getting inside. I'm sure its had plenty of trash getting sucked in over time so any thing would help

I like the long videos

You have any idea what all the plastic and seat weigh trying to figure out shipping prices

Has anyone else called that number above the word breeze at 3:01 😂

@coongang624

4 жыл бұрын

Thought about it lol

Wish i had a atv or a bike but love your vids ❤️

You can get the plastics good as New with 400 grit sandpaper and then carefully heating with the heat gun. Same amount of work and at lower costs

Do you still have the rear rack for the Yamaha breeze?

I noticed you never adjust the valves on any of your projects. It can make a huge difference. you might want to learn how to do that

@IllestA4

4 жыл бұрын

Jeff Ferguson he says he’s done many times but not once in a video lol

You can make the plastic like new just with the heat gun

What paint did u use for the rims

You guys live the life that I want. Say hi to Charl- dog for me

Bro I can’t watch your videos when u paint. my ocd goes nuts with all that overspray

Looks better, I use leather glose cleaner or plastic trim cleaner on my plastics it does a good job ever time, good video

You should try using those pads and red ripper!

I do believe you put the fuel filter on backwards, the cap should face the carburetor... But I may be wrong

@2vintage

4 жыл бұрын

Nope arrow is pointing down. It's the correct way.

i dont need tire shine for my tires becase there always in the mud!!!!!!!

I LOVE HOW ITS ALWAYS cold in wisconsin but he has the garage door opened but at the apartment its always closed

Hey what size is that new battery and where did u find it

@mudmowerregulators9559

4 жыл бұрын

You can get them for 20 bucks on ebay with free shipping

its a breeze with red ripper

Do a video on the three wheeler I want to see it running

You should find a cheaper Yz 250 and do a rebuild on it. Videos have been good, I like them!

Add slime to the tire and over pressure it and ride it for a while then let air down to the right pressure and it should stay up.

Check out David Powell Yamaha breeze

🔥🔥

Find a 87-88-91-92 Honda trx250x they are a blast and quick for what they are probably pick one up pretty cheap

For a video idea you should try to find the oldest bike possible and revive it

I like to play 'Good to Go' bingo while watching these videos, just 3 times in this episode so Im slightly disappointed. I also miss the hand crank compression tests with these electric start models.

Show us a closer view of the front fenders... One of them looks white..

@bruddaozzo

4 жыл бұрын

Yeah I noticed he avoided showing the front.

next time take a grinder an grind slit in them bolt then use a flathead screwdriver good videos keep up the good work

You need to get a Raptor 660 on the sometime

Atc 250r, 350x or Trx 250r 👌🤙

What will be your next project?

yeah because shinny tires are very important to mechanical operation...

Just wet sand it and them take the heat gun to the plastics to restore them

I myself have a Yamaha breeze

I have a yahama breeze

Next build should be a destroyed bike

Tire shine on flat tire lmao breez looks better tho

You don't put a tube in a tubeless tire.

@nickbarnum2450

4 жыл бұрын

Unless it has a hole

trading my ssr125 for a clean 01 blaster 200

👍👍👍😁

Hot air makes stickers stick better the cold makes the sticky stuff easier to remove I know you love your heat gun but just facts lol

@lowe1677

4 жыл бұрын

It works both ways depending on how hot it is.Heat makes it alot easier to remove a decal.Cold makes it brittle and cracks,making it harder to remove.

ORING

Get a seat cover

this video needs more minty Jade

bro spray painting the rims don't make it new

You weren't just using water and sos pads water don't foam then you spray it. You lie to much bro.I catch many lies almost every video. And at least sand stuff before you paint it.

@2vintage

4 жыл бұрын

Yeah I.was using water and dawn soap

Second

Thank god for ditching the hunt rack

First