Thanks good video. I have bad sound in my motor too when I go upphill so I think I take it apart and do a service with greas (with the right one). You can notice that you know when there is a service to be done because the motor is not that strong anymore and it takes more energy.

Cool that you made this Videos about the Motor, i saved some, if i got a Problem i know what to watch :D

Great channel! Keep the vids coming and thank you!

@vegasromaniac

5 жыл бұрын

Thank you for watching

Nice to see they come apart fairly easy.. yes grease is good but not too much .. oh and if you want to get rid of the out-of-balance wheels either remove the reflector or add a second reflector opposite side to balance it out. :-)

Ancheer has a youtube channel on here called "Ancheer sport" showing various videos on repairs and replacement as well as full assembly on various models.

@dennycelestinohybridspecies

Ай бұрын

@slipinn Thanks, I didn't know Ancheer had that youtube channel and now I have subscribed.

Makes total sense, thanks for the easy fix with out the $$ or time.

@vegasromaniac

4 жыл бұрын

It worked well for me

Well done, very helpful, thank you...

You right, the motor hub gears need to be lubricated reguraly, and by the way the gears are replacable, i just replaced mine from aliexpress website, and ebay have them too, because the clutch just stock, but the problem is you need to buy the right size gears by measuring diameters of the gear assembly, by using special diameter tool measurment to get accurate numbers or you can use regular measurment tabe like i did but it is a hight probability to ge the wrong size small.or biger.

If they make a hole there wont the greece comeout from their? What about water going in their and rusting?

A "zerk" fitting is a grease port that works with a grease gun.

Wow nice video! Thanks

Thank you for this video - anyone found a seller for replacement nylon planetary gears? I know the mid drive gears "8-Fun Bafang T36" are readily available on ebay, but not sure if they would be the same? Anyone can shed some light on this thank you.

Thank goodness it's so easy

Do you get this shake on your wheel when the motor spins? I heard GEARED motors always have that but i couldnt see it on your video. If so, how do you COUNTER that?

I would use a bike like that mainly on flat ground. They did not put a disconnect on that motor "cringe" That will suck when it really needs parts or replacing. You are a handy guy build your next ebike.

Great video my man.

@vegasromaniac

5 жыл бұрын

Thanks

I really like your channel, please I have a e fat bike but I’m having a problem with it. The problem I’m having with it is that, it’s use to STOP and then repeat again when I’m driving. Sometimes it move 30 m/h to 00:00 m/h please can you help me to solve the problem?

Silicone Grease for the nylon cogs. Dont use lithium or grease for metals. The grease nipple is a great idea and expect to see it on top end hubs soon.

Hey RoManiac- You've got to get a spoke wrench and do something about the spoke tension in that rear wheel. I can tell just by looking that those spokes are becoming WAY too loose. Maybe take it to a bike shop and have it looked at if you aren't good at wheel work.

Does anyone know what size wrench is need to disassemble it thank you

nice to see other people has a tennis ball on a string in their garage!

Amazing.

Excellent

6 year old video and who knows if you'll evr see this but...is there any way i can replace those gears? because mine are destroyed. i had no idea they needed grease and they've been worn basically flat. >_< you said you didn't know in video but maybe you've got some info now?

Can't wait to change hub motor on my fat tyre ebike, been looking at it for past 3wks, sayin I'll do it soon 😂 well weather bliss in London UK n it's fat tyre ebike time 💋💯👍🥳🇬🇧👍

After how many miles did you need to do this?

You have to open it to grease it?

very helpful tks

Thanks for the info but my gears blew up I'm gonna take my bike apart see if I can save my e-bike only road bike for six months

thanks,maybe a non petroleum based lubricant for the gears

thanks for this video i have the wheel off and was just putting off buying a flywheel puller turns out its all one unit... lol fml

i put a hub motor on my trike. When i start it from a dead stop i always help it to get going by pedaling. This is some thing I learned riding a pedal assist only bike.

@tepastrick2276

6 жыл бұрын

Supposedly this takes some of the strain off the motor and may increase the life of the motor. I was recommended to do this with my electric bike and now have ridden it for 8 years. My meter shows over 19,000 miles on it, but I'm doubting it as police speed trap shows my speed at about 4mph below my indicated speed. Really not sure which is correct.

Thanks for the video. I'm trying to find the exact hub motor's name and model. Can you tell me the exact serial number written on your hub motor? I got the ancheer 20 inch folding bike with disk brakes (bike model : AM001908). My hub is labeled : CZJB01-36V20" 171001512 . I think the hub motor is made by the "Changzhou Jiabo Machinery Manufacturing Co., Ltd." I'd like to upgrade my 36V 15amp generic controller to a 48 volt one (id also upgrade battery to 48V obviously) so I can gain RPM and top speed. So I'm trying to figure out if the hub can take 360Watts of power without too much heat. Whats the label number on on you hub ? I'm trying to figure for exact specs (max watts, volts... gear reduction ratio, etc) and potential need for spare pieces etc in the future..

can you use chain lube o nthe gears? mine makes an odd noise when givin electric power, it started in the middle of a ride with slight rain

@vegasromaniac

5 жыл бұрын

Gresie it's a must needs to be thick, oil will just come out

Ummm, doesn't that grinding and lack of power at the end of the video indicate a problem. I have two of these (brand new) and this just started on one of them. It will spin the wheel but there is no power (I can grab the wheel and hold it). Any thoughts? Thx

@s2tperfo

4 жыл бұрын

Did you solve this problem? I know someone with what sounds like the same problem.

hi, i hope you can also do instructional on how to remove and replace the sealed bearings, coz i feel some play on the motor hub wheel.

@vegasromaniac

3 жыл бұрын

I already sold that bike and got another one, if it will happen I sure will make a video

I know you said the motor was making noise and I think it's new bike, so what makes you think it needed more grease than what was there from the factory? I know grease is good but to much is bad. Can't tell from the video if those holes behind the gears are open to the windings but if so, slinging excess grease thru them would not be good. As long as they are sealed from each other (windings/gears) seems like something I'll be keeping an eye on. I just got the same bike and you assembly video was a great help and time saver. The supplied instructions are pretty useless

@dblock2626

7 жыл бұрын

Wild Bill i have 3 Green Light Cycle Urban Ryder 26" bikes. their not bad, all bikes have well over 3000km and only one battery has crapped out and one motor but the motor is possibly fixable.. use them daily in the summer time and even thru most days of the salty Canadian winters. overall decent bike but company is terrible when it comes to parts and standing behind warranty. they told me battery could be fixed in 8 months its been a year since i sent it to them lol only maintaince ive ever done or do is test the battery and clean the terminals.. that noise thats this bike makes when u give it gas at a stand still makes me cringe.. thats happened to me twice or three times in the entire life of my bike and everytime i hear it, i cringe and let off the gas. Usually only happened in the trails at a slow spot where i was trying to use all motor to get up a small hill instead of helping it along by peddling either way not a good sound and potentially a manufacturing mistake if your bike is brand new and makes this noise.

@stephanel.6724

7 жыл бұрын

you are worrying me dblock2626 as I am just about to buy an Urban Ryder myself. Are you having issues with warranty service or getting out of warranty parts like the battery?

@dblock2626

7 жыл бұрын

Stephane L. Yes. I have been waiting for a replacement battery since March 2016. Still nothing yet. They are good bikes but the company and the people that work for them are a joke... I order my parts on Google. JUST HAPPY they still work. Alot of servicing needed to keep bike it good shape. FORKS gotta stay clean, chain greased, tires filled (it's a bitch when they pop), error codes,.. still better then alot of ebikes out there but they owe it to China. Maybe I'll do a review video one day of the 3 bikes I got and the shape they are in after years of use

The motor on my new ancheer folding ebike went bad. Is there a replacement anywhere? On the motor it says 26" 36V17101400 H Will any other motor fit?

@vegasromaniac

6 жыл бұрын

Ebay you can buy the hub.. Or the entire wheel

@shapeshifter8986

6 жыл бұрын

Unfortunately not for this particular ebike (aloy rims). ..I decided to repair the motor by myself. It´s easy, only the copper windings have to be replaced. 75 meters of insulated 0.6mm wire. 5x5 meters for each of the 3 phases.

@vegasromaniac

6 жыл бұрын

@@shapeshifter8986 that sounds like a great video

Does anyone know where to find the little pin magnet that goes between the clutch (planetary gears)????

@daveed1797

Жыл бұрын

Online. There is a name for them Make sure you get the dimensions right for the new one

Thanks for sharing dude

i just bought a new bike Ancheer on ebay for 485.00 dollars. what type of grease do you use for the motor? the batteries cost half the price of the bike! you can't unplug the wire when take the wheel off?

@vegasromaniac

5 жыл бұрын

You can unplug it but you gave to take the controller box off,

@simonm1447

5 жыл бұрын

I have a E Bike with a similar motor from Bafang. I use silicone grease because it has no oil in the grease which can absorb and pollute the rest of the motor. Also silicone grease is not aggressive to plastic. I think the white grease originally in the motor is something similar, but no standard grease made of mineral oil.

Does the hub motor have a brand name on it? Wondering if I can buy the same motor but 500w instead of 250 and just swap it out?

@vegasromaniac

5 жыл бұрын

Yes you can swap it out but you need to get the electronics with itx not just the motor

@bobravenscraft5376

3 жыл бұрын

Watts V x. Ah 250 to 500 same

Have you had your rear wheel become acentric?

Hi, what type of "lithium grease" did you use?

@MrKrimerofsoldier

3 жыл бұрын

teflon or white grease for bike not oil oil: outside especially for the bicycle chain and grease for inside like mechanics rotation I use for 25 kg e-bike single speed 500w 48v LITHIUM TF2 40G grease and Weldtite TF2 Teflon Grease Tube.

hello i got one last year but now i loosing power and turning off when i use it can you help me ?

@vegasromaniac

6 жыл бұрын

Loosing power, that is not good, does it just die? I don't know man, you need to have somebody that knows electronics look at it

@tepastrick2276

6 жыл бұрын

Possibly a cell in the battery pack going bad. Had this happen with my first battery(36v 10Ah). Replaced it with 36v9AH and used it for about 6 years. With diminishing mileage, replaced it with 36v20AH. Changing AH does not affect motor but does change mileage.

@Jonmc511

5 жыл бұрын

I had that happen to me 4 months ago on my Cyclomatic bike" the other inexpensive amazon ebike" where I had the battery display keep turning off while riding. I fixed it by taking the battery off and spreading the connectors to make a better contact with the battery base. After that I no longer had problems till this day. (knock on wood...)

My hub motor gears are worn where can I buy them any idea ?

@vegasromaniac

6 жыл бұрын

Never had to search for part, but if there is a place to have them, is ebay

How often can you put the grease on the motor?

@vegasromaniac

Жыл бұрын

As often as you want

Can you make it go any faster?

@ianmangham4570

2 жыл бұрын

Yes

Out of curiosity, do you remember how many teeth the white parts had please?

@mrsteetimney

3 жыл бұрын

For reference if anyone would like to know, when I opened it up, mine was 36 teeth nylon gear

There's a common problem with these ...clicking sound coming from inside.....In my case the magnets are Ok and are in place...and the gears are now greased....and still clicking....so it's a problem...and I dont' feel like taking the motor apart..and don't have a machine shop in my apartment.....ideally i'd love to just buy a new motor and splice it in from the wire....cut and spice...red to red white to white etc. .There's a video someplace but shows a huge amount of work replacing the motor - taking apart the whole controller box....no thx lol

Try unhooking the cable

Don't think it's recommended to use lithium grease on those gears..

Can you believe they didn't bother to put a detach for the motor's power cable? Unfreaking believable. That's actually why I'm here, trying to figure out how to swap a god damn inner tube. You mean just to swap an inner tube I'm going to have to take the god damn motor out!? Otherwise I have to open the power controller box and divorce the wire in there... This is OUTRAGEOUS.

@Netdinex

6 жыл бұрын

All you have to do is loosen the motor wire from the frame and then take the wheel off by removing the 2 nuts.. The wire will still be attached but u can still change the inner tube.

@danielvincentkelley

5 жыл бұрын

@@Netdinex - That's bullshit, the 2 times I did that, the tire exploded on the way home from the gas station where I went to use the compressor pump. I clipped the wires and added my own quick disconnect in the form of microphone plugs, problem solved.

@chris-rh2ex

5 жыл бұрын

Just unplug the two wires from the controller!!!

@ianmangham4570

2 жыл бұрын

Lmao you can't be serious

In that little drive you took at the end, it still didn't sound good to me.

@vegasromaniac

4 жыл бұрын

i discovered later on that the bike just needed to get some bolts tighten up , was a bit loose , it was the bike that rattled

A grease hole in the hub would let dirt and water into those gears. You don't want that

@alienmechanic8696

7 жыл бұрын

just put a screw plug in the hole or a grease nipple

@thedancingalien7766

6 жыл бұрын

FatHead970 put a tape over it

@777fiddlekrazy

6 жыл бұрын

I WAS THINKING A HOLE, THREAD TAPPING THEN PLACING A ZERK FITTING. YES, HOWEVER, I WOUDN'T THINK OPENINGS TO WINDINGS GETTING FLOODED WITH GREASE WOULD VERY GOOD AT ALL UNLESS A DAM COULD BE CREATED TO KEEP GREASES OUT OF WINDINGS. THOSE HOLES? MAYBE ALSO NEED GOOD CLEARANCE TO HELP COOL THE WINDINGS!

Bigger battery more amps and watts. 36 x10=360

Where is that accent from if you don't mind....Not a hater I just am fascinated by accents ...My guess is near Poland?

@vegasromaniac

5 жыл бұрын

Romanian

@jaymercha3859

5 жыл бұрын

@@vegasromaniac My guess was only 500 miles away or so. I thought Romaniac was short for ROMANTIC LOL :)

@vegasromaniac

5 жыл бұрын

@@jaymercha3859 haha, many thought that also

I'd upgrade to metal gears !

Where are you from? English second language?

@vegasromaniac

6 жыл бұрын

Yep, living in Vegas from Romania, aka Vegas RoManiac

I think it is a seized sealed bearing. But idk. Wierd.

Wow cheap and bad design that power cable does not come apart for service. Good video though thumbs up.

@vegasromaniac

5 жыл бұрын

Cheap design for sure

It's an ancheer,they're a piece of junk, you'd be better off unscrewing the screws on the controller box and unplugging the wiring harness

Seal the hub and try gear oil. Just enough so it circulates around.

What kind of sensors are in the motor of this e-bike?

@user-jy9xi6li2j

3 жыл бұрын

??